Action Builder is not displayed in the Tools Menu

Similar Questions

• Recently opened progams are not displayed on the start menu

  Original title: my most recently opened PROGRAMS are not displayed n the Start Menu-Vista ultimate__

  Hello, Im under Vista Ultimate SP2 [32 bit] and what ever updates etc, there is so much current im.  Suddenly the list on the left side of the Start Menu [under the waiting list] shows all the programs that have been recently opened/used. It allows to view, obviously Ive done something along the way but don't can't seem to retrace my steps back far enough. Clicks to memorize and display properties are all not verified so no problem there.  Can someone please help with this annoying problem. May thanks, has soon.

  Type regedit in the start search. Access
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  and delete
  NoStartMenuMFUprogramsList
   
  --
  ..
  --
  "kenhankanen" wrote in message news: c0fac7b4-ec95-4c3b-8345-eb202323410c...
  > Bindu thanks for your reply, but I had tried these steps much earlier on
  > and are the most obvious that can be made. I was expecting something
  > more technical, if necessary, as perhaps a reg key has been changed and can
  > be reset but I am sure that is it might have been, or if in fact it is
  > the cause. I'm sure its base [other Quen exhibited obvious steps]
  [> above], but can't seem to find it in one of the preferences or
  > configuration in the control panel settings. other than furthere ideas
  > create a new user account?
  >
  > Thanks again for your time and help.
  >
   
   

• VI Analyzer does not appear in the Tools menu

  According to this formum message of the VI analyzer is available in normal LabVIEW. (Without most of the tests and no right click in the project, but it's there.) But I can not find it in the Tools menu, which is where it should be. (A printscreen is in this post of the forum).

  My response to the first message, I would have found the menu. But now I searched in LabVIEW 8.6, 2012 and 2013 without finding it. The llbs are there in /project/_VI Analyzer, but nothing is in the tool menu. Why not?

  If you place your test LLBs in the folder [LabVIEW Data] \VI Analyzer of test , they should appear in all of your LabVIEW installations without requiring the installation of the VI Analyzer Toolkit (in LabVIEW 8.6 and later). Make sure that the test is stored in the first version of LabVIEW, you want to support. On Windows 7, the [LabVIEW Data] folder is here:

  Data C:\Users\[username]\Documents\LabVIEW

  If you're still having problems, let me know what specific tests that you are trying to use, and I can make sure that there are no problems with the tests themselves.

• Management of libraries of button does not appear under the Tools Menu

  The documentation available on SQL Developer Concepts and the use of the States that there is an item on the Tools menu, called "Manage libraries" in order to manage the connections databases Non-Oracle. I don't have such an item in the Tools menu.

  I'm under Oracle Sql Developer 4.0.1.14. I even tried to install an older version, and it doesn't have this option or the other.

  Any help is greatly appreciated.

  I checked my installation of JDeveloper, and this menu option is there. It is used to manage the Java libraries in general and has nothing to do with JDBC.   SQL Developer documentation is wrong.

  I already pointed you to the Preferences section to manage third party JDBC libraries and the Division helps. If you don't want that follow, then you are on your own.

  Note that DB2 / iSeries is not a third party database supported in SQL Developer.

• Chosen PS Actionoption 'Color' is not displayed in the window menu drop-down

  Hello @ all!

  I would like to divide my PS actions with different colors. But if I choose one in the option field is not dispales in the window drop-down action menu.

  What have I done worng?

  Concerning

  Helmut

  Hi Helmut,

  You must change the display Palette of action mode button mode to see the colors assigned to your actions.

  

  Kind regards

  Claes

• MS Office 2010 files are not displayed in the recent Menu startup with Vista list

  How to view in the recent Menu list starting with Vista 64 bit, MS Office 2010 files

  Please post on the forum Windows 7: performance and Maintenance section
  http://social.answers.Microsoft.com/forums/en-us/w7performance/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• AppTabs option does not display in the context menu.

  The instructions State:

  Right-click on the tab you want to turn it into an App tab and select Pin as App tab in the menu.

  But when I right click, the menu that does not have this option. Is it possible that one of my modules or plugins is the neutralization of him?

  I have a screenshot, but I do not see how to add it to this form.

  You seem to have extensions that have changed this context menu, check this via the options of each of them.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• the printer test page does not print in the Tools menu under Windows 7 64-bit

  I have printing OfficeJect 910n 8500 a install wireless. The XP machine can see the printer and can the printer through the web server in the printer test page. 64-bit Windows 7 system allows you to print to the printer without problem but unable to print the test page printer through the web server built into the printer. Windows 7 use IE9, XP use IE8. The indices here / thank you

  Found the answer! I had to upgrade the built-in server to use compatibility mode in IE9. Worked fine in Chrome, so it was not the firewall or network configuration.

• Yahoo mail display - action buttons like response, delete, before them and the colors are not displayed. The solution to "clear the cache" does not help.

  The foregoing summarizes. Guests for action was now small boxes with a number and a letter of the alphabet. I used the "empty the cache" and solutions "allow pages to use their own police." neither one worked. This figure includes re-start after that I tried the solution.

  You have the problem where rectangles appear with two rows of two characters in them? This can happen when Firefox cannot display a custom font to view icons.

  Could check you if you allow sites to use their own fonts?

  the button Firefox orange (or the Tools menu) > Options > content > "Colors and fonts" section > advanced

• I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu.

  I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu. I'm on a Mac Pro 2013. Latest version at all.

  Looks like without the audio element is a nested element.  You will need to restore the audio signal in order to see the wave forms.

  I have the same problem (sometimes):

  https://forums.Adobe.com/message/8527998#8527998

  Without rhyme or reason, as far as I can tell.

• Plug-ins not on the tool menu

  Since the upgrade to FF6, FireFTP is not in the Tools menu. I go to the Add-ons Manager, and that's where and activated. I turn off, restart, it is displayed as disabled. I re - enable, restart Firefox and once more, it shows an active. However, it is not in the Tools menu. What gives? I REALLY need that increase the power of work!

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• not displayed in the Control Panel folder options

  I want to display hidden files, but the "folder options" icon is not displayed in the Panel, is not available under 'Tools' in the folder.  All the answers as to why?

  This can be caused by malicious software.  You should download, install, update and scan with both free scanners:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  You may be able to repair the damage by performing the part of the file, line 129, left reg here: http://www.kellys-korner-xp.com/xp_tweaks.htm read the instructions at the top of the page.

• Microsoft Teredo Tunneling adapter not displayed in the window of adding hardware under common hardware Types.

  I have a HP Pavilion P6 desktop computer running Windows7 and in devices and printers , I noticed that my computer has a yellow triangle that relates to Microsoft Teredo Tunneling adapter.  To address this issue, I note that this device is not displayed in the window of adding hardware under common hardware Types, but I listed it in the Device Manager.

  I tried several attempts to reinstal, but not joy.  Can anyone suggest how I can restore this device?

  In the Properties window, it shows a Code 10.  This device cannot start.

  DM

  Tunneling is required only if you have a printer that requires it.  Here is how to re - install if you do

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.

  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices. If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

• PDF pages are not displayed in the browser ex 11 windows 7

  PDF pages are not displayed in the browser, ex 11 windows7

  The problem was IE version 8-11, EPM (improved Protection Mode) must be disabled.

  Tool, Internet option, advanced, uncheck the box EPM, restart.

• The State of function keys is not displayed on the screen

  Hi... Please help me.  I m havin lenova ideapad s10 - 2 netbook. In the present when I press fn + function keys action is performing, but his status is not displayed on the screen. So, if I want to spend on WLAN when I press fn + F5 screen does not appear. Usb devices are not detect my phone. Please help me...

  Thank you

  Hello and welcome,

  You can try to re - install the driver included in the establishment of lenovo

  cordially KalvinKlein