Activate the AHCI on HP Pavilion Dv6-2119tx (WF606PA)

Similar Questions

• Add 2nd hard drive for HP Pavilion Dv6-2119tx (WF606PA

  Hi I was wondering is it possible to convert the optical drive for a 2nd hard drive? As I used to get a SSD as my main hard drive and never use the Blu ray burner. See you soon

  Hello

  Please, try the next option:

  http://www.newmodeus.com/shop/?Main_Page=product_info&products_id=289

  Kind regards.

• Can I replace the processor of HP Pavilion dv6-6119wm?

  Can I replace the processor of HP Pavilion dv6-6119wm?

  I don't know if it is integrated.

  Thank you

  No if you do not replace it you need to get an AMD... the AMDs all have the same type of socket and the Intels are completely different.

• What is the max memory HP Pavilion dv6 [LM720AV] can be supported?

  What is the max memory HP Pavilion dv6 [LM720AV] can be supported?

  CPU i7-2720QM

  I know that it supports 8G (2 x 4G). I want to know if it supports 2 x 8G.

  Of after Crucial, it supports 8 GB maximum.
  
  http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dv6t%20Quad%20Edition%20Series & cat = RAM

• Satellite P100: How to activate the AHCI mode?

  As all you know, some laptops P100 series are equipped with a controller Intel 82801GBM SATA natively supports the AHCI and with a Fujitsu HDD which takes in charge the NCQ.

  However, the disc is forced in compatibility mode, and therefore the NCQ is disabled, resulting in a loss of performance (which is certainly necessary that laptop hard drives are generally slower than those of office).

  Unfortunately, there is no option in the BIOS which activates the AHCI mode and no tool like HWUtility that can twist that (although it wouldn't work). As far as I know, newer laptops support AHCI mode and there is also an option in the BIOS to enable it.

  Is it possible to activate the AHCI mode in our laptops beloved and make the most of our hard drives?

  Hello

  Do you think that the AHCI is disabled?
  You can run the Intel Chipset ID utility to determine if the ICH7DH SATA controller is already running in AHCI or not.

  However, I studied a little more on other forums that are a little more specific and find this:
  Activate the AHCI on Intel chipsets, without having to reinstall Windows 2000/XP
  http://www.Neowin.NET/forum/index.php?showtopic=457699
  and
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62909

  But you know, everything you make are at your own risk!

• Can I activate the AHCI on my CQ50-215nr mode?

  I want to improve my Compaq CQ50-215NR with an ssd when I install windows 7, bios is not all options for the sata settings and I would like to know if there is another way to activate the AHCI before I have buy an ssd.

  Hello

  Even if the option is not available in the Bios menu, AHCI is already enabled in Bios of HP.

  Kind regards

  DP - K

• HP Envy 1540T H8: How can I activate the AHCI?

  I installed a new Pro 850 Samsung 1 TB SSD drive which replaced a Samsung 256 GB SSD.  However, I am unable to get the computer to start with I select AHCI mode in the BIOS of the reader.   I can only boot into RAID mode and magician then tells me to activate the AHCI for optimal performance.

  The following system information is provided:

  OS: Windows 8.1 64bits

  Chipset: Intel (R) C600/X 79 series chipset controller LPC - 1 41

  Storage controllers: Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller 12.8.2.1000

  RAM: 32 GB

  Does anyone have any suggestions on how to proceed?  Thanks in advance for your help.

  Mr President.

  Thank you very much!.  I tried to solve this problem for days.  I had already installed a new copy of Windows 8.1, so I've been worreid I need to start over, but I do not have.  All I had to do was follow you to start in safe mode.   I then rebooted in UEFI, changed the RAID on AHCI and disabled Secure Boot.  The system then finished the re-boot and is in AHCI mode.  I have not lost all data on my three internal drives (1 SSD and 2 hard drives).  For some reason, he did reformat a NAS attached, but I don't have something out there that was not saved.

  I really apprecitae your help!

  All the best,

  John

• G9 - 791 tried to activate the AHCI in the BIOS, killed for laptop

  Since I've upgraded to a SSD, I tried to activate the AHCI in the BIOS mode, just like I did with my Alienware laptop.  After changing the setting and restart, I was unable to boot the system (it's ok), but also unable to get into the BIOS to change it back to the RAID.

  Which led me to return the laptop to the place where I bought it and get a new, still under warranty.  Is there a reason any BIOS gets damaged when you change this setting?  I'd like to use the AHCI mode instead, but I can't afford another laptop brick.

  I got it! I actually downloaded and installed the most recent Intel (14.8.XXX), and then changed RST 4 setting in my registry to reflect the changes of the AHCI. Restarted without enabling AHCI in the BIOS, to make the site everything was still good. Perfect. Return restarted to the BIOS and activated ONLY AHCI. Does not all other parameters. Rebooted (twice), and everything works!

• How can I return the volume bar display after reimagee the laptop? HP Pavilion dv6 2120sl

  Hello

  I just got back my cell phone after being reimagee Windows.

  There are above the keyboard volume and tabs of wi - fi, wi - fi works very well, if I turn it off it changes the color red. However not in the same goes for the volume (it's always white) and also before the reimage whenever I put the volume there was little box on the screen showing how I changed the volume... Now, still works, but I want this little box back what seemed before. How can I do?

  I installed HP MediaSmart together - and restarted the laptop after her, but always without success.

  I have a 64-bit Windows 7 installation.

  Do you have any suggestions?

  Thank you.

  Hello mmirjam, welcome to the Forums of HP.

  It seems that your lack of 'volume bar' since having your laptop reimagee. I will try to help you with this.

  Start using this document from Microsoft: how the icons appear in the notification area of change.

  He should be able to guide to check settings, to see if this has been changed.

  If this does not work, then try to update the audio drivers: HP Pavilion dv6-2120sl Entertainment Notebook PC Drivers.

  I would like to know how it all happens.
  Thanks for posting on the HP Forums.

• G62 b31ee I need to activate the ahci on my laptop please help

  Essentially I would like someone to change (or teach me how to change) my BIOS so that I can activate the hidden options and so tell - activate the AHCI.

  Hello:

  There is no way to do what you want.

  AHCI is enabled by default, and there is absolutely no way to change this.

  If you want to install Windows XP, then you should read the guide at the link below, read the Intel section and then read the downloadable document to integrate all drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• How to enable the AHCI in HP pavilion dv6700t?

  Hello

  I was wondering if it was possible to enable the AHCI on my pavilion dv6700t.  Chipset intel is a much older model, P965 of 2008 but still works fine.

  In Manager devices, under IDE ATA/ATAPI controllers, he says that the ich8m-e/m sata AHCI is enabled.  It is reasonable to assume that AHCI is therefore already activated? I have no way to do it via the BIOS, which limited configuration options. It's the PhoenixBIOS l58.

  I am considering installing a SSD as my boot (and only) and I read that the AHCI is important for functions such as the NCQ, etc..

  Thanks for your wisdom!

  Jason

  Hi, Jason:

  Yes, that's correct.

  AHCI is enabled by default.

  This is why everyone struggled to install XP on laptops. AHCI drivers must be loaded before installing XP at the prompt F6 or slipstreamed into a copy of the XP Setup disk.

  Now... you can do whatever you want, but I don't know of anyone on this forum who has installed an SSD in any model dv6000/dv9000 Series notebook.

  If you know it's possible, thanks for posting back after installing a SSD and let us know how you did.

  Paul

• How can I activate the AHCI on a Studio 540?

  Hello I recently upgraded my pc to an OCZ Vertex 3 240 GB ssd hard drive and moved my old HDD as a secondary for the storage of music, pictures and video files. I read that using the SSD in AHCI mode will further improve the performance of the disk. My question is how can I activate the AHCI in bios dell. the only im options given are SATA and RAID. Is it possible to run AHCI? Any help is appreciated. I have better than average knowledge with pc, s but far from an expert. Thank you

  Care Syatem

  Core 2 quad 8200 processor 2.3 ghz

  8 GB DDR2

  PNY geforce 560ti

  Agility 3 OCZ 240 GB primary

  WD caviar black 640 GB secondary

  Corsair 600w ch

  Windows 7 64 bit

  If your bios allows, you can find passage to the raid (even if you have only a single boot drive) can put you in ahci mode. Before making the change in the bios, you will have to do some registry tweaks like just change the bios setting you will get a bsod when you start.

  To enable switching between RAID/AHCI/IDE mode, you will need to change the values 'Start' in these key 0

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide\Start

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV\Start

  Once you make these changes, restart and set AHCI/raid in BIOS, save the changes and then restart.

• How to adjust the contrast screen (HP Pavilion dv6-3225dx)?

  Hello, the contrast on my screen in some sort I messed up, and I can't find out how to adjust it. Any help is very appreciated.

  Hey Nate,

  I have a HP Pavilion dv6 too - I came across your post (and 'Help' of Viki), because my contrast was all out of whack, too (much too bright). Adjust the gamma is nothing - but then I unplugged the power cord from the laptop, waited a second and plugged back in and voila! It's all good now. Don't know why...

  There is also this thread about changing the color settings - I have not tried what they said, but can be useful...

  http://h30434.www3.HP.com/T5/notebook-display-and-video/Pavilion-DV6-3120us-contrast/TD-p/374163

• HP Pavilion dv6-6c14nr: how to install the software on HP Pavilion dv6-6c14nr

  I had to reload a HP Pavilion dv6-6c14nr with Windows 7 Professional.   Also, I need to install Microsoft office.  I have the installation discs to install the programs and licenses.

  Question using an installation CD the same process as with Dell computers.   Dells you choose F12 and select the CD drive and start the installation on the CD.

  I already know that there is the partition of re - install that can be used to recover a broken BONE, but if this OS is not the one you want, then you must install the version of the OS from the CD you want, format the drive as part of the installation and continue on the it.

  Once again my question is simply the key F12 serves the same function on HP laptops.

  Thanks in advance

  Wlamore

  Hello

  No, F12 will not work on HP laptops. For Windows, please reboot your machine, it will display the key options you must hit to allow you to select where. Please select the DVD/CD player.

  You can install MS Office like any normal installtion process.

  Concerning

• Pavilion dv6-3152sl: green and pink strips horizontal on the swith on screen - Pavilion dv6-3152sl

  When I turn on my Pavilion dv6-3152sl, immediately after you start at the bottom of the screen there is green and pink horizontal stripes, just when the Windows logo runs, who this time seems unclear. These scratches disappear as soon as the flashing blue light from Windows 7 Home Edition gives the chance to enter the password.

  What is the problem in my notebook? What can I do to make these abnormal bands don't not to be there for the laptop turn on?

  My laptop got switchable graphics AMD. They are ATI Mobility Radeon HD 4200 and AMD Mobility Radeon HD 5000 Series.

  Thank you for your support.

  Hey, @Italian_Chiara,.

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your HP Pavilion dv6-3152sl notebook PC startup, you see the Green and pink lines.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  If you connect your laptop to an external monitor, the lines appear on the screen to the external monitor also?

  Have you tried to Uninstall the graphics drivers? If this isn't the case, please uninstall and then restart the computer laptop twice.

  Have you tried to Reset the BIOS?

  Here is another option for you to try:

  • In Device Manager:
  • Click display adapters
  • Right-click on family Graphics
  • Select software update of the driver
  • Select search automatically for updated driver software.
  • The laptop must find and automatically install the updated driver. Once the installation is complete, restart your laptop twice.

  Have you tried using HP Support Assistant to automatically search for updates? Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system at the time of purchase or need to be updated.