ACS - 5.3.0.40 - B.839
I am facing difficulties to understand the meaninig of the pair of attribute value I found in AAA TACAS authentication log.i came to know the format used in the log file but the attribute = value pairs are unclear for me.i try to search them, but I was able to find some not all in tne acs dictionary.if someone is having enough information about pls me know.here are some of the attributes
IP = a.b.c.d
username = xyz
Protocol = GANYMEDE
Request latency = 0
Network name = device router lab
Type = authentication
Action = login
privilege level = 1
Authentic-type = ASCII
Service = login
User = xyz
port = tty6
Remote address = v.x.y.z
Username = xyz
ACS Sessionid =
AuthenticationIdentityStore = internal users
Authentication method = PAP_ASCII
Acess selected service = Default Device Admin
Selected the shell = Enable profile
Identity group = all groups: zales_admin_user
I have attached the log file in which corressponds line first newspaper of authentication.
Thank you
Saurabh sharma
Hello
ip = address the ip address of the network device to which the user requests access to the a.b.c.d
username = xyz, the authentication request username
Protocol = Protocol Ganymede GANYMEDE
Request latency = 0 latency based on the timestamp of the event of authentication, and when he arrived at the ACS
Network name = device router lab name that has been configured in ACS
Type = authenticate user requests to authenticate
Action = login user will connect to the device
privilege level = 1 course priv authentication level
Authentic-type = ASCII ascii using PAP for authentication (typical for Ganymede)
Service = Service type is the login connection
User = xyz, it's the user name
port = tty6 port to which the user is connected to
Address = v.x.y.z remote, it's the ip address of the workstation user
Username = xyz new Username
ACS Sessionid = This is usually seen in radius, Ganymede unnecessary queries
AuthenticationIdentityStore = users internal identity store this ACS used to authenticate the end user
Authentication method = PAP_ASCII PAP/ASCII for the (common in GANYMEDE) authentication protocol
Acess selected service = Admin default device it's the selection rule of correspondence in ACS
Selected the shell = Enable profile is the shell profile configured GBA corresponding to the user cons
Identity group = all groups: zales_admin_user This is the identity corresponding to the user group.
As you can see that ACS uses a combination of the Ganymede av/pair with its own internal attributes that you can assign to the end user to make decisions. You can combine attributes such as the membership of the user group and the remote address to lock a user group authentication to devices of a particular workstation... for example.
Let me know if this helps you.
Tarik Admani
* Please note the useful messages *.
Tags: Cisco Security
Similar Questions
-
ACS 5.3 - change device group or location error
I am trying to move a device from the default location to a subgroup and get the following message when I try (be it with IE or Firefox)
This failure has occurred: Index: 0, size: 0. your changes have not been saved. Click OK to return to the list page.
It also gives me the same error if I try to change the default device for a subgroup. I don't know that I could do before. The construction of the ACS is (installing VMWARE):
Deploying applications engine Cisco OS version: 1.2
ADE-OS Build Version: 1.2.0.228
ADE-OS System Architecture: i386Copyright (c) 2005-2009 by Cisco Systems, Inc.
All rights reserved.
HostName: ACS1Version information for the installed applications
---------------------------------------------Cisco ACS VERSION INFORMATION
-----------------------------
Version: 5.3.0.40
The identifier for the internal version: B.839I'm he suspect a problem reading/writing with the database or a corruption of the database. Can someone enlighten me on how to fix it please?
I stopped and started the acs application via the console application status and see the acs has this to say about himself.
ACS1 / admin # display the status of the acs application
Role of the ACS: PRIMARY
Process of database ' ' running
'Management' running process
'Runtime' running process
"View-database" running process
"View-jobmanager' running process
"View-alertmanager' running process
"Notice-collector' running process
"View-logprocessor' running processMel
Does this happen to small number of network devices or the entire
If the former, then I found the following CDETS
CSCtw59271 Corruption of device random network after upgrade of ACS 5.2 to 5.3
Which includes the following workaround solution
Symptom 1: Remove and re-add the AAA client
Symptom 2: changing the secret shared GANYMEDE + of the network device, enter the same key again and save the network device.
> Use when GANYMEDE + has been used
There are a few important fixes related to the upgrade of issues in patch 5 and later versions for ACS 5.3. While they didn't wear on NDs, I recommend not to install this patch
-
ACS 5.3.0.40 patch install
Hi all
We have just upgarded our ACS environment to the latest patch
(5.3.0.40.8) between-5 and -8, it has not installed a patch as you can see below.
--> question: do we need (or recommended) to install all the patches, including the 6 and 7, or the will one covers all the patches?
See the version of the acs application
Cisco ACS VERSION INFORMATION
-----------------------------
Version: 5.3.0.40.8
The identifier for the internal version: B.839
Patches:
5-3-0-40-1
5-3-0-40-2
5-3-0-40-3
5-3-0-40-5
5-3-0-40-8
Thank you
Stefan
Hello Stefan,
These hotfixes are cumulative. Each path includes all the fixes that were included in previous patches for the version.
This information comes from the release notes:
This is a patch for the ACS 5.3.0.40 version. ACS 5.3.0.40 must be installed before you install this hotfix. So the answer is that you need not install the patches of 6/7.
Please evaluate the useful messages
Best regards
Eugene
-
upgrade ACS 5.3 5.4 fails
Hello
I try ACS 5.3.0.40 update to the new version 5.4.0.46. Everything looks ok:
ACS-machine / acsadmin # application upgrade ACS_5.4.0.46.tar.gz rep01
You want to save the current configuration? (yes/no) [Yes]?
Building configuration...
Save the configuration running at startup
Application of % CARS installation required post installation reboot...
Broadcast from root (pts/0) message (Thu Dec 6 23:36:41 2012):
The system is down for reboot NOW!
Successful application update
But the ACS (vmware instance) machine cannot be started with this result: Volume group 'smosvg' not found. (see attachment for details)
Any ideas?
--
Martin
Have you installed patch 8 on the 5.3.0.40 before moving to 5.4?
Maybe you run in CSCuc93106...
Edit:
Ehhmm... unlikely.
-
Where can I get a license for ACS 5.8?
An evaluation license is available?
Hi Bill,
You can get a 90 days trial license provided you have a valid contract and the device SN.
Concerning
Dinesh MoudgilPS Please rate helpful messages.
-
License of ACS problem please help me
Hi all
I have download ACS v5.6.0.22 and I install in ESXI, but when I search evaluation site license
'tools.cisco.com/SWIFT/LicensingUI/Quickstart '.
I have download this license, but does not work is for 4 CiscoACS I can't find ACS v5 license. 6 in the Web site. Please can someone
Help me
Hello
Could you please try install the attached license file and let me know.
Concerning
Gagan
-
How can I get a trial version of cisco ACS 5.4
Hi guys:
I would get a trial version of GBA 5.4 for educational purposes (certification LAB). I know that it is possible to download the ISO file of www.cisco.com, but when a try to download the file with my cisco CCO get a message asking me "an additional fee required. Do you know how can I get this software?
PD: I was able to download a trial of this software (file *.lic) license, but I want to install the ACS in a VMWARE server and play with him. I need the ISO file.
Thank you very much for your help
Kind regards.
Martin
CCNA-CCNP-CCGD
Certified Engineer
Cisco limited offer of trial copies of some of its products. Those that are linked from here:
http://www.Cisco.com/go/nmsevals
In General, if it is not there, it is not available as a trial version. It is usually not Cisco policy to provide all the software trial for teaching and laboratory use.
If you are working with a Cisco or a partner account manager, you will get an exception on a case-by-case basis.
-
WLC 4402 impossible to authenticate correctly with ACS 5.2
For some reason, I can't WLC to authenticate correctly with ACS 5.2. It's very strange in the sense that when I checked the log. ACS authenticates and authorizes the WLC 4402, but I can't log on the WLC. login screen appears, if I typed the username that he jumped
Controller of >
user:
password:
No matter what I typed (internal or external users), nothing seems to work.
It comes to my frustration, I have no problem with authentication of routers and switches except WLC 4402.
Hello
Please delete privilege on the ACS level settings.
Elements of strategy > authorization and permissions > peripheral Administration > Shell profiles > common tasks
By default the privilege - do not use.
Maximum privilege - not in use
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages
-
Authentication PEAP with Cisco ACS 5.3 and Lotus Notes DB
Hello
I want to authenticate clients wireless against the name of user/passwords stored in a lotus notes database.
Network: PEAP SSID-> Accesspoint-> controller-> ACS 5.3 WLAN 4404-> Notes DB
Is this possible?
I can connect to the attributes and ldap groups and query. but when I try to authenticate a user, I always get an error "object not found in the identity store.
Bind test succeeds (> 100 groups and > 100 subjects.)
EAP MSCHAP v2 is not taken in charge with LDAP by ACS
You can use EAP GTC
You should a begging utility that supports PEAP (EAP-GTC)
such as ADU, Intel Proset, CSSC Cisco AnyConnect,... you can google for a list of applicants
Open the new thread for cause of Apple
------------------------------------------------------------------
Be sure to note the correct answers and report this thread as answered
-
Several downloadable ACLs by ACS user group
It is possible to map several downloadable ACLs to a single user or group of users use ASA and ACS?
For example, you have an ACL controlling access to servers (ACL A) and another ACL (ACL B) internet access. Is it possible to assign several ACL to a group of users, such as user group can only access the servers, while the user group B can access servers and internet (ACL A + B ACL)?
Thank you and best regards.
George,
The user and group settings only would allow you to select only a single instance of DACL list at once.
Kind regards
Jousset
The rate of useful messages-
-
reset the password of a VM ACS console
Someone knows how to do this?
-anne
Boot from the installation of ACS disc, and it will be an option to reset the password of admin console
-
ACS 5.1.0.44 GUI connection failed!
Dear guys,
I'm trying to configure Cisco ACS (5.1.0.44) to the VMware Workstation in order to test/study. Installation went well. I can connect via SSH, but the failure of the connection of GUI with the same credentials. Please find the attached images.
Any help will be very appreciated!
_______________________________________________
Connect as: admin
Keyboard-interactive authentication.
Password:
Last login: kills Oct 30 17:31:24 2012
ACS - LAB / admin # show running-config
Building configuration...
!
ACS - LAB host name
!
IP - testlab domain name
!
interface GigabitEthernet 0
IP 10.10.10.50 255.255.255.0
!
8.8.8.8 IP name-server
!
default IP gateway - 10.10.10.254
!
time zone UTC
!
!
user name, password hash $1$ HRi10i.R admin $LHqyKJWVqDxfrcmaWGPOM1 admin role
!
Service sshd
!
password policy
Lower-box-required
Upper-case-required
numbers required
No - username
Disable-cisco-passwords
length-password - 6 min
!
exploitation forest localhost
exploitation forest loglevel 6
!
CDP timer 60
180 CDP hold time
CDP run GigabitEthernet 0
!
ICMP echo on
!
ACS - LAB / admin #.
__________________________________________________________________________-
Thank you.
Hello
The first time you access the GUI of the ACS, you need to use the default credentials:
Username: acsadmin
Password: default
After that the server will ask you to change the password. Please try it and let me know how it goes.
-
Question of VPN &; ACS
Hello
It's maybe a stupid question, but I need to learn more about security issues, so here's my question: If the remote end users can access their corporate network via secure VPN, then why do need ACS solution? Thank you to educate me.
My examples are not too clear. You are right in that you can provide access to the server to your VPN users through AAA filters for the VPN concentrator.
In the environment where I work, we also use ACS to authenticate wireless users AS5300 dial-up users and access to our routers and switches.
Here is a link that I hope this explains a bit more clear:
HTH
Steve
-
Hello
in fact I use ACS 5.8 as NPS server to my computer by using the certificate issued by AD CS. so I need to know what protocols allowed that must be activated on my ACS allowing the OmniPass computer through PEAP-TLS
Thank you.
Yes, you must select MSCHAPv2 as internal method for PEAP-MSCHAPv2.
Concerning
Gagan
PS: rates as correct if this can help!
-
Problem with ACS 4.2 database replication
Greetings,
I'm not able to replicate data between two ACS SE 4.2. I get the following error:
Inbound replication of database of ACS 'ACS_BEX_001' denied - shared secret mismatch.
Apparently, the configuration is ok. I enclose the configuration of these two ACS.
Hello
The problem you see are because of the Self entered on each ACS is set to 127.0.0.1. For replication to work, you must set all 4 entries of ACS at the same shared secret, even the self ones. The problem is when you try to change these entries, it will tell you that you can't use 127.0.0.1, but it also won't let you change the ip address.
The bug Id for this problem is CSCso36620. Workaround declares that the CLI, you can use the "set ip" command to put the IP address in the initial INVESTIGATION period and it should update the self entry in the GUI. At this point, you should be able to update the secret shared on all 4 devices.
Let me know if you have problems to make it work.
Thank you
Nevin
Maybe you are looking for
-
It's more a coup to face a request (even if it's indirectly) The algorithm of color is what iTunes does stand out from other music libraries. That's what throws us in the future. That's what made my whole IMMERSIVE music experience. I was friggin im
-
Driver for Portege 750 M - Advanced features of the touchpad
I just updated my Portege 750 M to Win7 and it was clean. The problem is that since it uses the generic driver for the touchpad, there appear to be no control to stop the accidental clicks. As I used to accidentally pressed the button when entering,
-
I bought a mini iPad 4 than does ' t have FaceTime. How do I get this resolved.
iPad Mini 4 does ' t have Facetime, how do I get this resolved. iPad Mini - 4 16 GB WiFi only iOS - 9.2 I bought this iPad in SAUDI ARABIA,
-
Hi, I have a laptop hp compaq nx 7300 GB935ES I would like to know the the maximum amount of RAM taken in charge by the motherboard of my laptop. Can you help me? Thank you P.S. This thread has been moved from Community Feedback & Suggestions for lap
-
Screen saver shows photos in black and white
I have my screensaver set to display the photos in Windows Live Photo Gallery. It will work just great... then all of a sudden the images change color in black and white. Can't understand why. Any help will be appreciated.