Action plan shows as unavailable

Similar Questions

• Can a family sharing in the iCloud backup (only apple ID which is at the head of the family action plan)?

  Can a family sharing in the iCloud backup (only apple ID which is at the head of the family action plan)?

  I just set up our family sharing and separated all out of our apple ID.  They are both on the sharing of my family, but my daughters phone shows only 5 GB of storage on the backup to iCloud.  How do she shares my 200 GB?

  Thank you

  Mark

• Action plan

  Hello world
  
  I received this metalink action plan :)
  
  
  ACTION PLAN
  ===========
  1. log on to the workflow designer and then check if the AP invoice workflow has been dependent on the data
  base or not.
  
  2. check if there is a corresponding event created in WF_DEFERRED queue after approval for the Bill.
  To watch the WF_DEFERRED_EVENTS, you can use the following navigation-
  Workflow > queue summary.
  
  3. If there is no event in the WF_DEFERRED queue, please check if there are all the events in queue WF_ERROR.
  If you find events in the queue of the error, run the script WFSTATUS.sql and WFSTAT.sql and check what is the cause
  the error and correct the same.
  
  4. If the invoice has taken this step, you can run the scripts WFSTATUS.sql and WFSTAT.sql to see what he has the
  status of the invoice in the workflow. If that doesn't show any errors, run the workflow agent li
  Stener.
  Check if the listener agent workflow resumes this event
  
  5. ensure that there is a certain value in the author field of the request on the invoice.
  Please ensure that the name of the employee entered here is defined in HRMS as validation is
  fact against the defined values
  in HRMS. You will need to use the menu of FOLDERS to display the author field of the REQUEST.
  
  
  Where can I get this WFSTATUS.sql and WFSTAT.sql
  Support gave no details about this :(
  
  
  Thank you very much

  They are in $FND_TOP/sql on the admin layer.

• How to edit an action plan in the Configurator 2?

  1. I managed to create Blueprints for my iPad.
  2. I prepared the
  3. I implemented a plan of action for an iPad
  4. I then modified the plan of action, but when I connect the iPad it will not automatically refresh the new changes in the action plan.

  So my question is, how do I update the iPad without having to re - prepare and send the plan of action everywhere yet?

  Thank you very much

  Read this Apple knowledge base article... Go to the section titled Action run > change device information

  http://help.Apple.com/Configurator/Mac/2.0/

• Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

  * Original title: Vista 32-bit SP1

  I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

  I will certainly help you with this issue.

  This problem may occur if one of the following conditions is true:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Here are a few articles that you can consult in order to solve the problem.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

  How to obtain the latest Windows Vista service pack 

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

  Solve the problems when you can't install Internet Explorer 9

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Windows 7 Pro Action Center shows current backup permanently

  Windows 7 Pro Action Center shows current backup permanently, even if it's not, I don't have a backup set and Backup and Restore cannot find a backup.

  Why can't Microsoft find a solution to this problem with the network or the corrupted/missing files? My system works fine even with this problem of current backup. So, I learned to forget. But it would be nice if Microsoft would solve this problem.

  Hi flintnodule,

  Microsoft can and will fix the issue for you, but because it involves dircet contact with the troubled pc the only way to do it is through remote assistance. that is to call you Microsoft and allowing the tech Advisor take control of your pc directly. THS can lead however still other problems that not all advisers have the same stanard in cognition, (I'm talking about previous experiances). That's why I stated measures for any user to repiar this problem themselves in over the answer, but for some reason not to many are eager to make they perfer to ignore the help and just complian. the way I used overkill stages of difficulty was the following. 1. removal of devices connected, 2. back up the system and all the files, 3. Defragment os. 4, everthing unistall, which is the third part. 5, prepare an external hard drive for windows by labelling and re-formatting upward (note do not quick format). 6, clean, install windows 7 but use the options to format your drive first. 7, do not install anything just to configure windows 7 to your configuration (test performance and reliability monitor if all ok). 8, perform an upgrade and after what game action center full tuning IE levels all the recommended and send information to all users. and set performance and reliability thanks to (allow) windows firewall. 9, Center of action for perform a full upward and the image of the value system and set it to your external hard drive. 10, test of reliability and performance monitor, once everything is ok and the Action Center indicates that it is active and there is no problem, you are ready to reinstall all of your software for your backup you make early.

  hope this helps

  your

  ASHLEY No.: 1 FAN OF MICROSOFT AND WINDOWS 7 do not forget if you tick the response as correct, vote for him as useful to help other users find a solution faster

• How to make a user to increase the default size of the disc during the action plan?

  I have the problem with the field of "Ability" to the default volume, which is gray, so users cannot change its value in the request. It is plan basis of creation of VM with only one disk configured (I don't need at all, but it took to fill to record the action plan) and 'Allow the user to view and change storage reservation strategies' is checked. Users can add new volumes, but they cannot change the size of it with ID = 0. There are screenshots of request and action plan in the attachment. vRA 7.0.

  Hello

  Its a bug that will be fixed in 7.1.

  If you are a user of the API, you can override the disk size by adding the custom property VirtualMachine.Disk0.size at the time of the request.

  Unfortunately through the user interface, currently there is no way to change the size of the disks added during the creation period.

• My credit card has expired. I can't update the payment method. Now! My plan show expired. What should I do?

  My credit card has expired. I can't update the payment method. Now! My plan show expired. What should I do?

  Hello

  I don't see any subscription / membership to the title of the email that you use with the forums.

  Please share the e-mail in a private message so that we can provide you with comprehensive information.

  At the same time, if the plan has expired suggest you kindly purchase a new subscription.

  Please see: pricing and membership creative cloud plans | Adobe Creative Cloud

  I hope this information is useful!

• Configuration drop-down list when you request an action plan

  Because we are not allowed to the VCAC SDK, I am forced to use the workflow integrated calling my master workflow VCO.  My problem is that I have just rated provision which limits me to expose my configurations for each model.  An example of what I need is sales will have 40 configs while Finance has 10 configs.  I don't want their options in drop-down list to bleed over to other.

  Any ideas?

  Thank you

  -Stephen

  Well well, without knowing your particular use case and what are the variables, then Yes, maybe. I have more than 70 IaaS models right now, but I have ~ 20 profiles of construction. Nothing gets actually configured in the action plan itself except for material-specific values and model of vSphere being used for the provision of... All the news of real form is in building profiles. It is much easier to control that.

  At one point, I thought together to the bottom of each environment in a single model and have the o/s to be a configurable drop-down list, but finally I decided against that because I'm driving both the metadata information to be recovered vCAC and operate only vCO as a runtime engine. I wanted that little data hardcoded / fixed stored in vCO as humanly possible, so I build battery funding round have as much of the required inputs be stored in vCAC or vCenter, keeping the absolute minimum in vCO.

  Useful?

• New action plan 2.3

  Hello

  I noticed on the new action plan missing some content. It seems not to have anything around gathering requirements, risk, assumptions, constraints, stakeholders, etc.. Surely, this is still part of the review, it is a reason this is deleted?

  But I do not see the link to download the points of the plan of action in terms of the DCA. Try this link for the correct of the blueprint DCD http://mylearn.vmware.com/register.cfm?course=134085

• "Line In" shows "Currently unavailable" - how to make it "Ready".

  I would like to record music from an external source by using the "Line In" Jack, but as "Currently unavailable"-, show how to change this status on loan?

  What are you PC specs? Brand, model name, etc. OS 64 or 32-bit?

  See you soon,.

  Jerry

• 3 clues on 3 different columns, but explain plan shows full table scan for select queries

  I have a table - used and have index - functional ind1 (upper (f_name)), index - (emp_id) ind2 ind3 (upper (l_name) functional on 3 columns diffferent - what, emp_id, l_name respectively.) Now when I check explain plans for sub queries, they all have two shows complete table for the employee of the table scan. FYI - employee table is non-parittioned.

  Can someone tell me why 3 indices are not used here?

  (1) select emp_id, upper (f_name), upper (l_name) of the employee

  (2) select upper (f_name), mp_id, upper (l_name) of the employee

  where upper (f_name) = upper (f_name)

  and emp_id = emp_id

  and upper (l_name) = upper (l_name)

  If I can push oracle (version 11) to use these indexes somewho - maybe using tips? Any help is appreciated.

  
  Observations:
  
  SQL> desc emp1;
   Name                                      Null?    Type
   ----------------------------------------- -------- -----------------
   EMPID                                      NOT NULL NUMBER
   F_NAME                                    NOT NULL VARCHAR2(3)
   L_NAME                                    NOT NULL VARCHAR2(3)
   SALARY                                    NUMBER
   JOB_ROLE                                 VARCHAR2(5)
   DEPTID                                     NUMBER
  
  create index idx2 on emp1(empid);
  create index idx1 on emp1(upper(f_name) );
  create index idx3 on emp1(f_name,empid, l_name);
  exec dbms_stats.gather_table_stats(user,'EMP1', cascade=>true);
  
  8 rows selected.
  
  SQL> explain plan for
    2  select /*+ index_join(e idx1 idx2 idx3)*/   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select    upper(f_name),empid,upper(l_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select /*+ index_ffs(e idx3)*/   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 2496145112
  
  -----------------------------------------------------------------------------
  | Id  | Operation            | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------
  |   0 | SELECT STATEMENT     |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FAST FULL SCAN| IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -----------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select /*+ index(e idx3)*/   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> explain plan for
    2  select    upper(f_name),empid,upper(l_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  -------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> drop index idx3;
  
  Index dropped.
  
  SQL> explain plan for
    2     select   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3330885630
  
  --------------------------------------------------------------------------
  | Id  | Operation         | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |      | 20000 |   175K|    18   (0)| 00:00:01 |
  |   1 |  TABLE ACCESS FULL| EMP1 | 20000 |   175K|    18   (0)| 00:00:01 |
  --------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL> create index idx3 on emp1(f_name,empid, l_name );
  
  Index created.
  
  SQL>  explain plan for
    2     select   upper(l_name),empid, upper(f_name) from emp1 e;
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 3449967945
  
  -------------------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      | 20000 |   175K|    14   (0)| 00:00:01 |
  |   1 |  INDEX FULL SCAN | IDX3 | 20000 |   175K|    14   (0)| 00:00:01 |
  

• vCAC 6.0 selected clone - model Action Plan has been updated, now, it does not appear in the vCAC

  Hi all

  I have been playing with vCAC 6.0 for quite awhile (now updated vCAC 6.0.1) and have created a plan that will clone with Windows Server R2 model 2012. Comments agent has not been installed because I wanted only to lift the machine up and running with customization specifications created in vCenter.

  The plan was working as expected after I created the service, part of the catalogue and clearances. After that, I converted the virtual computer model to update the model with new Windows patches, and then convert back to model. Now when I try to create a new master plan, selected the workflow of clone and search for the model, the model that I've updated does not exist in the list. Curious, too, I went to change the blueprint and attempted to review for the model, and it does not appear on the list more. In fact, I created a model of linux (CentOS) at some point after the installation of the vCAC, and I don't see the list as well.

  
  

  No idea on what is happening? Newspapers in the Infrastructure tab-> monitoring-> Log was not showing errors, and I tried to restart all the components of vCAC, including a restart of all services on the server of IaaS.

  Probably, you have to manually kick off the collection of inventory data on computing resources where the model.

• Why the script does not when I use the action "success: Show '?

  Hi all

  I have a group of objects, that are initially hidden from view. I also have a button on the slide, which is configured to display this group of objects by clicking on it.

  The timeline is put on pause after 3 seconds, allowing the user to press the button to display the hidden group - but when the button is clicked the timeline resumes, I don't want to happen.

  No idea how can I avoid this problem?

  Captivate 8.0.1

  By replacing the simple action by action standard oneliner. Take a look on:

  Why choose Standard Simple action? -Captivate Blog

  This blog also has a link to a YouTube video that shows the difference.

• Explain Plan shows not good results.

  Hi gurus,
  
  Please help me understand under question.
  
  Whenever I have do explain plan on any sql statements he says as explained but when retriving explain plan output it shows same results again and again.
  
  DB - 11 GR 2 Stand alone
  ASM - configured.
  OS - RHEL 6.2.
  
  
  SQL > select count (*) in the t2114;
  
  COUNT (*)
  ----------
  639292
  
  SQL > explain plan for select count (*) from t2114;
  
  He explained.
  
  SQL > @?/rdbms/admin/utlxpls.sql
  
  PLAN_TABLE_OUTPUT
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Hash value of plan: 1497650422
  
  ----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ----------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | 6634. 524K | 2993 (19) | 00:00:01 |
  | 1. SORT ORDER BY | 6634. 524K | 2993 (19) | 00:00:01 |
  | 2. TABLE ACCESS BY INDEX ROWID | T2210 | 6634. 524K | 2947 (17) | 00:00:01 |
  |* 3 | INDEX RANGE SCAN | T2210_T | 6842. 108 (22) | 00:00:01 |
  ----------------------------------------------------------------------------------------
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  3 - access("T2210".") C490008000 ' =: SYS_B_0 AND "T2210".» C490009100 ' =: SYS_B_2.
  (AND "T2210". ' C301363300 '= TO_NUMBER (:SYS_B_1)).
  
  16 selected lines.
  
  
  SQL > explain the plan for
  2. SELECT T2114. C1 FROM T2114 WHERE ((T2114. C1000000001 =: 'SYS_B_0') AND (T2114. C536871442 =: 'SYS_B_1') AND (T2114. C536871477 =: 'SYS_B_2') AND ((: "SYS_B_3" - T2114.)) (C3) > =: 'SYS_B_4') AND ((: "SYS_B_5" - T2114.)) (C3) < =: 'SYS_B_6') AND (T2114. C1000000217 AS: 'SYS_B_7') AND (T2114. C536871478 <: 'SYS_B_8')) ORDER BY C1000000161 DESC,: 'SYS_B_9' ASC;
  
  He explained.
  
  SQL > SELECT * FROM TABLE (dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Hash value of plan: 1497650422
  
  ----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ----------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | 6634. 524K | 2993 (19) | 00:00:01 |
  | 1. SORT ORDER BY | 6634. 524K | 2993 (19) | 00:00:01 |
  | 2. TABLE ACCESS BY INDEX ROWID | T2210 | 6634. 524K | 2947 (17) | 00:00:01 |
  |* 3 | INDEX RANGE SCAN | T2210_T | 6842. 108 (22) | 00:00:01 |
  ----------------------------------------------------------------------------------------
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  3 - access("T2210".") C490008000 ' =: SYS_B_0 AND "T2210".» C490009100 ' =: SYS_B_2.
  (AND "T2210". ' C301363300 '= TO_NUMBER (:SYS_B_1)).
  
  16 selected lines.

  In the future, please do not use * on object.
  Use the owner, object_type, object_name
  You avoid output unreadable in doing so.

  In the output that you show, you would need to know where the PUBLIC synonym points, by querying dba_synonyms or all_synonyms.
  If she SYS. Plan_table, you can drop ARADMIN. PLAN_TABLE.
  If there is no PLAN_TABLE SYS, you have to solve this problem.

  -----------
  Sybrand Bakker
  Senior Oracle DBA