Action Loop

Similar Questions

• Put a layer of the action on a layer with a "clickTAG" element

  Hello

  I'm doing some research on the creation of clcikTags. I read some places that the clcikTag is on the top layer.

  Which was fine, but now I want to loop and I used to put my actions in the upper layer. This will cause a problem? I'm better off-putting just my action loop on the last keyframe on the layer of clcikTag?

  Thank you!

  Babs

  ActionScript layers are not relevant to the interaction of the user.

• CAA allows a single repository for a flow test video?

  R & D control devices of video "decoder" I want to start internal treatment of our TESTED device, then using a PXI-1491 to analyze video output digital (HDMI) of the object to be measured for a large number of seconds (180 seconds or more for example).

  The video that is being analyzed will have content static image. The amount of time I want to analyze the test data flow after doing some stuff on the object to be measured is variable, but I always expect it to be quite long.

  Currently, it seems that I have a stream of reference containing exactly the same number of images that flow of test data.

  This makes the reference vbf very large files. My test needs include a large number of resolutions that must be tested through the object to measure. With an extensive library of vbf very large files is logistically difficult, it would be much easier to maintain such a library made up of records of reference unique framework "Golden" instead.  Also, since my analyze the needs of variable time depending on the test configuration and USE treatment options, it would be better for me to have a single reference or frame and validating a large number of images of test against it.

  Given that the analyzed video will have static images, it is possible to run a video stream test against a framework unique (reduced reference) instead of having a complete reference stream frame by frame?

  Do exactly what you ask is not the design of the CAA.  Of course, the best solution that we recommend when working with video test is a high-capacity hard drive, probably in a RAID configuration for more space and better performance, then just take a reference however with 10 k images and do what you originally suggested.

  A method to achieve what you are looking for without using a big reference file is, thanks to the treatment in offline mode.  Allows you to acquire 10,000 consecutive images, what I understand is one of your concerns, and then afterwards run it through the parser.  You'd still be a type of action loop TestStand and LabVIEW.  The process would be:

  (1) acquire your your provider source 1491 with none of the processors and registration of the media stream to the disk.

  Loop:

  (2) loading CAA with the provider buffer of disk instead of the 1491, the buffer to the disk file will be the acquisition by the top

  (3) point the boot image to your current location.

  (4) perform your processor with the results.

  (5) repeat and iterate to a new location of boot image

  This process will be much slower that you load and unload resources every time.  If you choose to go in that direction, a better implementation would be to perhaps consider a 100 images at once, or a number greater than 1, because the processing time for handling additional images will be less loading and unloading PQA.

  Your second option will require more work outside the AQP to implement custom through a personalized user processor features.  Actually allows you to find a way to treat the incoming data in ways you would like.  To do this, you will need:

  (1) LabVIEW 2011 - personalized by the user for CAA treatment cannot be developed in LabVIEW 2011.  If you are under contract of SSP by OR and not only 2012 LabVIEW for the moment, you still have access to older versions.

  (2) vision Development Module - for your image processing

  (3) a video source unencrypted - due to the limitations of the HDCP, we cannot expose the treatment of the user of raw video stream.

  You would in this user processor:

  (1) load as your static frame in directly, you wouldn't need to use media Ref input

  Loop

  (2) load the current image of the incoming video table

  (3) measure your video with the Vision, probably PNSR or SSIM function since they are currently measures only 2 referenced in CAA.

  Learn more about Custom User Proessor had, in the CAA to help discover: NI CAA Executive and Board Configuration OR PQA > NI PQA tabs > tab processors > customizable output processors > processor as user: http://digital.ni.com/public.nsf/allkb/514058CC830D86EE86257881004CB45F

• OSB: Citing several endpoint URI or business at the same time

  Hi all
  I want to route the request to two point endpoint URIs or services using the OSB.
  
  For example, I have a BPEL that is deployed on two servers. You use this I have to call the service deployed in both servers as soon as I get input.
  
  Help, please.
  
  Thanks in advance

  Yes you can.

  1. place the URIs in an xml file. Save the XML as a resource of xquery to say URICollection.xquery.
  2 set this URICollection.xquery to say variable URICollectionVariable.
  3 extract the URIs desired using a URICollectionVariable xquery query. Two URIS can be stored inside of a parent element, which can appear as a result.
  4. replace service Affairs URI URI desired (by outcome) using the "Routing Options.

  To propagate the request in two different places, you must use 'foreach' action. Run the 'loop' for exactly twice, write logic to above point n ° 4-inner action loop.

• Having a strange action case structure on a timed loop.

  A resolved question yesterday, lead to a new problem. In this VI, I have a timer that triggers an external meter. The counter "counts" from 1 to 24, each with an action at a given time. However, once I got the timer and counter work, I found that the Boolean trigger remained on the hour enitre, and my action was repeated several times instead of only one. So, I changed the counter count 0.1 each interval, rather than 1.0, thinking that it would only allow my State business to operate for a shorter window. However, when I run the VI, the case of the State are active in the meantime, not at the interval. For example, cases of stae 2 is active between 1.5-2.5 iteration and iteration throguh 2.5 3.5 State case 3 is active. Can anyone suggest how to get either 1) better display resolution on the evidence of the State of th or 2) another way to get the Boolean value for just a few seconds?

  Thank you, Lynn.  Yep, I tried that (at least the half of it.)  I opened it in my first version, which is being 8.5.1.  I don't think to check in the dialog changes not saved, however.  I feel kind of sheepish having never tried that before.

  Well, here is my interpretation of what was asked for... I had to make a few assumptions, namely that the 'timed loop' refers to the while loop that runs at a defined interval, and that "triggers" are just the Boolean flags.

  I hope that this at least partially answered questions?

  Jim

• JavaScript for loop to execute Advanced Actions - execute Javascript does not?

  I use a loop to check the value of a Cookie.  When I add this using Execute Javascript it works fine but I want to run with certain other actions, if I want to use Of execute advanced Actions. When I add this coded to an action to run Javascript in the breast to perform advanced Actions code disappeared if I open the Script window again once.  I try to remove the code for loop in bold below and then the remaining code remains.  So I think that the problem must be with the loop for, but I don't see anything wrong with this code and I have, as I said that this code works fine if I use Javascript to run on its own. I've attached a video clip below to show what I mean.

  var task1_value = readCookie ("task1");

  function readCookie (name) {}

  var nameEQ = name + '=';

  var CA = document.cookie.split(';');

  for (var i = 0; i < ca.length; i ++) {}

  var c = ca [i];

  even if (c.charAt (0) ==' ') c = c.substring(1,c.length);

  If (c.indexOf (nameEQ) == 0) return c.substring (nameEQ.length, c.length);

  }

  Returns a null value.

  }

  I found that window JavaScript of CP does not like loops.

  Your best bet is to put the function in an external JS file from the top of the page. I always run scripts in an external file. Really helps debug that you do not have to republish Captivate. Just change your code and refresh the browser. If you use external file you can store all your functions there.

  I would also look into using the local storage instead of cookies. Very easy to implement and you can store a ton of information.

  Local storage - dive into HTML5

• Animation loop infinte on a page with a "stop" action

  I am building an application where each 'page' has a point (marked as a label) where the visibility of the page turns on.

  Each page has a 'stop' so that the entire chronology isn't fair play, so simply go through all pages without the users say it.

  Now on the first page, I want an animation looping indefinitely. With the action stop in place, is it possible?

  Thank you

  As soon as I asked the question, I managed to understand. Instead of moving an action to 'stop', I simply add an action of "play of ' and the link at the beginning of the page, thus looping. I'll use buttons to navigate to other pages/parts of the timeline.

• What is the Action Script (using AS2) code when you loop once a scene and then re-read and intervention

  What is the Action Script (using AS2) code when you loop once a scene and then re-read and slaughter on a certain slice?

  Basically, you need keep a count and use it as your stop control.  In the first image, it takes something to assign the value, but you do not want to assign an initial value, so you could use...

  var County;

  if(Count == undefined) {}
  Count = 0;
  } else {}
  Count ++;
  }

  Then in the frame where you want to stop after that a loop is completed you can have...

  if(Count == 1) {}

  Stop();

  }

• Back to Chapter 1 but end action the timeline loop

  Hi all

  Trying to CS6 yet precise deadlines for a reader blu - ray loop.  I understand that the way to do this is to set the end Action of timeline to the first chapter.  I did it for all the times in question, but none of them will acutally loop.  At the end of the video, the timeline returns to the previous menu screen.

  Videos are encoded H264 720 p Blu - Ray.

  A reflection as to why he is behaving in this way?  I'll try to remove and re-import the assets, re-building/linking the chronology, but other than that I am ideas.

  Let me know if you need more information.  Thanks for your suggestions!

  Lindsay

  Good mystery solved!  I re - set theTimeline on "Not defined", but substitution has not re-set the override button on "not defined".  With the two substitutes 'No Set' desired deadlines are loop now correctly.

  Thank you for pointing me in the right direction, John

• Define the actions of the buttons inside a loop for

  Hi, me again ^^
  This round is:

  I got a set of buttons and a text field where they load the content.

  I try to take a zillion functions and keep the neat code so I guessed I'd try set the actions to the buttons in the loop too. First of all, I had a few problems to the I counter inside the function onRelease (in fact I don't think I've ever had how do). But I tried this and it worked:
  Stop();
  var comprarXML = new XML();
  comprarXML.ignoreWhite = true;
  comprarXML.load('flash/comprar.xml');
  comprarXML.onLoad = checkLoading;
  function checkLoading (success) {}
  rootNode = comprarXML.firstChild;
  ButtonReleaseAndContent ();
  }
  function ButtonReleaseAndContent () {}
  for (i = 0; I < 12; i ++) {/ / my buttons are not dynamically generated, which is why the County.}
  btTemp = eval ('content.test.bt' + i);
  btTemp.txt.htmlText = rootNode.childNodes [i + 1].firstChild.firstChild.nodeValue;
  btTemp.temp = rootNode.childNodes [i + 1] Sublst.ChildNodes(1).ChildNodes(0) [1].firstChild.nodeValue;
  btTemp.onRelease = function () {}
  this.temp = content.test.test.htmlText;  the problematic line
  }
  }
  }
  On line where I put the text, I had one if "uh Yes, I may be refer to in the mc button, because the generated code goes in! So, I tried the this.temp, guessing it would be equal to the level of the key. A few seconds later I noticed that my SEO for the text field was not coming in the button, but the root. So I have no idea why this works. Anyone know what I did?

  If btTemp is a movieclip to assign dynamic properties (such as temp).  You can then retrieve this property when the button is released.

• Action script question on a loop to a part of the line of the time

  Hi all!

  You have another question about an action script editing in Adobe Flash. Earlier this year, I asked for help to set up a script of action where the video itself would start when the user hovers over the scene and loops from the beginning to the end.

  Now, I need to adapt it so that instead of a loop all the way back to the beginning, it goes rather to the points later in the animation (for example, say 10 seconds in) rather than backwards to the beginning.

  The Script that was created for me it was:

  FLV.source = "Flash.F4V";
  flv.autoPlay = false;

  flv.autoRewind = true;
  flv_btn.addEventListener (MouseEvent.ROLL_OVER, rolloverF);
  flv_btn.addEventListener (MouseEvent.ROLL_OUT, rolloutF);
  
  function rolloverF(e:Event):void {}
  FLV. Play();
  }
  function rolloutF(e:Event):void {}
  FLV. Stop();
  }
  
  flv.addEventListener (Event.COMPLETE, completeF);
  
  function completeF(e:Event):void {}
  FLV. Play();
  }

  Now, I think that what needs to be changed is the autoRewind = true section, but being a complete novice, I don't know where to start. I've seen articles online on a goto command, but my attempts to change the code did not work properly. Any ideas?

  use:

  FLV.source = "Flash.F4V";
  flv.autoPlay = false;

  flv_btn.addEventListener (MouseEvent.ROLL_OVER, rolloverF);
  flv_btn.addEventListener (MouseEvent.ROLL_OUT, rolloutF);

  function rolloverF(e:Event):void {}
  FLV. Play();
  }
  function rolloutF(e:Event):void {}
  FLV. Stop();
  }

  flv.addEventListener (Event.COMPLETE, completeF);

  function completeF(e:Event):void {}
  FLV. Seek (20);  use the right time

  FLV. Play();

  }

• Infinite loop of dynamic Action

  Hello
  
  I have a page with the number of days, start date and end date.
  If I change the number of days, I want to put the end date, based on the start date + num days.
  I also want to go in the other direction, so if they enter an end date, it will calculate the number of days.
  I have dynamic measures for the latter and both work very well. The problem is that I get a stack overflow error a second about. I guess it's stuck constantly running dynamic stocks 2 one after the other, each triggering the each other.
  
  Does anyone else have this problem? And how do solve you it?
  
  Thank you
  Richard

  Hi Richard,

  I would stick with your PL/SQL code to perform the calculation and follow these steps:

  
  
  1. Create something hidden, that will be used to store the calculated value.
  
  
  2. Ensure that your 'set value' sets the value of the element hidden, with the result of your calculation of PL/SQL.
  
  
  3. In the same dynamic action, create another 'Action', that fires after the 'value of the value"which copies the value returned in the element of the corresponding page. Use the action type 'Execute JavaScript Code', with something like the following:

     apex.jQuery('#P1_END').val($v('P1_HIDDEN'))
     

  
  
  
  This should circumvent the problem of infinite loop and still allow you to use PL/SQL to do the math. I also added an enhancement request to allow optional triggering of the 'Change' event deletion when you use the action type "set the value, in order to more easily avoid this type of scenario. Is considered for a future version of the APEX.

  It will be useful.

  Anthony.

• Stop the Action in a loop

  I have a simple intro created in Flash CS3 ( http://vanillahousedesign.com). On my Mac, when published and traveled, he plays and stops. But on a PC/Explorer a loop is executed. I changed my publish settings html and makes sure that 'Loop' reading is not checked, before the publish. I chose the last image of the film and added action "stop()". I have even highlighted keyframe where the movie ends, selected window > properties > properties > select the sound from the context menu and select stop from the menu contextual of synchronization, and then republished. Any of these will keep the movie looping on a PC/IE darn. My intro is annoying enough just to see and hear once, not to mention countless times! Thanks to all those who will help you.

  Thank you all. It must be a problem on very old PC Win IE version. We will consider this issue closed. Happy new year.

• Advanced action appears in a loop - 6 Captivate

  I have a HTML5 project that connects to another URL page on about 5 slides.  Jim was eough kind to inform me that there is a known issue on the binding of Captivate URLs that are not typed by hand. All URLS are typed by hand, and all the advanced actions are put in place so that on the last click fo the button, the blade should move on to the next, and the URL should open in a new tab (in that order).  This goes perfectly on the first series, but the second set does not advance the slide, he just opened the new window. If you return to the captivate window and click on the next button it respawns the new window, never to go to the next slide.  I deleted the project on my Web server, slides have to be recreated, rebuilt the action advanced, with no effect.  Anyone else running in all what simiilar?

  It is a bit of a show-stopper for me because I don't want to have just code a button - my hope was to make it run as a native application iPad, but if I can not take the chrome because users will have to navigate it is impossible.

  Add this to your existing JS code below:

  forward();
  open_win();
  

• Flash Action film stops but another layer set to loop

  Hi, is it possible to put an order for a film stops, stop();
  but still have a layer in your looping flash animation?

  For example, I need the movie to play for bar 1-50, then a stop, but I have an animation in a loop that I always have to run.  How can I turn off for my film but activate the animation I created for always loop?

  Create the animation loop as a separate movieclip.