Gets the expiration of user password, any OOTB/task in IOM which disables / deletes the user automatically.
In IOM after expiration of the user password gets after certain number of days, is there any task/project OOTB in IOM which disables / deletes the user automatically.
Thank you
We had to write our own task to disable the user after than XX days since
password expiration (r2ps2)
Tags: Fusion Middleware
Similar Questions
-
I get the same automatic updates
I continue to receive automatic updates for the following: even after download & install them successfully: KB2518870, KB2518864, KB25339631 & KB2539636. Can explain you why & help please?
Hi Richard,
You can read the following article and see if it helps.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
-
I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect. I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC. Any help is greatly appreciated. One of my original case numbers were: 0216572509
You need installed Adobe Creative Cloud. Check the link for more information below.
-
Difficulties of username and password.
In Windows Mail I suddenly wonder for the user name and password. I fill them but receive no mail from mu. I get the message:Account: 'pophost1.classicfm.net', server: 'pophost1.classicfm.net', Protocol: POP3, server response: '-ERR failed the connection. ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92.Please can you help me?Hello
· Were there any changes to the computer, lately?
Method 1:
(a) start the Windows Messaging mail client.
(b) click on 'Tools' from the main menu and choose "accounts".
(c) a pop up will appear showing you all the email accounts in Windows Mail. Select the one that gives you the error and then click on the button 'Properties'.
(d) another window pop up displays all parameters associated with this account.
(e) under the "servers" tab check the 'e-mail username' and 'password'. One of them would certainly incorrect which translates the ID of Windows Mail error 0x800CCC92
(f) to avoid having to enter the user name and password each time, check the box in front of "Remember password".
(g) once you make the appropriate changes, click on the button 'apply' then 'OK'. Close the other pop-up window
Method 2: Remove the existing from Windows mail email account and create a new one following the link provided below.
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account
Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
-
original title: admin password.
I forgot my password for my admin user account, but I have a secondary account how to get the password for the admin
Hello
Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I wanted to know if I could get the passwords for e-mail, facebook, etc for other users on my account? Please let me know. Thank you.
It's in the privacy of having the username and password of someone, but it is advisable to monitor the activity of your child on the internet. In Windows Vista, you have the parental control feature in Control Panel (it's available in some editions). I suggest to go Control Panel and user account and chose to activate and follow your child's account. For Parental control in Windows Vista, take a look on:
http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx
There is also another product of Windows Live, which calls the family safety, to use the mother and the child would need live account. You could learn more about it in view:
http://download.live.com/Familysafety
By these tools, you can monitor your child safety with respection of privacy. It is not a good practice to get the password of your children. Also, you should give it a safety advises on internet. I think it would be a good website to use resources for your daughter:
-
my password does not work on windows vista. I get the message user profile service has no logon
My password does not work. I get the message user profile service has no logon. Help please.
Hello
You can try the following.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore. Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration. When you are finished, Windows will restart as normal in order to check if you can now connect correctly.
Another option if the above does not help is as follows.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select "Start using last good known Configuration" and press ENTER.
Kind regards
DP - K
-
When I go to a favorite websight how can I get the user id and the password to open the view without having to put in me? Barry was soon
Hi Barry,.
Please contact Microsoft Community.
It would be great if you can answer the following question:
What browser you use on the computer?
If you are using Internet explorer, I suggest you to follow these steps to turn on the AutoComplete feature and check if it helps:
(a) open Internet Explorer.
(b) click on the Tools button and then click on Internet Options.
(c) click on the content tab.
(d) under AutoComplete , click settings.
(e) check the address bar, Forms, usernames and passwords on formsand ask me before saving passwords check boxes.
(f) click OKand then click OK again.
Let us know if this can help, and if you need further assistance.
-
[MAF] How to get the user name and password after login?
Hi Experts,
I have a call to REST where it requires identification information of the user (uname and password) to identify the data that belongs to who.
Authentication has been made with OAuth.
I believe that there is an API to get the user name and password in the CRG
See you soon,.
Hendry
Hello.
You don't need to manipulate the credentials yourself in code. MAF will propagate the logon cookie or inject the identification information in the HTTP header if cookies are not supported.
To do this, you must select the purchase option of cookie from the server connection Include in REST in the dialog box create a connection Login MAF , such as discussed here:
http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-securing.htm#ADFMF23732
In addition, you must attach the policy of security appropriate to the connection, as explained here:
http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-Web-services.htm#ADFMF23697
Best regards
Frédéric Desbiens
Senior Product Manager
Mobility and Cloud oracle
Twitter: @BlueberryCoder
-
Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.
I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.
Hi JBRA47,
You can consult the following Microsoft KB article and check if it helps to solve the problem:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: when I try to make any changes, I get a 'need admin permission to do' but when this window to type in password admin come up there is no place to type the password... also cannot add a new user because of this problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- When error I have try to make all the changes that I get the 'need to permission admin to do', but when this window appears the box type the admin password is not there...
- Recent changes to your computer
- What you have already tried to solve the problem
Hello1. when the question is is produced?2. did you of recent changes made to your computer before the problem?3. is it a standard or a user administrator account?Follow these steps and check if the problem persists.Step 1:You can try setting the default Administrator account and check if you can solve the problem.It is a security feature in Vista that will let you do it from any other account except the administrator account.a. click the Start button(b) in the Start Menu, click all programs followed accessoriesc. in the menu accessories, right-click on command line optiond. in the drop-down menu that appears, click on the "Run as Administrator" optione. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.f. in the command prompt window, type the command net user administrator / Active: Yes and press ENTER.g. close the elevated command prompt.h. log (in the Start Menu) and you will see your new administrator integrated next to your current account.i. click the photo icon display built-in Administrator account and connect to it.Step 2:If the problem happened not so long ago, you can perform a System Restore to the point that your computer was working fine.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
AP1131 - of-Authenticationing problem - problem users did not get the IP
Users connected to the AP1131G cannot get DHCP!
Hi all
I hope that we can find a solution for my problem.
I have access point AIR-AP1131G-E-K9 and connected to the switch 2960, under port configuration is:
interface F0/24
switchport mode access
switchport access vlan 63
switchport voice vlan 62
!
!
I configured on it two SSID, on for users and the other for the voice that is hidden.
The SSID security user.
but the voice SSID has no security restrictions.
(The main problem is any user to connect to AP1131G, he or she cannot get the IP via DHCP, but voice can get DHCP and connected normally)
-Configuring AP-
Admin-AP1 #sh run
Building configuration...
Current configuration: 2462 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname Admin-AP1
!
enable secret 5 iL05 $1$ $ CMki6n7Twwea0QLL58oCg0
!
No aaa new-model
!
resources policy
!
IP subnet zero
!
!
!
SSID dot11 HW-Admin-AP1
VLAN 63
open authentication
Comments-mode
MBSSID-guest mode
!
dot11 ssid voip
VLAN 62
open authentication
!
diet pre-standard trading online
!
!
123A0C041104 Cisco 7 password username
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
VLAN 63 key 1 size 40 bit 7 589074CFA6CD transmit encryption keys
encryption vlan 63 compulsory wep mode
!
VLAN 62 key 1 size 40 bit 7 76B3B1F212E9 transmit encryption keys
encryption vlan 62 mandatory wep mode
!
SSID HW-Admin-AP1
!
SSID voip
!
MBSSID
root of station-role
Bridge-Group 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface Dot11Radio0.62
encapsulation dot1Q 62
no ip route cache
no link-status of snmp trap
Bridge-group 62
Bridge-group subscriber-loop-control 62
Bridge-group 62 block-unknown-source
No source of bridge-group 62-learning
No bridge group 62 unicast-flooding
Bridge-group 62 covering people with reduced mobility
!
interface Dot11Radio0.63
encapsulation dot1Q 63
no ip route cache
no link-status of snmp trap
Bridge-group 63
Bridge-group subscriber-loop-control 63
Bridge-group 63 block-unknown-source
No source of bridge-group 63-learning
No bridge group 63 unicast-flooding
Bridge-group 63 covering people with reduced mobility
!
interface FastEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0.62
encapsulation dot1Q 62
no ip route cache
no link-status of snmp trap
Bridge-group 62
No source of bridge-group 62-learning
!
interface FastEthernet0.63
encapsulation dot1Q 63
no ip route cache
no link-status of snmp trap
Bridge-group 63
No source of bridge-group 63-learning
!
interface BVI1
IP 172.18.63.2 255.255.255.0
no ip route cache
!
default IP gateway - 172.18.63.1
IP http server
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
1 channel ip bridge
!
!
!
Line con 0
password 7 1101180B1632595C557A
line vty 0 4
password 7 09444F07182545425A5C
Synchronous recording
opening of session
!
end
-----------------------------------------------------
I would like to know what is the problem for my setup? If there is a problem?
I need to know why he doesn't connect as voice phones works normally and get IP via DHCP addresses.
I would like to mention here that the source DHCP for the two vlan is same source (Core) and here it is the configuration in this topic.
DHCP excluded-address IP 172.18.63.1 172.18.63.50
!
H-VLAN-wireless dhcp IP pool
network 172.18.63.0 255.255.255.0
DNS-server 172.18.11.16 172.18.11.18
domain hw.net
router by default - 172.18.63.1
!
pool IP dhcp H-VLAN-Users
network 172.18.61.0 255.255.255.0
router by default - 172.18.61.10
DNS-server 172.18.11.16 172.18.11.18
domain hw.net
-172.18.11.18 NetBIOS name server
!
!
----------------------------------------------------------
If anyone can help me how to troublehsoot this problem and how to determine the problem.
Hello
Change the Switchport Trunk conifig...
On the SWITCH
============
int fa 0/24
switchport trunk dot1Q encap
switchport mode trunk
switchiport trunk vlan native 63
No tap
end
Access point
=========
conf t
interface Dot11Radio0.63
63 native encapsulation dot1Q
Bridge-Group 1
end
conf t
int fa 0.63
dotQ native 63 encap
Bridge-Group 1
end
That will do it for you! Let me know if this answers your question!
Please do not forget to note the useful messages!
-
How to get the password of my computer
Hello. How can I get rid of someone's password on my computer they put when I try to download from store windows.
All help would be great.
Hello
We cannot help you to "crack" passwords, that includes your or other user password.
"What to do if you forget your password Windows 8/8.1"
http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8
If you have forgotten your Windows password, there are several ways to recover or reset:
If your PC is on a domain, your system administrator must reset your password.
If you use a Microsoft account, you can reset your password online. For more information, see the Web to reset your password page.
If you use a local account, use your index of password as a reminder.
If you've tried these suggestions and still unable to connect:
If you have Windows 8.1, you will need to reinstall Windows.
If you have Windows RT 8.1, you will need to contact the manufacturer of your PC.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Password information.
"How can I change my password?"
http://Windows.Microsoft.com/en-us/Windows/change-password
"Can I connect to Windows without a password?
http://Windows.Microsoft.com/en-us/Windows-8/disable-remove-password
" How to connect automatically to the user account at the start of Windows 8 and 8.1 "
http://www.eightforums.com/tutorials/2894-log-user-account-automatically-Windows-8-startup.html
"Passwords in Windows: FAQ".
http://Windows.Microsoft.com/en-us/Windows-8/passwords-in-Windows-8-FAQ
See you soon.
-
I am developing an application that has the following condition.
Requirement-
(1) my application needs to read the access code which the user has defined to unlock his iPhone.
(2) if the user has a password of speech recognition, I need to get audio of that too.
Question-
Is it possible to get the functionality above. If possible then how?
Think for a minute. Se * you * buy an app that could do?
-
Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.
I'm your pain ptapp!
Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.
All 4 of my devices constantly ask my password because of some problems with xyz account.
Then I enter the password only to be told that iCloud cannot check my password.
Then after several repetitions of this I get locked and have to go to the site apple id to change my password.
I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.
Apple needs to fix this problem, if they have any idea how to.
Maybe you are looking for
-
2007 accidentally uninstalled Office
Hello April 15, 2015 I accidentally uninstalled office 2007 instead of WPS Office 2013 Beta 3 and then I thought to download Office 2013 the trial. I installed but I find that after a few days, it becomes unlicensed and now I have cannotdo my work. O
-
Hello world Not sure if it is a real bug, but I have seen that he sent anywhere. I created a really basic LV class with members of private data and some data access screws when I renamed one of my data members then name didn't and don't get spread n
-
Look for a file "cpl" or "dll" does not have any similar name.
-
cord cable fiber type selection based on different types of SFP connectors?
need help with fiber patch cable cord type selection based on the different types of SFP connectors, y at - it links online or any documents that will be useful...
-
Hello Microsoft Editorial of the day I have little doubt that I ask that you help me please How to change the windows 8 pdf file and how to convert PDF to word document. And Am actually using windows 8 some tools of automation installed as (QTP & QC)