ACS - the configuration list

Similar Questions

• How to disable the configuration of Release64

  Is there a way to disable exit 64 configuration from the configuration list?

  The dialog box generate to remember all of the configurations that have been selected to the last time you used it. This information is saved in the workspace file. So if you always want to build the same configurations, you might put back them once, manually, and then you wouldn't have to worry about this when you run the automation program.

  Luis

• Have ACS pass the access list by user or group for Cisco 2600

  I wonder how I can configure ACS to when a user connects a router and authenticates to ACS, ACS pass back have an access to the router list based on user or group?

  With GANYMEDE, like this:

  http://www.Cisco.com/en/us/Tech/tk583/TK642/technologies_configuration_example09186a0080094656.shtml

  With RADIUS, like this:

  http://www.Cisco.com/en/us/Tech/tk583/tk547/technologies_tech_note09186a0080094032.shtml

• Connection 12:00 ACS DNS configuration does not resolve the address

  Hello

  I'm trying to configure the ACS with AD in the identity store but spin the question.

  I enter the AD domain name and the user name and the password and click on the button "Test connection" and receive a DNS error indicating that he "cannot resolve network address.

  I connected to the CLI and test from there domain name and it works very well.

  I am confused any help would be grateful.

  Thank you.

  Hi André,.

  In the configuration of Active Directory, make sure that you have entered the full domain name. With this access to the ACS through SSH connection and make sure the time zone and the time the GBA and the AD is the same thing and make sure that the ntp server are configured on the CLI of ACS.

  Here are the steps to do:

  Step 1: Set the time on the ACS corresponding to AD. Type the command "clock {game} [month day hh:min:ss yyyy]."

  Step 2: Configure the time zone. Type the command in the configuration mode ' clock timezone (timezone).

  Step 3: Configure the ntp server. Type "ntp server (address IP/hostname).

  Kind regards

  Kush

• Add the table list does not view database in Configuration Manager

  Hello
  
  I try to add a view of database in the configuration table tab manager. The display does not appear in the list of tables available in WCM 11.1.1.6 version. This is possible in the 11.1.1.4 version. Anyone else facing this problem?
  
  Thank you
  Soumya

  Soumya salvation,

  I think that this can be resolved with EBRIncludeViewsInTableList = true set in config.cfg to the server of the University Complutense of MADRID.

  The recent MLR 12 also has the fix to display views of DB tab Table of the WCC.

  Thank you
  Srinath

• ACS - 4.1 - does not display Radius (Nortel) in the configuration of the Interface

  We have a GBA running on Windows we can see the Radius (Nortel) option in the Configuration of the Interface.

  Anyone deal with this issue?

  It's probably because you don't have any AAA devices configured for RADIUS (Nortel). IF you set one, it will appear in the configuration of the interface

  Nicolas

  ===

  Remember responses of the rate that you find useful

• Whitelist for the installation of the grey list

  I tried to follow the instructions in the manual of the Apple server to add servers to the white list for not beeing grey listed, but I can't make it work.

  Followed the following steps:

  Add servers known to a whitelist

  When you create a whitelist, you list of servers that are known good servers.

  1. Create a text file:touch host-whitelist.txt
  2. Change the text file:vi host-whitelist.txt
  3. Add the following three lines, replacing the name on the third line with the name of the mail server you want to whitelist:
  4. mail:command = writeSettings
  5. mail:skipReadSettings = yes
  6. mail:configuration:postfix:host_whitelist:_array_index:0 = "goodMailServer"
  7. Load these settings in serveradmin:sudo serveradmin command < host-whitelist.txt

  The host file - whitelist.txt have I put in place since then multiply the servers like this:

  command: mail = writeSettings

  mail: skipReadSettings = yes

  e-mail: configuration: postfix: host_whitelist:_array_index:0 = 'Server1 '.

  e-mail: configuration: postfix: host_whitelist:_array_index:1 = 'Server2 '.

  e-mail: configuration: postfix: host_whitelist:_array_index:2 = 'server' 3

  e-mail: configuration: postfix: host_whitelist:_array_index:3 = 'server' 4

  e-mail: configuration: postfix: host_whitelist:_array_index:4 = 'Server5 '.

  When I execute thesudo serveradmin command < host-whitelist.txt do I get the following error:  command must be of the form 'serveradmin command service:command = command_name'

  Do I did wrong here?

  Certainly, you have an error in your command line entry, or host - whitelist.txt is empty.

• How do I keep everything: the configuration settings for update firefox?

  Really appreciate all the hard work of creating updates, but every time I update I lose my remarks: the configuration parameters, especially the browser.tab that I trust. Specifically, I use the default on InsertRelatedAfterCurrent and all the ones warning settings. (I don't want to be notified). I also use the tabs on the background plugin which needs to be reinstalled after major updates. I run Firefox at least 4 separate machines is a pretty huge headache of having to reconfigure after each update. Is there a way to tell Firefox to date but only change my settings back to the defaults?

  Thanks for a great browser.

  These settings should not be lost...

  Is it possible that you used refresh? Sometimes after an update installs Firefox displays a message that it runs very slowly and you can improve performance by restoring the default settings. Running the update function, which is your default settings and delete all your extensions (those you have installed in Firefox yourself, not those that have been added by other software on your system). The telltale sign is that an old Firefox data file appears on your desktop with the 'old' settings folder inside. If you have experienced this on several occasions, there may be several former folders inside. What is the explanation?

  You can create a backup of your prefs.js file that stores your Firefox preferences updated, before your next update. You can find this file in the folder of the settings (profile) currently active Firefox as follows (either):

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Scroll down and make a copy of prefs.js (or he can watch prefs and a JScript file type) in a safe place such as your documents folder.

• Synchronization of the configuration shows two buttons

  I have correctly set up Firefox Sync and used Firefox for a while successfully Sync in the PC Windows standard user on 3 computers accounts. However, when I tried to sync the administrative account on a computer, I was unable to. Since then, whenever I'm doing a tools/configuration synchronization, or Tools/Options/synchronization on all my computers, only two buttons to the top: "Create a new account" and "I have an account". There is no button 'Manage account', not related to Unlink this computer from Sync, nothing. I tried all kinds of things and I looked a long time for help on this problem and have not found something to help. If I delete my account just to start and complete synchronization, it will work, or could I be causing other problems by doing this? Any other suggestions? Thank you.

  What do you see in the list of menu drop-down menu button Firefox?

  Is - this set up sync or synchronize now?

  If you have 'Set up sync' then you seem to have lost the configuration of the synchronization and you will have to redo the set up Sync.
  
  If this is not possible, then try to delete (or rename) the armor in the Firefox profile folder file and reset synchronization preferences on the topic: config page.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  You can open the topic: config page through the address bar and to search for the prefs that begin with services.sync and reset set user prefs ("BOLD") through the context menu on the default value.

  If it still fails, then you can try a new profile.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• "back" button does not return me to the area I have left in the search list

  I use version 7.0.1 of Firefox on a laptop with XP SP3. All known updates have been applied.

  I use google to search for a topic and a list of results from site. After selecting one of the conclusions, I click on the back button, I went back to the list, but my 'space' in the list does not exist and I have to look through the list to see where I was while I can click on the following entry to find.

  I don't think that something has changed in this regard in a long time for the research.

  What I would say is that you're doing the research itself open in a new tab, and each of the search results open in new tabs in this way you know when you are finished using a tab, and you will not lose your place in the search results.

  Use the keyboard shortcut to open the results of a search in a new tab in the background, so that you can keep looking at Google results before looking at the tabs you open from the research.

  Google options (gear) at the top right, and then down 'search settings ':

  [x] search results open in a new browser window.

  Firefox tools > Options > tabs

  [x] open new windows in a new tab instead.

  Then, in Subject: config (typed in the address bar)

  Browser.Search.openintab user set to true

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  More information about the configuration variables available in
  topic: config entries and for users who do not know the process, there is Subject: config (how to change).

  From a Google search, you should have the pages open in a different tab, but with Google that is not good enough, because they have open all in the same tab, as you have noticed if you have done this.

  • Find and replace special shortcuts for Firefox users
    http://dmcritchie.MVPs.org/Firefox/search.htm

  You can use Ctrl + click or Ctrl + Shift + click to open a link in a new tab.

  • Firefox and other shortcuts of the browser (comparison table)
    http://dmcritchie.MVPs.org/Firefox/keyboard.htm

  You can use app-tab to pin the tab, click the tab and choose pin - tab and conversely to unpin tab or remove the tab when finished.

  You will find interesting reading of the tabs in

  • Navigation tabs in Firefox
    http://dmcritchie.MVPs.org/Firefox/tabs.htm
  • Configuration of the tabs, extracted about: config entries - MozillaZine Knowledge Base
    http://dmcritchie.MVPs.org/Firefox/tabs_config.htm
  • 001 ability Test tab
    http://dmcritchie.MVPs.org/Firefox/tab_capacity/001_with_underscore.htm##
  • Colors tab highlighting active/read/not read (Fx3.6) - themes and skins for browser - userstyles.org
    in fact colors all borders not only a feature of underscore - see photo in the minimum size bar tabs
    http://userstyles.org/styles/24728
  • Tabs, enlarge the list-all-tabs button - themes and Skins for browser - userstyles.org
  
  http://userstyles.org/styles/18553
• Minimum size of tab bar - themes and skins for browser - userstyles.org
  http://userstyles.org/styles/9043

• Can not change the configuration extreme airport

  Hello everyone, the community can maybe help me.

  I am a long-time Apple guy and can usually solve my own problems, but this one left me speechless. I have an Airport Extreme ages of less than 1 year. I set up OK and used for the last year. Now, I want to change the configuration. Specifically I add a port to the front, but I also had this problem, try to change the MAC address access lists, changing the wireless channel, allowing access as a guest, and probably any other change in config I try.

  Anyway, once I made the change, not restarting airport but then it fails to return to the top. The yellow light comes on and sometimes the utility Airport told me that he was unable to update the config. In this State I have to pull the plug to restart and once I did, the airport is back re-run without the changes I had made.

  It doesn't matter if I use the Airport 6.3.6 on El Capitan utility or Airport utility on iOS 9.2. The result is always the same. No change, fails to return to the top.

  I did a soft reset a hard reset and a factory reset. I've reconfigured from scratch (several times) and still can't seem to take a successful configuration change. I'm at the end of the ideas. I plan to return it because it's the year is February 2, but I don't want to go through the hassle if I can fix it myself or if it is a known problem that will not change with a change of equipment.

  In any case, here is specific information on the version by any chance, anyone else had this problem or knows a fix:

  Airport Extreme 802.11ac (ME918LL/A)

  Mac OS X 10.11.2

  Airport Utility 6.3.6

  iOS 9.2

  The actual configuration is crucial here.

  We need to know what is the brand and model of the modem?

  Some cable modems are at the origin of the terrible problems... especially the SB series cable modem.

  We should also see some screenshots of your configuration... Summary tab and network...

  We can work from there.

• Type & Extension in the configuration window

  Hello, I have a small question.

  On the configuration window listed in this thread

  for the tab type & extension,.

  I was wondering if they mean by type of data, and if so,

  where could I go and look for these abbreviations or icon?

  I could see that some are CNU, OCT and f and etc...

  Thank you.

  Hello

  Good quesitons. But let me a little bit correct.

  It is ENU, OCT and f and etc...

  Also, please get the reference of any attached list.

  Thank you.

  -Chris

• How to synchronize the start of IT and relaxation the Scan list (DAQmx Switch)

  Hello

  I want to measure samples of N to the AI0 of Council NI PXI 4461. The measurement starts on a rising edge of a digital triggering provided to the PFI0 of the same Board. The measure is configured with samples of N/2 pretrigged. So far, everything is under control...

  Using an NI PXI 2567 Board, the signal applied at the entrance the 4461 (AI0) switches between a V2 and V1 signal. I would like to synchronize the switch between the two signals with the trigger signal applied to the input of the PFI0 Governing Council 4461. In order to obtain samples of N/2 of V1 and V2 samples N/2. Synchronization of 1 to 5 ms would suffice!

  My question is how to synchronize the start of acquisition of AI pretrigged of 4461 with the switch control given by the Council of 2567?

  Thank you in advance for your help...

  PS: the configuration of the system is:

  -LabView 8.5

  -Chassis PXI-1044

  PXI-4461 on slot 2

  Module 4-slot PXI-2567

  Hi Frederic,.

  I came back to this recently and used the following examples to run the desired synchronization.

  PXI-4461: Acq & graph tension-Int Clk - dig Start & Ref .vi

  Samples per channel = 1000

  Rate (Hz) = 10000.00

  Start the trigger Source = / [name of the instrument DAQmx] / PXI_Trig0

  Onboard start = fall

  Reference Source Trigger = DAQmx Device Name] / PXI_Trig0

  Reference edge = fall

  Trigger samples = Variable (100, 500, 900)

  PXI-2567: Switch Scaning-SW Trigger.vi

  Advance the output terminal full = / [name of the instrument DAQmx] / PXI_Trig0

  Scan list = / [name of the instrument DAQmx] / ch0-> com0.

  Scan list = / [name of the instrument DAQmx] / ch1-> com1;

  Hardware configuration:

  The PXI-2567 module controls an external relay that switches between the voltage of 5 V on ch0 and ch1 0 V.

  The PXI-4461 connects to the COM of the external relay and therefore reads 5V when ch0 is connected; 0 v when ch1 is connected.

  Procedure: The above examples are used in the following procedure.

  1. run the PXI-4461 VI.  A start trigger (falling edge) is necessary to start collecting samples before firing.

  2. launch the module, PXI - 2567 VI.  When ch0 is initially (and immediately) on com0, a trigger is sent to PXI_Trig0.  The PXI-4461 will begin to acquire samples before firing.

  3. - click on the "Connect to the next" button on the front of the PXI - 2567 VI module.  This sends a trigger to entry software for the PXI-2567 module and the transitions of the scan for ch1-> com1 list.  Once the PXI-2567 module remains (debounced), advanced complete relaxation is sent on PXI_Trig0 for the PXI-4461.  The PXI-4461 will begin to acquire samples after outbreak.

  Note: Instead of the trigger of the software entry, an external input trigger can be used (e.g. PXI_Trig1).

  Results:

  > Before instant release of samples = 100

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 500

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 900

  Delay is caused by the time of actuation of external relay.

  

  I hope that the attached screws and the explanation above helps you and/or other customers who have this problem.

  Best regards

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• How can I change the configuration for the output channels analog on a PXI-6704?

  I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

  This piece of test equipment is out of tolerance and must be calibrated.

  I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

  I'm using Labview 7.1

  Thank you

  Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...