Message when you try to print "AcroRD32.exe impossible to locate the"..." "Componet app was not able to start because"DLBAGF. "DLL"

Similar Questions

• Error message when you try to print

  I received the following error message when you try to print a document.

  "Spooler subsystem App stopped working and was closed.  Production of Windows warn if the solution is available.

  I have not had any problems with my printer up to today.  How will I be notified by Windows and is there anything else I can do.

  Are you facing this problem when you print using all applications?

  Take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Receives the following message when you try to open a project, "Captivate cannot open the fol.

  Receives the following message when you try to open a project, "Captivate cannot open the next project.  Ensure that the project is not already open... There is enough disk space... "All the critiria are put... still can't open the file.  Please help in the recovery of this project.

  Suggestions here:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/recover-corrupt-project

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• error message when you try to print from the windows photo gallery

  I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper.  I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
  My printer is Dell V515w and is 4 months old.
  Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery.  Any ideas?
  Thank you
  Richn13

  Hello
  See this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/trouble-printing-from-Windows-Photo-Gallery/456cc8bf-9791-4619-82e2-de121deec9d3

  Let us know if it helps.

• When you try to print, get a page that contains the message PCL XL Error, error: InternalError 0 x 50

  Original title: printer Hates Me

  Whenever I try to print anything 1 page out of my printer. It is said.

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  I'm losing my mind!

  PLEASE HELP SOMEONE

  Thank you, Carol

  Hi Carol,.

  Welcome to the Microsoft community!

  When you try to print, you get the message as PCL XL Error, error InternalError 0 x 50.

  PCL XL errors occur when you use the PCL6 drivers.

  1. What is brand and model printer?

  2 - is the printer test page print correctly?

  To fix the problem, you can try to uninstall and reinstall the printer drivers.

  Also, you can turn off the printer for 30 seconds and turn it back on and see if the problem still occurs.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Printer Offline Message When you try to print the Office Word doc

  Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

  Hi Robin,

  Are you facing this printer offline error when you try to print from Microsoft Word?

  Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

  I suggest you try the steps from the following link and see if that helps.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

  I hope this helps. Let us know if you have other problems with Windows in the future.

• print the text too small when you try to print from email to yahoo using the IE browser

  printing text is too small when I try to print email to yahoo mail using the Internet Explorer browser

  shinner

  Welcome to the Community Forum of HP.

  See if anything here helps:

  Manage the print with preview output before printing

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Re: Error Message When you try to print to a network printer

  I just bought the new laptop, and when I try to print to a network printer (one that I always printed at front), I get a message: "The Active Directory Domain Services is currently unavailable" - I can't add a network printer at all! Help!

  Is there a setting I need to change to be able to add network printers?

  I think you should contact your local administrator and let him install this network printer. He knows how to install the correct driver and how to find the location of the printer.

• HP Office Jet Pro 6830 AIO: Getting printer offline message when you try to print

  When I try to print, I can't have a pop-up indicating that the printer is offline.

  If the printer is off / on, it starts printing.

  If I then submit a new print job, then I get the error again.

  I just installed all the latest drivers, including printing software HP and doctor Scan.

  I am running windows on a HP Pavilion g6 10.

  My printer is set to print via wifi and I can see the status of the printer with software 6830

  Hello
  
  Thank you for using the HP Forums.
  
  Can you try using a TCP/IP port?
  
  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.
  
  This video resource will show you how do:
  
  Create & use TCP IP port
  
  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
  
  Let us know if it works

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Error message when you try to print a P.C. LR 2.5. . .

  I don't really know why I get this error message - it reads like this:

  
  

  There is a (or however many there are) image in this print job that is not valid.  She may have been saved in an unsupported file format.  You will not be able to print this image.

  
  

  
  

  But the images were saved in LIGHTROOM!

  
  

  Here's what I did:
  (1) I shoot in RAW - download my photos on LR

  (2) change them accordingly

  (3) export and create a jpg file - they are now re-numbered sequentially.

  (4) I will then import the newly exported jpg back in to LR so that when I create a piece of evidence for my clients names/numbers... that's when I get the above mentioned error message!

  
  

  Help!

  
  

  What I did and how can I fix?

  
  

  Thank you!!

  Could you post one of the offending files? Which could give us some tips. Certainly, you should really have no problem any reimport the jpg file exported from Lightroom and print, even if you have to really make sure that you have enabled "treat files next to raw as a separate photo files jpeg" in the Panel preferences to import, otherwise you could get in the disorders strange if you reimport the jpeg file with the same filename exactly as your RAW files.

  Finally, the last version of the LR is 2.6.1 update at that.

• Why I get these error messages when you try to print a pdf file?

  'This document could not be printed' and then, 'he is have not chosen to print pages.

  I've already printed these backup files.

  EDIT: now, I'm getting "the plugin cannot start the broker.

  What the hell is happening?

  Post edited by: Buckawicki

  All what I can say is that you try to upgrade to the latest version of Reader X with http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.5/misc/AdbeRdrUpd1015.msp