Synchronization of the configuration shows two buttons

Similar Questions

• VPN3000 Load Balancing - synchronization of the Configuration

  I have found information on the configuration of hubs for load-balancing and realized that. I can't find any information on how the Member devices keep their configurations in sync. Is it automatic or is it necessary to update all members manually when changes are made?

  Dennis,

  Automatic synchronization of the configuration on the hubs is not possible. You must manually synchronize the configs.

  See you soon

  Gilbert

  Rate this post if it helps

• How to avoid synchronization of the settings between two computers

  I have two computers (a desktop computer all-in-one DELL and HP laptop).  Log-in at once is my Microsoft account.

  PROBLEM: When I 'customize' screen on one, the same changes are made on the other.   It is not desirable.  How to avoid that, far from making a second Microsoft account?

  To clarify - the ICONS are not duplicated, just any changes made to the themes of office such as colors or backgrounds.

  Thanks in advance!

  Hello Beckinista,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact you want to avoid synchronization of the settings between two computers.

  I suggest you stop the synchronization of all of the settings between two computers and check if it helps.

  Please see this link:
  Sync between multiple PCs with OneDrive settings
  http://Windows.Microsoft.com/en-us/Windows-8/sync-settings-PCs

  Note: Please see section "to stop all sync settings" in the article above.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Change in Position of the slide show Navigation buttons

  Hey,.

  I do a slide show full page and he looks good in design, but when I Preview in both the muse and a browser, the slide show movies of next button in the middle of the page.

  That's what it looks like the design:

  

  This is what it looks like in preview:

  

  Here is my page settings:

  

  Also as a side note, I can't seem to select start and on my slide show prev buttons more.

  Thanks heaps.

  Hello SkykZelda,

  Try to select the left/right arrows individual slideshow and pin them to the right and to the left of the browser accordingly.

  Kind regards

  Ankush;

• JOINT - synchronization of the Configuration

  Is it possible to synchronize the JOINT configuration between the two IDSMs installed on two independent chassis.

  N ° you must do it manually or use Cisco Security Manager as far as I KNOW.

  All clients should push Cisco to give 'real' failover / high available. supported.

  Concerning

  Farrukh

• I can't read the words of the security and the sound does not work. How can I complete the configuration of the synchronization?

  How anyone can read the enigmatic words for synchronization of the configuration is beyond me. Just audio does not work. If not, how can I transfer my cache settings, including passwords for sites in my new computer?

  Hello

  You can try after some time. To check possible synchronization problems, please see this.

  Alternatively, you can manually transfer the necessary personal data.

• configuration of two monitors

  I have two monitors that I have yet to install, I tried to go on you tube but videos I saw said that I needed to add a new driver for the configuration of two monitors, I hope that is not the case for me, is it simple step by step video or a link to a page where I can get help to install? and also how the speakers settings will be reconfigured as there are two monitors?

  Thank you!

  Here are the specifications of your HP Pavilion 2511 x WLED monitors. According to the specifications, they take over HDMI, DVI - D and VGA inputs. Your AMD Radeon HD 7570 should support DisplayPort, HDMI, DVI - D and VGA outputs. According to the cables supplied with the monitors, I would connect a monitor to the computer with a DVI cable and the other to the computer with an HDMI cable. If these cables did not come with monitors, please list all the cables you have.

  In regard to the sound, the compact HP 2.1 speaker system should have a 1/8 plug Sage Green "stereo that connects to a corresponding color decision (#9) on the back of your computer. Nothing additional needs to be configured because the monitors were not pregnant.

  

• Two button dialogue - fire once

  I have an application where I need to get a lot of responses from the user through two button dialog boxes. I need to feel the change of State of a locked DI and when he goes UP, display a dialog of two buttons for the user to interact. As this happens inside a while loop 100ms, I need to remove the dialog box after the user selection is made. Otherwise the pop up will happen several times as the DI is locked in a HIGH State.

  While I was able to get the feature with a registry change (see attachment to LV2009), I was wondering if there was a better way to do this kind of "once-only-messages?

  Thank you

  It is not a good idea to change the status of the digital input which is "read only".

  The final VI with the required change is as below:

  

• With the help of a button to change the color of a chart while remaining in the same frame.

  Is this possible?

  I'm trying to simulate the contrast of the LCD using two buttons.

  The LCD screen is a graph on a keyframe that runs along the timeline.

  Not sure how to start with action script for this... I would use %valeurs hexa% if possible, but had no luck so far with my AS2.

  The hard part is that I have a text box on top of the LCD screen on several different keyframes and the color / brightness of this will have to change accordingly with the LCD.

  Thank you!

  Pat

  You can use:

  MC. = [0xabcdef, 0xaabbcc, etc...];

  MC.c = new Color (mc);

  MC.index = 0;

  {btn1.onRelease = Function ()}

  mc.c.setRGB (MK. A [MC.index]);

  MC.index = (mc.index + 1) % mc. . Length;

  }

• Switch between the two button symbols

  Hello

  I'm new to AS, but not new to programming.  I'm using Flash CS4.  Here's what I'm trying to do.

  I have two button symbols, PlayBTN and PauseBTN. They are used to control the playback of the slideshow. When I use one or the other to control the slide show, it works. However, what I want to do is to switch between the two buttons, so that they work together like this:

  1. If the slide show is playing, PauseBTN is visible. If PauseBTN is clicked, stops slideshow and PlayBTN becomes visible.

  2. If the slideshow is paused, PlayBTN is visible. If PlayBTN is clicked, stops slideshow and PauseBTN becomes visible.

  In other words, clicking on the button control not only the slideshow, but changes which button is visible.

  I got this working with a video clip of two frames and bitmaps in static, but when I swap the bitmaps for the buttons, rollovers button stop working.

  Can someone give me some advice please?

  ... Mike

  This is not a flexible configuration.  PauseBtn should be a movieclip with a up more and eventually to the bottom of chassis and PlayBtn either a movieclip with a up more and eventually to the bottom of the frame.  You can then use:

  PauseBtn._visible = true;  or false ot visible property of your control button.

• What is the right way to use variables controlled by the two buttons and programming?

  First of all, I apologize if this has been discussed before.  I know not how to phrase succinctly the application, so maybe I just missed the search terms.

  We have several pieces of the Labview software in the laboratory that automatically control things like the taps and heaters.  Sometimes we also manually control these same things.  I'm moving old NI PCI (and older versions of Labview) maps to a variable and based on compactRIO system shared network.  However, I'm still not on best practices to achieve.  I need to be able to have a script running at any time control panel so that I can access, for example, a valve controller (which is just a Boolean), and I need power open and close the valve by programming other scripts.  I need, of course, the control panel to track the State of the valve until it opens another script, the Panel indicates that it is open, and the next push on the control panel it will close.

  Historically, this has been processed using structures business to move from a "computer control" and "hands-on" with global variables that define the State of the valves.  Of course, this is not recommended.

  So far, I've played with the help of two variables, a status of valve and the other for the State of button.  The Panel configuration then loops, reads the status of the valve and puts the State of button if the State of the valve has changed.  I can do this with registers at offset or with the structures of the event, but anyway, it gets very crowded and seems inefficient.  Is there a good way to do this in Labview?  It seems this is a common problem, so I hope there is an easy and elegant solution that I've missed.

  Variable published use shared network.  Your scenario and your manual of the interface and change the variable and then shared your cRIO reads fair value and writes the appropriate values.

  Now for a cool part.  On your manual interface, right-click on your heart control that you want to use to control the shared variable and go to properties.  There should be a data binding tab in the Properties dialog box.  You can bind a control/indicator to a published network shared variable.  So this button will always be attributed to the current state.

  Your script should just read the shared variable before resuming to verify that it is in the correct state.

• How to synchronize the analog input and the output of two different USB data acquisition boards

  Hi all

  I have two tips very different USB NI USB 6008 case, which I use to acquire the data (analog input) and a USB of NI 9263 is a output analog only site I use to route a signal (in this case a square pulse). The reason why I use the outputs analog 6008 is because I need to deliver negative tension and need the full +/-10 v range.

  Looking at similar positions, I'm pretty sure that I can't use an external trigger or a common clock, I also tried to use the timed synchronization of the structures but no cigar.

  I'm including a quick vi I whipped showing how the jitters because of the lack of synchronization signal. The OD of the 9263 connects to AI in the 6008 in this example.

  I talked to a specialist in the phone and tols me that's not possible.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Check the configuration of time synchronization in ESX 4.1 for Windows domain

  Hello

  Sorry if this topic will cover many, but browsing the forums I found some conflicting info and thought that it easier to ask you if I had it correct.

  I'm ready to virtualize our Active Directory environment and put all our virtual machines RODCs.  We have an environment with 8 ESX hosts and vCenter 4.1.  Most VMs are Windows member servers, but also several RHEL servers and a few non-domaine joined Windows servers.  We have also two domain controllers that are already virtual machines.  I'm down to the last physical domain controller which is our role PDC FSMO server so the Master Timekeeper.

  That's how I was going to change our Setup for the services of time with all being virtual domain controllers.

  1. the virtual FSMO PDC of our clocks of field it is time via w32tm to an external time such as us.pool.ntp.org source. That's the only DC with an external time source.
  2. all the domain joined machines Windows, whether virtual or physical (servers and clients OS) get their time via the domain controllers.  PDC-> all the other DCs-> clients and member servers.  On VMS, we do not use VMTools do a time synchronization. Throughout the normal Windows AD process.
  3. all ESX hosts serve time source external PDC, described above.
  4. all the non-domaine attached (Windows or Linux) machines that are virtual machines get their time synchronization via the VMTools Sync feature.
  Have I not my correct thought and not its ok to ensure synchronization of time between the field in a virtualized ad environment?
  Thanks in advance,
  HR

  That sounds about right, and I've implemented almost identical to this designs. The key is, as you say, do not sync using the time host via VMware Tools, in particular on the role of the PDCe.

  I also usually use this method to ensure that the PDC (role 5) is the only way to an external time source:

  http://blogs.technet.com/b/askds/archive/2008/11/13/configuring-an-authoritative-time-server-with-group-policy-using-WMI-filtering.aspx

• Metadata for the library shows only a camera when there were two

  Hey guys - my wife and I recently shot a wedding, and one of the devices was out of sync per half hour.  When we enter the library metadata in LR (latest version), it only shows a camera from the drop down when we each shot with a separate camera.  It's looking like we're going to have to synchronize in lenses, unless anyone knows how we can get LR to show two different boxes.  Any thoughts?

  Just figured it out with the help of Rikk.  Added a new column and drop down to the serial number of the camera (it wasn't show before) and they have both shown.  We had just the camera fall down which shows also the below serial numbers.  Thank you guys!