Generation of the user interface of function error

Similar Questions

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• Call functions of qml in main.qml of a part of the user interface of the part without application head.

  Hi all;

  I wanted that my application runs in the background (Headless) but first encountered several problems, calculation are qml functions (in main.qml: updateUi() with call javascript *.js files), who should I call their headless part when the part of the user interface is closed by the user? Please help me if you have any solution.

  Thank you very much.

  identify what treatment you need for the game without head and migrate to c + c++ / Qt.

• Error message is "launch the user interface and to reinstall the application" after executing the quick backup.

  Original title: speedy

  My pc tells me to open the settings of the user interface on my windows laptop 8. I currently have

  has ran a quick backup, and now iiiimy pc asks me to open the user interface and I have to reinstall the application

  not known were and how to find what to do.

  Hello

  Please contact Microsoft Community. I've surely you will help solve this problem.

  To better understand the issue, let me know if you get this error when executing quick backup?

  If you get this error message when running fast backup software, you can visit the article to uninstall and reinstall the software.

  http://TechSupport.SpeedyPC.com/system/templates/selfservice/speedybackup/#Portal/1013/article/8478/how-do-I-uninstall-and-reinstall-the-program

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• a reminder of the user interface will have a function with arguments?

  some ScriptUI quirks... I have a function (cut in this example) that I can call very well by itself of the extendScript window or if I set directly to the onClick callback, but when I try and call the function from a reminder and analyze arguments, the onClick is not working and the service runs once when the script runs first? what I am doing wrong?

  It works using the extend script window

  Nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  This works when the button is clicked in the user interface

  
  

  myButton.onClick = function() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  This also works when the button is clicked in the user interface

  
  

  myButton.onClick = boost

  
  

  function nudge() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  but when I try and pass arguments (kind of functions) that does not

  
  

  myButton.onClick = nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  OK, in the case where someone is interested... the solution with the permission of Mr. Lloyd Alvarez is to nest the function in another function call, why, I have no idea, but it works a treat...

  myButton.onClick = function() {nudge (23,77)}

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")

  }

• Get speech recognition error message could not start because the configuration of the language is not supported, the language must match the language of the user interface

  I am running Windows 7 Ultimate 32 bit, when I run speech recognition it fails and the following message appears,

  Voice recognition couldn't start because the configuration of the language is not supported, the language must match the language of the user interface.

  I tried to change the language, then back to British English, but the problem is still there, I'd appreciate any help with this problem

  Is there a solution to this problem yet?

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Why me disables the user interface click on another button, while it performs a scan?

  Hello

  When I run the user interface and click on a button that is sweeping the voltage for a period of time, I can't press any other button that sits on my Panel, lets say the Abort button that would prevent the action.

  So when I take the data and I realize that I should stop him before he finishes the scan, I can't and it's a really bad drawback.

  How can I improve this problem?

  Thank you

  Hi m.s.taba,

  It seems to me that your code runs the function leave but does not exit the loop you are, then the program stops at the end of the loop.

  To avoid this, you can:

  • use a global variable to the time your long recall and the recall of quit smoking
  • Call ProcessSytemEvents in the loop
  • reminder for the button leave defines the global variable
  • inside the loop, immediately after ProcessSystemEvents, you should test the value of the variable, and if the value you must break out of the loop
  • only after the exit of the loop, you can complete your program

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• How can I update the user interface controls in the UI thread

  Hi all

  I want to do a custom image to display this URL source support.

  I start a thread to ask the image of the network data, and then update the display of the image with the data, but I get the error:

  ApplicationPrivate::resourceManager: ERROR called from the thread of user QThread (0x81eeb8c) interface
  ApplicationPrivate::resourceManager: A user interface thread named method

  It's my code segment:

  class URLImageView: public CustomControl, public QThread
  {
  public:
      URLImageView();
  private:
      void run();
  
      ImageView* mImageView;
      Container* mRootContainer;
  };
  
  URLImageView::URLImageView()
  {
      mRootContainer = Container::create().background(Color::Gray).preferredSize(100,100);
      mImageView = ImageView::create().image(QUrl("asset:///button.png"));
  
      mRootContainer->add(mImageView);
      setRoot(mRootContainer);
      start();
  }
  
  void URLImageView::run()
  {
      //get data from network
      //...
      //...
              //create image from binary data        Image* image = new Image(pixelBuffer);
      mImageView->setImage(image);
  }
  

  I know that in the old BB OS (Java Platform), I can get the lock of event request like this UI:

  synchronized (Application.getEventLock())
  {
          // I can update UI control here
  }
  

  Is it same way to Cascades BB10 or what is the right way, if I want to update the user interface in the UI thread?

  Thank you
  

  This looks like what signals are useful for, when it is connected with the option QueuedConnection. I don't have a link for you, but I'm sure that you can get with this description.

• Need help with this code to update the user interface example

  I'm triying to understand the differences between the three methods to manage UI interactions.
  I'm really confused with these three terms when triying them figure out in a real case.
  Basically, I know that I should use invokeLater, invokeAndWat, or getEventLock() to avoid
  This exception: java.lang.illegalStateException: engine access UI without holding the lock on the event

  The code below illustrates the function of the invokeAndWait method, but if I replace it with
  invokeLater or getEventLock() the program will work exactly the same way.
  Could you please change the code to show the differences between the three
  methods of updating the user interface?

  / public final class HelloWorldMainScreen extends form {}

  private LabelField labelField;
  public HelloWorldMainScreen() {}
  labelField = new LabelField ("Hello World");
  Add (labelField);
  Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
  thread. Start();
  }

  {} public void appendLabelText (String text)
  labelField.setText(labelField.getText()+"\n"+text);
  }

  }

  SerializableAttribute public class MainScreenUpdaterThread extends Thread {}
  HelloWorldMainScreen screen;

  public MainScreenUpdaterThread (screen HelloWorldMainScreen) {}
  this.mainScreen = screen;
  }

  public void run() {}
  for (int i = 0; i)< 10;="" i++)="">
  try {}
  Thread.Sleep (5000);
  } catch (InterruptedException ex) {};
  UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}
  public void run() {}
  mainScreen.appendLabelText ("Update");
  }
  });

  }
  }
  }

  These three concepts are very confusing for a lot from people so all explanatory source code
  describing their functions will be highly useful for everyone, I think.

  Thanks in advance!

  With respect to the effect, there is no difference between methods.  The difference is the way in which the result is achieved.  So we can't change the code to show you the difference.

  As we are unable to demonstrate the difference, you have to do with an explanation.  To understand the explanation, you'll need to understand the thread of events, so if you have not already, please consider this:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

  If the three options are differentiated by the processing order:

  (a) invokeLater executes the update on the thread of events.  The transformation takes place at a later stage and the code which is in order after the invokeLater will actually run before the code within the invokeLater.

  (b) invokeAndWait also manages the update on the thread of events, which means that all other events that await on the thread of events will be run before this code.  But any code after the invokeAndWait will not be executed.

  (c) the synchronized option, like invokeAndWait, runs the update of the UI before moving on to the following code.  The difference is that the code to run on the event Thread is not executed before code in the synchronized block.

  If this is meaningless, so that probably does not matter too much.  in general, you should use invokeLater, except if you need to update the user interface occur in the order with your background processing.  If so, use invokeAndWait. It has synced are very few occasions where you must use the block, and it should be very small updates to the user interface and you should understand the implications this could have on the wire events.

• How to upgrade to the user interface of a screen that is extracted from the stack?

  Hello

  I am currently having a problem in the UI update.

  I have two screens called 'OverviewScreen' & 'DetailScreen' and in the upper part of the two screens, I have three buttons

  (i) back

  (II) next

  (III) charging

  In the entry of the app normally I posted the 'OverviewScreen' and in this screen, back, next buttons are inactive positions (just to have two sets of images, one active and one for idle) and if the user clicks on an item that is displayed in the cell, then I'll navigate the user to the "DetailScreen".

  Now the stack should have two screens,

  at the bottom - "OverviewScreen".

  at the top - "DetailScreen".

  and in the "DetailScreen" - I showed the image is active for the "back" button (because the screen is lower in the stack) and for the next inactive button image.

  Now if the user clicks the back button I navigates to the "OverviewScreen" which is called the UiApplication.getUiApplication (.getActiveScreen) (m:System.NET.Sockets.Socket.close ()); in the case of touch

  Now the "OverviewScreen" located in the bottom of the stack to the front UI (basically when I built it for the first time, it contains inactive images next and back) - what I want here is I need to show the following active image therefore needs to update the user interface of the screen that displays battery

  Because,

  OverviewScreen (back, next inactive images)--> DetailScreen (back - active, next - inactive)--> new OverviewScreen (should show the back - off, next - active)

  For this, I tried with what follows, but none works,

  If (event.getEvent () == TouchEvent.CLICK) {}
  UiApplication.getUiApplication () .getActiveScreen () .getScreenBelow () .updateDisplay ();
  UiApplication.getUiApplication () .getActiveScreen () m:System.NET.Sockets.Socket.close ();
  Returns true;
  }

  I even tried with invalidate() and dopaint() but none works

  However, I realized the functionality if I press the off button in the "OverviewScreen" he navigated me to the "DetailScreen", juice wants to show the icon active next button?

  What should I do to repaint or update the user interface of the screen here?

  Thanks in advance,

  Kitty.

  Found a solution

  Override the method which is found in the net.rim.device.api.ui.container.MainScreen and in this method, I have changed the image for the button and this method is called in the current active screen using getActiveScreen () .getScreenBelow)

• How to intercept the sockettimeout exception message and display in the user interface of the view?

  Hi my jdev - 11.1.1.7 version

  I ask a socket connection in my AM and I want to catch the exception of the sockettimeout of t and display the error message in the user interface of the view layer.

  I use customException class that extends DCErrorHandlerImpl, but if we use try catch, then exceptions doesnot reach customclass.

  How to catch exceptions and return to view the layer if we use the operation binding. ?

  Because you call the operation via the link layer, which is perfectly fine, you do not get an exception at all. Exceptions thrown in methods called via the link layer are captured by the framework and transferred to the appellant in the operation binding.

  For that, you get the list of errors after the call returns and add them as messages of faces

  execute the method

  Method.Execute ();

  List errors = method.getErrors ();

  If (! errors.isEmpty ()) {}

  handle errors errors here is a list of exceptions!

  We only get the first

  E receive = errors.get (0);

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, e.getMessage (), "");

  FacesContext.getCurrentInstance () .addMessage (null, msg);

  }

  no error return to normal work

  Timo