eMachines EL1850 new RAM not working not

Similar Questions

• New RAM not working not not on iMac 2010

  Hello

  I have a 21.5 ' mid year 2010 i3 iMac, and, after all this time, it was time to upgrade the RAM.

  I bought 2 x 4 GB Patriot SODIMM PC3 - 10600 1333 MHz 204-pin, by following the instructions in the Web page of Apple memory upgrade (install memory in an iMac - Apple Support).: 4 GB RAM SO-DIMM memory DDR3 SDRAM 1333 MHz. I installed it according to job with factory 2x2gb RAM Samsung sticks. After a reboot, everything worked beautifully for about 6 minutes. The identified computer sticks again and showed me a full 12 GB available. Which was great, since Yosemite + a few browser windows and Spotify only lasts up to 3GB. I have enough to spare. However, it restarted and again and again and again.

  I decided to test only the new RAM and started with the combination of Patriot 8 GB. It froze on reboot and fully started once, but it restarted less than 2 minutes later.

  Result: now I'm back to the original combination of 2x2gb. Always deal with the lack of memory and without understanding what's wrong with the new RAM I bought at Fry's. What about compatibility? Is there an another specification? Of course, I know, there may be a malfunction of hardware, but I would like to address this issue before making another run to the store and risking another model or brand.

  For reference: I've tried it before, but because of the lack of information from the seller, I was conquered by a stick of RAM 1x8GB, which is not supported by my model. So I replaced it with the 2 in question.

  Thanks for any help.

  It is generally recommended to stick with quality RAM to buy from a seller that tests and ensures their RAM to work with Macs - the two most recommended are OWC (macsales.com) and Crucial. They both offer helps you determine which RAM you need and offer the lifetime warranty.

  http://eShop.MacSales.com/shop/memory/iMac/2010/DDR3_21.5_27

  That should be your - sure.

  I'll be back on the RAM for a refund.

• Why does new ram not show upward on sbs 2008?

  I just installed extra ram on our server memory blade HP Proliant w / SBS2008 and the new ram is not save. Only the original 4 GB (2 x 2 GB) is displayed.
  I bought ram based on the computer and matched with the crucial analysis tool. Am I missing something?

  It appears in the BIOS?

  When you install, you did it that RAM modules have been well installed in banks of memory, which means that they clicked in?

• All-in-one HP 3420 new RAM not recognize computer

  Have some computers All - in - One HP 3420 I'm trying to upgrade the memory in.

  There is that memory, two locations so choose which slot for memory is a no-brainer.
  
  Has started with a 2 GB chip slot added another chip of 2GB to
  location B - no joy, computer
  recognized only the slot a. 2 GB
  
  Has taken a 2 GB
  chip on a second HP 3420 & put it in the slot B
  the first computer (just in case I have used the bad memory).
  Still no joy.
  
  BIOS is only say 1 Channel memory & only
  Recognizing that only channel & 2GB memory
  Someone at - it a setting I can verify
  or jumpers on the leading edge that must be fixed in order to recognize the double
  Configuration of channels?
  
  I would be happy if I can still get the systΦme can recognize the
  4 GB, I have in it, either in single or double channel
  mode.

  In case someone else has a similar problem:

  Computer to start

  F10 BIOS & GB of information system to check a single recognized memory

  Exit without saving changes

  When the computer turns off before the reboot, pull the computer branch

  After 30 seconds, plug the computer in, turning on and f10 in the BIOS:

  computer should now recognise the new RAM

• New RAM should work, but doesn't work!

  Hey

  I have / had a SR5019uk, I have somewhat changed i.e new cases, big New/more drive, more RAM, better graphics (Nvidia GeForce 8400GS), better CPU(Athlon 64 X2 5000+).

  Now, I put the hand on some new ram that will improve that PC without end but it doesn't seem to work when I put it in with 2 sticks of the current RAM

  RAM in = 4 x 512 MB PC2 4200 DDR2 533 Mhz 4-4-4-12

  Go to:

  New RAM = 2 x 1 Gb PC2 5300 DDR2 667 Mhz 4-4-4-12

  I put it as follows: 1 Gb / 512Mb / 1 Gb / 512Mb<---- 4="" slots="" as="" you="" can="">
  Allows dual channel

  Everything I read says that it will work together; everything in the range of 533 Mhz, but I can live with that for the extra 1 GB of RAM
  Read also the Mobo card and he said he can support the two types I listed

  Mobo = Asus M2N68 - LA
  HP/Compaq name = father-GL8E

  But... Nothing.

  Beep beep Beeeeeeeeeeeeep! ...             <----  is="" all="" i="" get=""> To the Mobo

  Help!

  Looks like a serious machine.  This information can be useful in determining the cause or the source on the beep codes and what they're trying to diagnose.  Let me know what happens.  This, by the way, is my own opinion and not that of HP.

  http://support.HP.com/us-en/document/bph07107

• ProBook 4740 s: new RAM not recognized...?

  I have an old but functional 4740 s Probook, always running on 4 GB of memory. Is no longer worth (especially running programs using a lot of memory as GIMP), and with the upgrade to Win10, I decided it's definitely time to upgrade memory. The max memory for this model is 8 GB.

  According to data IO could find online, I bought Kingston KTH - module X3CS / 4G memory, specified for HP/Compaq. I inserted the memory as far as I can tell, but it does not appear as being recognized. I run the Windows memory checker and found no problem.

  Can anyone suggest what I might hurt?

  Memory module specifications are given as follows:

  Kingston 4 GB DDR3 1600 MHz specific system brand HP SODIMM

  On the Kingston site the Probook s 4740 is not specifically reported as compatible, but they list any of this model. Elsewhere online (IE on thousands of websites of seller) it appears as compatible memory.

  Thanks for any help!

  The most likely cause is that the two modules are not exactly identical.

  It is an essential element of the recommendation that I propose to members who want to upgrade.

  If you want it to run as expected once the new modules are connected, do not mix the types of module or manufacturers.

  Purchase of of another memory identical bar and you shouldn't have problems to start at 8 GB memory acknowledged.

• Aurora R4 new RAM not posting

  I have a R4 Aurora with 8 GB of DDR3 RAM at 2133 mhz. I bought two sticks of G. SKILL Ares 8 GB 2133 mhz RAM install, but I get a beep code from RAM to address missing whenever I start the computer. Anyone know what is happening? And you need more information on my system?

  It's the 8GB RAM validated for this model:

  66GKY 8GB 1600 MHz PC3-12800, Non - ECC, DDR3, 512 X 64, 2RX8

  http://bit.LY/2c8dFQK

  You must return these Ares G. SKILL 8 GB memory sticks to the seller. Buy our validated memory 8 GB sticks.

• Compaq Presario C303NR is not completely put on after the new RAM upgrade

  Hello Paul,

  It's Tammy. I finally took the time this morning to upgrade the ram in my laptop, model C303nr. And I am desperate need help because something has gone terribly wrong.

  The laptop starts up to my office, I get nothing but then move lines, a little like snow tv, but more structured. I took the new memory on a couple of times and tried to re-sitting, but I get the same results. Furthermore, when I tried to put the old memory, exactly the same thing happens. Have I completely broke my laptop?

  Can you or anyone out there please help me. This is my first attempt to do something like that and I feel absolutely sick results.

  Clinging to hope for a fix.

  Tammy

  Hi Paul,.

  I must say once again, you have a way very appreciated to bring the balance to my pc problems.

  During my first attempt to install new ram not worked, I thought that I had inadvertently he damaged everything trying to embed. (It is certainly not a room of heap for the maneuver of the ram, clips and fingers! Besides, while trying to stay grounded.) Then, when I couldn't get the old RAM to work either, I thought I had I damaged the laptop everything somehow. It was a horrible feeling.

  Even after that I finally got the new ram to work, I felt bad to not get it in correctly the first time. I felt as if I should have been able to prevent any inconvenience on my part. However, when I read that you have recently encountered a problem with ram of your son, your post made me appreciate that sometimes things happen if its your first time or umpteenth time to do.

  Thank you for giving me the space to hold myself.

  In addition, I can imagine how the ram of your son was stuck. If that does not damage its ram, then maybe ram is a bit more durable than the shell egg-nitroglycerin, I felt... like manipulating its fragility should not always be a concern.

  I wish you the best,

  Tammy

• Satellite Pro 6000 - new RAM does not work

  Hi all

  New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

  I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

  I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
  Any help would be thank Lindsey

  I think that the new RAM is not compatible with the motherboard or laptop.

  The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

  By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

  The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

• Satellite L30 10Y does not start with the new RAM modules

  Hello
  regged just with this forum I have a problem to upgrade memory.

  I read through a few problems of memory here and all users that it is a problem of memory comaptible. I got Hynix 512 MB RAM in my laptop and I bought 2 x 1 GB memory Hynix these two are match sticks to the installed memory, but when I installed my laptop wouldn't boot at all. It would only boot if I had a stick in both.

  I tried to switch ports top and btm and even when a stick was installed it says in XP, Vista and Windows 7 (yes I tried all systems) 896 MB of available space. I even tried to use my other Hynix stick, but he won't start and showed more stick of 1 GB (896 MB usable in Windows 7). After reading all the threads I wonder if it is a hardware failure or is there a fix in the world of Toshiba or perhaps in the world of Toshiba, the L series is almost obsolete and not worth to help people who unwittingly bought their goods.

  I apologize for being slightly down on Toshiba but a laptop that shows what he can work and is not a company should hold his hand up and say that Yes, there is a fault and help deal with the problem.

  You see 896 MB, because the rest is reserved for VRAM for graphics card.

  Sometimes RAM may simply be incompatible, because of incompatibilities of calendar or RAM chip/controller design differences.

  What speed and timings is your original RAM?
  PCxxxx / DDRxxx =
  Schedules CASES/RAS =.

  What speed and timings is your new RAM?
  PCxxxx / DDRxxx =
  Schedules CASES/RAS =.

  You can display this information using a utility called CPU - Z
  http://www.CPUID.com/cpuz.php

• New RAM for Precision Workstation 670 does not

  I just bought 4 of them: http://www.ec.kingston.com/ecom/configurator_new/PartsInfo.asp?ktcpartno=KVR667D2D8P5/2G

  When I install only the new RAM in the computer, it emits a sound when I insert the power supply cord. If I use 2 original 512 MB sticks into sticks new housing 1 and 2 and 2 in slots 3 and 4, the BIOS indicates only 1 GB is installed and the new sticks are not ECC.

  As far as I know, the new RAM I bought has the same specifications as http://shop.crucial.com/1/4/43005-dell-precision-workstation-670-workstation-memory-module.html. I buy the wrong type of RAM? Can I do the computer works with the new RAM (maybe not using ECC)?

  
  

• Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  While you do not, you use the iPad Pro, correct?

• Just started to get a message saying that my product no longer works because I installed it on two other computers, my other computers do not work, then the facility in my new computer it worked for a little while, then this message kept popping up, what

  Just started to get a message saying that my product doesn't work more because I installed it on two other computers, my other computers do not work, the installation in my new computer, it worked for a little while, then this message kept popping up, what can I do to make it work on my new computer?

  For more information on the activation or deactivation of Adobe products on your computer, please follow the instructions contained in this document:

  Activate or deactivate an Adobe product

  You can also make reference to: connect and disconnect from the desktop Adobe Creative Cloud application

  I hope this helps.

  Concerning

  Megha Rawat

• BBC News will not play

  In the BBC news video clips continue to flock to the top with "content doesn't seem to work." Please try again later"when I try to view in Pale Moon (Firefox under another name), but they play no problem in SeaMonkey. A parameter is not reason for Pale Moon, but I don't know which. I'm not often of clips, but every now and then there's interest.

  I have installed add-ons or Plug-Ins in addition to those who are ready installed outside, perhaps, for Fox - It, my .pdf reader.

  Any suggestions as to what is the problem and how to solve the issue please?

  News-cuts to work for me

  • for example the current clip on this page http://www.bbc.co.uk/news/world-europe-27745278

  I tried this on Firefox Fx29 & Fx31a; and on Palemoon 24.5

  Use topic: support (key in the address bar) to look at your settings. And remember to use Firefox reset

  • Firefox - modules to reset and refresh settings

  Note that this is not a support site for Pale Moon that their support is

  • http://Forum.Palemoon.org/viewforum.php?f=3

  I will be this tag as off-topic as it relates to Palemoon, but will not close the issue until questions about BBC video clips not playing not seems a valid topic, my original Mozilla install came with BBC rss included.

• Module of RAM not recognized on my Satellite Pro A60

  Hello
  I have a Satellite Pro A60 and recently bought a RAM of 512 MB memory upgrade.
  I have fitted on the correct port, however, there does not appear to be be achnoledged as being there.
  Can someone help me?

  [Edited by: admin August 31 05 19:02]

  Hi Robert,.

  I guess your A60 has two RAM ports, then I suggest that Exchange you the two RAM modules autour to check if the port rather than the modules itself that is the source of the problem.

  I hope that you took of anti-static precautions before manipulating the new RAM module. They are easily damaged by a discharge of static electricity.

  HTH