Acquisition of signals according to schedule low external digital input state
Hello
I use DSA devices namely PCI-4472 and PCI-4474 for data acquisition. Our application requires that these councils should acquire data as long as input digital external is in DOWN state that is to say that the device should start acquiring on falling edge and stop on rising acquisition. Unfortunately, I could not find a method to do, which is independent of the number of samples sent to the called function. If I set up the device in this configuration, it starts after the first falling edge and stops on rising edge. But if no. samples to acquire (N = value passed to the called API function) is less then the total no.. samples which are to be acquired (between start and stop say N + X m), the function only returns me the N number of samples during a fall X samples.
Similarly if no. samples between edges of slopes and trigger signal (Y for example) are less value (N) was passed to the API function called, the function return always N = Y + Z, even if we do not require z. samples.
I tried to check this thing in MAX. Can someone help me get around this problem?
Concerning
Mnuet
Sorry about that. I realized while I was writing my response to your original question, you had already posted back. Preston is correct, I was trying to find a way that you could do a digital reading to control the level of the PFI 0 line, but the DSA maps do not have circuits to allow you to make digital reading. The only way you could check the line would be to use a digital I/o card.
Kind regards
Frédéric
Tags: NI Products
Similar Questions
-
Unknown device named "PCI data acquisition" and signal processing controller in Device Manager
Greetings,
Yesterday, my brother, who was running Windows 8.1 Overview on his Asus S400CA Ultrabook fell on a big problem of the NTFS partition corruption that made it impossible to recover through the Refresh Utility Windows 8.1. Given the situation, my brother decided it was better to go back to Windows 8, I had to install Windows 8 on their PCs by using an external DVD drive with a Windows 8 x 64 installer I already buy plenty of detail. The computer never asked me for a product key that I have read is normal in Windows 8 PC now having these embedded in the motherboard. So far an installation smoothly, but he's going to be delicate in the part of pilot facilities. Before you remove the computer I went to the Asus website and did my best to find the specific drivers for my brother's computer and downloaded the key drivers, chipset, audio, intel graphics card, bluetooth, trackpad Wireless LAN, LAN and Asus and installed. I used Device Manager to check that the drivers have been installed and which did not exist. I was able to get most of the drivers installed properly, however, said the Device Manager miss me the pilot of "Data Acquisition and Signal Processing controller PCI. Unfortunately I go to Asus website to see that if I can find the driver however, I can't do this right now.Check the attached screenshots for visibility...I also tried to use Windows Update to see if he could find the correct driver and unfortunately it's a dead-end. Because of that I write in this forum to see if someone can point me in the right direction when it comes to this missing driver (and others) indicated in the Device Manager.One last thing that I would ask is if I can use a utility like DriverMax to find missing drivers or should I go and install it manually?Thank you very much in advance for any help on this matter.Original title: cannot find drivers for Asus S400CA Ultrabook PCIHi Mike,.
Please keep us updated on the status of the issue. Please do not hesitate to answer, in case you need help with Windows in the future.
Good,
ASUS technical support according to my brother was a bit of a dead end, so I went to another Google search and found the culprit. I was missing the following drivers of ASUS:- Intel® dynamic and thermal platform frame driver
- ASUS Wireless remote control (a driver for you to enjoy the airplane mode (Wireless) On / Off)
The first pilot took care of the Acquisition of ICP data and Signal Processing controller and all but one of the unknown devices. Finally, the other took care of the last unknown device in Device Manager.I never thought that ASUS would use this a strange name for their driver because these names are extremely misleading.Other than that, I can finally say with certainty that the computer of my brother is back in business, and I can call this comprehensive process of restoration of Windows 8.Thanks for any assistance to Zaki J, I appreciate much all advice through this process! -
Missing PCI Data Acquisition and Signal Processing controller drivers
Hello!
I have a problem with my Inspiron 11 3148
Service etiquette: CSFND32A few weeks ago, I did a clean reinstall of windows 8.1 using a .iso downloaded from microsoft technical support and put in level to windows 10 in a short time after.
I don't have my thumb drive installation, where the microsoft .iso image file.
Since then do a clean install, I had a few questions I'm going to break my best.
1. lack of drivers for unknown devices & a PCI data acquisition and signal processing controller.
I had some problems with wifi, so I looked in the Device Manager to check if my card needed a driver update and discovered several other device driver errors, which cannot be resolved by using windows update. The card wifi itself says it is updated.
I tried to use the dell service detect downloaded applet on the page of the Dell driver IE, but it does not seem to function.
If someone can identify what (s) I might need for these unknowns that would be fantastic.
2. Wifi issues, perhaps in connection with the missing drivers above.
-Sometimes does not detect networks.
-Sometimes cannot connect to the internet when it is on my home network.
-Is not able to connect to weak points where before he could.
* Reset the network adapter in the network settings fixes detection and connectivity issues, but does not improve the detection of signals in weak points *.
3. high (100-96%) HARD drive load for a few minutes after start high and very occasional errors "in areas not paginated page failure."
-J' lived load disc high enough the last time I got the upgrade of 10 windows the first time, requiring often 5-10 minutes to settle at startup
-Second time around, I always get high disk load, but it is not too long. The upgrade fee is very 'light', I have very few programs installed and even less to launch at startup.
-Defects of Page seemed generally coincide with me shortly after you start using Google Chrome. I now use firefox instead and have known only one mistake so far since the permutation
* I used the windows disk check and ran chkdsk /r for longer check disk to reboot, but both are no problem with the drive *.
Ok... So usually after I finished writing this post, I came across a solution for the number one problem while browsing the microsoft answers forums.
I downloaded and installed a driver for the Intel platform dynamic and thermal framework.
-This solved my problems of missing driver.
-J' rebooted several times and I am not also problems of wifi the day other than the problem of low task, but what I'll take it! -
PCI Data Acquisition and Signal Processing controller driver
I installed win 8.1x64 on my HP Probook 450 G2, but miss me the driver of PCI Data Acquisition and Signal Processing controller.
Can you please help?
Thank you
Leontina
Hello:
Please see if installing the Intel Chipset driver installs this device.
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816
-
15 - r235ne: SM bus controller / IBD DATA Acquisition and Signal Processing controller
Hello team
I am facing problem in finding the right driver for material below.
1 SM bus controller
2 IBD DATA acquisition and Signal Processing controller
kindly help
concerning
NASIR
Hi, Nguyen:
Download and install the Intel chipset installation utility and restart the PC.
The 2nd driver down on the left is the automatic installation file.
-
HP laptop - 15-ac022ne: pci of data acquisition and signal processing controller
I have this laptop HP - 15-ac022ne and I got windows 8, evrything has not been totally perfect until I upgraded to windows 10, wireless function no longer works, tried to install the driver and update, it was succsessfully installed in the machine to say, but still not working and PCI data acquisition and signal processing controller driver is missing tried to download the chip set on the driver support page, does not, tried to update the driver through the Device Manager and the message can not find a driver for the device of said...
Please I need help...
Hello:
You need this driver for pci data acquisition and signal processing controller.
-
PCI data acquisition and Signal controller and SM Bus controller drivers are not installed
My laptop is Toshiba satellite L305 with Intel Pentium (R) Dual CPU T3200 2 GHz / 2 GHz.
Rescently that he has been upgraded to Windows Vista Ultimate Edition, 32-bit operating system. Since then, my USB device wireless to connect to the internet is not worked. The Device Manager displays a yellow! Select this option for PCI Data Acquisition and Signal controller and the Bus controller. The details for the two area said that pilots are not kept.
How can I get these drivers. I'll appreciate your help, thank you.
Carlos
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
Toshiba support at the above link
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download
Toshiba Driver download at the link above
http://laptopforums.Toshiba.com/
Toshiba laptop Forums at the link above
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Access the site of the manufacturer of your laptop to the link above > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.
See you soon.
Mick Murphy - Microsoft partner
-
I just installed Win7 Pro x 86 on my Z600 workstation. It was an upgrade to Windows XP Pro. I'm missing the driver for PCI Data Acquisition and processing of the Signal and Hardlock USB 1.02 controller in Device Manager. Can someone help me find these drivers. I looked on the page of Support/Drivers for this model, but could not find anything.
Hello
You can get assistance on the HP Enterprise Business Forum since you have a professional worktsation.
-
Problem with the acquisition of signals with DAQ
Hello
I am trying to acquire a signal voltage using NOR-USB DAQ 6008 without using express assistant DAQ vi but the vi gives an error as shown in the attached picture.
I just want to acquire the voltage signal.
Can someone help me solve the error so that I can get to acquire tension using data acquisition.
Thank you.
Hello GoviRe,
Please turn off the running highlight. ("the Yellow lamp" must be turned to off / / 'white')
Your samples crushed, because you are forcing him to crushed to help highlight the execution.
-
acquisition of signals from multiple cards simultaneously
Hello
I am trying to acquire the signal of my cards OR PXI simultaneously but having some difficulties to implement which.
Here is my configuration:
Installation of equipment:
(1) chassis NI SMU-1071
(2) map of NI PXI - 4461-2 I / P and O/P 2
(3) map of NI PXI - 4492-8 I / P
Here is the acquisition code I wrote:
The problem is that when I use the I / P channels on the same card (4461 or 4492) then, the code works well, but if I use the channels of entry on two simultaneous cards then I get an error message:
"
200106 error occurred at DAQmx Read (analog 1 Wfm NChan NSamp d) .vi:
Possible reasons:
Property must have the same value for all channels on the device.
Property: RefClk.Src
"
I tried to set the clock reference to "The clock on board", but I still get the same error.
What should I do to reslove this problem?
Thank you
Ritesh
Hi Ritesh
Have you tried to import a common clocks ref for 2 boards? This is not supported by all devices, but for those that you combine, this should be confirmed as you can see on page 44 of this document.
WenR
-
Hello
I use Windows 7 Ultimate Hp Notebook model ac118tu. In Device Manager, it shows the yellow mark to the Acquisition of ICP data and Signal Processing controller (the name that appears twice). What is the use of this controller?
Yellow mark means that I need to install the driver for this. Please share the link to the installation of this driver.
Secondly, I want the drivers for the webcam as well. Please share.
Hello:
You need the driver for this device...
This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
protection to work properly. This package is provided for the laptop models running a supported operating system.File name: sp71638.exe
For the webcam you just install this software.
This package contains the CyberLink YouCam software for laptops models and operating systems. CyberLink YouCam is an application webcam that allows users to capture images and video from a web camera and apply visual effects for video and captured images.
File name: sp71830.exe
-
Laptop HP, sn 5CG5231VT5: PCI Data Acquisition and Signal Processing controller driver
I installed win 10 x 64 on my HP laptop, but miss me the:
-INC of Data Acquisition and processing of Signal Controller driver.
-Intel Atom (TM) /Celeron (R) /Pentium (R) processor Intel DPTF thermal device framework - 3400
-Unknown device
Can you please help?
FOR INFO:
I already install the latest Chipset Intel 10.0.27.0, and
Download all the drivers on the HP support assistant page.
Hello:
See if this driver works...
This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.
File name: sp71262.exe
-
HOW I can install pci data acquisition & processing controller driver hp compaq presaro cq60 for vista basic reception of the signal. cause my display setting does not work pls help me
Hi Sahnuaijaz,
1. what happens with your display settings?
You need to download the drivers from the HP website. You can check this link to get in touch with HP that follows:
http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en
Hope this information is useful.
-
Need help to write a program for the acquisition of signals.
Hello
I need to write a program that will do the following:
1 acquire two signals simulated,
2. make 10 averages the signal,
3. filter the signal,
4. display the signal in its raw form and the power spectrum (fft),
5. save the data using writing to the file vi
I tried it for awhile, but there's always something does not... None of the experts LabVIEW here can help me?
Thank you 1 million.
-Deet
No one here is going to do your homework for you. Please join what you have written so far and explain the specific problem that you are experiencing.
-
How to get to multiple data acquisition voltage signals
Hi guys,.
I have to run an event for children to play with different types of energy production, so we have a wind turbine, solar panel and a generator. I have all of them connected to the ports of entry of the C USB DAQ series, I can't seem to find a way to make data acquisition out all three voltages simultaneously, the DAQ assistant in labview won't do it, AFAIK. I need all the outputs of all so that the children can see the reknewables plus and then complete the lack to win with the "power station" generator, so I need them all running at the same time. I had a quick glance at similar problems, but I don't see how they are relatable to my case.
I have attached the vi below, thanks for your help.
Amy
DAQ Assistant allows multiple entries of tension. When the analog channel selection hold down the SHIFT key and then select as many channels available, you want.
Maybe you are looking for
-
How to send pictures in an email that I downloaded on onedrive so that someone else can see
I downloaded all my photos (for onedrive), what do I do now?-J' wrote my email and saved as a draft.
-
Blocked by some web sites - why?
I noticed a strange behavior in recent days.This morning, I am trying to go to stonehouseinn.com. When I enter it, it starts to load the home page, then turn away to a blocked page: http://stonehouseinn.com/blocks/page_list/view.CSS?v=744eb82069f594b
-
How to have the sidebar with thumbnails by default in the application preview? I'm on OSX El Capitan 10.11.3 on iMac, and whenever I open a PDF file, there is no sidebar. I have to every time click on the Sidebar icon, then select the thumbnails. I w
-
Hello I have a project that controls a piezo stage. This is done via a DLL from the manufacturer, and I used the wizard 'Import-> Shared Library' to make a library lvlib in the user.lib folder. The lvlib folder contains a bunch of screws and two DLLs
-
HP ENVY 4500 Series (network): scan negatives
I have the HP ENVY Series 4500 (network) printer/scanner/fax machine and would like to know if it is possible to scan 35 mm negatives and save them as a digital file on my PC?