ACS 5.3 group license access system security

Similar Questions

• Local access only after the Network Systems Security 2009 malware removed

  I'll try to put all the details that I can here, but my laptop that has the problem cannot connect to the Internet so I won't be able to copy paste n info. Last week, I was struck with the 2009 malware security systems. It was a pain to remove because it stopped all the work programmes and I could not install malware removal software. Finally beat him by renaming the main program folder 2009 for the security of the systems. That he has stopped working when I restarted the laptop and then I was able to install the malware removal software and took remoped.

  Here is the problem. Now that he is gone my network connections wireless and wired no longer work. I get local access only on an unidentified network. I have Windows vista Home premium and use internet with a modem model Cableone cable Motorola Surfboard SB5101.

  Then I called a cable tech support first and they could not help and after all the service works very well on my desktop the same modem and connection. So I called Motorola tech support and they had me do a lot of things for hours (including reinstalling the drivers for the modem) on the phone without effect. Finally, they suggested that I have re-download all ACER Aspirion z9410z drivers and reinstall them. So I did it. Copied to a flash of my desktop drive and reinstalled them. No luck.

  The respectable and sharing Centre, explains that the modem works correctly when you look at the status. But the auto for windows diagnostic tool says to check the IP settings automatically and reset the network card. The two fail to trouble when ran. Here are all the parameters of the network connection.

  Physical address: 00-1A - 66 - AA - 64cB
  Active Yes DHCP
  Autoconfiguration IPV4 address 169.254.195.250
  IPv4 mask subnet 255.255.0.0
  Net Bios on active TCP/IP Yes
  Link-local IPV6 address fe80::1878:12 d 5: a566:c3fa % 36
  Servers of DNS IPv6 fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
                                                  
  IPv4 and 6 are defined automatically detect the IP address and the DNS.

  Hope that gives enough information. There no mater if I use eithernet and USB to connect or wireless. I have the same problems.

  Another thing that can be part of the problem.

  It started after removing the systems security 2009 malware as well.

  When loggin, turned off the laptop, a blue error screen appears. Here are the details generated for it. I'm working on the research of which the question is to be set by the online search.

  Event name BlueScreen
  OS version 6.0.6000.2.0.0.768.3
  local ID 1033
  BCCODE one
  BCP1 00000016
  BCP2 0000001 B
  BCP3 00000000
  BCP4 82028768
  OS version 6_0_6000
  Service Pack 0_0
  product 768_1

  I hope I will get this fix as well.

  Any help will be greatly apprieciated. If more information is required only, let me know and I'll get it.

  Thank you all.
  Jason

  Hello Oxilas,

  I suggest that you use a friend/co-worker Vista DVD and do a repair installation.

  Repair facility:

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this still does not resolve all problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) (if this is not successful.)

  <><><><><><><><><><><><>

  Please make sure that you back up all the important data before you continue. Please visit: methods for your backup files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: System security 2009 installed automatically

  http://nonbaohiem.Asia/content/mubaohiem.html

  In my laptop computer virus displays alert wallpaper and system security 2009 installed automatically.

  Display of security 2009 system that my laptop is infected by virus it ask me to scan after scan showing many viruses.
  When I try to clean all viruses it asks me to activate the security system 2009.

  I use Mcafee anti-virus he caught a virus Trojan Fake.
  Now also infected macfee. Scan has been automatically disabled access.

  Hello

  I advise you to download and install another Antivirus such as Kaspersky or Nod32. Make a full system scan and remove viruses, Trojans from your computer. I could not open the link you placed http://nonbaohiem.asia/content/virus.JPG but, I guess that it is infected

  Post edited by: Jeka-HE

• Access local security policy in Windows 7 Home Premium

  How can I access local security policies in Windows 7 Home Edition Premium, it is even available in this version?  My default account is an administrator account, but there is still so much that I get ACCESS DENIED errors on. The UAC is low in this version and really doesn't help at all. Am I missing something obvious here?

  (Panel of-> system and security-> administrative tools):

  You should see him there. When you get that access denied and click right on that never - what gives you that and see if there is an option that says run as long as administrator, and then run, as the value default windows 7 Administrator account disable but associated with the admin user.

• Cod signed fails on the device with the attempts to access a secure API

  Feature: "BOLD"

  JDE: Eclipse (3.4.1) plugin (1.0.0.67) w/component pack 4.6.0.19

  JDK: 1.5

  Last week, I built and signed myApp. It loaded and run correctly on the device. This week changes have been made to the code, recompiled, signed and redeployed. Now, we get the attempts to reach an eveytime failure secure API that the code is executed. The secure API is PersistentObject and was last week.

  My last attempt, I deleted physically files .alx and .cod, .jar, .jad, .csl, .cso files prior to construction. I have verfied the 352 KB .cod size after compilation and 356 Ko after the signing. All of the code in the signature tool reflects signed. I even removed the .cod from the server where it is deployed and verified that everything is signed. We use the loader of office right now to load the code on the phone.

  EventLog

  S Java Exception - RuntimeException

  | Error at startup myApp:Module "myMod" trying to access a secure API.

  a system - error myApp:Module "myMod" from trying to access a secure API.

  a system - the linker error: "VerifyError" for myApp

  a system - Module 'myMod' attempts to access a secure API.

  a system - module 6803 cannot refer to net.rim.device.api.system.PersistentObject

  a system - VM:LINK myApp

  a system - CMM: myApp (6803) No sig 0 x 33

  a system - the linker error: "VerifyError" for myApp

  a system - Module 'myMod' attempts to access a secure API.

  a system - module 6803 cannot refer to net.rim.device.api.system.PersistentObject

  a system - CMM: myApp (6803) No sig 0 x 545252

  a system - VM:LINK myApp

  I never saw this when the cod file has actually been signed.  You can try to use javaloader to get cod off the coast of the unit and compare it with your signature.  Just a thought.

• Error: Attempt to access a secure API

  Hello

  I have a request, but when I run the application in the device, I get the following message:

  Error starting BBPlusSDKTest: module 'BBPlusSDK' trying to access a secure API

  the BBPlusSDK is a JAR file, and the BBPlusSDKTest is my main program.

  Inside my main program (BBPlusSDKTest). Apply an 'import' in the jar (BBPlusSDK).

  Initially, had problems with the Key RRT for the file BBPlusSDKTest.cod , but already completed the signing of this file.

  But now it shows another error message (trying to access a secure API).

  I use the tools following and device:

  (1) terminal Blackberry 8320

  (2) blackBerry JDE 4.5.0

  (3) Java JDK 1.6.0_14

  And also I read a few similar cases in the forum, but none of this has solved my problem.

  could someone help me with this problem.

  Kind regards

  I run the file of cod of the library with the signature tool.
  And is displayed with the status "signed".

  so, I have to sign another cod file. but still the error persists.

  by chance, the BlackBerry does not support this level of security of the operating system type?

  Kind regards

• New for mapping SSL VPN ACS ASA - ASA groups

  Greetings,

  I am new to ASA, so any help is greatly appreciated.

  I just installed and installed an ASA 5520. I installed an SSL VPN. What I'm trying to achieve is to configure profiles of different groups and different users can access various resources when they access the VPN.

  Current config-

  ASA 5520 v8.3

  ACS 4.0

  Field of Windwos 2003

  I have different installation profiles in the ASA. (i.e. business Dept.) When I choose in the drop down menu, it allows me to open a session and displays the options I've chosen for this group. The problem is that I can connect in this group with any account. GBA, all windows domain users are in the default group. I guess the default group is being processed and which has hosted and user logon.

  Can anyone provide a good article or tips on how to configure the ASA and the ACS for several groups of users. We have several departments that will have to get the parameters when they connect. The ACS groups are mapped to the Windows groups that correspond to each Department

  Any help is greatly appreciated.

  Thank you

  Tim

  Hello

  I think that you need to activate locking group.

  In order to configure Group locking, send group policy name in the attribute class 25 on the Authentication Dial - In User Service (RADIUS Remote) server and choose the group to lock the user in policy.  For example, to lock the user 123 of Cisco in the RemoteGroup group, define the class of attributes 25 Internet Engineering Task Force (IETF) UO = RemotePolicy; for this user on the RADIUS server.

• ASA 5510 w / license more lost security contexts

  I have an ASA 5510 with license more than security and when I looked the devices a few days ago, I had 2 contexts, however after you have configured the port of Mgm as a regular port contexts show 0, why?  I can't find anywhere on the internet where this problem occurred: this is the result of show worm:

  Cisco Adaptive Security Appliance Software Version 7.0 (8)

  Updated Sunday, 31 May 08 23:48 by manufacturers

  System image file is "disk0: / asa708 - k8.bin.

  The configuration file to the startup was "startup-config '.

  SHIELDASA01 up to 21 hours 16 minutes

  Material: ASA5510, 256 MB of RAM, processor Pentium 4 Celeron 1600 MHz

  Internal ATA Compact Flash, 256 MB

  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  Start firmware: CNlite-MC-Boot-Cisco - 1.2

  SSL/IKE firmware: CNlite-MC-IPSEC-Admin - 3.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

  0: Ext: Ethernet0/0: the address is 0021.a025.2d3c, irq 9

  1: Ext: Ethernet0/1: the address is 0021.a025.2d3d, irq 9

  2: Ext: Ethernet0/2: the address is 0021.a025.2d3e, irq 9

  3: Ext: Ethernet0/3: the address is 0021.a025.2d3f, irq 9

  4: Ext: Management0/0: the address is 0021.a025.2d3b, irq 11

  5: Int: not used: irq 11

  6: Int: not used: irq 5

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 25

  Internal hosts: unlimited

  Failover: Active / standby

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  VPN peers: 150

  This platform includes an ASA 5510 Security Plus license.

  I'm not showing the serial number and keys licese for obivious reasons.  Any help? Thanks in advance.

  You might want to try upgrading your IOS on the SAA, see if it can help, can you check the firewall mode (single or multiple) you're currently on? is your asa transparant or routed?

• I have an error code: sec_error_untrusted_cert when I try to access my secure school Web site

  I have an error code: sec_error_untrusted_cert when I try to access my secure school https://my.saintleo.edu/Web site. I run Firefox 32.0. When I have this error, it will not even let me add the exception, because it is "grayed out." Please I need help.
  Thank you

  Hello regba123, can you try to reset the file cert8.db in your profile folder, as described in "this connection is untrusted" error message - what to do?

• Says I don't have permission by trying to access a secure site, but can using windows Explorer

  While trying to access a secure site when I enter the password, I get (you are not allowed to message).

  I have reset my password. Without success. Contacted directly the password manager and reset the site with their help. Without success although they may open the site with my password. The site manager told me to contact you guys because there with Mozzilla Firefox.

  Tried to use Windows Internet Explorer without any problem.

  See also:

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

• Can not access the security settings

  Hello

  I don't have a password on my computer since I don't don't need one. And in the past, I was able to enter the security settings and allow installation of non-apple software, leaving the field blank password and unlock the feature by pressing return.

  I wonder now a password that I don't have, and if I had, I must have forgotten. I don't know what to do to get into the security settings.

  Your help is greatly appreciated.

  Faurie

  Well - I found the answer to my own question.

  It seems - so that you cannot use a password to connect to your computer, that when you want to deal with the security settings, the computer expects that you must have a password. In other words: you can not have a password.

  I solved my problem by creating a password, then use it, and I was able to access the security settings and do what I had to.

  Thanks to me.

• I am trying to access the security settings in my Apple ID, but due to too many attempts to answer my questions of security, this option is blocked. How can I unlock it?

  I am trying to access the security settings in my Apple ID, but due to too many failed attempts to answer my questions of security, this option is blocked. How can I unlock it?

  You can see this page if your identifier Apple is locked to see how to solve this problem.

  https://support.Apple.com/en-us/HT204106

  If you cannot solve this way, please contact support at the link below!

  https://getsupport.Apple.com/

• Error startup Module attempts to access a secure API

  I had all three keys to blackbeery site and I managed to import them in eclipse...

  But when I run the application in the device. His displays this "Error Starting Module attempts to access a secure API".

  Can someone suggest how to solve this problem. Please help me for this. Thanks in advance.

  sign the application

• Error starting "appName": Module "appName" is trying to access a secure API

  Dear all,

  I downloaded a few applications in the app world. When I try to install on the device, there is an error "error starting Sunfish6: Module 'Sunfish6' trying to access a secure API. I tried to update the files, he needs, but still get the same error message. What is the cause of the appearance of the error message? I developed this application using phonegap and blackberry webwork framework.

  Thanks & best regards.

  In the eclipse webworks menu, select project-> BlackBerry-> sign with Signature tool.

  Then upload the generated files.

• Application module tries to access the secure API

  Hi all.

  We are new to Blackberry Java development and have some problems with it.

  We use the same BlackBerry Bold 9000 and OS worm Simulator. 5.0 in Eclipse JDE.

  The JDE version is 5.0.0

  We signed HelloWorldDemo with tool of power, provided by BB. It worked fine on the Simulator AND the device.

  Then we signed our own application, based on PictureScrollFieldDemo.

  The thing is, on the simulator of OUR application works fine, but when we try to run on the device, it failed with an error that says something like this: "Application module tries to access the secure API."

  After that many times we tried to remove the code all potentially dangerous and recompile the application. After that it stopped working at all (when you click on the application menu, ABSOLUTELY nothing happens).

  Then, we decided to try to launch PictureScrollFieldDemo, the sample provided by BlackBerry. Also, it did not work

  Finally, the HelloWorldDemo has stopped working or the other...

  During all this madness, we rebooted the unit several times.

  Please help, appreciate any advice.

  Thanks in advance, geezmo.

  You should have received 3 keys, RBB, CPR and RRT. You imported all 3 when you have been setting up the signature tool?