ACR vs Capture 2? : what is the best?

Similar Questions

• What is the best software for imac photo management

  What is the best software for imac photo management

  This will depend on your needs.

  Looking for a database of professional for a huge collection of photos or photo is a simple tool to keep photos organized suffice?

  Software of Apple's professional photo 'Openness' is no longer sold. Professional software, you will need to look for software from third-party manufacturers - Lightroom, Capture One, to name a few.

  The News Photos of the Apple is still very basic and more suitable for an amateur user casual; you don't have much control over the design of the database of Photos.

• What are the best settings of camera for the winter?

  What are the best settings of the camera when you are skiing in the mountains, and capturing the snow mountains?

  @cakiMK

  Manual and adjust the white balance.

  There are a few online guides

• What is the best place in windows 7 to discover this netwerk is slow

  Hello

  What is the best place to find out if the netwerk is slow, which is sysmonitor?

  I find myself little complicated netwerk monitor utility.

  Thank you

  Johan

  You are welcome.

  Network Monitor 3.4 is a Protocol Analyzer. It allows you to capture network traffic and view and analyze.

  How to use Network Monitor to capture network traffic

  http://support.Microsoft.com/kb/812953/en-us

  http://TechNet.Microsoft.com/en-us/library/cc938655.aspx

  Working with Network Monitor part 1

  http://www.windowsnetworking.com/articles-tutorials/trouble/working-with-network-monitor-part1.html

  Resource monitor is used to display information about the use of hardware (CPU, memory, disk and network) and software (handles files and modules) resources in real time.

  Resource monitor strongly relies on event for Windows (ETW) tracking facilities, the installation of the counter program (event tracking session) used by the resource monitor can be used for the registration of institutions

  Using the resource monitor to troubleshoot Windows Performance part 1

  http://blogs.technet.com/b/askperf/archive/2012/02/01/using-resource-monitor-to-troubleshoot-Windows-performance-issues-part-1.aspx

  Part 2

  http://blogs.technet.com/b/askperf/archive/2012/02/08/using-resource-monitor-to-troubleshoot-Windows-performance-issues-part-2.aspx

• What is the best way for foglight consume a webservice

  I hope that this is has not been replied that a bazillion times and if it is please send me the link I'm open to that.  What is the best way for foglight consume a Web service and respond with an alarm if the response from the Web service is not what is expexted.

  for example, calls Foglight webservice to acme.com/areuup and he responds with correct status in json format process.  If it does agree return, then foglight must send alerts to correct individuals.

  Thank you

  Kaleb

  in the end, we have used a perl script to capture the webservice and treat it and tables configuration.  Here is what has been written and created an agent custom.

  I apologize to all those who find the bulky comments, but it's my edition of journal of the script. I removed the comments once the script has been published and used.

  ===

  #! / usr/bin/perl

  #############################################################

  # Author: Kaleb J. Albee

  # Depandancies: SOA webservice

  # Engineers: Marc and Manu

  # Date: 28/02/2013 perl: (v5.14.2) built for x86_64-linux-gnu-thread-multi

  # Operating system: Linux 3.2.0 - 29-generic eam-ops-test #46 - Ubuntu SMP Wed Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  #############################################################

  use strict;

  use warnings;

  use Try::Tiny;

  use SOAP::Lite;

  use SOAP::WSDL;

  Use Time::Local;

  My = @soaenvs ('BSE - dev', 'BSE test', 'BSE-scene', 'BSE');

  # parameters: $_ [0] receives a call of SOAP client object.

  #

  void toStr {return $_ [0] == 1?} 'up': 'down' ;}

  void getBusResults {}

  # $_ [0] will be the $client spent

  # create a different buses SOAP connection.

  my $result = $_ [0]-> (getMessagingEngineHealth)

  # arg0 is used to set the setting for what is expected on the soa web service.

  SOAP::Data-> name (arg0 => $_ [1]));

  # $_ [1] will be the bus happened in

  return (Lk ($result) "started" eq? 1: 0);

  #return $result;

  }

  # Start sampling.

  My $curTimeStamp = "";

  my $count = 0;

  Print "LdsEsbBusHealth5\nSTART_SAMPLE_PERIOD\n TABLE";

  foreach my {$soae (@soaenvs)

  my $client is SOAP::Lite-> service ("put the url of the webservice here.");.

  $count ++;

  # create an object to inspect objects. My $insp = Data new::Inspect->; Download the time stamp for this.

  my ($sec, $min, $hr, $day, $mon, $year) = localtime;

  # format the year correctly for useage.

  My $curyear = 1900 + $year;

  # the hand to the fglam agent fields at the tables.

  My $soacei = getBusResults ($client, "messaging.000 - CEI.esb.BUS");

  My $soaapp = getBusResults ($client, "messaging.000 - SCA.APPLICATION.esb.Bus");

  My $soasys = getBusResults ($client, "messaging.000 - SCA.SYSTEM.esb.Bus");

  $curTimeStamp = ' $curyear$ MON$ day$ hr$ min$ s ";

  Print "SoaEnv.String.id=$soae\n";

  Print "CeiBusNum = $soacei\n";

  Print "AppBusNum = $soaapp\n";

  Print "SysBusNum = $soasys\n";

  Print "CeiBusStr.StringObservation.obs =". toStr ($soacei). "\n";

  Print "AppBusStr.StringObservation.obs =". toStr ($soaapp). "\n";

  Print "SysBusStr.StringObservation.obs =". toStr ($soasys). "\n";

  Print "Daterun.StringObservation.obs=$curTimeStamp\n";

  If ($count<=>

  Print ("NEXT_SAMPLE\n");

  }

  } {$soae foreach (@soaenvs) #.

  Print "END_TABLE\n";

  Exit 0;

  ===

  I hope this helps someone out there!

  Bravo!

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• What is the best way to collect newspapers to send to Vmware

  I have ESXi 4.1

  I recently sent newspapers in support, on request, after we have a host to freeze on us.

  They responded back that newspapers have not capture anything because a restart updated newspapers and only a syslog would be able to provide clues before a crash.

  Is it true because it's strange that newspapers would be destroyed after a reboot.

  The syslog offers a challenge because we cannot control the level of gravity on the host, so we threw ourselves with a lot of useless information.

  We need the newspapers to find out why our guests are crashing and requiring us to restart.  On one occasion, we do not have vmotion virtual machines to another host.

  Once we did it, but the host did not until we rebooted it.

  What is the best way to collect newspapers send it to vmware for analysis?

  Thank you

  Falcone

  On ESXi, if you create a partition important stripe, yes the newspapers would disappear on reboot.

  Syslog is the right way to enter it.

• What is the best program or how to check an image on the monitor screen (contrast/color, etc.)

  Hello

  In ACR I adjust the image so that it looks OK to me.

  But there are a few differences in the cab and PS visualization of the image (color, contrast, etc.).

  In programs like foto-viewer of windows , there is another difference (compared to ACR and PS) > > images have more contrast and darker than the visualization in PS

  Another program Irfanview shows the image with less color (saturisation).

  I did a test print (in a center of the photo), this picture translates into something between Irfanview and Psalm

  Question:

  What is the best program or way to adjust the color / contrast, etc to make me a photo-image (on paper) which is the same as what I see on the screen of the monitor mij.

  Probably still a problem with color management.

  PS is color managed, will honor an embedded profile (or tag) in an image and to 'bend' the colors according to the color space of image and its supported monitor.  Check the color settings to see if / what that PS takes in what concerns monitor color space and image profiles.  Other programs are not color management and send the RGB values directly to the monitor.

  You can't see a difference if the image has an sRGB profile (or none), but that say a picture comes up with its Adobe 1998 color space.  Photoshop will honor but other programs will not, then you will see a net difference of saturation.  Adobe 1998 being a larger color space, it uses small differences between R, G, B to a saturation of the color indicated that would exist in sRGB, so seen in a managed application without colors, the image will appear less saturated than in PS.  And other "Pitfalls" that can cause the effect reverses.

  You must have a minimum knowledge of color management to be able to reconcile various appearance of the image between the various applications.

  Richard Southworth

• What is the best way to copy a large poster and print it?

  I am doing a project of great art (about 5 feet by 5 ft), where I'm going to learn things by hand and would like to make a copy of this project by analysing the it in the computer, or to take pictures high resolution project and their compilation together in the computer and then print the image at this size, or larger. So, I'll have the original, 5x5ft and one printed copy.

  What is the best way to achieve this?

  I heard that vector images are ideal for this, so is recommended for Illustrator this?

  I know it is a vector graphics program, but is it possible that I can take a bitmap of a scan or photo and somehow become a vector? If this is not possible, what are the recommendations would you?

  I have Illustrator CS2.

  I do not believe that the scanners large format are flat, if I'm wrong. In my view, they have a mobile head that scans the original bottle then made up the data with the software.

  It is not cheap, if the original can be easily damage they'll probably damage it unless you make sure that beforehand what they know about it
  and that they accept that they can scan without damaging it.

  Photography is a good solution if you know how the art of light and you use a long distance goal.

  The reason is shooting with a normal or wide-angle will give an effect of stretching the edges especially bandwidth due to the proximity of the camera to subject distance. The lens and the longer distance will accomplish the same capture without you stretching effect.

  Now, if you really have a service experience work fine arts or large commercial then scanning might be the way of.

  In both cases, I don't think you want to vectorize the art.

• What is the best way to buy an iPhone Unlocked 7?

  Hi all

  I am currently using T-Mobile and want to get the new iPhone 7. Since there is no option for a sim-free iPhone, what is the best way to buy the new iPhone? Should I get the T-Mobile one full fare? I know that he will be released version but it will come with a T-Mobile sim so what will do with the sim card? Put it away or give it to T-Mobile? Or should I wait for the version without card sim to appear, which I don't think that will come out until November, and I don't want to wait that long.

  Thank you in advance.

  If you do not want to wait to pay full price for the model from T-Mobile.  You can do whatever you want with the SIM card.

• What is the best OS for a late 2008?

  What is the best OS for a late 2008?

  El Capitan.  He will run the latest apps and have the latest safety features.

  Do not install the maximum RAM that your model will accept (best sources RAM compatible Macs are OWC and Crucial).  If the bank account is fat, install an SSD (Crucial and OWC SSD are recommended).

  Ciao.

• What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  The recommended method for re-index/reconstruction is to open Spotlight preferences panel in system preferences, click on privacy. Now add the drive that you want to re - index to privacy window. Now delete this same player of the Privacy window, and it will now be indexed/rebuilt. No necessary terminal command.

• I'll do a clean install on a blank hard drive upgrade but want to keep my Firefox settings - what is the best way to do this?

  I'll do an upgrade from Windows XP to Windows 7. I will be installing Windows 7 on a new empty hard drive. I want to keep my bookmarks Firefox and Ad Ons. What is the best way to do it. Thank you for your help.

  Hello

  The best thing for you to do is to make a backup of your Firefox profile. It is a folder that stores bookmarks and Add-ons that you can then add to the reinstalled Firefox on your new operating system.

  Learn you more about the Firefox profile folder, how to backup and restore, here.

  I hope this helps, but if not, please come back here and we can look at in another option for you.

• My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

  My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

  I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

  Thank you guys

  A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

  Good luck!

• What is the best software project management for a Mac

  Hi I just bought a MacBook Pro for my business. My company has won an engineering project that I will be the Project Director. My client uses MS Projects, I can't on my Mac, what is the best option

  John

  Maybe this blog Capterra article can help you with choices for an alternative to MS Project for Macs.

  However, what I would recommend is to run Windows under BootCamp or a virtual machine, such as Parallels or VMware and then, install a version of Windows from MS Project to be entirely compatible with what your company uses.

• What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  I have an iMac with a capacity to 1.11 - 679,49 GB available. With the software updated.

  Model name: I

  I have emails out of my different accounts in a "random" folder, but is not free up space. If I move an email in "Archives" and then it always remains in the e-mail account, apparently duplicate email in two places. "

  ERGO: the question is...

  What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  (I hope I've inserted which may be useful, but I'm not sure about that.)

  Thank you

  ilenefrombaltimore

  Archive messages or move them to some other local mailboxes or mailboxes on the server. Don't know what you are trying to do because it appears that you have 2/3 of your hard disk.

  Why do you think archiving emails in 2 places? Where are you trying to save space to?