Action() URGENT methods * and ActionEvent() do not work in CommandLink

Similar Questions

• I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

  I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

  Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

  have you tried using a different suite of cd/dvd burning?

  Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

  There may be something to play with your access keys if you have a (ie., wirekeys)

• Urgent: I am trying to open a file of Government and it does not work

  Hello! I am trying to open a folder of cic immigration application and it does not work, message says to upgrade the software adobe reader, but when I try to install it says that I have already. Can you help me as soon as possible? Thank you.

  Hi nadiat43073873,

  Right-click on the PDF link and choose "save link as", save the PDF on your desktop & open it using the Reader app now.

  Kind regards
  Nicos

• Satellite A100-785 - after the virus the bus USB and wireless do not work

  Hello
  I have a Satellite A100-785 with Vista 32 bit.

  I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
  I downloaded and installed a new driver for my model, but it does not work.

  Help, please!

  And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
  See:
  [http://i39.tinypic.com/rw4f8p.jpg]

  Hello

  You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

  If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

  Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
  In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you can t create the recovery disk, you must order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• my video and streaming does not work correctly, always stop.

  my video and streaming does not work properly, his game and stops all the time.

  Hello

  1. this happens when you play movies or videos saved on the computer?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  If this happens when you stream or watching videos online, then I suggest you day flash player latest version and check if it helps:

  http://get.Adobe.com/flashplayer/

  Method 2:

  If the problem occurs even when you try to play the recorded video on the computer, then try to update the latest drivers for the video card and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see this link:

  http://support.Microsoft.com/kb/2532294

  It will be useful.

• Keyboard and mouse do not work on startup.help

  Keyboard and mouse are unresponsive at startup... help

  Hello

  Please write in the Microsoft Community Forums.

  I understand that the mouse and keyboard do not work to start the computer.

  Let me go ahead and help you with the issue.

  It would be more useful, if answering these questions:

  1 have you ever try to use different mouse and keyboard on the computer?

  2. What is the brand and model of the mouse and keyboard?

  3 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem:

  Method 1: Start in Safe Mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If the problem does not persist in safe mode I suggest you perform the clean boot:

  Method 2: run the clean boot:

  Perform a clean boot to determine if any 3rd party service is causing the issue:

  http://support.Microsoft.com/kb/929135

  Note: After you perform troubleshooting steps to clean boot, follow the steps in the link to start the computer to Normal startup mode.

  Method 2:

  Run the fix it and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Help and support does not work.

  Original title:

  win xp my help and support does not work

  Windows Help and support will not work

  Hello

  1. what exactly happens when you try to open help and support? You receive an error message?
  2. what service pack is installed in the computer?
  3 did you changes to the computer before the show?
  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc.

  (b) double click on Help and Support

  (c) to set the startup type on automatic.

  (d) to Start the Service.

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Let us know if it helps!

• My keyboard and mouse do not work. Can't click or type anything.

  Original title: keyboard and mouse

  Hello, my keyboard and mouse don't work I can get on at the office but can't click on what whatsoever as the two keyboard and mouse do not work I tried the BIOS but still couldn't have tried different keyboards and mice, and they do not work or do not know what to do please help

  Hello Shirley,

  ·         Have you checked if the same keyboard and mouse work on other computers?

  ·         Are these PS/2 or USB devices?

  ·         You did changes to the computer before the show?

  Method 1: Try to connect the keyboard and mouse even to another computer to see if they work.

  Method 2: If they are PS/2 devices, then try to connect to USB devices to check for the issue or vice versa.

  Report of the results.

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  This is a user to user forum. You don't talk to Apple.

  You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  VLC will play them?

  http://www.videolan.org/

• I'm on windows 7 and I upgraded to 10.0.2 and now it does not open. I completely deleted firefox and transferred again, and it does not work. So my last attempt, I removed firefox 10 again and downloaded the beta version and once more nothing.

  I'm on windows 7 and I've upgraded to the latest version of firefox, and now it will not open. I completely deleted firefox and transferred again, and it does not work. Then, I was that he could get through my firewall, and that has not worked. So my last attempt, I removed firefox 10 again and downloaded the beta version hoping that would make it and once again, nothing. It opens at all. Please help - y at - it a live chat or a number to speak to someone at Firefox?

  -Microsoft got a big update last night for the Windows 7 and I came this morning I was wondering if the update would help my FireFox. I thought it might because a lot of things in this forum said it was a security problem and they have been updated with security updates. SHAZAM! Firefox is now the new my browser to goto. Very happy to resume. Once more I did anything this morning, but click the icon after the big windows 7 update and we're back in business. Thanks for all your help!

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.