UCS Manager 2.0 (1W) read only role grayed out

Similar Questions

• Read only role

  Hello

  I have USR_TEST user in my database:

  USERNAME ACCOUNT_STATUS

  ------------------------------ --------------------------------

  OPEN USR_TEST

  and this user is to have these privileges:

  HOLDER OF PRIVILEGE

  ------------------------------ ----------------------------------------

  USR_TEST UNLIMITED TABLESPACE

  USR_TEST CREATE SESSION

  CREATE TABLE USR_TEST

  I have another user in my database named TEST :

  USERNAME ACCOUNT_STATUS

  ------------------------------ --------------------------------

  OPEN TEST

  now, I want to TEST user to read only user USR_TEST privileges, means TEST user must have read access only to items of the user USR_TEST . Please let me know how I can do this. And please correct me if I am wrong somewhere.

  Kind regards

  MIchel.

  sqlplus usr_test

  coil capture.sql

  Select "grant select on USR_TEST." | table_name | "at the TRIAL;" FROM USER_TABLES;

  SPOOL OFF

  now take capture.sql to the new DB & do as below

  sqlplus system @capture.sql

• Get-journal authorized to perform this operation by using read-only user role, was refused.

  Hi people,

  What is the minimum role to get the newspaper my whole army ESX?

  I use the following script oneliner:

  Get-VMHost | Get-Log messages | Select -ExpandProperty Entries | Where {$_ -like "*error*"}
  

  but it always ends in failure result:

  Get-Log : 05/07/2011 9:15:11 AM    Get-Log        Permission to perform this operation was denied.    
  At C:\Temp\a5440b5a-6f5a-4fe2-9027-e432ba87c869.ps1:3 char:21
  + Get-VMHost | Get-Log <<<<  messages | Select -ExpandProperty Entries | Where {$_ -like "*error*"}
      + CategoryInfo          : NotSpecified: (:) [Get-Log], NoPermission
      + FullyQualifiedErrorId : Client20_RuntimeDataServiceImpl_GetAvailableLogList_Error,VMware.VimAutomation.ViCore.Cmdlets.Commands.GetLog
  
  
  

  Any suggestion please?

  Permission can be derived from the API method used by the cmdlet Get-Log under the covers.

  In the description of the BrowseDiagnosticLog method, you will see that it takes the Global.Diagnostics .

  The default read-only role does not have this privilege!

  You will need to create a new role.

  The other point to watch is the location in the structure of vSphere where give you permission.

  I feel that this specific one should be given to the root of the vCenter to allow access to newspapers.

• What is the role of the minimum user for executing script CLI power read-only?

  Hi all

  I would like to know what is the exact role to perform the read-only query using Powershell?

  so that I can use it in the construction of my script seen in production datacenter to run Get-* cmdlets of command rather than the Set-* feature of command.

  Built-in read-only role should normally be sufficient for reporting.

• SOA Suite read only the console in 11g

  Hi all
  
  Is it possible to create a user with read only role on EM 11g? We want to create a user to monitor the production environment to have options to deploy/undeploy.
  
  Thank you.

  By assigning a role to a user, you can restrict its access-

  http://download.Oracle.com/docs/CD/E17904_01/integration.1111/e10226/appx_roles_privs.htm#BABIHDFJ

  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/e13747/secroles.htm#i1206135

  Kind regards
  Anuj

  Published by: Anuj Dwivedi on February 22, 2011 21:12

• Grant read only to a user only with the role

  Legends of dear,

  Req: create user selection/read-only join specific 3-5 tables in a specific schema and no selection/read only access to the sys/system schema.

  After surfing and tried to grant the "read-only" access for a user as follows.

  create user readonly identified by readonly123;

  create read_only_role role identified by read_only_access;

  Grant connect, read-only resources.

  Grant select on applications. FND_PRODUCT_GROUPS read-only;

  Grant select on applications. FND_USER read-only;

  grant read_only_role read-only;

  The above statements

  1. created user, role

  2. granted to connect/create user session and I am able to run the following query

  logged in as readonly

  Select * from APPS. FND_PRODUCT_GROUPS;

  Where I am able to select even sys or system tables.

  But I'm not able to make the same read only access provided to a role and assign the role to the user subsequently,.

  create user readonly identified by readonly123;

  create the role of read_only_role identified by read_only_access;

  Grant connect to read_only_role;

  Grant select on applications. FND_PRODUCT_GROUPS to read_only_role;

  Grant select on applications. FND_USER to read_only_role;

  grant read_only_role read-only;

  Let me know your suggestions,

  Ref:roles and privileges of user management

  Roles of the Oracle

  GRANT statement

  https://forums.Oracle.com/thread/2223362

  Thank you

  Knockaert

  Hi, Karthik,

  If a role has a password (as in this case), then the user must activate this role during its current session in order to to use, like this:

  ROLE of the read_only_role IDENTIFIED BY read_only_access VALUE.

  If the role does not have a password, then it is enabled by default as soon as the user opens a session.

  Remember, the roles do not count inside procedures AUTHID DEFINE stored (which is the default type).  If you need to use the table inside an AUTHID DEFINER stored procedure, then the privileges must be granted directly to the user and not just a role.

  I hope that answers your question.

  If this isn't the case, after a complete test script that people can run to recreate the problem and test their ideas.  You started great: CREATE instructions you posted were perfect, but you need to add the CONNECTIONS and SELECT statements (and the SETTINGS, if necessary) to show how the error occurs.

• Manage the editable elements to read only by Backing Bean!

  Hello
  
  Updating JDeveloper/ADF 11 g 2
  
  I find that how to handle the editable by any listener action elements against button/link/object such solution.
  
  Details:_
  
  Suppose I have a table EMP VO entry form and want to show as read that during the form load, but when I will enter / click on a button (created manually) to change all items will be changed to edit. and after the present and commit files then everything appears as read-only.
  
  I want to manage read and editable only receding from class / listener of the action to change the button (created manually) . Is this possible? If possible, please give me such a solution.
  
  Please help me.
  
  Zed
  ===

  OK, here you go:
  Code of the bean (put the bean in the flowrate of session or page range):

  package demo.clickenable;
  
  import javax.faces.event.ActionEvent;
  
  import oracle.adf.view.rich.component.rich.input.RichInputText;
  
  public class ClickEnableBean
  {
      Boolean enable = Boolean.TRUE;
  
      public ClickEnableBean()
      {
      }
  
      public void setEnable(Boolean aEnable)
      {
          this.enable = aEnable;
      }
  
      public Boolean getEnable()
      {
          return enable;
      }
  
      public void flipEnable(ActionEvent actionEvent)
      {
          if (getEnable().booleanValue())
              setEnable(Boolean.FALSE);
          else
              setEnable(Boolean.TRUE);
      }
  }
  

  JSPX page:

  The real work is done by a partial trigger button (id = box). This trigger is used to update the panelGroupLayout now the text input fields that are enabled/disabled via the Boolean value of the bean. Each click on the button toggles the Boolean value and updates the page.

  Timo

• UCS Manager & Vmware

  Hi guys,.

  Before we set our Cisco UCS solution in we have Vmware running with Nexus 1000v switch. After the installation of the Cisco UCS solution, we migrated a lot off the coast of the old system to the new. By reading the manual on setting up vCenter, Port and VMS profiles in UCS Manager, it seems that this creates a new on the nexus 1000v vsm. Anyway is to import what we have so that we see in the UCS Manager?

  David, the functionality of the UCS you speak is known as VN-Link in the material while the Nexus 1000v is known as VN-link in the software. Installation and configuration is very similar to the Nexus 1000v but they are separated distributed virtual switches.

  Unfortunately, you can't use both because they require the VEM loaded on ESX hosts and the UCS VN-link requires a login policy dynamic UCS vNIC. If you use the 1000v, you will not be able to use the VM tab in UCSM and you will not see anything on the virtual computers tab on a Service profile.

  In my opinion the Nexus 1000v is preferable because is offer more features, more scalable and is managed/set NX - OS. Of the UCS VN-link option also limits the number of virtual machines, you can run on a host computer, because the dynamic vNIC takes in charge a maximum of 56 depending on how rising your chassis to your FIs. If you have only 2 uplinks of your chassis then the max machines virtual host when using the UCS VN-Link is 20-24, according to the number of vNIC ESX host, you create as part of your Service profile.

• UCS Manager 2.2 - LDAP authentication

  Hello

  I have some general questions about authentication LDAP and UCS Manager.

  I hope it's unterstandable...

  We have the following structure:

  • DC = Company.domain.com
    • OU = Domain Administration
      • OU =Administrators
        • UO = Germany
          • CN = User1-SMA
          • CN = SMA-user2
      • OU = Test-UO
        • CN = ucstestuser
        • CN = ucsadmingroup--> Member = SMA-user1, user2-SMA
          

  I added an LDAP provider

  binduser is the SMA-User1

  Base DN = OU = Domain Administration, DC = company, DC = domain, DC = com

  attribute = empty

  filter = sAMAccountName = $userid

  password for User1 SMA

  group permission / recursive enabled.

  I have not add some attributes or map the group. Now I can connect with ucstestuser (read-only), but not with SMA-user1 user2 SMA oder.

  If I add ucstestuser to ucsadmingroup a map of this group, ucstestuser can access and have right to admin, ADM-user1 and user2-adm cannot access (user authentication failed).

  I don't understand, why ucstestuser can access and other users in a different OU not. Unique database name is domain Administration, so that UCSM should see all three users, not?

  Can anyone help? Thank you.

  / Danny

  With UCS remote authentication when a user connects using a temporary account on the FI as a UCS-MyAuthDomain\myusername, which is limited to a total of 32 characters.  If you shorten the name of domain authentication defined in UCSM domain.com to a shorter name as AD, it will allow for the use of a username any longer.

  Note

  For systems using the remote authentication protocol, the authentication domain name is considered to be part of the user name and the limit of 32 characters for usernames created locally. Because Cisco UCS inserts 5-character formatting, the authentication will fail if the name and the user character domain name combined total is greater than 27.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config/Guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_1_chapter_01000.html

• Profile of preferences given to 'Read only' after having turned it off.

  I can't start Firefox. He said: it is already running. The Task Manager shows all running instances. There is no "parent.lock" file '... default' folder. Every time I look at the preferences for the 'profile' folder, it shows 'read only' is defined. I erase it and next time I look at the 'read only' preferences is set.

  I uninstalled and reinstalled Firefox but it always resets "read only". Looks like the profile folder has something corrupt in it.

  Only a check mark in the box read-only means that a file or folder is read-only.
  
  Windows does check all files in a folder displays, instead of a green block to indicate that it is not safe.
  
  Always look at the files individually.
  
  Easier to do, it's to make the visible attributes in the mode "view details >": choose details in Windows Explorer.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls
  • http://KB.mozillazine.org/Browser_will_not_start_up

• Permissions on removable SD card Android AT200 value read-only

  Recently, removale on my at200 SD card has been set to read only for the applications of all but a few. This means that when you change or try to save, copy docs on the SD card, I get the message "not enough of permissions. Any amendment of these applications requires transfer of files on SD card and back again.

  Toshiba queue manager is able to rw OK, but my other file manager fails, along with ezy PDF.
  Read the attributes of the issuance of the RW value for data.p (permissions XML) SD card. But looking at the poster file manager information sdcard directories and files value dr - or - r-.

  Is it possible to get this changed to allow access to all of my installed applications? Or even some?
  See you soon
  RABEL

  Hello

  Reading your post, it seems that your question has nothing to do with AT200 material, but with the permissions that are defined in unique Android applications.
  I think you should check the Android support forums for more details on the unique demands and how to change the permissions for these applications.

• After backup: Destination is read-only?

  I'm working on implementing a backup procedure appropriate as recommended by most of the experts on this forum. But when you try to save a large amount of data, I get this error message:

  Backup: Backup error 'data to USB_HDD_4' job: destination is read-only.

  Data, at first sight, seem to be copied on the USB drive.
  I tried this on 3 different drives, including the brand new out of the box 2. So I do not think that they would all be defective. This makes me think that it is either a problem with my data on the NAS or a problem in the FrontView backup procedure.

  When I connect the drive to the computer and remove the directories manually, for some files with names very long and a deep path, I get an error message ' Source path too Long ":

  
  That's why I'm currently suspect file names very long or very long paths, but I do not know if it is really what is the cause.

  I removed a few directories that I suspected of the SIN, but in the next backup, the message continues to come back. So now I'm stuck in a catch-22 situation. I don't know if my backup succeeds and do not want to delete all the data more than the SIN, because it can not saved correctly. So I am not able to set up a procedure of backup appropriate right now.

  Has anyone found the root causes of the message "Destination is read-only?
  Is it possible that I can get more information about what happened during the backup (for example, this file is causing the message)?

  Have searched for a solution to this problem for a long time, but never managed to find the root cause.

  In the end, I decided to remove the offending subdirectory containing a backup of a Windows system files. This solves the problem with the backup procedure.

• chedsk - said paramiter 'F' not set to read only.

  I receive a notice to run chedsk - I run it and it says 'F' paramiter not defined in read-only. How to fix the 'F' param?

  I receive a notice to run chedsk - I run it and it says 'F' paramiter not defined in read-only. How to fix the 'F' param?

  ===========================================
  Reach... Start / desktop right click on the drive in question...
  and choose... Properties / Tools tab / section error checking.
  Check the button now... Check both boxes / start button.

  If you run chkdsk on your system drive, it will run the
  next time the computer is restarted. If chkdsk is set to run
  another partition or an external drive, it will run while Windows
  is still ongoing.

  If chkdsk detects and repairs them mistakes... run it several times until what no.
  errors are detected.

  The chkdsk log file located at the following location.

  Control Panel / Administrative Tools / computer management.
  System tools / Event Viewer / Application / Winlogon

  (Winlogon will be found in the Source column)
  (double-click the entry to display the journal)

  See the following article for more information:

  (315265) how to perform disk error checking in Windows XP
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315265

• 'Read only' files impossible to remove. Compensation in 'Read only' window made no difference

  Was a reference to the file manager but file manager does not come with XP 2.     Any suggestions

  Prior to the observation of your message, I went into Nero and managed to delete all the files read-only.

  I then tried to copy the word from the C drive files but I received a message stating that the drive is not formatted.     I then formatted the disc according to the prompt and I was able to copy the disk and then was able to clear without problem.

  I really appreciate the time that you have provided to help me.

  Thank you

  Concerning

• How can I change from read-only smart media card?

  Card must be reformatted but says that it cannot format because it is read-only.

  The instructions say that I cannot change the read-only but doesn't mean me how.

  Any help in this matter will be greatly appreciated.

  Skip a Pat

  Hello

  1. which card Media do you use?

  2. you receive an error during formatting?

  3. What is the brand of the Media card?

  4. were there any changes made to your computer before this problem?

  I suggest you try the methods mentioned below and check if it helps:

  Management of disk access by

  By clicking Start (orb)> Control Panel> Administrative Tools> computer management>disk management. Disk management should list drives/cards connected to the system and also to show what type of file system they are and whether they are healthy or not. I would just reformat the card, do not change the type (example: FAT, FAT32, or NTFS) file format for doing so, your camera or device may not recognize.

  Hope this information is useful.