Acrobat 11 Standard will not communicate with my printer/scanner

Similar Questions

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• my laptop will not communicate with my printer

  I have an acer extensa 5430 and a series of hp 4400 printer all in one.  Installing the drivers appropriate etc... controls of diagnostics say printer works fine but it will not be printed

  Hi jamesbauer,

  ·         You did it change?

  ·         If it works well before?

  Try the following.

  Method 1: Run automated troubleshooting and check if it helps.

  Problems printing and printing errors

  Method 2: Check if the following might help.

  Printer in Windows problems

• Computer laptop Toshiba L505-S5990 will not communicate with my printer

  Windows 7 and my laptop is no longer communicates with my wireless printer.

  Manufacturers of printer general advice would be to disconnect / unplug the printer, then uninstall all printer via Add/Remove software, restart the PC. Then gets the latest version of the full version of the site of manufacturers of printer software and plug only / pwr on the printer when the installation says to

• Windows will not communicate with the printer

  Tried to print a document of all programs on windows vista and nothing does, can't get emails or internet content to print either. The only thing I can get to print is the printer test page. Even went as far as buying a new printer, installed software, and the same results. Need help please!

  Hi boatwasher,

  First, you'll want to check your printer manufacturer's Web site to ensure that you have the latest software/drivers.

  Also, please see the similar post with a few other troubleshooting below:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/db63a068-cea4-4221-B37A-b4d6bb1ea8eb

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• my computer will not communicate with my printer

  When I want to print that it isn't shows 0 in queue.

  Make sure that the printer cable is connected and firmly fixed.

  Restart the computer.

  Turn the printer power on and off.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• The tablet of Microsoft Surface will not work with my printer HP Photosmart 5510 current wireless?

  I need to get a new laptop as my only current becomes slow and unresponsive, so I thought I'd do a Microsoft Surface tablet when they become available. I only bought my printer a couple of months, and it would really be a guy, if it was not compatible with the Surface.

  Also, I downloaded the Windows 8 Preview of consumers, and in trying to connect my printer, it wouldn't install because it did not support the operating system, telling me to make sure I was using XP or Win 7. After a few weeks, I returned to windows 7. Does this mean that my printer will not work with any version of Windows 8, either on a tablet or PC?
  I thank in advance.

  HP alone are responsible for the support of pilot and he will be at their discretion. If it is a very recent model, HP will probably out drivers more or less at the same time as Windows 8 in fact for the shelves of stores...

• My iPhone 6 will not communicate with my Mazda 3

  Can I connect my iPhone SE my Mazda 3 SP25 communication, but it will not allow my sms or emails out as he used to do with my android phone. I followed suggestions for the activation of notifications via the Bluetooth settings, and while the SMS function is now not grayed out it will not update the sms as it should?

  It is a huge problem because I just bought the changing iPhone to Android?

  I hope it is going to be a change of software to solve this problem, because it is quite common?

  Please notify

  Kay has soon

  Hi kayfrommelbourne!

  I see that the functions of your iPhone work properly with your Mazda.  I know it's important to have these features work properly, and I'm happy to help you.  Don't forget to contact Mazda as well, to see if they have an available firmware update to resolve compatibility issues.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• Presentation of Adobe acrobat 9 pro can not communicate with hp officejet 8600 premium pro scanner via WAI

  Scanner works with the HP software and test successfully with HP Diagnostic Utility 4.2.  However, when I try to create a PDF document from the scanner by using Adobe Acrobat 9 Pro I get an error message indicating that Adobe cannot communicate with the scanner HP 8600 WAI or Twain.

  I've worked fine before with my HP 6380 hooked up via USB

  Hi jusandi,

  Because the printer is able to scan from HP and Microsoft paint software then the problem you are having is with the Adobe Acrobat 9 software. My first suggestion would be to uninstall the program and then reinstall it to see if the problem persists. If you still have the same problem, you need to contact Adobe technical support.

• My HP Deskjet F380 All in One printer will not communicate with Vista system

  My HP Deskjet F380 All in One Printer worked correctly for always until 25/04/11 and then later it stopped working.  I swear to you that I have nothing else so he can stop working.  I have lost the disc that came with the printer.  When I bought this way while you, I simply plugged it and a pilot has been downloaed righ away and it worked (aka plug & play).  Any help would be greatly appreciated thanks!

  Hello

  I suggest try to download the latest drivers from the link below and check if this can help:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  It will be useful.

• Photosmart C7280 will not communicate with the network. The diagnosis says that the Radio does not

  Photosmart C7280 C5582A work through a MacBook via a Mac (OS 10.5.7) wireless router was working fine last week.  Today when I tried to print, the printer was stuck in the "printing page 37%.  When I checked the Print Manager, the printer was "slowed" and since I had a lot of trouble with this printer connection before losing, I did what HP told me the last time which was to remove the printer and then recharge it.  Except that this time, once the printer has been deleted, he could not find the printer even after I restarted the wizard and reinstated the SSID and WPA many times.  I have reset the printer and the router by turning off and disconnect power provided, but he still had the same problem.  When I ran the diagnosis, he told me: 'Pass on Radio, Radio work on failure, not plugged cable Ethernet-Pass' the rest of diagnosis is "not run" and other data on diagnostic tests are the Mac addess.  The Diagnostic says the "wireless radio does not work.  Contact HP support.  Unfortunately, it's evening Sat and HP support is closed.  Any help or is this printer dead?  (I spent a fortune on ink cartridges)

  It is indeed a hardware problem then.  I'm sorry.

  I always believe that repair costs would be better put towards buying a new printer.

  However, there may be options that I'm not aware where do not have access to.  This document has some support listed options.

  However, I recommend you contact HP support at the 1-800-474-6836 (to the United States and Canada).  Phone support can provide that more than an estimate on the repair or replacement of the printer with HP and you could compare this with the cost of a new printer.

  A new printer is under warranty and most likely to be an improvement on an older printer.

• Profile Manager - will not communicate with devices

  Hello

  The profile manager worked until January 26, but he has not worked since. I tried to re-adding devices (it won't register their), and pushing the settings does not work either. I did 2 full reset of the particles, but the two did nothing to solve the problem.

  I am on a network with an AirPort Extreme 192.168. 80, 1640, 5223, 2195-2196 ports are open.

  Thanks in advance!

  David

  Check expired certificates and see if the console connects - available through Console.app - show anything relevant to the Profile Manager and related errors.

• Want 4500, photo-puce 5520: insert a scan on Windows 8 may but impossible with 10 windows, PC will not communicate with scan

  System worked well until I upgraded to Windows 10. Have uninstalled and reinstalled the software of the printer without success. My printers are connected to the PC, portable usb wireless but problem occurs on both. Using the Clipboard to MS Word 2007, error indicates communication problems and suggest the firewall settings might be the problem. Went from wirewall without success. Printers manually scan ok.  I will be very grateful to solve this problem.

  Thank you

  sussexoldboy

  HI @sussexoldboy.

  Welcome to the Forums of HP's Support. I understand that you have a problem with the analysis since the upgrade to Windows 10.

  Try to go into this document. Printers HP - after Windows 10 Upgrade, arise from printer problems

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Lexmark X 5495 all-in-One Printer will not communicate with Acer running Windows 7

  I have an Acer with Windows 7 installed, allowing no communication with my Lexmark X 5495. The Lexmark works very well and I was able to copy when you use a laptop with Vista installed. I tried uninstalling and reinstalling, fixation with recommended updates and it still has a communication problem. I also got a new usb cable which was obviously not the problem.

  Hello

  Have you checked to ensure that they support this device on Windows 7 and there are no known issues with Lexmark?

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  If they do not support this device on Windows 7, here are some things you can try.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  Tell us what you find.

  Concerning

• PC will not communicate with HP Photosmart 5510 printer which works fine...

  My printer works fine when testing printing/scanning...it shows that I have a good network connection, however, when I click on 'print', absolutely nothing happens... even not an error... it worked one morning and in the afternoon, did not... Anyone know what is happening?

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/