access remote vpn with ldap
Hi all
IM, configuration of a vpn for remote access with ldap, for what I see in some examples, I need to create a user/pass.
In my case, I already configured the aaa for the ldap Protocol Server. I also have the Group tunnl with the authentication server.
I need to create a user/pass?
Thank you.
Hello
I see what you mean!
It is not necessary for the integration of LDAP.
You don't have authentication LDAP not the LOCAL database, so no need for this.
Do not forget to rate all my answers
Julio Carvajal
Main and specialist of the Core network security
CCIE #42930, 2-CCNP JNCIS-SEC
For immediate assistance commit to http://i-networks.us
Tags: Cisco Security
Similar Questions
-
2 VPN SITE to SITE with ACCESS REMOTE VPN
Hello
I have a 870 router c and I would like to put 2 different VPN SITE to SITE and access remote VPN (VPN CLIENTS) so is it possible to put 3 VPN in the router even if yes can u give me the steps or the sample configuration
Concerning
Thus, on the routers will be:
Cisco 2611:
LAN: 10.10.10.0/24
access-list 100 permit ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255
access-list 100 permit ip 14.1.1.0 0.0.0.255 10.10.20.0 0.0.0.255--> VPNPOOL
!
10 ipsec-isakmp crypto map clientmap
defined by peer 172.18.124.199
match address 100
!
IP local pool ippool 14.1.1.1 14.1.1.254
!
access-list 120 allow ip 10.10.10.0 0.0.0.255 14.1.1.0 0.0.0.255
access-list 120 allow ip 10.10.20.0 0.0.0.255 14.1.1.0 0.0.0.255 --> NETWORK REMOTE
!
crypto ISAKMP client configuration group ra-customer
pool ippool
ACL 120
!
Please note that the configuration is incomplete, I added that relevant changes, you should bring to the allow clients of RA through the LAN-to-LAN tunnel, of course, the LAN-to-LAN settings should match to the other side of the tunnel that is mirror of ACL, NAT and so on.
HTH,
Portu.
-
1920 router access remote vpn LDAP living
Hello
What is required for a router in 1920 use AnyConnect and/or also integrate with AD LDAP?
Currently, this router supports legacy clients and has these licenses:
Technology for the Module package license information: "c1900".
-----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
------------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
Security securityk9 Permanent securityk9
given none none noneThe vpn to access remote client inherited integrate with AD LDAP?
Thank you.
As long as you are on IOS 15.3.3M3 or better, you have all the licenses you need for 3.1 AnyConnect run on your 1921.
The guide to directly connect your router to LDAP can be found here:
Personally, I would avoid directly interfacing with LDAP, because it can be a complex arrangement. While it can be done, it's easier to have your router to connect to the NPS Microsoft via RADIUS server for your authentication.
-
Auth of remote VPN through LDAP allow all users!
Hello
I have 5505 firewall and security license. I have configure remote VPN on firewall through CLI with the commands below. Remote VPN works well, but the problem is, it allows all remote VPN users. I need to restrict remote VPN access bit user, I need to configure via CLI, I don't want to go through ASDM, can someone help me with CLI?
ASDM I can able to perfom below things I'm not able to perform through CLI
Configuration-> access to the network (Client)-> dynamic access policies
Through ASDM I'm able to set the VPN users are allow to remote VPN access, how to set up same thing through CLI
Here's my CLI:
LDAP attribute-map CISCOMAP
name of the KFG IETF Radius-class card
map-value VPN CN = VPN, DC = domain, DC = com noaccess_pri
map-value VPN CN = VPN, DC = domain, DC = com noaccess_bk
map-value VPN CN = VPN, DC = domain, DC = com splitgroup_pri
map-value VPN CN = VPN, DC = domain, DC = com splitgroup_bk
AAA-server ldapgroup protocol ldap
ldapgroup AAA-server (inside) host 10.1.10.5
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password Inf0rmati0n1
LDAP-connection-dn cn = VPN, dc = domain, dc = com
microsoft server type
LDAP-attribute-map CISCOMAP
internal noaccess_pri group policy
attributes of the strategy of group noaccess_pri
VPN - concurrent connections 0
output
internal noaccess_bk group policy
attributes of the strategy of group noaccess_bk
VPN - concurrent connections 0
output
internal splitpolicy_pri group policy
Protocol-tunnel-VPN IPSEC l2tp ipsec
tunnel-group splitgroup_pri General-attributes
ldapgroup group-LOCAL authentication server
internal splitpolicy_bk group policy
Protocol-tunnel-VPN IPSEC l2tp ipsec
tunnel-group splitgroup_bk General-attributes
ldapgroup group-LOCAL authentication server
Thank you
Abhishek
Hello
You cannot configure the DAP via CLI Protocol because the configuration is saved in a file dap.xml and is stored in flash of the SAA.
You can configure the DAP protocol using the following link:
http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml#T4
Also note that the link mentions the following:
Note:
The dap.xml file that contains the attributes of selection policies DAP, is stored in flash of the SAA. Although you can export the file dap.xml out, the edit box (if you know about the xml syntax), and re - import again, be very careful, because you might ASDM stop treatment of DAP files if you have misconfigured something. There is no CLI to handle this part of the configuration.
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.
-
a public access remote vpn from an inside interface asa 5505
I'm trying to see if it is possible to accomplish what I am trying. I have an ASA 5505 with the following configuration.
1. There is an external connection, connected to the ISP. Let's say that it is 10.1.1.1/24 for ease. There is a remote VPN configuration as the access of people through this interface.
2. There's the inside network, which is the normal LAN. It's cable system in the office. to say that it is 172.20.0.1/24.
3. There is a wireless network on a VLAN separate called WLAN. It has an IP of 192.168.1.1/24. There is an ACL allowing traffic to that VLAN to the public internet.
Essentially, I would like users to be able to use the same VPN settings they use when connecting from outside of the Office when you are connected to WIFI.
Also, I would like that they can access public IP addresses that I have NAT would be to internal servers. In this way, they can use IP addresses when they use on the public internet.
Is this possible?
Hello
Well that's not going to be possible, the only thing you can really do is to activate the crypto map on the WLAN facing interface, by design, you cannot not access VPN, ping or manage the device on an interface which is not directly connected to you.
I hope this helps.
Mike
-
Hello
Im trying to figure out why vpn for remote access is at our company office fails. The scenario: we currently have a work situation. The way this works is that users connect to the public ip address of the DSL router and nat vpn traffic to an internal router. This router then forwards the traffic to the vpn server.
vpn client remote <=>{{internet}} <=>cpe <=>adsl router <=>vpn server
Now, Im implementation of a 2nd internet line with more or less the same configuration, but instead of an adsl cpe, we use a cisco router. When users need to connect even with the only difference being a different public ip address
client remote vpn <=>{{internet}} <=>cisco <=>router <=>router, vpn server
So, the only change in the prepective of cisco vpn clients is the host. However when testing, it didn't work. The vpn client times out. With something like 'the vpn peer did not' do not remember the exact error by heart. Now logic tells me that because he now works in the part between the internal router and the vpn gateway is ok. My guess is it's because of the cisco access list. I had my own list of access, but for some reason, I decided to use firewall SDM Wizard configuration and it generated this access list.
Expand the IP 100 access list
10 permit tcp any host 90.90.150.82 eq 4500
20 permit tcp any host 90.90.150.82 eq 500
30 permit tcp any host 90.90.150.82 eq 51
40 permit tcp any host 90.90.150.82 eq 50
50 permit tcp any host 90.90.150.82 eq 3101
60 permit tcp any host 90.90.150.82 eq 993
70 permit tcp any host 90.90.150.82 eq 587
80 permit tcp any host 90.90.150.82 eq smtp (722 matches)
90 deny ip 192.168.0.8 0.0.0.7 (20606 matches)
100 permit icmp any host 90.90.150.82 - response to echo (113 matches)
110 permit icmp any host 90.90.150.82 time exceeded (54 matches)
120 permit icmp any inaccessible 90.90.150.82 host (1051 matches)
130 deny ip 10.0.0.0 0.255.255.255 (726 matches)
140 deny ip 172.16.0.0 0.15.255.255 all
150 deny ip 192.168.0.0 0.0.255.255 everything
160 deny ip 127.0.0.0 0.255.255.255 everything
170 deny ip 255.255.255.255 host everything
180 deny host ip 0.0.0.0 everything
190 deny ip any any newspaper (5163 matches) Extended 100 IP access list
Given that the natting to the smtp protocol works, I think that the natting is ok. I ping the server vpn, so routing also seems to be ok. Vpn users receive a vpn ip address pool 192.168.x.x. is it possible that the 150 rule that prevents them to connect? I can't test, because it's a living environment and I'll have to plan a window. Im just trying to figure out what is wrong, so I can fix it for a window. Someone at - it ideas?
No, you don't need AH if your VPN policy does not include AH.
=>=>=>=>=>=>=>=> -
Access remote VPN question - hairpin
Hello, I did a search before posting this question but I have not found anything specific to my situation.
We have our ASA5520 configured in our main office to allow remote access Cisco VPN client users to access our network. We have a (network 192.168.1.0/24) remote desktop we have a configured on the same ASA5520 VPN IPSec tunnel that allows the use of internal users (in the main office) to access resources on the network remote (192.168.1.0) and vice versa. The problem is that when users connect to the remote VPN access, they are not able to access the resources of the remote office network. We created the nat0 ACL and labour, and split tunnel routing is implemented for users VPN remote network access (if I make a copy of the route on my laptop after connecting to the VPN, I see the road to 192.168.0.0/24 in my routing table). Routing everything is in place to do this, since the IPSec VPN tunnel is up and working. My suspicion is that the question has something to do with the consolidation of these VPN clients.
What else needs to be configured to work? Thank you.
Hi Scott,.
I have a client with a PIX 515E which allows connections to remote VPN and VPN LAN2LAN multiple connections.
We had this problem too... so what I made in my pix was:
TEST (config) # same-security-traffic intra-interface permits (its off by default)
If you use ASDM go to:
Configuration > Interfaces >
at the bottom of this page, there is an option that says: 'enable traffic between two or more host computers connected to the same interface '.
Check and it should work... I hope
I await your comments...
Kind regards.
Joao Tendeiro
-
Easy VPN with LDAP integration
Hello!
Currently I have an EASY VPN server on a Cisco 2911 with LDAP integration to authenticate the user.
Everything works well except for one aspect. When you try to connect to the VPN (IPSec Client), the user is prompted for the credentials that are in this case their domain credentials. When the user places the identification information is immediately invite you for it again and again for about 1 minute. Then their and the VPN is in place.
When I check the logs, I can't see him connect LDAP ranging down to connect to to the top.
My question is if there is a way to make the LDAP connection, stand or accelerate this process.
Thoughts?
Jason,
I had a long discussion with BU some time previously, if the LDAP protocol is in fact a taken AAA mechanism supported with ezvpn.
To which (at the time) they said 'no '.
We have therefore tabled a documentation bug:
http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCud35798
(which has not yet been resolved).
If it is in fact always a limiting factor, I suggest contacting your system engineer or open evidence of the TAC, so we can check with BU.
M.
-
Cannot access remote VPN site-to-site VPN
Internal network: 192.168.0.0/16
The remote VPN Clients: 192.168.0.100 - 192.168.0.254
Remote (L2L) network: 10.10.10.0/26
Remote VPN Clients are able to access the internal network without problem, but are unable to access the remote 10.10.10.0. Is it possible to debug this? "packet - trace" show no problem...
Hi Ben,
Please create a no. - nat on the external interface, because your customers to vpn-remote and remote-L2L tunnels are located on outside interface (i.e. from the outside). You should treat your outside network identical to your inside network, as you would create a no. - nat for your inside networks.
The ACL you create for the no - nat outside must be in both directions as below.
permit access ip 192.168.0.0 scope list outside_nat0 255.255.255.0 10.10.10.0 255.255.255.192
outside_nat0 to access extended list ip 10.10.10.0 allow 255.255.255.192 192.168.0.0 255.255.255.0
NAT (outside) 0-list of access outside_nat0
permit same-security-traffic intra-interface
Pls let me know, if this is useful.
Thank you
Rizwan James
-
Remote VPN with 5 domestic networks
Hello I have Cisco asa 5505 Adaptive Security
Here is my Sceniorio
ASA
Outside the Interface Eth0/0 - 155.155.155.x
Internal network - Eth0/1 192.168.1.1
Eth0/2 192.168.2.1
Eth0/3 192.168.3.1
Eth0/4 192.168.4.1
Eth0/5 192.168.5.1
ADDRESS POOL VPN = 10.10.10.1 - 10.10.10.10
If iam using Shrew Soft VPN software, so I want access to all these networks by remote VPN access, so please can someone give me a useful see link or give an idea how I can get this networks
Sorry I might be confusing in this case is your config ASA in fact: -.
Outside the Interface Eth0/0 - 155.155.155.x
Internal network - Eth0/1 192.168.1.1
Eth0/2 192.168.2.1
Eth0/3 192.168.3.1
Eth0/4 192.168.4.1
Eth0/5 192.168.5.1
??
If - then have therefore no need a layer 3 device, the SAA can be the payer 3 device if all of the above networks are directly connected.
-
problem with users to access remote vpn site to site vpn network
I did the Setup: asa 5510 configured remote access vpn. My vpn users receive asa 5510 range 192.168.50.0/24 addresses and users access my local lan 192.168.0.0/24. the second side of the local lan 192.168.0.0/24 on asa 5505, I did a vpn site-to-site with network 192.168.5.0/24.on that both sides of a site are asa 5505. inside the interface asa 5510 Elise 192.168.0.10 and inside the interface asa 5505 have address 192.168.0.17.third asa 5505 networked 192.168.5.0/24 address 192.168.5.1. I want my remote access vpn users can access resources on network 192.168.5.0/24. I create the static route on inside the asa 5510 static route 192.168.5.0 interface 255.255.255.0 192.168.0.17 and a static route on inside the asa 5505 static route 192.168.50.0 interface 255.255.255.0 192.168.0.10, but it's not working. What do I do?
execution of the configuration of my asa 5510 is
Result of the command: "show run"
: Saved
:
ASA Version 8.4(2)
!
hostname asa5510
domain-name dri.local
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
nameif outside
security-level 0
ip address x.x.x.178 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.0.10 255.255.255.0
!
interface Ethernet0/2
description Mreza za virtualne masine- mail server, wsus....
nameif DMZ
security-level 50
ip address 172.16.20.1 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns server-group DefaultDNS
domain-name dri.local
object network VPN-POOL
subnet 192.168.50.0 255.255.255.0
description VPN Client pool
object network LAN-NETWORK
subnet 192.168.0.0 255.255.255.0
description LAN Network
object network NETWORK_OBJ_192.168.0.0_24
subnet 192.168.0.0 255.255.255.0
object network 192.168.0.10
host 192.168.0.10
object service ssl
service tcp destination eq 465
object service tls
service tcp destination eq 995
object network mail_server
host 172.16.20.201
object service StartTLS
service tcp destination eq 587
object service admin_port
service tcp destination eq 444
object service ODMR
service tcp destination eq 366
object service SSL-IMAP
service tcp destination eq 993
object network remote
host 172.16.20.200
object network test
host 192.168.0.22
object network mail
host 172.16.20.200
object network DMZ
host 172.16.20.200
object network Inside_DMZ
host 192.168.0.20
object service rdp
service tcp destination eq 3389
object network DRI_PS99
host 192.168.0.54
object service microsoft_dc
service tcp destination eq 445
object service https448
service tcp destination eq 448
object network mail_server_internal
host 172.16.20.201
object service Acronis_remote
service tcp destination eq 9876
object service Acronis_25001
service tcp destination eq 25001
object service HTTP3000
service tcp destination eq 3000
object network VPNPOOL
subnet 192.168.50.0 255.255.255.0
object-group network PAT-SOURCE-NETWORKS
description Source networks for PAT
network-object 192.168.0.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object object admin_port
service-object object ssl
service-object object tls
service-object object https448
object-group service DM_INLINE_SERVICE_2
service-object object admin_port
service-object object https448
service-object object ssl
service-object object tls
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_3
service-object object admin_port
service-object object https448
service-object object ssl
service-object tcp destination eq smtp
service-object object tls
service-object object Acronis_remote
service-object tcp destination eq www
service-object object Acronis_25001
service-object object microsoft_dc
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object tcp
object-group service DM_INLINE_SERVICE_4
service-object object Acronis_25001
service-object object Acronis_remote
service-object object microsoft_dc
service-object tcp destination eq www
service-object tcp
service-object ip
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any object mail_server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any object mail
access-list Split_Tunnel_List extended permit ip 192.168.0.0 255.255.255.0 any
access-list outside_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.5.0 255.255.255.0
access-list DMZ extended permit object-group DM_INLINE_SERVICE_4 172.16.20.0 255.255.255.0 any
access-list DMZ extended permit object-group DM_INLINE_SERVICE_3 host 172.16.20.201 any
access-list DMZ extended permit object-group DM_INLINE_PROTOCOL_1 172.16.20.0 255.255.255.0 any inactive
access-list DMZ extended deny tcp any any eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
mtu management 1500
ip local pool vpnadrese 192.168.50.1-192.168.50.100 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static LAN-NETWORK LAN-NETWORK destination static VPN-POOL VPN-POOL
!
object network mail_server
nat (DMZ,outside) static x.x.x.179
object network mail
nat (DMZ,outside) static x.x.x.180
access-group outside_access_in in interface outside
access-group DMZ in interface DMZ
route outside 0.0.0.0 0.0.0.0 178.254.133.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record dripolisa
aaa-server DRI protocol ldap
aaa-server DRI (inside) host 192.168.0.20
ldap-base-dn DC=dri,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=dragan urukalo,OU=novisad,OU=sektor2,OU=REVIZIJA,DC=dri,DC=local
server-type microsoft
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
virtual telnet 192.168.1.12
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 195.222.96.223
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.0.14-192.168.0.45 inside
!
dhcpd address 172.16.20.2-172.16.20.150 DMZ
dhcpd dns x.x.x.177 interface DMZ
dhcpd auto_config outside interface DMZ
dhcpd option 6 ip x.x.x.177 interface DMZ
dhcpd enable DMZ
!
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy GroupPolicy_x.x.x.223 internal
group-policy GroupPolicy_x.x.x.223 attributes
vpn-tunnel-protocol ikev1 ikev2
group-policy drivpn internal
group-policy drivpn attributes
dns-server value 192.168.0.20 192.168.0.254
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-network-list value Split_Tunnel_List
default-domain value dri.local
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group drivpn type remote-access
tunnel-group drivpn general-attributes
address-pool vpnadrese
authentication-server-group DRI
default-group-policy drivpn
tunnel-group drivpn ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group x.x.x.223 type ipsec-l2l
tunnel-group x.x.x.223 general-attributes
default-group-policy GroupPolicy_x.x.x.223
tunnel-group x.x.x.223 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect tftp
inspect ip-options
inspect netbios
inspect icmp
inspect http
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:69c651e94663fc570b67e0c4c0dcbae1
: endrunning config asa 5505
Result of the command: "show run"
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password csq7sfr0bQJqMGET encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.5.0 PALATA
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.17 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 10.13.74.33 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
object-group service DM_INLINE_SERVICE_1
service-object ip
service-object tcp
service-object icmp echo
service-object icmp echo-reply
service-object tcp eq domain
service-object tcp eq ldap
service-object tcp eq smtp
object-group service DM_INLINE_SERVICE_2
service-object ip
service-object tcp eq domain
service-object tcp eq www
service-object tcp eq https
service-object tcp eq smtp
object-group service Sharepoint8080 tcp
port-object eq 8080
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any
access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 192.168.0.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list inside_nat0_outbound_1 extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
pager lines 24
logging enable
logging asdm informational
logging mail errors
logging from-address
logging recipient-address level debugging
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound_1
nat (inside) 1 192.168.0.0 255.255.255.0
static (inside,outside) 10.13.74.35 192.168.0.22 netmask 255.255.255.255
static (inside,outside) 10.13.74.34 192.168.0.20 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.13.74.1 1
route inside 0.0.0.0 0.0.0.0 192.168.0.17 tunneled
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication telnet console LOCAL
http server enable
http 10.13.74.0 255.255.255.0 outside
http 192.168.0.0 255.255.255.0 inside
http 10.15.100.0 255.255.255.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
virtual telnet 192.168.0.53
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_2_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 10.15.100.15
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group 10.15.100.15 type ipsec-l2l
tunnel-group 10.15.100.15 ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
!
service-policy global_policy global
smtp-server 173.194.79.109
prompt hostname context
Cryptochecksum:4767b6764cb597f0a7b8b138587d4192
: endThank you
Hello
I have previously edited the my initial response was in fact not necessary since you were actually using full Tunnel
EDIT: Actually just noticed the the VPN client isnt using Split Tunnel. Its Full Tunnel at the moment since it doesnt have the "split-tunnel-policy tunnelspecified"
So you don't really have any of those.
Please mark the question answers and/or assess response
Ask more if necessary
-Jouni
-
Remote VPN with PIX without access to the local network
Hi @all,
I ve running into problems and I have not found any solution. Can someone check my config?
Facts:
PIX 501 6.3 (3)
4.04 VPN client
Wanted solution: access to HO via VPN
VPN tunnel will be established, I get an IP address, but I can´t the systems behind the pix and the pix of access itself.
To the VPN Client Staticts, I see outgoing packets, but no entrant (if I send a ping to peer behind the pix)
I hope someone can help me
Attached is my config:
PIX 501 and 506/506e pix are not supported in v7 due to the fact that the cpu is not able to deal with the extended features of v7.
PIX 520 is not supported I guess it's because of the fact that the model is discontinued.
-
Divide access remote vpn tunnel ASA 5520
Hello
I'm setting up a vpn for remote access with split tunnel, but I use an acl extended to match a host and http to destination port, but does not work.
Scenario of
Distance access(10.0.0.122/24)--internet---Cisco ASA(inside:192.168.10.1/24)---ip = 192.168.10.6 - C6509 - 10.0.0.254/24---hote = 10.0.0.31/24
The plot is when I activate the IP service connection or flow ICMP worked. Does anyone have an idea what is the problem? Thank you
Concerning
Split tunneling does not take into account the port information you specify in the ACL, he doesn't care the ip address/network you defined.
If you want to restrict access to ports and IP, you must define your split tunneling with only ip addresses and using a vpn-filter acl in group policy to restrict following the specific ports that you want:
split_acl ip access list allow
access-list allowed filter_acl ip eq
attributes of group-pol
Split-tunnel-pol tunnelspecified
value of Split-tunnel-net split_acl
VPN-filter value filter_acl
-heather
-
CIsco Anyconnect VPN with LDAP AAA
Hi there, I was hoping that someone can point me in the right direction here. I created a VPN connection profile to match anyconnect SSL entering customers. I would like to use LDAP group membership as a sine qua non for authentication. I found a few online pages on what to do about it, I followed. Unfortunately, it seems my connection profile to allow access to any user in the ldap, not only those of the ldap group database. I'll post the relevant bits of the config here in hopes that someone can point my mistake!
The idea of the config is to have the map of connections 2 by default a noaccess policy which has 0 simultaneous connections and the profile card (SSL_VPN) connection ssl to anyconnect to group_policy_SSL_VPN group policy.
local pool CONTOSOVICVPN_DHCP_POOL 10.0.5.51 - 10.0.5.254 255.255.255.0 IP mask
NAT (inside_int, any) static source NetworkGroup_Internal_networks NetworkGroup_Internal_networks Network_VPNRANGE_10.0.5.0 Network_VPNRANGE_10.0.5.0 non-proxy-arp-search of route static destination
LDAP attribute-map AuthUsers
name of the memberOf Group Policy map
map-value memberOf memberOf CN = NETWORK_CONTOSO_ASA_VPN_DLSG, OR = network, OU = resources, OU = CONTOSO, OU = security, OU = Groups, DC = CONTOSO, DC = groupynamic-access-policy-registration DfltAccessPolicy
AAA-server CONTOSOVIC_LDAP protocol ldap
AAA-server CONTOSOVIC_LDAP (inside_int) 10.0.0.45
LDAP-base-dn DC = CONTOSO, DC = group
LDAP-group-base-dn DC = CONTOSO, DC = group
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = ASA_LDAP_USER, OU = network, OU = accounts, DC = CONTOSO, DC = group
microsoft server typeNo vpn-addr-assign aaa
No dhcp vpn-addr-assignSSL-trust ASDM_TrustPoint4 outside_int point
WebVPN
Select outside_int
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal NoAccess group strategy
Group Policy attributes NoAccess
WINS server no
VPN - concurrent connections 0
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
value by default-field CONTOSO.group
disable the split-tunnel-all dns
attributes of Group Policy DfltGrpPolicy
VPN - concurrent connections 0
client ssl-VPN-tunnel-Protocol ikev1 l2tp ipsec
internal GroupPolicy_SSL_VPN group strategy
attributes of Group Policy GroupPolicy_SSL_VPN
WINS server no
value of server DNS 10.0.0.45
VPN - connections 1
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
value of group-lock SSL_VPN
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_SPLIT_TUNNEL
value by default-field CONTOSO.group
activate dns split-tunnel-all
the address value CONTOSOVICVPN_DHCP_POOL poolsattributes global-tunnel-group DefaultRAGroup
authorization-server-group CONTOSOVIC_LDAP
NoAccess by default-group-policy
authorization required
tunnel-group DefaultRAGroup webvpn-attributes
message of rejection-RADIUS-
attributes global-tunnel-group DefaultWEBVPNGroup
NoAccess by default-group-policy
type tunnel-group SSL_VPN remote access
attributes global-tunnel-group SSL_VPN
address CONTOSOVICVPN_DHCP_POOL pool
authentication-server-group CONTOSOVIC_LDAP
authorization-server-group CONTOSOVIC_LDAP
Group Policy - by default-GroupPolicy_SSL_VPN
authorization required
tunnel-group SSL_VPN webvpn-attributes
message of rejection-RADIUS-
Proxy-auth sdi
enable CONTOSOvicvpn.CONTOSOgroup.com.au group-aliasYou must specify the NoAccess group policy as group policy by default for the Group of the SSL_VPN tunnel.
Remember to rate helpful answers. :)
-
IPSec remote VPN with VPN client in error
Hello
ASA 5505 configuration is: (installation using ASDM)
output from the command: 'show running-config '.
: Saved
:
ASA Version 8.2 (5)
!
hostname TESTSelect _ from encrypted password
_ encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
sap_vpn_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool test_pool 192.168.10.0 - 192.168.10.20 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.132 inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal sap_vpn group policy
attributes of the strategy of group sap_vpn
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list sap_vpn_splitTunnelAcl
username password encrypted _ privilege 0 test
username test attributes
VPN-group-policy sap_vpn
Username password encrypted _ privilege 15 TEST
type tunnel-group sap_vpn remote access
tunnel-group sap_vpn General-attributes
address test_pool pool
Group Policy - by default-sap_vpn
sap_vpn group of tunnel ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:b67cdffbb9567f754052e72f69ef95f1
: endI use customer VPN authentication with IP 192.168.2.20 host group with username:sap_vpn and key pre-shared password but not able to connect to the vpn and the error message attached.
ASA, set up with the initial wizard ASDM: inside the interface IP 192.168.1.1 (VLAN1) and outside (VLAN2) IP 192.168.2.20 assigned by using DHCP. I use outside interface IP 192.168.2.20 to HOST IP to the VPN client for the remote connection? is it good?
Please advise for this.
Hello
What train a static IP outside? We need a static IP address to connect, please try again and let us know how it works?
Kind regards
Maybe you are looking for
-
change in behavior of the button home and end
HelloI have a problem with the behavior of the home, end, PG. PREC, PG. next and arrow keys. After that I have upgraded to version 6, they do not work as expected.I disabled each extension and the behavior is always the same... They work as intended
-
Z510 - performance graphics card
I have Lenovo Z510 and supported with NVIDIA GEFORCE 740 m and intel HD 4600 (2 GB total), 6 GB of RAM and 1 TB of HARD drive. When I play a HD game on battery performance of the demotion of the card and the game move slowly so that when I run it on
-
installation of autocad lt 97 in vista
I tried to install "Autocad: LT97" in vista in all of ' windows 95, 98, xp and still get the same, "this program isn't 64 bit compatible ', consult the manufacturer." " Autodesk, said 'lt97' cannot be run in 64-bit and they do not offer a solution.
-
I can't loggin normally, I give myself a temporary account
I turn on pc enter my password and try to loggin, after awhile it says (preparing your desktop) and then I get a message saying that I have received a temporary account, it said to look in the event log or check with the administrator. Windows resto
-
Computer runs continuously check disk and automatically goes into power saving mode.
2 days ago my computer was working fine, then yesterday he wanted to run the check disk at startup upward. Finished, he found no errors and proceeded to vista loading which then stated that he was going to power saving mode, the screen went black and