ACS 5.2 - disable logging of user test

Similar Questions

• Disable caching dynamic users of GBA

  Hi all!

  I have a b2 ACS 3.3 (2) what use AD as an external DB. I have experianced, dynamic users created after authentication successful advertising, and these users are serving since the ACS internal database. I did a test environment, and it's the same thing. I improved GBA at 4.0, and it's the same thing.

  I find a mention in the ACS4.0 guide that says the following:

  "Mapped users dynamically dynamically will keep mapped, even when their group."

  mapping settings are changed in a group that is set to disable the cache users mapped dynamically. »

  So my question is, where can disable caching of mapped users dynamically?

  Thanks a lot for the answers!

  By (e)

  Miki

  Miki,

  This is a feature that is added on ACS 4.2 see notes below:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html#wp90436

  Ability to disable the caching of the dynamic administrator users can determine if they want to disable creating dynamic users while using an external database for authentication. Minimum performance disruption occurs to disable the caching of dynamic users.

• How can I disable the guest user to close the PC while the Admin is connected?

  I'm running Windows 7 Ultimate. I found out how to disable the guest user closing at all via the local security policy, but then they can't stop even if the Admin account is offline.

  To clarify a bit, say I want to give my PC to someone, I usually click on change user and connect using the guest account. In this way, they can't access my account because it asks for a password. I want that in such a case, they should not be able to stop the PC as my admin account is always logged.

  However, if someone booted the PC themselves and use the guest account, then they should be able to close too, as my Admin account has not been connected.

  I'm running Windows 7 Ultimate. I discovered how to disable the guest user closing all through local security policy.

  It is the correct method. It is as robust as it is unconditional.

  If you want to have your cake and eat it the guest account must use a powerful "agent" to perform the functions of judgment. A scheduled task would be such an agent. It might work as follows:

  1. Create a scheduled task that runs Script1 to perform these tasks:
     -Check if the C:\Shutdown\Shutdown.txt file exists.
     -If not, the output of the script.
     -If this is the case, delete Shutdown.txt.
     -Check if there is an administrator session. If so, the output of the script.
     S ' there is no live administrator session, shut down the computer by using shutdown.exe.
     The task must run under an administrator account once every 3 minutes.
  2. Create a shortcut on the desktop for the Guest user calling Script2 for these tasks:
     -Check if there is an administrator session.
     -If this is the case, create a pop-up to inform the user that the machine cannot be stopped.
     -If it is not, create the C:\Shutdown\Shutdown.txt file. The scheduled task will 'see' this file and will stop the machine.

• Grant select on the object a.a to user b to user test

  Hello

  I am logged in as user test.

  I would like to issue the following grant.

  grant select on a.a to user b;
  

  Unfortunately, this does not work with the test user. But it works with SYS. What permissions are required for the declaration works as a test.

  Best regards

  Stone

  Documentation, https://docs.oracle.com/cd/E11882_01/server.112/e41084/statements_9013.htm#SQLRF01603

  Prerequisites

  To grant a privilege to system, one of the following conditions must be met:

  • You must have obtained the GRANT ANY PRIVILEGE system privilege. In this case, if you grant the system privilege to a role, then a user who has been granted the role doesn't have the privilege unless the role is enabled in the user's session.
  • You must have been granted the privilege of system with the ADMIN OPTION . In this case, if you grant the system privilege to a role, then a user who has been granted the role has the privilege without worrying if the role is enabled in the user's session.

  To grant a role, you must either got the role with the ADMIN OPTION or have received the GRANT ANY ROLE privilege system, or you must have already created the role.

  To grant a privilege object, you must have the object, or the owner of the object must have a permission you privileges of the object with the GRANT OPTION , or you must have obtained the GRANT ANY OBJECT PRIVILEGE system privilege. If you have the GRANT ANY OBJECT PRIVILEGE , then you can grant the privilege of the object only if the owner of the object could have granted the same privilege of object. In this case, the GRANTOR column of the DBA_TAB_PRIVS view displays the owner of the object rather than the user that issued the GRANT statement.

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• How to manage or disable my 'guest user '.

  How to manage or disable my "Guest User" if I can't click on it and it's all gray? Help, please. I tried to manage or disable my 'guest user' for months now ~ Emma Saige

  Try screen http://osxdaily.com/2011/10/13/disable-guest-user-account-mac-os-x-10-7-2-login-/

• List of names of logged in user

  Hello

  I want a list of all the usernames connected. I tried to use the "name of the query" command using the Exec.vi system but got the error: 'query' is not recognized as internal or external, command an executable program or batch file.

  Is there another way to get a list of the logged in user names?

  Thank you

  Ritesh

  It is in your Windows/System32 directory and this directory is off-limits to non-administrative programs for safety.

  Copy it into another unprotected file, and then use the full path in the copy utility:

  cmd /c 'C:\NewDir\query.exe' user

• Auto disable the administrator user in server 2012.

  Expensive server administrator,

  How to repair auto blocking administrator in windows server 2012?

  My server windows 2012 always disable the administrator user.

  Best regards

  Chamroeun

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to determine currently logged-in - user?

  I opened a command prompt with "runas/user: Administrator cmd" and I need to determine which is the currently logged-on user. Is this possible? Thank you.

  You could install a "grep" utility Windows of the * nix application and filter the row that contains the user who is running the script... as in:
  PsLoggedOn |  grep - v % user_name %

  One place, you could get a grep utility is here:
     <>http://UnxUtils.sourceforge.NET/ >

  HTH,
  JW

• By mistake I have disabled the administrator user and now I am not able to start my laptop as when I try to boot my laptop it says disabled administrator.

  I disabled the administrator since the since the link "my computer / manage / local user and groups / user / administrator / properties." Now I am not been able to start my laptop. When I try to start the laptop, it shows the administrator user is disabled.

   
  Please help with a solution
  
  Biju
  New Delhi

  You must restore your registry to a point in time before that you have disabled the administrator user.  It is not easy if there is any left on the system administrator user.

  One way to do this is to start your computer from a CD rescue-style such as BartPE and UBCD4Win or Linux Livecd such as Knoppix.  You can then follow the steps in the following article from part 2, step 6, using GUI to copy and rename the files rather than orders from command-line specified in article.

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  If you are not experienced, I recommend to get help.

  HTH,
  JW

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Locate the path to the c:\users\test\AppData\Roaming\Microsoft\Internet.

  Word 2010 is installed in "c:\users\test\AppData\Roaming\Microsoft\Internet", but when I try to access this location from these directories from my disk C "AppData" are not displayed. How to check these directories?

  Hello TomB1395,

  The Appdata folders are hidden from users stocks allow you to delete them by mistake. Go to folder options in the control panel. In the folder options window, click the view looking down the list of options until you see 'display the hidden files and folders '. Place a checkmark (tick) in the box and press the button apply. The AppData files should now be visible.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Gets the expiration of user password, any OOTB/task in IOM which disables / deletes the user automatically.

  In IOM after expiration of the user password gets after certain number of days, is there any task/project OOTB in IOM which disables / deletes the user automatically.

  Thank you

  We had to write our own task to disable the user after than XX days since

  password expiration (r2ps2)

• Look for no logged in user to Active Directory

  Hello

  Our application meets with AD where all the users and groups are configured.

  Given a unique ID for a user (non-logged) and ad group name, it is possible to search for this user in this group and return such a value true or false based on whether the user is present in this ad group or not?

  For a logged-in user, we have an established securityContext and it is very easy to do using userInRole ["app_role_name"]. This would tell us whether or not the user belong to this group. But how can we do this for a user not registered?

  I was going through the API OPSS but could not understand it if possible.

  Team database probably for this using the DBMS_LDAP API but I want to make sure you that there is a java solution as I remove the call to the DB.

  Thank you.

  Here you have an example OPSS:

  (MyGroup and MyUser are just POJO)

  Public collection {} getGroupsForUser (MyUser myUser)

  Collection roleList = new ArrayList ();

  IdentityStore idStore = null;

  try {}

  idStore = getIdStore();

  User user = searchUserByUsername (idStore, myUser.getUsername ());

  If (user! = null) {}

  SearchResponse resp = idStore.getRoleManager () .getGrantedRoles (user.getPrincipal (), true);

  While (resp.hasNext ()) {}

  Role = resp.next () (role);

  MyGroup myGroup = new MyGroup();

  myGroup.setName (role.getName ());

  roleList.add (myGroup);

  }

  resp. Close();

  } else

  throw new UnexistentResourceException (myUser, ResourceTypes.IDSTORE);

  } catch (oracle.security.idm.ObjectNotFoundException e) {}

  the user does not exist

  } catch (IMException e) {}

  throw new MySecurityException (e);

  } {Finally

  If (idStore! = null) {}

  try {}

  idStore.close ();

  } catch (Exception e) {}

  }

  }

  }

  Return roleList;

  }

  private getIdStore() {} IdentityStore

  IdentityStore instance;

  try {}

  JpsContextFactory ctxf = JpsContextFactory.getContextFactory ();

  JpsContext ctx = ctxf.getContext ();

  IdentityStoreService storeService = (IdentityStoreService.class) ctx.getServiceInstance;

  If (storeService is nothing)

  throw new MySecurityException ("JPS invalid configuration! Please check your configuration environment");

  instance = storeService.getIdmStore ();

  } catch (JpsException e) {}

  throw new MySecurityException (e);

  }

  return instance;

  }

  /**

  * Returns the user having a certain username of the FIRST identity store

  * WARNING: The user can be duplicated in OPSS, because coming from two different authentication providers

  @param username

  * @return

  */

  private user searchUserByUsername (idStore, String username IdentityStore) {}

  List = new ArrayList ()evaluations1 users;

  IdentityStore idStore1 = null;

  try {}

  idStore1 = getIdStore();

  SimpleSearchFilter filter =.

  idStore1.getSimpleSearchFilter (SimpleSearchFilter.TYPE_EQUAL, "Username", username);

  SearchParameters sps is new SearchParameters (filter, SearchParameters.SEARCH_USERS_ONLY);.

  SearchResponse resp = idStore1.searchUsers (sps);

  While (resp.hasNext ()) {}

  User user = resp.next () (user);

  USERS1. Add (User);

  }

  resp. Close();

  } catch (ObjectNotFoundException exception) e {}

  do nothing, return of empty collections

  } catch (IMException e) {}

  throw new PenfaxSecurityException (e);

  } {Finally

  If (idStore1! = null) {}

  try {}

  idStore1.close ();

  } catch (Exception e) {}

  }

  }

  }

  List of users of = users1;

  If (users.isEmpty ())

  Returns a null value.

  on the other

  Return users.get (0);

  }

• Currently logged-on user in Identity Manager Application

  I have a scenario where you need to capture the currently connected users in User Manager Application of identity so that when the user makes a change (right system UNSAccountBInUNSGroupB) is changed, I can connect this to a new Custom table.

  How to capture the currently logged on user name?

  If it is a component, you can try to use a global function GetUser()

  something like this:

  sqlcompare ("uid_person", GetUser (), "String", "Equal", "none")

  Web designer looking for GetUser() which should show you other examples of this use.