Computer laptop Toshiba L505-S5990 will not communicate with my printer

Similar Questions

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Computer laptop 32 bit Vista will not shareprint with XP Office officejet v40 printer. Help, please

  I have read forums and tried everything for 4 days without luck.

  I'm trying to print from my 32-bit vista laptop to my printer of office xp... an old officejet v40 printer.

  The office prints well on this printer from xp desktop attached and I named shared printer.  All security and firewall disabled. I started at least 20 times and have tried to install unsuccessfully

  It seems that the HP driver Web page has a driver for vista, BUT the instructions are only if you hang the printer directly with the USB... No shared networking. I always thought that you could just download the dirver to the computer and it turns when you go to install it. I made for the devil to the hook to the top of my computer vista laptop directly to the printer and it installs and works fine... BUT I want it in a network or shared... no USB.

  Also, if I go to "Add a network printer" and select the printer in office shared in the list, it will be in my control panel as a printer on my laptop, but when I hit print, I get the pop box, which allows you to set the preferences, print etc, and when I hit print again, the small pop-up box flashes on for a second that it's printing paper... but no printing. Instead of this, when go to see what happened to the list of document status, I see the State of the document listed as error - printing"

  I don't know if I have vista for this printer driver in my laptop or what? I'm totally confused by the present. I read somewhere that there is no way for a computer vista laptop to print over the network to this HP printer while the printer is connected directly to a computer running XP? Is this true?

  I rarely if ever gave to be beaten by computer problems... but this one had me done bankruptcy for the third time and about to give up. Any help would be appreciated.

  THIS TIME IT WORKED! After several months of not being able to print from my computer vista laptop for my v40 OfficeJet (which is connected to my desktop XP) I decided that I would give it one more try. I used once more Bob of the 2nd ad above, as well as suggesion Eddy's instructions to select "New Port" when you arrive at the end close to Bob's instructions. THIS TIME IT WORKED! I think I'm out track somewhere when I tried to do this several months ago. In any case, I thought that I have would expand a bit on what Bob wrote just in case there's someone that who needs a little more in detail. (For a beginner, even the smallest thing can be stumbling blocks if you have never done this kind of thing before)

  On your computer vista laptop, go to printers and Control Panel. When you click the Printers icon you can click on add printer and select Add local printer (it even if it is not a local printer, but a printer that is connected to your desktop computer in another room) Ok... Then select "Use the existing Port" LP1. Then you select your printer from the list and click on it to install the driver. I think that you then click FINISH. (No you are not really over, so don't bother is not clicking on this Test Page again). Once you click FINISH, you will automatically be on the screen that shows the printers you have installed on your laptop. for help. You will then see the the OfficeJet v40 as the printer that you just installed. Highlight and right click. Then select "Run as Administrator". That will open a submenu where you and then click Properties. Then click on Ports, Add Port. Select "Local Port" and click "New Port" (as Eddy proposed). A small screen will appear where you enter now the \\NameOfPrinterYouArePrintingTo\ShareNameOfThatPrinter once you do this and click on apply and OK, you will be brought to a final screen where you will notice that the box LP1 is more verified. Place a check mark was automatically placed in the new port that you just created above IE name\sharename.  YOUR DONE!

• my laptop will not communicate with my printer

  I have an acer extensa 5430 and a series of hp 4400 printer all in one.  Installing the drivers appropriate etc... controls of diagnostics say printer works fine but it will not be printed

  Hi jamesbauer,

  ·         You did it change?

  ·         If it works well before?

  Try the following.

  Method 1: Run automated troubleshooting and check if it helps.

  Problems printing and printing errors

  Method 2: Check if the following might help.

  Printer in Windows problems

• my computer will not communicate with my printer

  When I want to print that it isn't shows 0 in queue.

  Make sure that the printer cable is connected and firmly fixed.

  Restart the computer.

  Turn the printer power on and off.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Windows will not communicate with the printer

  Tried to print a document of all programs on windows vista and nothing does, can't get emails or internet content to print either. The only thing I can get to print is the printer test page. Even went as far as buying a new printer, installed software, and the same results. Need help please!

  Hi boatwasher,

  First, you'll want to check your printer manufacturer's Web site to ensure that you have the latest software/drivers.

  Also, please see the similar post with a few other troubleshooting below:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/db63a068-cea4-4221-B37A-b4d6bb1ea8eb

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Acrobat 11 Standard will not communicate with my printer/scanner

  Printer/scanner Epson drivers installed successfully.  Printing and scanning are possible for all platforms, but Adobe Acrobat Standard 11 won't find the scanner to create PDF files.  Any suggestions?

  Spoke with Epson and the problem is now solved.  We removed the scanner setting and set up a new scanner using the correct IP address.

  Thanks for your reply.

• The tablet of Microsoft Surface will not work with my printer HP Photosmart 5510 current wireless?

  I need to get a new laptop as my only current becomes slow and unresponsive, so I thought I'd do a Microsoft Surface tablet when they become available. I only bought my printer a couple of months, and it would really be a guy, if it was not compatible with the Surface.

  Also, I downloaded the Windows 8 Preview of consumers, and in trying to connect my printer, it wouldn't install because it did not support the operating system, telling me to make sure I was using XP or Win 7. After a few weeks, I returned to windows 7. Does this mean that my printer will not work with any version of Windows 8, either on a tablet or PC?
  I thank in advance.

  HP alone are responsible for the support of pilot and he will be at their discretion. If it is a very recent model, HP will probably out drivers more or less at the same time as Windows 8 in fact for the shelves of stores...

• computer laptop 15-fo39wm: updates will not install

  I have updates that will download, but will not install

  Hi @help987 ,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you encounter a problem installing your Windows updates.

  Please try these steps.

  Method 1:

  I would suggest to run Windows Update to convenience store and check if it helps.

  (a) press the Windows Key + W key on the keyboard.
  (b) resolution of the problems of type in the search box, and then press ENTER.
  (c) select Troubleshooting. Click on show all the and select Windows Update and follow the on-screen instructions.

  Method 2:

  I suggest perform you a boot in minimum mode and disable the security software and check if you are able to install windows update manually.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  (a) press Windows + R Type msconfig in the search box and then press or click on msconfig.

  (b) the Services of the System Configuration dialog tab, tap or click to select the hide all Microsoft services check box, and then press or click disable all.

  (c) on the start-up of the System Configuration dialog tab, tap or click Open the Task Manager.

  (d) the tab to Start in the Manager of tasks, for each startup item, select the item, and then click disable.

  (e) close the Task Manager.

  (f) on the start-up of the System Configuration dialog tab, press or click OK, and then restart the computer.

  Note: once you have finished troubleshooting, follow the steps in "How to reset the computer to start as usual after a repair by clean boot " to reset the computer as usual.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Download and install the update manually and check if it helps.

  Follow the steps to install the update manually:

  a. go to the Microsoft Download Center page

  b. type the number in the search box and press ENTER.

  c. download and install the update and check if it helps.

  You can see the steps in the following Microsoft article.

  Problems with installing updates

  Good luck!

• Qosmio F50 - 108 - Toshiba Flash Cards will not work with Windows 7

  Hello

  anyone tried to install Windows Seven? I tried.
  Everything works fine (Wlan, Lan, sound, etc.), but one thing is unable to work on my laptop: Toshiba Flash Cards.
  I installed the driver, and nothing happened...

  Any idea to solve this problem? Because I usually used it in Vista.

  Thank you and sorry for my English ;-)

  Hello

  The Toshiba Flash Cards has been designed for Windows Vista only

  Windows 7 is very similar to the Vista and many pilots could and would go with Windows 7, but in very rare cases certain tools would not fully compatible

  The Toshiba Flash Cards is not a driver; It s a utility that seems to be is not compatible with Windows 7

  Good bye

• My iPhone 6 will not communicate with my Mazda 3

  Can I connect my iPhone SE my Mazda 3 SP25 communication, but it will not allow my sms or emails out as he used to do with my android phone. I followed suggestions for the activation of notifications via the Bluetooth settings, and while the SMS function is now not grayed out it will not update the sms as it should?

  It is a huge problem because I just bought the changing iPhone to Android?

  I hope it is going to be a change of software to solve this problem, because it is quite common?

  Please notify

  Kay has soon

  Hi kayfrommelbourne!

  I see that the functions of your iPhone work properly with your Mazda.  I know it's important to have these features work properly, and I'm happy to help you.  Don't forget to contact Mazda as well, to see if they have an available firmware update to resolve compatibility issues.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• My HP Deskjet F380 All in One printer will not communicate with Vista system

  My HP Deskjet F380 All in One Printer worked correctly for always until 25/04/11 and then later it stopped working.  I swear to you that I have nothing else so he can stop working.  I have lost the disc that came with the printer.  When I bought this way while you, I simply plugged it and a pilot has been downloaed righ away and it worked (aka plug & play).  Any help would be greatly appreciated thanks!

  Hello

  I suggest try to download the latest drivers from the link below and check if this can help:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  It will be useful.

• Photosmart C7280 will not communicate with the network. The diagnosis says that the Radio does not

  Photosmart C7280 C5582A work through a MacBook via a Mac (OS 10.5.7) wireless router was working fine last week.  Today when I tried to print, the printer was stuck in the "printing page 37%.  When I checked the Print Manager, the printer was "slowed" and since I had a lot of trouble with this printer connection before losing, I did what HP told me the last time which was to remove the printer and then recharge it.  Except that this time, once the printer has been deleted, he could not find the printer even after I restarted the wizard and reinstated the SSID and WPA many times.  I have reset the printer and the router by turning off and disconnect power provided, but he still had the same problem.  When I ran the diagnosis, he told me: 'Pass on Radio, Radio work on failure, not plugged cable Ethernet-Pass' the rest of diagnosis is "not run" and other data on diagnostic tests are the Mac addess.  The Diagnostic says the "wireless radio does not work.  Contact HP support.  Unfortunately, it's evening Sat and HP support is closed.  Any help or is this printer dead?  (I spent a fortune on ink cartridges)

  It is indeed a hardware problem then.  I'm sorry.

  I always believe that repair costs would be better put towards buying a new printer.

  However, there may be options that I'm not aware where do not have access to.  This document has some support listed options.

  However, I recommend you contact HP support at the 1-800-474-6836 (to the United States and Canada).  Phone support can provide that more than an estimate on the repair or replacement of the printer with HP and you could compare this with the cost of a new printer.

  A new printer is under warranty and most likely to be an improvement on an older printer.

• printers HP c310 will not communicate with computer-spontaneously-hp could not help problem

  HP printer c310 Wireless quit spontaneously connect with hp computer - tech hp unable to diagnose/Fix

  Hi Cheryltralle,

  ·         What operating system is installed on your computer?

  ·         What exactly happens when you try to connect to the printer? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Please answer the question so that we get the best idea of the issue that you are facing. In the meantime, you can consult the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

   

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Hope this information helps.

• Printer will not communicate with the computer.

  Original title: printer nocomunicate

  my printer Lexmark4200series Mod.x4270 and my compurete Compaq Presario5300no communicate

  Lexmark confirms that the version of your installed printer software is supported in IE9 (yet)?