ACS with ldap Unix

Similar Questions

• Integration of ACS with AD

  Hello support,

  I downloaded an ISO image of the ACS and test it on my vmware. I tried to integrate my acs with my active directory which is also inside my vmware.

  I configured the NTP ACS pointing to my AD server server. But the connection failed when I checked the connection between the ACS and my AD server.

  What could be the problem on my installation?

  Kind regards

  mbox23ron

  If your time is synchronized, then the second typical reason for the AD-integration not working is a DNS miscofigured.

  The ACS must use AD - DNS and you should have work the research front and rear.

  Sent by Cisco Support technique iPad App

• 802. 1 x with LDAP

  Hello

  Please help, I have 802. 1 x configured with JUMP, and everything is OK. but who do not work with LDAP?

  Can someone help me to do this?

  Omar,

  LDAP is not supported with JUMP. Pls check this link

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/ACS32/User02/o.htm#wp623530

  Kind regards

  ~ JG

  Note the useful messages

• access remote vpn with ldap

  Hi all

  IM, configuration of a vpn for remote access with ldap, for what I see in some examples, I need to create a user/pass.

  In my case, I already configured the aaa for the ldap Protocol Server. I also have the Group tunnl with the authentication server.

  I need to create a user/pass?

  Thank you.

  Hello

  I see what you mean!

  It is not necessary for the integration of LDAP.

  You don't have authentication LDAP not the LOCAL database, so no need for this.

  Do not forget to rate all my answers

  Julio Carvajal
  Main and specialist of the Core network security
  CCIE #42930, 2-CCNP JNCIS-SEC
  For immediate assistance commit to http://i-networks.us

• ACS with AD-with authentication of twins

  Hi gurus

  I want to integrate my 5.1 ACS with AD, my request is to check first for the machine authentication. If the machine authentication passes the customer name to username/password must be validated and customer should be in VLAN X. If the computer authentication fails, the user/password customer name must be validated. If authentication is successful the customer should be put into VLAN Y

  Let me know if this is possible

  Thank you

  NikhiL

  Nikhil,

  You can set a condition in your authorization policy and check whether the machine authentication has been made and your result out of this basic requirement.

  Here's a guide that corresponds to your questions:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1235978

  Thank you

  Tarik Admani

• Easy VPN with LDAP integration

  Hello!

  Currently I have an EASY VPN server on a Cisco 2911 with LDAP integration to authenticate the user.

  Everything works well except for one aspect. When you try to connect to the VPN (IPSec Client), the user is prompted for the credentials that are in this case their domain credentials. When the user places the identification information is immediately invite you for it again and again for about 1 minute. Then their and the VPN is in place.

  When I check the logs, I can't see him connect LDAP ranging down to connect to to the top.

  My question is if there is a way to make the LDAP connection, stand or accelerate this process.

  Thoughts?

  Jason,

  I had a long discussion with BU some time previously, if the LDAP protocol is in fact a taken AAA mechanism supported with ezvpn.

  To which (at the time) they said 'no '.

  We have therefore tabled a documentation bug:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCud35798

  (which has not yet been resolved).

  If it is in fact always a limiting factor, I suggest contacting your system engineer or open evidence of the TAC, so we can check with BU.

  M.

• Shibboleth with LDAP authentication

  I'm running in "Internal Server Error" trying to authenticate by using shibboleth with LDAP. Here is the ColdFusion error.

  Element MYSITESHIBBOLETH. USER name is not defined in the SESSION. The specific sequence of files included or processed is: \\commonspotshare.mysite.com\commonspot$\TEST\test.mysite.com\authenticate.cfm, line: 32

  And here's the line in the file authenicate.cfm 32.

  

  Well, I got it to work. I need to use reReplace() to extract the part that I need to make work of cfif and the session be prepared.

  session.testShibboleth = StructNew();

  session.testShibboleth.username = REReplace (http_header.headers.eppn, "@test.com", "","ALL");

  session.testShibboleth.mail = http_header.headers.eppn;

  session.testShibboleth.groups = ArrayToList (rematch ('WEB\.)) (([A - z-] +', http_header.headers.member));

  session.testShibboleth.isAuthenticated = "true";

• Authentication with LDAP...

  I managed with a LDAP hook which authenticate my domain account and it works well and everyone can connect!
  
  What I want to do is authenticate with LDAP and then leave through the eyes of the table to the top of my list of authorized users, or to refuse the connection.
  It's a small number of users is not a big problem for me to have the table with 5 or 6 users.
  
  I like the fact that the credentials of the user are managed by LDAP, and I don't want the hassle of creating ad groups that are managed by a third party.
  
  Does make sense?
  I would like to have some sort of model in the APEX that says...
  Okay, I know your domain account is valid now, let me see what you can do...

  you are an end-user - ok to connect
  you are an administrator of app - ok to connect
  you are person - not allowed - go

  I know how to deal with permitting components once the connection is permitted - just trying to find out how allow/deny connections
  
  Would I do that on the page of authentication scheme and if so where does make sense to put in a routine for that.
  
  Management of the Session of the page?
  Connection of transformation... perahaps here = > authentication process after?
  
  Thanks for your advice.
  
  I'm playing with some pl/sql that looks like this in treatment/Post-Authentication connection process
  
  declare
  Ditto Boolean: = FALSE;
  Start
  If: P101_USERNAME = "< a user authorized >."
  then same as: = TRUE;
  on the other
  owa_util. REDIRECT_URL ("< back to login page > '");
  end if;
  end;

  Hello

  I use LDAP had encountered the same problem. I think you have several choices available. It is the setting of "Message authentication" on the 'authentication scheme"that you use. Allows you to (citing the help): 'specify a block of code to run through the procedure of Application Express login (login API) after step of authentication (verification of login credentials). The login procedure executes this code after it has executed its normal functions include setting a cookie and to the recording of the session and just before it redirects to the page of the desired application. Specify this code as an anonymous block of PL/SQL that returns no value.

  Another method, which is what I used (probably not knowing the foregoing there!), has been to add in a branch on page 1 (the login page redirects always connections to page 1). Direction parameters are:

  Branch point: on charge: before header
  Target type: Page of this Application
  Page: 101
  Clear Cache: APP
  Condition type: NOT Exists (SQL query returns no line)
  Term 1:

  SELECT 1 FROM MYUSERTABLE WHERE UPPER(LOGINNAME) = UPPER(v('APP_USER'))
  

  Then, even if the user has valid credentials, the branch on page 1 always redirect them back to page 101 if their LOGINNAME does not exist in the MYUSERTABLE table.

  I'm sure there are other ways as well, and others advise on "message authentication" If you want to use

  Andy

• Many Apex with LDAP Applications

  Hi everyone :)
  
  
  I have 7 apex applications in the same workspace. I'm using apex authentication but my company now wants to do with LDAP. No problem here. They gave me the credentials and I put that it works, using the apex forum :D
  
  But I have a problem...
  
  I created a main application, with a page with buttons, calling the various applications in the workspace. Whenever I press the button for a request, it sends me to the login page for the application of different.
  
  How can a single login?
  
  
  Notes:
  
  Button code:

   
  f?p=APPLICATION_ID:1:&APP_SESSION.

  Vitor - change the current authentication schema for each application and put in a name of cookie in the cookie name attribute. Use the name of your choice, simply put the same name in each application.

  Scott

• Impossible to authenticate the user to ACS 5.1 with LDAP as identity outdoor store

  Hi, I have a server and Open-LDAP running ACS on my corporate network.
  Now, I'll set up a new linksys WAP - 54G and select WPA2-Enterprise with ACS as radius server.
  the first thing first, I created new internal user to ACS and trying to join the network wireless from my computer. I did it...

  then I move on an external entity (LDAP server). I set up the sequence of configuration and the LDAP identity, also select the access service.  but when I tried to authenticate from my computer, an error has occurred. I received:
  the following error 22056 object was not found in the store identities applicable (s)

  Ask me ' bout this thing, I implemented a cisco router 1841 to become customer of AAA. and surprise... it works!
  Yes, there is problems to authenticate to the windows of ACS (pointing to LDAP) platform?
  any suggestion?
  Thank you

  Hello

  Looks like you haven't mschap authentication is enabled on the ldap server. You can use eap - gtc instead, but need you:

  1 enable eap - gtc under protocols allowed on your ACS access policy

  2. install an eap - gtc "supplicant" on the windows box - if you have a wireless network card intel, the intel proset client supports eap - gtc

  This could mean a fair bit of work according to the number/type of wireless clients you have - could be useful on the LDAP mschap authentication activation.

  HTH

  Andy

• Cisco ACS with external DB - EAP - TLS

  Hi guys,.

  I understand how the EAP - TLS exchange works (I think), but if I have a client (with or without wire) that uses EAP - TLS with a CBS, I confirm the following.

  Let both users and computer certificates are used:

  1. customer and ACS are with each of the other automatic certificates to ensure they are known to each other. The eap - tls Exchange.

  2A. At any given time and I'm assuming until the successful eap - tls message is sent to the client, the ACS to check if the user name or computer name is in the AD database?

  2B. Wot is the parameter that is checked on the AD database?

  I read here that it can be: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/configuration/guide/peap_tls.html#wp999517

  Client certificates

  The client certificates are used to identify with certainty the user in EAP - TLS. They have no role in the construction of the TLS tunnel and are not used for encryption. A positive identification is made by one of three ways:

  CN (or name) comparison-compare CN in the certificate with the user name in the database. More information on this type of comparison is included in the description of the subject field of the certificate.

  Comparison of SAN-compare the San in the certificate with the user name in the database. It is only supported from the ACS 3.2. More information on this type of comparison is included in the description of the field another name of the subject of the certificate.

  Binary comparison - compare the certificate with a binary copy of the certificate stored in the database (only AD and LDAP for that). If you use the binary comparison of certificate, you must store the user certificate in a binary format. Also, for the generic LDAP and Active Directory, the attribute that stores the certificate must be the standard LDAP attribute named "usercertificate".

  3. with the foregoing, if options 1 or 2 are used (CN or SAN comparison), I guess it's just a check between a value out the CERT of the ACS and checked with AD, is that correct? With option 3, GBA exercise a complete comparison of the certificate between what the client and a "cert stored client" on the AD DB?

  Please can someone help me with these points.

  I'm so lost in this kind of things :)) I think.

  Thx a lot and best regards,

  Ken

  TLS only * handle * is complete/successful, but because the user authentication fails.

  CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 client SSL read Exchange of keys A

  CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 read Certificate SSL check

  CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: SSL = SSLv3 read state completed A

  CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 write change cipher spec A SSL

  CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: SSL = SSLv3 write finished State has

  CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 data embedded SSL

  CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State SSL = SSL handshake completed successfully

  EAP: EAP - TLS: handshake succeeded

  EAP: EAP - TLS: authenticated handshake

  EAP: EAP - TLS: CN using the certificate as an authentication identity

  EAP: State EAP: action = authenticate, username = 'Jousset', the user identity is "jousset.

  pvAuthenticateUser: authenticate "jousset" against CSDB

  pvCopySession: assignment session group ID 0.

  pvCheckUnknownUserPolicy: Group of session ID is 0, the call pvAuthenticateUser.

  pvAuthenticateUser: authenticate "jousset' against the Windows database

  External DB [NTAuthenDLL.dll]: Cache of Creating Domain

  External DB [NTAuthenDLL.dll]: Domain for loading Cache

  External DB [NTAuthenDLL.dll]: no UPN Suffixes found

  External DB [NTAuthenDLL.dll]: could not get the domain controller for dwacs.com trust, [error = 1355]

  External DB [NTAuthenDLL.dll]: could not get the domain controller for enigma.com trust, [error = 1355]

  External DB [NTAuthenDLL.dll]: could not get the domain controller for acsteam.com trust, [error = 1355]

  External DB [NTAuthenDLL.dll]: could not get the domain controller for vikram.com trust, [error = 1355]

  External DB [NTAuthenDLL.dll]: domain loaded cache

  External DB [NTAuthenDLL.dll]: could not find the user jousset [0 x 00005012]

  External DB [NTAuthenDLL.dll]: user Jousset is not found

  pvCheckUnknownUserPolicy: assignment session group ID 0.

  Unknown user "jousset" was not authenticated

  If EAP-failure (RADIUS Access-Reject (is sent, no EAP-Success(Radius Access-Accept).))

  And no matter how port will not be allowed to pass traffic unless the NAS device gets an EAP-Success(Radius Accept) for the user.

  HTH

  Kind regards

  Prem

• Unable to connect with LDAP

  I read through the other posts on the LDAP configs, but none of them solved my problem. I tried several combinations but am unable to connect. Is there something special that needs to be done after LDAP configs have been changed (restart a service or whatever it is)? Picture below is the last attempt.
  

  Greetings Alain,
  Insofar as "Extended to search for groups", we recommend some best practices I can go on if you create a pension however affair that should have no impact with your sense of logon process, all that would happen is when you login successfully he would lift an error message saying "account successfully connected. , but you do not all assigned roles. Please contact administrator... "etc".
  Please change the prefix of LDAP query to sAMAccountName and yo should be God to go.
  Two or three important things though... PLS, make sure you click on the button Edit then make you changes and then retype the password for the service account, and click on the "Save" button. It is essential to ensure that all changes you are able to record properly. Another thing I've met several times is you need to restart your service foglight (or restarting the server) because even if you update all the parameters correctly the old information is always cached, and you continue to get an error message.
  If always run you questions after that, please create a support ticket and I help to solve.
  Concerning

• Authentication of ACS with PEAP / MSCHAPv2 - customer rejecting Server

  Hello

  Have a network setup wireless with Cisco 1131AG towers, c6500 WISN module test (4404-WLC) is authenticating with a Cisco ACS appliance (1113) using PEAP and MSCHAPv2 authentication.

  The laptops have the Cisco SSC customer (in collaboration with Mgmt SSC utility).

  A self-signed certificate created on the fate of ACS and root exported and installed on the laptop computer of TCL.

  IF CSSC box 'validation Server' is not selected, the authentication process works and I am able to connect to the network.

  IF CSSC "Validation of server" is checked, the authentication will fail.

  The problem, it appears that the customer refuses the server certificate:

  "Server certificate chain is not valid.

  The GBA, in the 'fail' authentication logs, message the following is stated:

  "Authentication failed during SSL negotiation" (which obvioously refers to the strand of string not valid)

  Any ideas?

  When you create a self-signed certificate, is there a specific directory, when the server certificate must be located? as c:\cert\certificate.cer

  Also, the certificate name must match host name of GBA?

  i.e." CN ="

  Any advice or pointers would be appreciated.

  Thank you

  Questions, it's that when you check the validation of server Box, you must make sure you have the certification authority in the root Certification Authority trusted. For example, in windows, there is a list of servers CA where you check the server certificate validation and also one of the root certification authority is on the list. If the root CA is not listed, then you must add to the list and check it out.

  You are right on the client rejecting the sever cert... Authentication failed during SSL negotiation

  This doc will give you an overview:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml

• Authenticate on ACS with external database

  Hello

  Is it possible to connect to the ACS page with an external database?

  I want to connect to the ACS admin with an external account page.

  Thank you

  Not yet. I also wish that they will apply.

  HTH

• 5.2 ACS with authorization SRX GANYMEDE +.

  I'm trying to get the job GANYMEDE + on SRX 11.4R7.5. However, during my packet captures on SRX. I found the authorzation SRX with service request = junos-exec but ACS returns no value. causing the SRX to use the 'remote control' as a local user name and take the parameter class to it.

  "ACS, I found"Group mapping"policy correspondence to the"default rule"and leave" policy corresponded to the "default rule" as well.

  Please help to provide me with a link to the document on how to configure Group mapping and the authorization policy.

  You have to push the attributes in the policy elements > custom attributes even as fact here:

  https://supportforums.Cisco.com/message/3417297#3417297

  After that go to the access policies > default device admin > customize > it will open a page customize, in which you choose the types of use of the condition in the policy.

  something like AD1: External group and Nas ip address and used to match the authorization rule.

  External group: in case you want to check if user on AD should belong to this group.

  NAS ip address: go where the Ganymede request here

  Jatin kone
  -Does the rate of useful messages-