Achievements to date balance

Hello! Please help me with the following - I need to look at the balance of the achievements of know how many achievements left, but can't find where the information is. The report I downloaded does not have these data.

You can buy the achievement here.

DPS purchasing options

Tags: Digital Publishing Suite

Similar Questions

Distributor of data balanced

Hello

I installed BDD on my local machine (32 bit) and created a SSIS by using this, it works fine without problem.

When I deployed in our staging environment, I get an error when I run the job.

Error:

The component is missing, not registered, no expandable or missing required interfaces. Component ' data balanced, clsid distributor could not be created and the error code returned 0 x 80070005 "access denied". ". Make sure that the component is registered correctly.

I installed this in the staging environment but still getting the same error.

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

http://social.technet.Microsoft.com/forums/en-us/home

http://social.msdn.Microsoft.com/forums/en-us/home

buffering of data from PLC in the Citadel loading Lookout 6.2 database?

We test a process application small belvedere<200 i/o="" that="" is="" designed="" for="" continuous="" application.="" this="" is="" not="" a="" critical="" process,="" therefore="" we="" don't="" want="" to="" commit="" to="" duplicate="" lookout="" systems.="" however,="" we="" would="" like="" to="" buffer="" 24="" words(16bit)="" in="" the="" plc="" for="" 5-10="" minutes="" so="" we="" would="" not="" loose="" that="" data="" when="" the="" computer="" running="" lookout="" does="" a="" restart="" for="">

Our problem is how to achieve these data in database of LookOut citadel in the appropriate time frame.

If it is not possible with the original track to load this data into the Citadel, can we load in another database file and display these data separately?

Any suggestion would be appreciated!

Ryan,

Thanks for sharing this info with me!

Your help is greatly appreciated!

11.1.2.3 - data loading planning?

Hello
Another question from newbie - beginner to 11.1.2.3 for which generous points are once more available; I checked the manuals for 11.1.2.3. but do not believe they have removed this feature available in earlier versions of the planning, can someone confirm please?
In the previous version of the planning (10.x) he used to be a GUI tool based which facilitated the data and mapping the data transformations for easy loading of data in Hyperion Planning without using a tool such as the ODI via flat files or table of database (no disorders, built around Hyperion 'API') from other sources.
Is it equivalent to 11.1.2.3. and if so someone can tell me the navigation path please?
As said I have reviewed manuals and as said I don't think I'm following = > load utility contour, FDM Data Integrator adapter, architect of Management Performance.
But it may be "planning hierarchical Load", can anyone confirm if this is the case (the manual is sketchy to say the least) and if so provide path navigation or even better, a link to a simple example...
n. b. I keep loads of metadata (members, properties members, parent / child et al) and balance data (balances in cubes loading).
If it isn't available in Hyperion Planning the form I describe there is no reason NOT to apply the rules of loading EAS to manage data and load balances?
Thank you very much
Robert.

You could try to launch the Foundation > configure the web server option in the Configurator of the EMP.

See you soon

John

http://John-Goodwin.blogspot.com/

How to calculate stock data aging
How to calculate inventory aging of data:
```
_*PRS_DTE*_     _*PRD_COD*_     _*PRD_TYP*_     _*DRB_QTY*_     _*CRD_QTY*_
15/07/2011     2012001234           1                           100                              0
15/08/2011     2012001234           1                           200                              0
16/08/2011     2012001234           1                           0                              50
15/06/2011     2012001234           1                           125                              0
15/09/2010     2012001234           1                           150                              0
```
On top of the data, balance the stock of data is produced * 525 * by subtracting CRD_QTY from DRB_QTY. Now his result of aging from 18 September 2011 "should be like this:"
```
_*PRD_TYP*_     _*PRD_COD*_        _*90 Days Stock*_     _*Less than 90 and from the start of year Stock*_   _*2010 Stock*_   _*2009 Stock*_   ...and so on upto previous 5 years
         1                2012001234                   300                                            125
         100                    0               ...
```
Can I get this SQL result? I do not want to write cursors and loops to get the above given the result even if it is possible.
Hello
kamranpathan wrote:
Dear Frank, thank you again for an impeccable answer. Sorry for a delay feedback coz I was sick of a fever. I tested the provided query u n that has worked well. but I did not understand then u points marked the end of the answer of the urs:
```
Prs_date is a DATE: don't try to INSERT a VARCHAR2 value into a DATE column.
```
If 20/SEP/2011 ' is not the correct format, so what fix the Date Format?
In Oracle SQL, anything inside single quotes is a VARCHAR2. (There is an exception; I'll be back later.)
"a,"
'2' and
"the square root of 9'.
are all inside single quotes, so they are VARCHAR2s, not numbers. A human being who sees these chains might think of figures, but they are still VARCHAR2 strings and not numbers.
20/SEP/2011 '.
'September 21, 2011', and
'Yesterday '.
are all inside single quotes, so they are VARCHAR2s, not DATEs. A human being who sees these chains might think of DATEs, but they are still VARCHAR2 channels and not dates.
When you use the wrong data type (for example, when you use a VARCHAR2 in a place where we expect a DATE) Oracle will try niot very hard to trigger an error. It will try to convert a DATE VARCHAR2. Sometimes it can work, other times it cannot. It is never a good idea to expect that such implicit Conversion will work; You must always use the correct data type instead. For example, the prs_dte of the aging_test table column is a DATE. When you say:
```
INSERT INTO aging_test (prs_dte) VALUES (x);
```
Oracle expects x as a DATE, so do not put some other datatype as a VARCHAR2 in place of x.
The TO_DATE function returns a DATE, so a correct is to INSERT a line in aging_test:
```
INSERT INTO aging_test (prs_dte) VALUES (TO_DATE ('20/SEP/2011', 'DD/MON/YYYY'));
```
This is an example of a +Explict Conversion +. The TO_DATE function expects two arguments to be VARCHAR2s, and that's exactly what they are in the example above: the two arguments are of the literal string, enclosed in single quotes.

There is an exception, as I mentioned. When the DATE keyword (or TIMESTAMP) comes immediately before the first single quote, then single quotes, everything that comes between them and the keyword itself form a DATE literal (or a literal STAMP, but I'll just talk about DATEs in the future). The stuff between single quotes must be in YYYY-MM-DD format, otherwise you will get an error. So another acceptable way to enter a row in the aging_test table is:
```
INSERT INTO aging_test (prs_dte) VALUES (DATE '2011-09-20');
```
It is only as good as in the example above (those used TO_DATE), and has the same results. You can use any you like.
```
the age_prd can never be ' 'Less than 90 and from 01/01/2011'. 
```
Yes my dear, in my case that I really need this period of aging, I don't know why, but sometimes, being a service Department (IT), we fullfuil insensitive logic of user.
Remember how BUSINESS works.
When you say
```
CASE
    WHEN  c1  THEN  r1
    WHEN  c2  THEN  r2
END
```
the c1 State is evaluated first. If c1 is set to TRUE, then the CASE expression returns r1, and the rest of the CASE expression is not evaluated.
What happened in this CASE of expression, where x is a NUMBER?
```
CASE
    WHEN  x > 0  THEN  'Positiv'
    WHEN  x = 2  THEN  'Zwei'
END
```
This CASE expression will never return 'Zwei', because the condition "x = 2" is just a special case of the prior"x > 0". If this CASE expression is executed when x = 2, then the 'x > 0' condition is evaluated, it turns out be TRUE, and "Positiv" is returned. The following condition is not even considered.
In the expression you have posted:
```
`        Case
             When Age.Prs_Dte Between (Sysdate - 90) And Sysdate Then
                       '90 Days'
             When Age.Prs_Dte Between (Sysdate - 61) And Trunc(Sysdate, 'RRRR') Then
                       'Less than 90 and from 01/01/2011'
...
```
the value 'less than 90 and since 01/01/2011' will never be returned. the condition "Age.Prs_Dte between (Sysdate - 61) and Trunc (Sysdate, 'RRRR') ' is a more narrow condition that" Age.Prs_Dte between (Sysdate - 90) and Sysdate. Any SYSDATE value which translates by "Age.Prs_Dte between (Sysdate - 61) and Trunc (Sysdate, 'RRRR')" TRUE will as a result in the previous state, "Age.Prs_Dte between (Sysdate - 90) and Sysdate" being TRUE.

If you need an expression BOX which will return sometimes 'less than 90 and since 01/01/2011', then do not use the one you posted. I don't know what you should use, because I do not understand your business needs. Post some sample data (CREATE TABLE and INSERT statements for a table with the columns prs_dte and sys_date), display the results you want sample data and explain how you get these results from these data, and someone will help you write a CASE expression that produces these results.
```
Only use "date3 BETWEEN date1 AND date2" when date1 and date3 are always midnight. 
```
I really did not understand what point completely.
Sorry, I wasn't very clear. What I meant is that a lot of people make mistakes in using BETWEEN with DATEs, because they forget that all DATEs include hours, minutes, and seconds. If the hours, the mionutes and seconds all arrive at 0, then BETWEEN works the way they expect. When the hours, the minutes and seconds are not all 0, then these people are often confused.
For example, in my time zone is currently about 17:58 September 23, 2011, so at present, nor this condition:
```
SYSDATE  BETWEEN  TO_DATE ( 'JAN/01/2011', 'MON/DD/YYYY')
         AND      TO_DATE ( 'SEP/23/2011', 'MON/DD/YYYY')
```
or this condition
```
SYSDATE  BETWEEN  TO_DATE ( 'SEP/24/2011', 'MON/DD/YYYY')
         AND      TO_DATE ( 'DEC/31/2011', 'MON/DD/YYYY')
```
is set to TRUE. Which can be confusing.
If change us one to tell us "SEP/24"instead of "SEPT. 23." /', then it would be a point in time (that is midnight on 24 September) when the above two conditions were TRUE. Which can be confusing.
Similarly, if we leave "SEP/23 ' in the first condition and change the second condition to say" SEP/23 ' rather than ' SEP/24 ', then there is also a point in time when both conditions are TRUE.»»» Which can be confusing.
I admit it is subtle and can be difficult to understand if you don't really understand how work DATEs.
If all goes well, it is easy to understand: don't use not BETWEEN with DATEs. The results are not what you expect if you don't really understand how work DATEs.

Breaking using a concatenated data Source
Greetings,

I'm breaking a report using a concatenated data source. I have a SQL query break implemented that works very well, but I'm not sure how to handle the option "Split." I have a data model that extracts data from multiple queries, like this:

DETAILS_A
Select * from table_a
where payee_id in (: p_payee_id)

DETAILS_B
Select * from table_b
where payee_id in (: p_payee_id)

So, if I choose "Split by" Details_A_Row/Payee_ID, then the Details_A data are distributed properly, but reports that generate don't split the Details_B information correctly. I find myself with reports where a beneficiary has information for another beneficiary of the data source Details_B. How can I specify that the report should also split/filter the news of Details_B?

To put it another way, what I like to do is really going through a list of parameters (paid IDs in this example) and generate a report for each parameter. Is the most effective way to do it?

Research forums, it seems that I might be able to achieve using data models as my model of data instead of SQL queries. I'm on the right track with that? If so, you guys have all the useful links on how to create data models?

I use Publisher version 10.1.3.4 BI

Any help is appreciated!

Martin
Here is a good starting point:

http://download.Oracle.com/docs/CD/E12844_01/doc/BIP.1013/e12187/T421739T434255.htm

See you soon

Jorge

to get the average balance of an account
Hello all :),.

I have the table according to 'account_details '.

account balance transaction_date
1 100 1/1/2011
1 200 1/5/2011
1-100 1/20/2011
500 1 31/1 / 2011
1 200 3/3/2011
2 100 6/2/2011

account-> account number
Balance-> This account balance
transaction_date-> date of the transaction.

I am required to calculate the average balance for each account for each month of the current year given only positive balances only. Phew! try to get any easier...

ex: account = 1
AVG (for January) balance = [100 * (5-1 + 1) + 200 * (31-5 + 11) + 500 * (31-31 + 1)] / 31
(see-100 was ignored)

AVG (for Feb) balance = 500 * 28] / 28

I need to display the account number, the month and the year and the average balance for that month. [for all 12 months of the date of today ' hui]

Thanks in advance for all the geniuses out there :)

PS I am using oracle 10 g

Published by: user12288152 on April 8, 2011 12:51 AM
Hello

Whenever you have a problem, please post CREATE TABLE and INSERT statements for your sample data and also to post the results desired from these data. It's great to describe the results, but don't forget to actually post them, too.
Here are the results you want?
```
`  ACCOUNT A_MONTH   AVG_BALANCE
---------- --------- -----------
         1 01-JAN-11      196.77
         1 01-FEB-11      500.00
         1 01-MAR-11      260.00
         2 01-FEB-11      100.00
         2 01-MAR-11      100.00
```
Always tell what version of Oracle you are using. The following query will work in Oracle 10 (or higher).

A way to do what you asked is:
(1) to generate a list of all the dates in whioch you are interested
(2) - outer join this list to your real data (balances only)
(3) use the analytical LAST_VALUE function to copy each subsequent dates with NULL balance balance (I called this effective_balance)
(4) take the average, per month
It's
```
WITH     all_dates     AS
(
     SELECT     start_date + LEVEL - 1     AS a_date
     FROM     (
               SELECT      DATE '2011-01-01'     AS start_date
               ,     DATE '2011-03-10'     AS end_date
               FROM     dual
          )
     CONNECT BY     LEVEL     <= end_date + 1 - start_date
)
,     daily_balance     AS
(
     SELECT     TRUNC (da.a_date, 'MONTH')     AS a_month
     ,     de.account
     ,     LAST_VALUE (de.balance IGNORE NULLS)
               OVER ( PARTITION BY  de.account
                      ORDER BY          da.a_date
                    )               AS effective_balance
     FROM          all_dates     da
     LEFT OUTER JOIN     account_details     de  PARTITION BY (de.account)
                             ON     de.transaction_date     = da.a_date
                             AND     de.balance          > 0
)
SELECT       account,       a_month
,       AVG (effective_balance)     AS avg_balance
FROM       daily_balance
GROUP BY  account,       a_month
HAVING       COUNT (effective_balance)     >= 1
ORDER BY  account,       a_month
;
```
Step (1) is made in the first auxiliary request, all_dates.
Both steps (2) and (3) are made in the following subquery, daily_balance.
Step (4) is made in the main query. This can be done in the same query as step (3), because the aggregate functions are calculated before analytical functions in the same query.

Of course, you don't have to encode in the start_ hard and end_dates, as I did above. You can switch to the query into variables, or them are derived from data in the tabel and/or SYSDATE or any combination of methods.

Published by: Frank Kulash, April 8, 2011 08:39
Added to the explanation.

More beginner questions

Hello

Getting started with Java development and fairly new to BlackBerry, so I have a few questions that I hope are easily treated.

(1) I am aware that there are different levels of API for Java on BlackBerry. I need to write an application that is a little more sophisticated than a web app, but not need features like GPS or motion control. I would like to reach a large part of the audience with a single application. Is BlackBerry JDE 4.0 the best choice

(2) should what screen size I write to? Is there a small number of standard sizes, or is it everywhere in the jury? Are there still many people using monochrome displays or can only be ignored?

(3) at some point I need to show my boss of information on what the BlackBerry user market looks like in terms of peripheral distribution and give him a pretty good guess as to what percentage of this market will reach our application. Where can I find this information?

(4) I really need one of the features is the ability to view external documents from within my application. These documents are mainly PDF files, Microsoft Word or HTML documents. Is it possible on BlackBerry without writing my own code to decode documents? (For example on the iPhone, I can just open a document viewer and pass it a URL).

(5) I saw some references to a 'business' server or a "synchronization server" that I do not completely understand. In the application, I want to write, all I need to do is to make a HTTP request to a server on the internet and analyze XML data that it returns. I guess that will be OK? Will I have access to a XML parser and HTTP connection object somehow? There is a limitation with regard to what I can connect to the servers?

Thank you

Frank

I'll answer 1, 2, and 5 for you, although others may have answers to spare.

1. it is a matter of how many devices you want to achieve. I think that 4.6 is to achieve a good balance between compatibility and the camera, well that others may say, 4.5 or 4.2, for legacy devices.

2. I don't think you need worry too much about the size of the screen, unless you do things that are explicitly graphic, want to do your own drawing for a game or something. If you add a standard user interface elements, should ebb of things, but you obviously test on multiple devices if you are worried a lot about this.

5. you can certainly analyze content XML on the internet (there are DOM and SAX parsers), but you have to be concerned about the methods of connection on a mobile device, if the connection is by proxy through a corporate server, through the Blackberry Internet Service in public or through the carrier's internet gateway. There are here some guides on how to handle this.

Overview unwantedly convert a color to transparent (!)

Hello

I use a snippet to open png files and save them to gif format (to reduce the size of the file).

The files are a book cover, including an orange background, with red, white and dark gray text and graphics (curves).

Yesterday, it worked well.

Today when I save as gif red color in the image disappears. I guess that it is transformed into Transparent. I see where the red text and graphic lines were is the background orange.

Preview was not doing this yesterday.

Today it is the same on the png files that I created yesterday, so I'm sure that change is in the preview, not Inkscape (which I used to create the PNG).

I do not use the lasso or other tool to select all areas of the picture and enable transparency.

I open the image, choose the export file to gif format and with the box checked and checked alpha, the color red is disappearing and I don't want it.

Any suggestions much appreciated.

Overview 8.1 (877.7)

10.11.6 OSX

Thank you.

Do not use the gif. It is an older format, limited to 256 colors. It is quite insufficient for most uses (with the exception perhaps of dubious of these short "animations").

One of the unique features of gif should have 'transparency' - but which has been achieved by stipulating a particular table as color being transparent (and not, as in modern formats, by adding a fourth channel, called "alpha channel" to the series of red, green and blue).

Somehow the red in your translation got to be designated 'transparent color '.

If you want to reduce the size of the file, try saving to jpeg and quality change to achieve a good balance between size and quality.

Arduino MyRIO via UART communication

Hello

I am trying to achieve the data between MyRIO1900 and Arduino via UART communication.

Interface UART on Arduino Uno is minus 16 MHz clock.

The UART to myRIO can set baud rate. However if the frequency is different from the Arduino, the connection will not be built.

How to set the frequency of MyRIO UART? What is the default frequency of MyRIO UART? Where can I find this setting?

I don't understand. If the transfer speeds are the same, you should be fine. The clock frequency is used to calculate the bit rate and is the rate that data is transmitted/received.

Z800 upgrade RAM & GPU - HP Performance Advisor WARNING

Hello guys,.

I would appreciate if you can help me with this.

HP Performance advisor, gives me the following warning:

'Memory '.

Maximum memory performance is achieved with a balanced configuration memory evenly distributed throughout all channels of active memory. When there is more than one DIMM connector per channel, fill the inner layer closest to the CPU before adding memory to an outer layer.

Technical mixed size DIMM - memory is optimized when all the DIMMS in a layer have the same size. »

I have attached 2 photos.

The first is the current state of the workstation with mixed sizes of RAM 1 GB & 2 GB modules.

I don't want to throw my 2 GB modules. I want to just replace the modules of 1 GB a 4 GB modules,

so the configuration will look like the 2nd picture, I joined.

Is this feasible?

A second thing is I want to upgrade my GPU.

Currently a Nvidia Quadro 2000 is installed.

I want to replace the GPU with a Nvidia GTX Titan.

What should I take the exam prior to the GPU upgrade?

Thanks in advance.

The configuration of your memory project (second photo) is OK. If I read correctly the image, you put 4 GB modules in the black connectors and the 2 GB modules in the white connectors. This gives a configuration balanced, that is, each channel has the same 2 types of memory, so that you will not get the message memory unbalanced and could even get a performance more.

Make sure that the memory of 2 GB and 4 GB is of the same type, correspondence ECC (or not), registered (or not), and if the chips of memory are x 4 or x 8. Mixture of different types of memory will not work.

HP does not officially support the nVidia GTX Titan, but it should work with the following precautions:

-It will run at speeds PCIe Gen2, Gen3 not (but this should be fast enough).

-From the picture I've seen of the Titan, he seems to have a 2 x 3 and a 2 x 4 power connector. The Z800 has 2 power connectors for 2 x 3 for graphics. A cable adapter to go from 2 x 3 to 2 x 4 is necessary to put the card.

eMachines EL1850 new RAM not working not

Hello everyone!

I wanted to upgrade RAM from 2 GB to 4 GB, so I looked at the label placed on the current RAM and tried to find the best match. I bought and tried 1 x 2 GB Kingston and 2 x 2 GB Corsair (more), but unfortunately none of them worked. After installation and turn on the PC, it was a constant noise for a long time and I couldn't do anything. Nothing on the screen. Then I tried one at a time into the two slots with the same result.

What's wrong? What I am doing wrong?

Thanks in advance for your time and help!

The current RAM:

UNIFOSA 2 GB GDDR3 - 1333 128MX8 1.5V EP, GU512303EP0202

I tried (all new) RAM:

Kingston 1 x 2 GB memory DDR3 1333 MHz Non - ECC, CL9, 1.5V, memory unbuffered DIMM (link)

Corsair 2 x 2 GB memory DDR3 1333 MHz Non - ECC, CL9, 1.5V, memory unbuffered DIMM (link)

Motherboard: G41T-AD V: 1.0

BIOS: P01. B3 (the latest version)

Upgrades successfully achieved to date: replaced Intel Celeron E3400 with Intel Core 2 Duo E8500

Fortunately, I found someone who was trying to sell the same Unifosa modules, 2 x 2 GB. They work perfectly!

I want to thank all the people who have tried to help me!

Question about Equallogic snapshots.

Hello forum

I could not confirm this, but instant never need to commit anything to the basic volume?

Lets say I have 10 snapshots and delete the oldest? There will be a load of e/s to validate these instant changes?

Also, if someone could point me to any type of indepth explanation of this technique of snapshot, I would be interested to read all that.

Thank you!

N ° current data are already on the base volume. There is nothing to commit. Only if you are completely restoring a volume from a snapshot will be there in writing for the base volume.

On the site of Equallogic Support KB:

Solution title TABLE: how the snapshot reserve space is allocated and used

Solution details Snapshot Reserve Allocation and use

-------------------------------------

In a series group PS, snapshots can protect against errors, of a volume

virus or the database. A cliché represents the content of a volume

at the time you created the snapshot. Creating a snapshot does not disturb

access to the volume, and the snapshot is instantly available allowed

iSCSI initiators.

Before you can create snapshots for a volume, you must allocate space (called

snapshot pool) for snapshots. You set the value of the snapshot reserve

When you create or modify a volume. Snapshot reserve benefits from the same

as the volume of the pool data.

When snapshot data consume entire supply snapshot, the Group remove is

the oldest snapshots to free up space for new images or sets the volume and

snapshots offline, according to the policy you selected for instant recovery

space.

The functionality for creating snapshots is called hybrid allocate when writing.

Operation of sharing and snapshot of the page

-----------------------------------

A PS Series Group organizes the physical storage into logical segments called pages.

Each page is composed of several logical blocks. This is similar to the way file

systems combine areas of physical disk in 'clusters' or 'chunks '. Each page has

a reference count which records the number of volumes and snapshots that share

the page.

When you create a volume, the group creates an internal table, called the volume

table, which contains pointers to pages that use the volume. When you create

a snapshot of a volume, the group creates a snapshot table by making a copy of

the volume table, which is usually an operation in memory that the Group

run in a transactional manner. For each page of volume in use, the support group increases the

reference count to indicate that the volume and the snapshot share page.

Because the group does not move or copy the data or allocates a new pages, photos

are fast and efficient.

Reserve of the snapshot stores the differences between the data on the volume and snapshot data

(in addition to differences between the data of multiple snapshots). When you

first create a snapshot, the page for the volume and the snapshot tables are

In brief identical copies and the snapshot consumes no snapshot

reserve. A reading of the same logical block of the volume application or the

snapshot returns the same data because the application is reading from the same page.

However, if you write a page that has a volume and a snapshot of share, snapshot

reserve is consumed.

Here's a simplified example of a snapshot operation. In general, no.

additional I/o operations are needed to manage the data volume or snapshot.

However, other internal operations can occur due to virtualization and

data balancing on berries of the PS Series.

If an application performs a write to 8 KB for a volume containing a snapshot, the

Group:

1. determine what page is modified by the write operation.

2 - If the page is not shared, writes the data to the page.

3. If the page is shared:

. (a) allocates a new page of disk space and reduces the instant to reserve

. the volume of a single page.

. (b) update the page of volume table to point to the newly allocated page.

. (c) mark the newly allocated page as having new data on the volume and the references of the

. original page for unchanged data.

. (d) writes the data to the new page.

When writing is complete, if you read the data on the volume, you have access to the

new page and new data. However, if you read the same logical block of the

Instant, you get the original data, because the snapshot will always point towards the

original page. Similarly, if you set a snapshot online, write to the snapshot.

feature hybrid write protects the original data volume by allocating

a new page for the new snapshot data.

Only the first page of writing to a volume shared (or snapshot) consumes additional

snapshot reserve. Each subsequent entry is considered identical to a writing on a

non-shared the page because the original data are already protected.

Functionality similar to hybrid allocate when writing is used in cloning operations.

However, unlike when you create a snapshot, cloning a volume immediately

consumes space additional group. If a clone is moved to another pool, data

is copied during the operation of moving pool.

Restoring a Volume from a snapshot

----------------------------------

Because of the layout table, restore a volume from a snapshot is very

quick. First of all, the group automatically creates a snapshot of the volume by copying

the volume table to a new table of snapshot. Then the Group transposes the page tables

the volume and the snapshot you selected for the restore operation. NO.

additional space is required, and no data is moved.

Deletion of Volumes and Snapshots

------------------------------

Because volumes and snapshots to share pages, if you delete a volume, you

automatically remove all the clichés associated with the volume.

You can manually delete snapshots (for example, if you need more of)

snapshot data). In addition, the group can delete snapshots automatically in the

following situations:

1 - failure instant free reserve. If the snapshot data consume the snapshot

. reserve, the group either deletes the oldest snapshots to free up space for new

. snapshots or sets the volume and snapshots in offline mode, according to the policy

. you have chosen for the snapshot space recovery.

2 - maximum number of snapshots, created from an agreed timetable. If you set up a

. timetable for the creation of snapshots, you can specify the maximum number of

. photos you want to keep. Once the program creates the maximum number

. clichés, the group will delete the oldest snapshot for planning

. to create a new snapshot.

Snapshot are deleted in the background queue. The group travels

the snapshot page table and decremented the reference count on every shared page.

Any page that has a zero reference count is released into free space. Pages

with a zero reference count are not released because they are shared with

the volume or other snapshots.

Because stereotypes can be automatically deleted, if you want to keep the

given to a snapshot, you can clone the snapshot.

Reserve snapshots use agreement

------------------------------------

The snapshot reserve is consumed only if you write a shared volume or snapshot

page. However, it is difficult to establish a correlation between the amount of data written in one

volume (or snapshot) with the amount of instant reserve consumed as a result.

especially if you have multiple snapshots.

Because the pages consist of several logical blocks, size e/s and distribution

volume merge affect overall performance of e/s in addition to the snapshot

reserve its use.

For example, do much written about a narrow range of logical blocks in a volume

consumes a relatively low amount of reserve of the snapshot. This is because as Scripture

the same logic block more than once, does not require not additional snapshot

reserve.

However, doing random number wrote a range of logical blocks in a

volume can consume a large amount of reserve of the snapshot, because many other

pages are affected.

In general, use instant reserve depends on the following:

1. number of entries that occur in the volume (or snapshot) and at least one

. snapshot exists. In general, more Scriptures tend to use more snapshot reserve.

. Although multiple writes to the same logical block do not require additional

. space.

2 - the range of logical blocks, on which occur the Scriptures. Written in a wide range of

. logical blocks tend to use more instant reserve written in a narrow

. rank, because more of the written word are to different pages.

3. number of snapshots of the volume and timing of the write operations. Most

. snapshots that you create more snapshot reserve is necessary, unless there is

. few entries on the volume or snapshots.

4 - age of snapshot. Snapshots older tend to consume more snapshot reserve only

. the clichés of recent because the group must retain the original data for a

. longer time.

Design Snapshot reserve

-----------------------

You cannot create snapshots until you book instant space. Snapshot reserve

is set as a percentage of the reserve volume (space) for the

volume.

When you create a volume, by default, the volume uses instant group-wide

reserve adjustment. (The reserve in the scale default setting is 100%. You

can change this default value.) You can change the reserve snapshot setting when you

create a volume or later, even if the volume is in use.

Although the snapshot reserve is not used until the volume or writing snapshot occur, it

is consumed immediately free pool space. For example, if you create a

fully allocated (not thin provisioned) 200 GB volume and specify a snapshot of 50%

pool of reserve, free space is immediately reduced to 300 GB (200 GB for the volume

reserve and 100 GB for Snap reserve), even if there are no pages in use.

Therefore, before you create a volume, you should consider how many snapshot

reserves, if any, to assign to the volume. The reserve of the snapshot set to zero (0)

If you do not want to create snapshots.

The optimal size of the snapshot reserve depends on the amount and type of

changes in the volume and the number of shots you want to keep.

By example, if you set the snapshot reserve 100%, and then create a snapshot.

You can write to each byte of the volume without missing snapshot

reserve. However, if you create another snapshot and then write in each byte of

the volume, the first snapshot is deleted in disk space available for the new snapshot. If

you set the instant reserve at 200%, there would be a sufficient reserve of snapshot

for the two snapshots.

A very conservative strategy in terms of instant reserve sizing is to put the snapshot

book value at 100 times the number of shots you want to keep. This

guarantees that keep you at least the number of snapshots, regardless of the

the number of entries on the volume. However, this strategy is generally allocates

book an excessive amount of snapshot, because that rarely crush you all the

the data in a volume during the lifetime of a snapshot.

The best way to instant size reserves is to assign an initial value to the reserve

and watch how instant you can keep over a period of time specified under a

normal workload. If you use tables to create snapshots, allow the

calendar of work for several days.

To get an initial value for a snapshot reserve volume, you must estimate

the quantity and the type of entries in volume and the number of snapshots, you want

keep. For example:

-If you wait a few Scriptures or writings which are concentrated in a narrow range

. logical blocks and you want to keep only a few shots, start with a value

. 30%.

-If you wait several entries or entries that are random in a wide range of

. logical blocks and you want to keep more than a few shots, start with a value

. 100%.

If the snapshots are deleted until you reach the desired number of snapshots,

increase the percentage of snapshot reserve. If you reach the desired number

shots without consuming much of the instant free reserve, decrease the

percentage of reserve snapshot. Continue to follow instant reserve and

adjustments as needed.

How Thin Provisioning button Snapshot Reserve

----------------------------------------------

The snapshot reserve is based on a percentage of volume reserve (allocated space

a volume). For a volume fully provisioned, the reserve volume is equal to the

stated volume size. However, a thin volume put into service, the volume of reserve

is initially very inferior to the reported size (default is subject to minimum volume

10% of the reported size) and increases as the written volume occur.

If you change a thin volume supplied in a volume fully provisioned, the

amount of reserved snapshot increases automatically, because the volume of reserve

increase in the size of the stated volume.

If you change a volume of fully provisioned to thin-provisioned, the amount of

snapshot of reserve decreases automatically, because the volume of reserve declines.

However, if the snapshot resulting reserves will be too small to store all the

existing snapshots, the group will automatically increase the instant reserve

percentage of value that preserves all existing snapshots.

Reducing the use of instant reserve

-------------------------------

Over time, you can reduce the use of instant reserve by periodically (for example,

Once a month) defragmentation of databases and file systems. Defrag operations

try to consolidate segments of files in a volume and, consequently, to reduce the scope

logical blocks addresses used in the pages of the volume.

Defragment the data read operations from one place and then write data to a new

location. So increased use of instant reserve during and immediately

after defragmentation, because existing snapshots will use more of the usual

amount of the snapshot reserve. However, snapshots created after defragmentation

operation must use less instant reserve, because the data on the volume are more contiguous.

When a volume is highly fragmented, potential reduction of the snapshot reserve

use can be dramatic, especially after removing the large before you defragment

snapshots. Defrag operations can also reduce the I/O load on the group,

because the contiguous data makes more efficient i/o operations, in order to improve the

e/s overall performance.

Latest defragmenters are good to reduce the fragmentation that is not seeking to be

too thorough. Some defragmenters also try to combine the inactive data

further restricting the likelihood of changes to shared pages. However, are not

Defragment too frequently.

Sector alignment may also affect the use of snapshot of the space, especially in

larger volumes. File systems must be correctly aligned with the sector. It comes

described in technical reports for VMware and Windows environments.

Any way to recreate a link to 50 pictures at once without matching filenames? that is by replacing the links existing and just replace with new ones?

I wonder if this can be done with a script in InDesign. I work in 2015 CC and am aware of mobility + select all the links in my control panel links, then click the 'Repeat' in order to recreate a link to each one in succession. But this method still requires me to click on the link I want 50 times, in order to link to these new images in the dialog box that appears.
That I work with, it's an InDesign file that has 50 different related images, all the same size. They are all small JPEGs arranged in a grid. I create a PDF of each sheet of 50. I need to make several sheets, and each of the 50 images is unique and should not be repeated, so filenames are all unique, so why InDesign is unable (and in this case shouldn't) link to each of them by using the option 'search for missing links in this folder. In order to make each sheet, currently I have to select each JPEG link in the links Panel and manually connect it to a different file name, is not equivalent. It takes me some time.
Is it possible to automate this process for I can select all 50 instances of links essentially and force InDesign be reprinted at 50 other, even in form and oriented files with no corresponding names, is one fell swoop?
Hope that makes sense. Until then I will be here by clicking on

This is easily achievable with data fusion. You must copy your file in an excel worksheet names and the column with the name "@ at the beginning, if InDesign will be acknowledged that they should be images." Then set up a module on the page, and you'll be ready to go.

Adobe Media Encoder CC 2015 slow rendering time

Hello!
I'm new to video editing in general, but I'm quite intimate with the PC hardware so here.
Specifications:
- The stock of 4770K i7, no thermal regulation speed
- 8 GB 1600 MHz CL9 DDR3 RAM
- GTX 780 + 170 MHz clock and 110% limit/95 degrees C temp power target
- Driver 368.39 used
- 3 x Samsung 840 EVO (no raid)
  - Windows 10 64-bit running off SSD1
    - PE/AE/SOUL installed on this drive
    - Cache / Scratch areas on this drive
    - Images under development
  - SSD 2
    - Games
  - SSD3
    - Games
I save images using shadowplay NVIDIA from a 75 Hz screen 2560 x 1080. The output file is a 1920 x 1080 60 fps 35Mbps bitrate H.264 MP4 file. (1920 x 810 with black bars).
I would add that sequences Adobe Premiere elements 14, do any editing that I have to do, and then export it to a file of bitrate MP4 1080 p H.264 12Mbps. The rendering process usually take around 10-12 minutes to 6 minutes video.
I then add this file to output in Adobe After effects CC 2015, create a composition with drag and create a button, add a few layers of text and export it via Adobe Media Encoder CC 2015 (AE supports native H.264 from what I understand) with the SAME PARAMETERS. But this time, and I estimate that I type here, render times are 40 minutes.
I ran a few tests and in the course of the first to make the CPU turns to about 80% CPU and the use of 1.8 to 2 GB, as I watch often some youtube in the meantime, so that understandeably not 100%. However, to the course to make AE/SOUL, le CPU CPU remains at about 30% CPU and 1.8 GB ram usage. With the help of the Mercury Playback Engine GPU Acceleration (CUDA) I expect to see more high on my GTX 780 loads, but he is 2-3% of load, so anything.
Since my render outputs are (to the best of my knowledge) identical between the EP and shall return AE/SOUL, it seems that the use of material by SOUL is in this case. Other posters have suggested that some effects require the previous frame to be returned to pass, but I have not used such effects, are limited to simple text.
So what's happening? I would appreciate any insight you have on this and I stand ready to provide more information that you need.
Kind regards

Corentin Robin wrote:

First of all, wow. Thank you so much for the depth and quality of your response! If everyone had that kind of mentality, forums would be a very different place...

No problem! That's why I'm here.

It is certainly useful that you said your question clearly, with a lot of info and he asked respectfully. Quantity of, "why his does not work u should help me solve this NAOW! 1. 1. ' messages with no information is astounding.

Corentin Robin wrote:

I'll try to be to condense my game data on a single disk or both and use the third exclusively for editing. Or I could buy a new one, if the budget allows.

This would be ideal. In my freelance studio, I have three separate units
1. OS/software
2. Footage
3. Cache (if there are different types of player, it should be faster than you [I know your are currently all the same, it's more for future fans forum])
It will probably not help much for the rendering speed, but it should help when you're interacting.

Corentin Robin wrote:

Before moving on to something else, I want to explain what I'm doing with text. I add text and overlay video, with sometimes a few very basic motion tracking (I can't forget this feature if I need). To the best of my knowledge, PE lets just add a black screen with text over time, like on a Blackboard for example. No text overlays/over-the-video (if it has no meaning...). So respect that, Premiere Pro have these features? If so I could make the switch.

Certainly, you should stop using the Premiere Elements and start using Premiere Pro. Not only it gives MUCH more flexibility in the work, but you can layer objects of type as much as you want on top of your film.

He was also transparent enough with AE. By example, if you have a shot that you want to add text, you could cut the part that would have text and simply right-click and choose "replace with After Effects composition. That images will be replaced with a dynamic link to a model of EI that already contains the images that you are handling. You save your AE project and results will be displayed immediately on the first! It's really convenient. If you want to keep this direct link, you can. Or if you are sure you are finished with AE work and wants to read smoothly at first, you can choose to make and replace it. It restores an intermediate file to AE and replaces the model tied first with her. VERY useful feature.

If you keep track of movement, you probably want to use AE. Although you can make an animation in Premiere Pro, AE is much more suited to do. And if you start to get really fancy, you probably want to do some rotoscoping too.

Corentin Robin wrote:

I understand that EI requires much more accurately, and the way you explained it enabled me to understand one of the big question I had with her, which was "why reading in real time is so difficult in AE? You answered that perfectly, cheers!

There is much more detail in the fact that I could get! Basically, AE must first build a cache, and then he reads. Maybe I should have said that. It is even simpler and shorter!
Corentin Robin wrote:

On the issue of compression, I realized that the work of a compressed codec is not ideal. My gross output of Shadowplay file was indeed H.264 because I believe that is the single output file, it allows. I don't think I can do without shadowplay for now because it has unique characteristics which cannot be replaced:
- For extremely low hardware with Nvidia drivers
- Ability to retroactively save a video after an interesting "keep-worthy" event, to avoid recording 24/7 in the hope of something interesting
Those who do not sound like some very useful features. Just make sure that you get quality settings in the codec to achieve a data rate as it allows.

Corentin Robin wrote:

Also, to continue on the issue of compression, I got mixed responses regarding this. Some, like you, would say that working with H.264 sacrifices quality and performance, but some say that it is not a problem since the youtube compression will be severely disfigue the file in any case.

YouTube can recompress, Yes. But if so, it adds ANOTHER layer of compression. That would be an argument even more important to preserve the quality of your side as much as possible.

Corentin Robin wrote:

I think my question would be: I would win a much higher quality using Fraps/Dxtory where I can control the settings of the raw images (keeping in mind I lose the comfort of ShadowPlay) even though the compression of Youtube should (I think?) disfigure this film?

I think that the benefits of ShadowPlay outweigh the concerns that I had about compression in only one step. I still say don't do any other steps in making H.264s again and again that you transmit your project between applications. If you need to make something (you won't have to if you start to use together the Premiere Pro and AE), renders an intermediate codec until you create your deliverable.
Corentin Robin wrote:

So, keeping in mind of all of your suggestions and the constraints I have / has chosen to conform to, I should:
- Have the work files on a separate disk, with areas scratch on this drive or free
- Replace PE PP to eliminate the need for the AE and have only a single record
- Since a single rendition is necessary, it is therefore more a real need for an intermediate codec low compression/lossless
Yes. Although, you can still use AE, you have eliminated the need to make the intermediate files if you use Premiere Pro and AE set.

In addition the Dynamic Link workflow I mentioned, you can also (once you have finished your editing in Premiere Pro), your Premiere Pro project import into AE. Use import > import Premiere Pro control project. She puts your complete sequence in AE with each cut on its own layer. You really need to do if you started to do really complex with your AE work if.

Achievements to date balance

Similar Questions

Maybe you are looking for