Sierra Installer starts do not

Similar Questions

• HP 2000 2116 - YOU: Installation starts is not after the Extraction of the driver installation

  Hello

  I just installed Windows 7 Ultimate 32 Bit OS. After installation, I downloaded all the files required from the Internet HP website driver installation.

  All the drivers have been installed end, except for the Wifi card.

  When I start to install the wifi driver, after extraction of the file in the "Swsetup" folder in the C drive, installation does not start. I don't know what to do.

  Help, please.

  Hello:

  You install the correct drivers?

  The BOM indicates that your laptop comes with the 9485GN 1 x 1 WiFi 802.11b/g/n Atheros card and Bluetooth 4.0 3012 combination, then that would be the drivers you need for the wireless and bluetooth...

  http://PartSurfer.HP.com/search.aspx?SearchText=B8N01PA

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp56572.exe

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  File name: sp56573.exe

• Question: when starting my 1 CCC database ~ I get, this installation package could not be opened... why?

  at the start of my 1 CCC database ~ I get, this installation package could not be opened... why?

  Please see the bottom of page for your support needs.
  http://CCC.CCCIS.com/pages/support/4.php

• I started receiving messages that Windows Installer service is not properly installed when I try to install a program.

  installation of Windows in windows xp service

  I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
  Running XP Home edition.
  I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
  I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.

  I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• Install the printer driver HP LaserJet 3100 for Wind.XP worms. 1.1 the installation program does not start.

  An older version of Jet Suite Pro for HP Laser Jet 3100 for Win 2000 /NT 4.0 had run under XP (with an error during systemstart).

  After an update of Windows XP or this SW Jet Suite Pro to clean record no longer works.

  A new t CD - ROM HP with HP LaserJet 3100 Printer Driver Version 1.1 for Windows XP SW starts and stops after some time.

  The installation program does not run.

  At the stop "WOW. EXE does not react "."  "Waiting times for 16-bit system subtask ends." Part.System if necessary. instability.    End with OK Win16 system.

  HP after reclamation / question without help until today.

  Dieter Jansen

  Hello

  I suggest to Uninstall all the HP Laserjet Printer drivers and then try to install.

  For the second question, you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• iMac 2012 - sierra installation failed, caught in the loop, please help

  Hey everybody.

  That's what I have:

  iMac 27 "mid-2011. He had on El Capitan.

  This iMac contains two hard drives and drive superdrive.

  A disc is 256 GB SSD and the other a regular 2 TB internal HARD drive.

  As SSD is faster that I keep my OS X and programs on this SSD drive, all the other stuff like photos, music, documents, are put on the classic 2 TB HDD.

  This is what happened:

  Attempt of I:

  Everything was going well until the installer has discovered that the SSD did not have a sufficient space to install. I quit the installer, the option pop up, I called "Startup Volume" has chosen my SSD and restarted it. Has been 2 attempts, if I'm not wrong, but worked. I killed and moved the files, I think now would be enough disk space on my SSD tried the Sierra ad install again.

  --> Attempt II:

  This time Sierra Installer arrived at the stage language choose where he welcomed and asked to choose the language. The next screen it tells me once again: not enough space, the bigger internal drive offers enough, but I don't want that. So, I tried the same exit to leave the program and launch then boot Volume installation...

  ... that in trouble:

  My SSD drive now no longer appears in this window of the boot Volume.

  When you try to access the boot Volume it will skip in the app language choose, sometimes shows this window choice animation multilingual, sometimes simply stays gray but will show when moving the mouse upwards arrow to the top of the screen, choose language drops in when I try to open the boot Volume after leaving the installation program. In addition, the language choice (can not be exited by cmd Q is said by the way) seems to open before the boot app Volume and the boot volume app does not appear my drive more-> Catastropheeeeee!

  Also option to restart regular off the menu above will not help. After about half to the top of the boot of the SIERRA Installer keeps new hindsight. No chance to reboot to my previous El Capitan based OSX. I am bound to this loop.

  Is turned off, wait and switch back to does not help, even in a loop.

  Then I tried also open disk utility, I also have an external time machine backup drive connected. Tried this way to restore my SSD of time machine, which fails on every attempt.

  I'm totally caught up.

  Help, please!

  just in case.

  I did the job.

  Launched my iMac in disc mode on my mac pro book. A few items to the disc hard iMac deleted, then restarted, macos sierra resumed and concluded correctly, in other words: all and working again!

  Even a message to Apple to look bad when insufficient disk space is detected, see my first post, thanks.

  Best regards

  Max

• Installation DVD does not recognize my internal HD on a 2008 iMac

  I'm looking for suggestions here.  My 94 year old mother has used the iMac 2008 8.1 for internet e-mail.  We needed to upgrade its OS X 10.5 to be able to upgrade to a new version of safari to access some banking sites.  I upgraded the memory.  Sister has an iMac with OS X 10.6.2 Installation/restore dvd 2010.  I went to update.  I have caused the initial problem because after reading info seemed I could create a second partition on the hard drive of 250 GB and use Time Machine to back up before preceding.  See not all the warnings on the addition of the partition. (Yes, if I had not forgotten my external hard drive I should not try that, but I forgot it.)  Things seemed to make the partition, but time machine bogged down and hung up.  After trying many things, I found myself deleting and resetting on the internal extended (journaled) using HD, recreating a single partition using the guidelines GUID, thinking that I could just do a clean reinstall.  BUT, while I can check/fix delete etc the internal disk utility when HD started from my external hard drive so I boot from the OS install DVD it does not recognize the internal HD.   ? ? ?   Gives cannot update this post Mac.  If I run the Setup from the beginning of the disk upward once again, no offers to go to in the installation program.  I can access everything in THE RUNOFF when the post boot drive.

  Why THE works on the internal HD of the post start up (which was made with the 10.6.2 installation DVD), but not when started to leave the DVD left me puzzled. The DVD is not just see the it.  When it is started from the DVD with the external drive, he sees very well.   You are looking for ideas, thank you in advance.  By the Way the machine had no problem before starting this :) live and learn!

  If I understand what you were doing, you tried to use a Mac installation disc and to update another Mac? Is this correct?

  If I am not mistaken, which simply does not work. The installation provided with Mac discs won't work on another Mac, the original installation discs are machine-specific.

• Flash Player installer install well not until the closure of the Firfox browser. It IS closed, why used to work the installer?

  I use the exe installer. Adobe for Flash Player, the most recent version. When the install window comes up, it
  Flash Player will begin the installation when the Mozilla/Firefox browser is , closed. He IS closed, nothing is open
  but the installation program does not start... Installer will continue when conflicting applications are closed... Mozilla Firefox.Im
  no computer genius, but I know when the browser is closed, or I thought I did... Help!

  Hello, please try to restart your computer and run the installer flash afterwards before you open firefox or other browsers.

  Also note that you are running an outdated version seriously of firefox which is affected by many known security vulnerabilities. to keep your system and all data on it without danger, Update Firefox to the latest version as soon as possible!

• Error "Installation package could not be opened" when tried to install Age of Empires 3

  Original title: installation package could not be opened

  Due to problems with Age of Empires 1, 2 and 3, I recently uninstalled using Advanced Uninstaller. I then reinstalled AOE 1 and 2 but when I tried to install AOE 3 I got the message "the installation package could not be opened. Verify that the package exists and that you can access it. \Age of Empires III.msi"

  I assumed that the installation disc (which must be loaded when reading) was struck and he was polite. The warning message still appears. I'm afraid I might have deleted something that I should not have when you uninstall the game. Any suggestions?

  
  Hi kafka001,
   
  Try these steps and check the result.
  Step 1: Copy the game on the hard drive and install the game as administrator
  a. copy the contents of the CD game on a new foler hard disk.
  b. right-click on the game configuration file and click "Run as Administrator"
  c. follow the instructions in the wizard to install the game successfully.
   
  Step 2: Delete the contents of the temporary folder in Windows
  a. Click Start, type % temp % in the start search box and press ENTER.
  b. in the Organize menu, click Select all.
  c. in the Organize menu, click on delete.
  d. click Yes.
   
  Step 3: If the problem persists, try to install the game in a different folder or to a different drive
  a. start game installation.
  Note: Do not click on quick installation during installation.
  b. follow the setting menus until you see the button change.
  c. click on change.
  d. in the path box, delete the existing path, and then type the following text:
  : \Program Files\Microsoft Games\game name
  In this example, is the drive letter of the hard disk and the name of the game is the name of the game you are trying to install.
  e. click OK when finished.
  f. follow the instructions that appear on the screen to install the game.
   
  For more troubleshooting, see this article
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot activate XP Repair, installation ID does not work on the phone

  Hi all, I recently had to run a repair of Windows XP Edition family due to a driver issue and finally managed to return to the start screen and try to log in, but it wont let me connect you without activation (I suppose some confusion because it is installed on my computer for more than 30 days, but the repair made me have to reactivate).  So, I tried to start safe mode and was able to connect here in the version without networking.  Unfortunately, when I try to activate by phone (no network connection, the default ethernet driver was the cause of all this to start), the automated thing will not take the installation ID that is displayed in the activation page.  I know that I have a valid product key and the original disk, as I used it a year ago to re - install on a new hard drive, but I have no way to actually enter the product key!

  Assumptions on how I can try to work around this problem for long enough to activate online (I use a USB wireless, but the computer must be started in order to establish the connection), or why the crazy long installation ID does not work?

  Thank you very much

  Eric

  Hi EWool,

  • Have you tried to activate the normal mode?

  You cannot activate Windows XP safe mode and most of the drivers does not work in safe mode.

  I suggest that you contact the support of Microsoft telephone activation to reactivate Windows XP.

  How to find a phone number for a Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929

• No failure, but also installation start-up in lockout mode

  Please someone help! So I got a Dell computer to a friend whose father had passed, apparently, his father had a password for administrator account protected, but even if you try and you enter in safe mode, the exact same Congress... up login and password for windows... not the disc as it was given to me because I had not a computer... I really hate, can.someone please help... also its windows XP pro...

  Thank you Kara

  Most recently produced Dell computers include a built-in method to restore the computer to its "fresh coming from the factory" State.

  Doing so, of course, erase everything now on the computer, including any documents that you may have created since you guessed it and also any software that has been added by the previous owner (that is, not your computer when it came from Dell).  After erasing, Windows will be re-installed, as well as all the stuff 'free' than Dell initially loaded on the computer (you'll want to get rid of most of it).

  You will need to update the computer after you have reinstalled Windows... but there are a lot of people here who can guide you in this process.

  Assuming that some versions of Windows XP has been installed by the factory, you should be aware that, as of April 8, 2014, Microsoft will support is Windows XP.  This does not mean that computers with Windows XP stops working, but this does not mean they will become increasingly vulnerable to malware.

  According to you how technically adventurous, you can ask for help in installing Linux - which is a free operating system.  These days, you can install the versions of Linux that are quite "Windows-like" - and most of the facilities include a free "productivity suite", which is compatible with Microsoft Office file formats.

  Please answer the following three questions:

  What is the number of number of Service Dell computer 'new to you?  See this for help--> http://support.dell.com/support/topics/global.aspx/support/en/identifyyoursystem?c=us&cs=555&l=en&s=hea&DoNotRedirect=y

  Exactly what do you mean by "locked out of installation start?  The body of your question only mentions the Safe Mode.  What do you do to get into the 'boot setup' and what happens?

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• This installation package could not be opened. [SOLVED]

  I try to install Java 6 update 18 and get the error message:

  "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. »

  I uninstalled Mcafee, spybot, and ad-aware.  I also disabled all the security of vista and UAC.  The only account on my computer's administrator.

  I followed some suggestions on this site and made a run and type msiexec / unregister, and then run and typing msiexec/regserver and I still get the same error.

  I also tried to run the program as administrator and with UAC turned back does not.  I tried to download Windows install 4.5 for x 86 but it tells me that this update is not compatible with my vista installation.  I am running vista Home premium 32-bit, so I don't know why I get this error.

  I also have service pack 2 installed.

  I'm completely lost on why this is happening.  This situation of not being able to install Java also applies to a few other programs as well, but not all of them.  I don't remember witch ones they are, but Java is my main concern at the moment and I feel that if this is fixed, other programs will install as well.

  I would apprectiate very any help on this.

  UPDATE: I also tried Run and type in services.msc and found windows install and changed manual automatic and started the service.
  It didn't work either. :-(

  -UPDATE - UPDATE - UPDATED - UPDATE - UPDATE - UPDATE - UPDATED - UPDATE -.

  This problem is now solved!

  It seems that the "Run as Administrator" command gives you administrative privileges only, and they are not sufficient to install Java (and OpenOffice, by association) and other programs as well. To work around this problem, you must actually you as an administrator. Open a command prompt with admin rights by clicking Start, run, type cmd in the search/run box and pressing CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  NET user administrator / active: No.

  Wallah, its done and everything works.

  Microsoft would only say that a 'solution '.

  It is a peer-to-peer forum, operated by Microsoft. The proposed solution came from a member of the public and not Microsoft. The word [SOLVED] in the title of the thread was registered by the original poster, not Microsoft.

  Since this thread is very old, I suggest that if you have a similar problem create you a new thread for it by going here:

  http://answers.microsoft.com/en-us .

  I hope this clarifies the situation and assistance.   :)

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833