AcroRD32.exe error
Whenever I go to open a PDF file to read it I get an AcroRD32.exe error that says unknown software exception (0 x 4000015) appeared terninate click Ok. This closes the document so I can't read it or print it.
Hello
You can view the following link once and see if that fixes the problem.
Acrobat.exe, Acrord32.exe exit | Close browser. Windows
You can also check the following thread and perform the steps mentioned.
Application AcroRd32.exe error
Let us know how it goes.
Concerning
Sukrit diallo
Tags: Acrobat
Similar Questions
-
Acrobat DC causes AcroRd32.exe application error when opening .pdf on my computer
With Acrobat DC, I seem to be able to open some files PDF but not others. Acrobat 10, open to all, and that's what I need. I get an application called AcroRd32.exe error, then I have to close the program. What should I do? Thank you, Russ
Hello
Please consult the next forum thread and see if that fixes the problem.
Reader Adobe has stopped working
Concerning
Sukrit diallo
-
Recently decided to upgrade to Acrobat DC after discovering that she will allow me to OCR files that previously forced me to spend of TIFF, and then back.
I downloaded the program and installed today. I was the conversion of Acrobat 9. After that I started uninstalling Acrobat 9 Pro, Windows Explorer has started crashing. I finally restored the computer
I checked the Microsoft forums to see what could have gone wrong, and they seem to indicate that I should run sfc in the prompt, then see if there are problems in the registry. Here, of course, began with today or yesterday (which doesn't make sense - not sure that the report gave me irreparable files, or both fixed and fixed, or what). Other research suggests that I do a disk cleanup, and since then I had the problem of Windows Explorer.
I tried then just install Acrobat DC on Acrobat 9. This seemed to work properly. However, now I have problems with Acrobat to crash (although the window remains open?). The message says that acrord32.exe is the culprit. In addition, a number of my PDF files cannot be replaced - if I want to save my changes, I have to save to a different folder, delete the old file and move the other in its place.
It's basically a nightmare, and I lost a ton of productivity today putting out fires. Do not have these problems until I started playing with Acrobat.
Please give me some suggestions.
Thank you
In fact, I could hope to find the solution on this thread:
Adobe Reader DC contains errors and crashes with Windows Server R2 2012
Going to see how it goes with the preview pane disabled (although she will suck if I can't use TI - hope you guys who patch).
Also, add a folder by the instructions under C:/User / [USER] / AppData.
In the hope that this problem will be solved in between.
EDIT: It looks like it fix the problem. Acrobat Pro DC now works without any problem.
-
Problem: APPCRASH acrord32.exe pop ups very often. How to fix?
I get this pop-up all the time, several times throughout the day:
Here is the full copy and paste the error details:
Signature of the problem:
Problem event name: APPCRASH
Application name: acrord32.exe
Application version: 15.8.20082.15957
Application timestamp: 55960b 88
Fault Module name: acrord32.exe
Fault Module Version: 15.8.20082.15957
Timestamp of Module error: 55960b 88
Exception code: 40000015
Exception offset: 000dfb9d
OS version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
Information additional 1:7196
More information 2: 71966aa44fc90d07542da354f1126cf0
3 more information: 9a 61
Additional information 4: 9a613412be2432f1284ee0e39530abfa
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\WINDOWS\system32\en-US\erofflps.txt
It is very annoying. I have uninstalled twice, Adobe Reader and Acrobat. The first time I uninstalled ALL my CC from Adobe. How can this be repaired?
The pop-up product crash even when Acrobat is not running - and usually right after that that it is closed. If I close the pop-up alert when Acrobat is open, nothing happens, and I can continue to use Acrobat.
Really confused about what's going on here. I need to use Acrobat every day, and it's super frustrating!
Please try the solution here while we are working on a fix: Acrobat DC crashes since upgrading to Creative Cloud CC 2015
-
AcroRd32.exe intermittent fault
Hi all
I am running Win 7 64 bit on my pc works with all service packs and updates installed courses.
I have a problem with Acrobat Reader, that it does not always open the. PDF file, but leaves the AcroRd32.EXE running as a process visible in task Win Manager. These 'orphan' processes accumulate, and I have to 'kill' everything manually.
Sometimes the. PDF will open the first time, and sometimes it takes several clicks of the mouse (which causes the remaining process).
In this case, if I try to open or view the. PDF in Windows Explorer, Firefox, IE11 or MS Outlook.
I tried to uninstall and reinstall and the error still persists, it was also present in previous versions of the player.
It is now become irritating, that I suppose it's a thing to register, but everyone comes through this and is there a solution?
Thank you
Reader 11.0.10 with protected Mode off should not do this. are you sure that you have "Enable Protected Mode at startup' unchecked?
-
My computer starts up and I am able to work on it, but showing the sgm.exe error
Hello
Thanks for posting in the Forum from HP Support.
The error occurs because there is a problem with this application.
I did some research and I am unable to find such a program with this name that is popular and reputable.
Having said that, I also found some virus/malware that uses this name.
Search your computer for threats/viruses using these free tools:
-> ESET Online Scanner
http://support.eset.com/kb2921/?locale=EN_US & viewlocale = en_US
http://www.eset.com/int/home/products/online-scanner/
-> HitmanPro
http://www.SurfRight.nl/en/hitmanpro
http://www.SurfRight.nl/en/downloads/
-> AdwCleaner
http://www.bleepingcomputer.com/download/adwcleaner/
If these tools find a malware with this name and extension, remove and others, also.
Please, let me know the results of the analysis. You can also provide screenshots if you want
-
AccelerometerSt.exe error on the computer Windows 10 brand new
I have the same problem that many others have with the Application AccelerometerSt.exe error. BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it. I have the HP Envy x 360. How do you intend that to solve the problem. If you uninstall and reinstall Windows 10, I'll need much more detailed information. I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.
Hello
Try the following.
Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.
When this has completed, restart the laptop.
When windows has reloaded, download and install the version of DriveGuard on the following link.
http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe
Kind regards
DP - K
-
Hello
I have HP Pavilion e002au laptop bought about 5 months back with Windows 8.
I get the explorer.exe error after logging in each time. The laptop seems to work normally, but can someone please tell me what this error is and how it can be eliminated?
I have an original version of Windows antivirus updates and get regularly.
Is it dangerous for the laptop?
Kind regards
Vikram P. Gupte
Hi Vikram6880,
During the execution of any type of control system, you should always back up your documents. The update affects all documents. It was simply an update of the system.
Thank you.
-
nidevmon.exe error 0xc0000142 / niusb6009 multifunction i/o
Our Labview application collects analog data using an e/s of the Multifuncion niusb6009. The application is proven and has been in production for years.
Today, the application has stopped to receive analog data. After the termination of the application, shut down our computer w / Windows XP Pro SP2.
The computer and Windows has restarted. At the opening of our LabView Application, the following error appears:
nidevmon.exe error: "the Application failed to initialize properly (0xc0000142) click OK to terminate the application.»
Scuba Steve Howdy!
Is there something that could have been changed software/hardware-wise on the machine before this error occurring? Also, what version of LabVIEW and DAQmx do you use?
This could be caused by a number of different things of nidevmon.exe. Please look over this article in the knowledge base for possible solutions to the problem.
Kind regards
-
While my pc was going through updates to MS, he projected blue. After the reboot, I now get mscorsvw.exe error
Hi frank platt,.
What the full error messages you found?
After return from error messages full so that we can help you better.
I suggest you to reset the Windows Update components. Then try to install an update at a time and checking update problem. After return to status so that we can help you better.To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
http://support.Microsoft.com/kb/971058Hope this information is useful.
Umesh P - Microsoft Support -
I can't install WGAPluginInstall.exe error 0 x 80070003 help
HI the FRIENDS MY SYSTEM IS SICK, I CAN NOT INSTALL WGAPluginInstall.exe ERROR IS 0 x 80070003 I CAN'T DOWNLOAD ANY FILE WITH DOWNLOAD MANAGER (CONNECTION WITH the SERVER IS LOST) I CAN'T OPEN the DOWNLOAD of PAGES WEB BROWSER VIEW WITH BROWSER WEB MY ANTI VIRUS IS up to DATE I am not CONFUSING WHAT IS THE PROBLEM
Amin,
Remove the download directory and then to return to the update sites. to do this, follow these steps:
1. stop the automatic updates service. to do this, follow these steps:
a. Click Start, click Run, typeservices.mscand then click ok.
b. Automatic Updates service right click and then click on stop.
c. minimize the software component services snap-in.
2. rename the c:\Windows\SoftwareDistribution directory. to do this, follow these steps:
a. Click Start, click Run, typecmdand then click ok.
b. type cd %windir%, and then press ENTER.
c. type ren C:\Windows\SoftwareDistribution SDTemp, and then press enter
d. type exitand press ENTER.
Note when you delete the folder % windir%\softwaredistribution, the history list is erased from the section "review updates" site web windows update. This action will not affect the updates installed on your computer. subsequent updates will appear in the history list.
3. start the automatic updates service. to do this, follow these steps:
a. expand the component services snap-in.
b. right click on updates service automatic and then click Start.
c. close the window of the software component services snap-in.
4. visit the website of windows update, the microsoft update web site or the server wsus again and then download an update.
5. If you still receive the same mistakes, make sure you have correctly completed steps 1-3.
6. If you can't always install the update, see the following microsoft knowledge base:
http://support.Microsoft.com/kb/906602/ installation problems troubleshooting windows update, microsoft update and windows server update
-
I am trying to print a document and I get this message "AcroRD32.exe Unable to locate component"... "app was not able to start because"DLBAGF. " DLL' not found... Reinstall the application can solve problem... can you me please help... Thank you
Moved from feedback
Original title: my problem is with Microsoft Adobe...
No problem.
This link can be a good start for you.
http://forums.Adobe.com/message/4957379
Good luck with the resolution of the problem.
-
Daemonu.exe error turns off my computer. How do fix?
Often, I get an error message after my computer shuts down-Daemonu.exe error. Is there something to fix this problem? Thank you.
Hello
It's the Nvidia Update Manager, so you must check with their Support and Forums.
Would be a good idea to update the driver or re - install the last longer if not recent exists.NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
http://www.nvidia.com/download/index.aspx?lang=en-usNVIDIA Support - check with the support that she might be a known issue
http://www.nvidia.com/page/support.htmlNVIDIA forums - also check for the forums it might be a known issue or others likely to have
http://forums.nvidia.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
In Windows Server 2003, I got the following error "svchost.exe - error on line 392."
Kindly help.
Hi Sophie,.
Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
application spoolsv.exe error.
I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this. Help, please. * E-mail address is removed from the privacy *
Hello
1 did you change on your computer?
2. what service pack is installed on your computer?
3. when exactly did you receive this error message?
4. What is the brand and the number of the printer model do you use?
Method 1:
I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.
Method 2:
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,
Method 3:
I also suggest you to follow the link and check.
Resources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028
See also:
How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP
http://support.Microsoft.com/GP/pc_print_methoddstoptheprin
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Maybe you are looking for
-
How can I stop unwanted sites IE with pornographic mterial
Is there a function filterfunction can I use to stop my children to access some Web sites
-
Outlook Express enter the password
Display in the name of the customer Outlook Express-keep popping up, enter the password and id, and it doesn't have these passwords, former employee never left.
-
Computer "not responding" when I connect the external hard drive.
Hi all When I connect my external hard drive to my laptop, it is detected and the icon for the material appears in the taskbar background. But when I go to my computer, it happens that does not. I can always open other programs etc that are not relat
-
APEX 5.0 Navigation Menu Bug
I started to dive head first into APEX 5.0 and the upgrade of existing applications that I have.I would like to start by saying thank you and congratulations to the APEX of the team for all of their hard work and dedication that went into version 5.0
-
Patch #9593176 question for R12.1.3, 11.2.0.3 Linux
Hello:When I apply 9593176 on the screen there are messages like the breath.=======Patches 7229760, collide with the patch currentlybeing installed (9593176)If you continue, all patches will be restored back and the new patch(9593176) will be install