ACS v5.3 selection of identity for authentication

I configured before ACS v4.2 to authenticate network devices using internal users first, and if the user does not use AD users list.  But with v5.3, I have some problems doing so, the policy of identity I use result rule based selection option, I configured 2 policies for the source of identity, one for users inside and another user AD strategy, but it only works with the first policy, internal users or the AD, but only works for the first political identity.

No idea how to do this, if the user is not on the policy first, continue to the next policy.

Thank you

Juan Carlos

Juan Carlos,

Under the identity store sequence settings you can uncheck the "if internal user/host not found or disabled then quit sequence and treat it as"User Not Found"?"

Please try again with the AD user and share the results. Please share a screenshot the parameters of identity for the Administration of the unit.

If the problem persists to share details of the ACS of ACS monitoring and reports Error Message as well.

If this has been helpful, do not forget to rate

Kind regards.

Tags: Cisco Security

Similar Questions

  • Devices configured for authentication under ACS

    Hi friends,

    Would like to know how many devices can be configured for authentication under ACS version 5.6.0.22 (Cisco Secure Network Server 3415).

    I'm not able to find the same everywhere.

    Concerning

    JN

    Hello

    It depends on the license that you install on the ACS 5.6.

    All deployments of 5.6 ACS supports customers AAA 100 000, 10,000 network, 300,000 users and 150 000 host device groups. 5.6 ACS collector server log can handle 2 million records per day and 750 messages per second for stress sent by the various nodes of ACS in the deployment on the server of log collector.

    Please visit this link:

    http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

    With the Base license, a Cisco Secure ACS 5.6 appliance or virtual machine software can support the deployment of up to 500 devices of access network (DNA) such as routers and switches. These are not authentication, authorization and accounting clients (AAA). The number of network devices is based on the number of unique IP addresses that are configured. The limit of 500-device is not a limit for each individual device or the instance, but a limit of scale that applies to a set of instances of Cisco Secure ACS (primary and secondary instances) that are configured for replication.

    The optional add-on of large deployment license allows deployment to support over 500 network devices. Only one major deployment license is required by the deployment because it is shared by all instances.

    Please visit this link:

    http://www.Cisco.com/c/en/us/products/collateral/security/secure-access-...

    Kind regards

    Aditya

    Please evaluate the useful messages.

  • ACS Auth: Use of group data for the authentication of the user-> security problem?

    IM only using a VPN-installation (router, ACS, Cisco VPN Client) and I noticed that the name of the Group and the Group decrypted password can also be used in the second step of the authentication (the extent of authentication or authentication of users), which is a big security concern. What wrong with my setup.

    For the test I have set up a VPN configuration as described in cisco documents. Here, it also works. The identification information of the Working Group in the authentication of the user, too, which is quite logical, because the group credentials are also a user in the database of GBA. Of course, this user can be authenticated in the user authentication process.

    Who is wrong? How other admins to solve this problem? Am I wrong in my approach?

    Thank you!

    Yes, permission will have password for "cisco", at least for isakmp and pki. The group will send its name and password Cisco to receive the av pairs (ASA has a function to create a "good word of different past" but he's not here on IOS, AFAIR)

    It is a restriction known - you should not use the same server for authentication and authorization, with IOS and ASA.

    Did you give this property (either / or):

    -local isakmp authorization

    -l' authentication certificate (Group)

    -sharing features for authentication and authorization between servers.

    I don't think we can do much wise configuration to prohibit this behavior.

    Edit: spelling correction.

  • n005tx Pavilion 15: "selected image is not authenticated to. "Press on enter continue" at the start of the

    Hi all, I have a pavilion laptop g6 - 2253ca who works with a windows 8 (64-bit). I have a strange problem since this morning and an error msg "selected image is not authenticated to. "press on enter continue ' that appears when I try to start. I have not installed program on my computer before it happens. I just sailed on the Internet and all of a sudden the screen is grey and the msg appeared on this subject.

    I went on several forums for information on this subject. That's what I did:

    -hard reset
    -Restart and boot into BIOS
    -Disable secureboot and enable legacy initialization
    -Press F10 to save and exit BIOS

    -Restart

    -the system asked me to enter a digit of 4 password and press ENTER to apply the changes

    -done, but I got stuck another MSG: "no boot device, insert the boot disk and press any key.

    Not able to find something else to move to another service I thought that maybe the value default bootable device was not the HARD disk if:
    -I restart and boot into the boot F9 Manager
    -does not not the same msg (no boot device, insert the startup disk and press a key) is displayed.

    Try to run the auto repair using the F11 Recovery Manager, but I can't start on it during startup.

    So, what should I do now? I am really disappointed...

    Hello

    Try loading at F2 run check disk test hard if that passes you will need a recovery disk. If the hard drive is not detected reinsert the disc hard try to rerun the test if you have the same hard disk problem that went wrong to replace the drive. Please call HP technical support check for warranty and the part replaced.

  • HP Pavilion G6-2292SA: selected image is not authenticated

    A few months ago my laptop came with the message 'selected image is not authenticated to' but I just left him because I was in the middle of loads of deadlines United and had no time to try to sort them. I turned on my laptop about once or twice since then to see if there is no change, but he always showed the same message. When I turned it on today to try to sort it's just come up with a white screen, the black light is turned on and when I press like f10 things happens at the bottom of the screen with "F10"... BIOS Setup Options"but that's all that I can see, I can't seen of these 'options '. Pleaaaase help

    @sofiabruna,

    Thanks for posting back.  Here is the link to your maintenance and service guide.  Here the reference numbers and support for hard drives.  Then, you can contact HP shopping for pricing.

    Maintenance and Service Guide

    Here is the link to HP Shopping.

    Thanks again for posting and have a great day.

  • Cisco VCS and LDAP for authentication of users

    I have a question about setting up LDAP for authentication of the user on the VCS. I want to have redundancy in my LDAP link. I believe that this is possible by setting a FULL domain name to the address of the LDAP server, then selecting a type of SRV resolution. What I'm not clear on is what the value for the server address would be if I used actually as SRV type of resolution. I should also add that I am looking to use TLS

    To clarify, if my AD domain name is myad.netcraftsmen.net. I have set the field as server address:

    myad.netcraftsmen.NET: assuming that VCS properly interrogate the DNS for the _service._proto correct parameters?

    or would I need to create an SRV record to that effect and set the field server address with the address (including the fields of _service._proto)

    or I need to specify one of the SRV records formats used by MS AD areas (there are several).

    If the latter, then what SRV record for TLS. I don't see records with port 389 (non-secure).

    My intuition tells me that this is probably the first option, but I could be far away.

    Anyway, thanks in advance for any input.

    Kind regards

    Bill

    Hi William,.

    I just checked it on a X6.1 VCS, and it seems that VCS searches SRV _ldap._tcp.domain (where 'domain' has been entered as the server address), both when the encryption is set to 'None' and 'TLS '.

    Hope this helps,

    Andreas

  • ACS NAC 5.2 comments Sponor Radius Authentication

    For some reason, I can't get the Hall "sponsors" for authentication on the server of comments of the NAC (2.0.2) using ACS 5.2 via Radius.

    I managed to find a way to get feedback from the NAC authentication Radius for 'Administrator' to work by adding the value of custom RADIUS IEFT-6 under...

    • Elements of strategy
    • Authorization & permissions
    • Access to the network
    • Authorization profiles

    I added a strategy & tab attributes Radius... I manually entered an attribute that looks like the following:

    • Dictionary type: = IETF RADIUS
    • The RADIUS attribute: = Type of Service
    • Type of attribute: = enumeration
    • Attribute value: = static
    • Value = "administrative".

    Then I created an access policy... I looked for an ad group specific - result = 'Name of custom political upstairs'...

    All this works fine... the Docs of the NAC comments you say the Radius server must return a value of IETF-6...

    When he enters in the sponsor section, it does not tell you the value of your server Radius must return... so just to smile, instead of 'Name custom top political', I tried "Allow access"... I tried the 'name of the custom policy above "...  Don't know what else to try to get this working... Anyone have any ideas?

    This is a similar to the document I'm following:

    http://www.Cisco.com/en/us/docs/security/NAC/guestserver/configuration_guide/20/nacguestsrvr.PDF

    Page 68 refers to the "Sponsor configuration authentication" Ray... it just tell you to change the order of authentication & add the Radius server...

    Use NAS prompt (7) instead of administrative (6) for users of sponsor.

    -Jesse

  • Problem setting 7606 router for authentication GANYMEDE +.

    Hello community support.

    I have two routers Cisco 7606 I tried in vain to have users authenticated using servers GANYMEDE +. As noted below, I have two servers (1.1.1.1 and 2.2.2.2) accessible via vrf OAM which is accessible from desktop to ssh login. The real IPS and FFS have been changed because it's a router of the company.

    I use two servers to authenticate on a lot other devices Cisco network that they work properly.

    I can reach the vrf servers and the source in use interface. I can also port telnet 49 if the source interface servers and the vrf.

    The server key is hidden, but at the time of configuration, I can see that it is correct.

    The problem is that after confuring for authentication RADIUS, the router always uses the password to enable instead of GANYMEDE. While debug output shows "incorrect password", why not the router authenticates using GANYMEDE? Why is he using the enable password?

    Please review the outputs below and help point out what I may need to change.

    PS: I have tried many other combinations, including obsolete without success, including the method proposed in this page.

    http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_vrf_tacas_svrs.html

    Please help I'm stuck.

    ROUTER #sh running-config | s aaa

    AAA new-model

    AAA server Ganymede group + admin

    Server name admin

    Server name admin1

    IP vrf forwarding OAM

    Ganymede IP interface-source GigabitEthernet1

    AAA authentication login admin group Ganymede + local activate

    AAA - the id of the joint session

    ROUTER #sh running-config | dry Ganymede

    AAA server Ganymede group + admin

    Server name admin

    Server name admin1

    IP vrf forwarding OAM

    Ganymede IP interface-source GigabitEthernet1

    AAA authentication login admin group Ganymede + local activate

    GANYMEDE Server Admin

    1.1.1.1 ipv4 address

    button 7 XXXXXXXXXXXXXXXXXXXX

    GANYMEDE Server admin1

    2.2.2.2 ipv4 address

    button 7 XXXXXXXXXXXXXXXXxxxx

    line vty 0 4

    authentication admin login

    ROUTER #sh Ganymede

    GANYMEDE + - public server:

    Server name: admin

    Server address: 1.1.1.1

    Server port: 49

    Opening of socket: 15

    Firm grip: 15

    Write-offs of socket: 0

    Socket errors: 0

    Socket timeouts: 0

    Failed connection attempts: 0

    Total packets sent: 0

    Recv packets total: 0

    GANYMEDE + - public server:

    Server name: admin1

    Server address: 2.2.2.2

    Server port: 49

    Opening of socket: 15

    Firm grip: 15

    Write-offs of socket: 0

    Socket errors: 0

    Socket timeouts: 0

    Failed connection attempts: 0

    Total packets sent: 0

    Recv packets total: 0

    Oct 22 12:38:57.587: AAA/BIND(0000001A): link i / f

    22 Oct 12:38:57.587: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    22 Oct 12:39:04.335: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    22 Oct 12:39:10.679: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    ROUTER #sh worm

    Cisco IOS software, software of c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

    Technical support: http://www.cisco.com/techsupport

    Copyright (c) 1986-2012 by Cisco Systems, Inc.

    Updated Saturday, March 30, 12 08:34 by prod_rel_team

    ROM: System Bootstrap, Version 12.2 SRE (33r), RELEASE SOFTWARE (fc1)

    BOOTLDR: Cisco IOS software, software c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

    The availability of ROUTER is 7 weeks, 5 days, 16 hours, 48 minutes

    Availability for this control processor is 7 weeks, 5 days, 16 hours, 49 minutes

    System returned to ROM by reload (SP by charging)

    System restarted at 20:00:59 UTC Wednesday, August 28, 2013

    System image file is "sup - bootdisk:c7600rsp72043 - advipservicesk9 - mz.151 - 3.S3.bin.

    Last reload type: normal charging

    Reload last reason: power

    This product contains cryptographic features and is under the United States

    States and local laws governing the import, export, transfer and

    use. Delivery of Cisco cryptographic products does not imply

    third party approval to import, export, distribute or use encryption.

    Importers, exporters, distributors and users are responsible for

    compliance with U.S. laws and local countries. By using this product you

    agree to comply with the regulations and laws in force. If you are unable

    to satisfy the United States and local laws, return the product.

    A summary of U.S. laws governing Cisco cryptographic products to:

    http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

    If you need assistance please contact us by mail at

    [email protected] / * /.

    Processor CISCO7606 - S (M8500) Cisco (revision 1.1) with 3670016 K/K 262144 bytes of memory.

    Card processor ID FOX1623G61B

    PLINTH: RSP720

    CPU: MPC8548_E, Version: 2.1 (0 x 80390021)

    KERNEL: E500, Version: 2.2, (0 x 80210022)

    CPU:1200 MHz, CCB:400 MHz, DDR:200 MHz,

    L1: D-cache 32 KB active

    I'm hiding active 32 KB

    Last reset of tension

    3 virtual Ethernet interfaces

    76 of the gigabit Ethernet interfaces

    8 ten interfaces Ethernet Gigabit

    3964K bytes of non-volatile configuration memory.

    500472K bytes of the map of PCMCIA ATA internal (512 bytes sector size).

    Configuration register is 0 x 2102

    To resolve this problem. Please replace the below listed order

    AAA authentication login admin group Ganymede + local activate

    with;

    Enable AAA authentication login default local admin group

    You have set the group name server as a list of methods and instead use admin as a group of servers, you used Ganymede +.

    Note: Please ensure that you have local users and enable the password configured in the case of Ganymede inaccessible server.

    ~ BR
    Jatin kone

    * Does the rate of useful messages *.

  • Java Applet constantly asked for authentication

    With having an application of ADF on Weblogic 10, with occasional access to a Java applet. The Java applet is loaded whenever this is necessary and not charge whenever it is not in a facet. The applet is currently in the folder public_html/applet.

    When we define the SSL configuration to require a client certificate when the Java applet loading, it will constantly ask a client certificate even if the user has already presented to the client by hitting the site:

    Identification of the required authentication request. Select the certificate to use for authentication.

    It's annoying for users and the Java Applet requires no authentication. Is it possible that we can disable authentication or remove the prompt?

    Here's the code included:

    <applet height="1" width="1" code="applet.Applet.class"archive="/app/applet/SApplet.jar" /><param name="permissions" value="all-permissions"/></applet>

    Things I've tried:

    (1) configure the Applet on HTTP instead of HTTPS; I get a warning about mixed content and still get authentication pop up.

    (2) created a small applet that only types "HELLO World" in the console, still get authentication pop up

    Here's the console window:

    Java plug-in 1.6.0_35

    With the help of 1.6.0_35 - b10 version JRE Java hotspot Client VM

    Home Directory user = C:\Users\mfan

    Security: property value package.access Sun., com.sun.xml.internal.ws., com.sun.xml.internal.bind., com.sun.imageio., com.sun.org.apache.xerces.internal.utils., com.sun.org.apache.xalan.internal.utils.

    Security: property package.access nine value Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws

    Security: property value package.access Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws

    Security: property package.access nine value Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy

    Security: property value package.access Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy

    Security: property package.access nine value Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy, com.sun.jnlp

    Security: property value package.definition Sun., com.sun.xml.internal.ws., com.sun.xml.internal.bind., com.sun.imageio., com.sun.org.apache.xerces.internal.utils., com.sun.org.apache.xalan.internal.utils.

    Security: property package.definition nine value Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws

    Security: property value package.definition Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws

    Security: property package.definition nine value Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy

    Security: property value package.definition Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy

    Security: property package.definition nine value Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy, com.sun.jnlp

    Security: property value package.access Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy, com.sun.jnlp

    security: property package.access new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.javaws,com.sun.deploy,com.sun.jnlp,org.mozilla.jss

    Security: property value package.definition Sun.,. com.sun.xml.internal.ws,. com.sun.xml.internal.bind,. com.sun.imageio,. com.sun.org.apache.xerces.internal.utils,. com.sun.org.apache.xalan.internal.utils, com.sun.javaws, com.sun.deploy, com.sun.jnlp

    security: property package.definition new value sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.javaws,com.sun.deploy,com.sun.jnlp,org.mozilla.jss

    Basic: additional progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@1df073d

    base: Plugin2ClassLoader.addURL parent called to https://192.168.130.99/app/applet/HelloWorld.jar

    network: cache entry not found [url: https://192.168.130.99/app/applet/HelloWorld.jar, version: null]

    network: connection https://192.168.130.99/app/applet/HelloWorld.jar with proxy = LIVE

    network: connection http://192.168.130.99:443 / with proxy = LIVE

    Security: loading Root CA certificates to C:\Program Files (x 86) \Java\jre6\lib\security\cacerts

    Security: support of root CA certificates from C:\Program Files (x 86) \Java\jre6\lib\security\cacerts

    Security: SSL CA root certificates of C:\Users\mfan\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecacerts loading

    Security: support of C:\Users\mfan\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecacerts SSL root CA certificates

    Security: loading SSL CA root certificates to C:\Program Files (x 86) \Java\jre6\lib\security\cacerts

    Security: support of certificates of CA root SSL from C:\Program Files (x 86) \Java\jre6\lib\security\cacerts

    Security: the deployment of C:\Users\mfan\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecerts loading SSL certificates

    Security: support of the deployment of C:\Users\mfan\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecerts SSL certificates

    Security: loading of the deployment session certificate store certificates

    Security: charge of the deployment session certificate store certificates

    Security: loading of the ROOTS of the Internet Explorer certificate store certificates

    Security: charge of the ROOTS of the Internet Explorer certificate store certificates

    Security: checking if the certificate is denied deployed certificate store

    Security: checking if the certificate is in the deployment session certificate store

    Security: check if the SSL certificate is in the permanent deployment certificate store

    Security: KeyUsage does not allow for digital signatures

    (and here's the guest comes in to the top).

    In fact, if archive http://URL works fine. No longer request authentication here.

  • link and prompt for authentication

    Build the following conditional url it dipslays the link correctly icon when prod_zone is in (1,2,3). But when I click on the link icon, I still encounter authentication application screen. This page is part of the application and already authentication occurred before you reach this page. Why he asked for authentication when I click the icon?
    Can u share your thoughts? Thank you.

    select
case when prod_zone in (1, 2, 3) then '{a href="f?p='
 || :APP_ID 
 || ':11:'
 || :SESSION_ID
 || '::::P11_PROD_ID,P11_PROD_name:' 
 || prod_name 
 || '"}' 
 || "< img src="/i/edit_big.gif" alt=""> 
 || '{/a}' 
else prod_name
end prod_name,

prod_id, prod_zone, prod_quantity
from TEST

{code}



Tai                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Replace: SESSION_ID with: APP_SESSION

  • Firefox doesn't show popup for authentication

    I use firefox for internet access through my University proxy. I type my password and my user account.
    Recently, firefox does not show the popup for authentication, where I type my user account and my password, so I can't access my network of the University. I have not changed the proxy configuration (I checked it, it's as it should be).
    When I try to access any Web site, I get the message "access to the cache of refused" and it says that I have to authenticate to access. However, there is no authentication window to enter my user account and password.
    I tried to configure Chrome and Safari, and they worked perfectly.
    My computer is a mac running the mavericks.

    See:

    In Firefox 30 and later NTLMv1 auth has been disabled, NTLM supported on platforms other than Windows is now obsolete

    In Firefox 31 for NTLMv1 auth has been restored to only secure connections (Bug 1023748).

    • Network.Negotiate - auth.allow - insecurity-ntlm-v1 = false
    • Network.Negotiate-auth.allow-insecure-NTLM-v1-https = true
    • bug 1023748 - Allow NTLMv1 via SSL/TLS or intranet access is broken on Firefox 30 for platforms other than Windows

  • several hosts aaa server for authentication vpn

    ASA5510 - 7.2 (1)

    Using the following configuration, I try to have several radius servers configured for authentication backup in case of failure of the primary vpn. This seems to work ok. But once the main server upward when the asa will begin to use it again. The release of "aaa-Server 172.25.4.20 host" said

    Server status: FAILURE, server disabled at 08:04:25.

    How do reactivate you it?

    RADIUS protocol AAA-server adauth

    adauth AAA-server 172.25.4.20

    key *.

    authentication port 1812

    accounting-port 1813

    adauth AAA-server 172.25.4.40

    key *.

    authentication port 1812

    accounting-port 1813

    tunnel-group group general attributes

    address pool pool

    authentication-server-group adauth

    by default-group-policy

    You can add the option in the Group aaa-server:

    "reactivation in timed mode.

    This causes a dead server is added to the pool after 30 seconds.

    The following link has some good info on the options available. I suggest looking for the doc for the "reactivation".

    http://www.Cisco.com/univercd/CC/TD/doc/product/multisec/asa_sw/v_7_2/cmd_ref/crt_711.PDF

    -Eric

    Be sure to note all the useful messages.

  • Autonomous AP521 can be configured for authentication WPA/TKIP with no radius server?

    The AP521 can be configured for authentication WPA/TKIP with no radius server?

    the datasheet, wpa with tkip and wpa2 with aes are supported.

    you want to use (no RADIUS) wpa - psk with tkip. WPA2-psk aes and tkip not use.

  • NPS Windows Help for authentication of aaa for Cisco router - is it safe?

    I am very confused about how all this works and was hoping someone could help me.

    I followed a bunch of tutorials online for authentication RADIUS of installation on a Cisco router and he did to a NPS Windows Server. Now I can ssh into the router my AD account.

    Now that I got it to work, I go to the settings to make sure everything is secure.

    On my router, the config is pretty simple:

    aaa new-modelaaa group server radius WINDOWS_NPSserver-private 123.123.123.123 auth-port 1812 acct-port 1813 key mykeyaaa authentication login default local group WINDOWS_NPS

ip domain-name MyDomcrypto key generate rsa

(under vty and console)# login authentication default
    On the NPS Windows:
    • I created a new RADIUS client for the router.
      • 

    • Created a secret shared and specified Cisco as the name of the seller.
      • 

    • Created a new strategy of network with my desired conditions.
      • 

    • And now the frame of the configuration of the network policy that worries me:
    

    

So initially I thought my AD credentials were being sent over the wire in plain text, but I did a capture and saw this:


    


    
How is my password being encrypted and how strong is the encryption?

Another thing is how can I configure aaa authentication with mschapv2? The documentation I saw for mschapv2 uses the "ppp authentication ms-chap-v2" command, but I'm not using ppp I'm using aaa with a radius server.
 

    			 
    Hello
    

    RADIUS encrypts the password, but sends the username in clear. GANYMEDE encrypts the user name and password.
    

    You can find the encryption used by RADIUS in the RFC scheme:
    

    https://Tools.ietf.org/html/rfc2865#page-27
    

    MS-Chap-V2 is used for the authentication of users such as the remote access and vpn, not management switch
    

    Thank you
    

    John

  • How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

    Hi team

    Hope you do well. !!!

    currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

    1 users will connect: user advanced browser on SSL VPN pop past username and password.

    2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

    3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

    4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

    This is my requirement, so someone please guide me how to set up step by step.

    1. how to set up the Radius Server?

    2. how to configure CISCO ASA?

    Thanks in advance.

    Hey Chick,

    Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

    http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

    Hope this helps

    Knockaert

Maybe you are looking for