Activate the LDAP SYNCHRONIZATION in IOM 12.1.2.2

Similar Questions

• Doubt about the LDAP synchronization

  Hi all
  
  I have sync LDAP enabled on my server of IOM. I also installed OID connector. I installed it since I want a user to be able to see DIO user resource in service to him in the "resources" tab. Now, whenever I create a new user, the user is created successfully. Now I have an access policy that grants the user the user OID resource based on its role. Now, once the user is created, I see in the OID I use. Of course, it is placed in service in the cn = default user directory but I read here that it is configurable from the LDAP container rules xml file. Now this provisioning in OID arrives with LDAP synchronization, and so I do not see any resource under the tab "resources". Then I grants it the user the OID resource by attaching the role to him and now he gets put in service to the OID as well. Now I see that based on the pre fill out cards that I put in place, this user gets provisioned to the correct container in the OID. But the question is now I find myself with two users with the same name and details in the directory of the OID. I don't want that to happen. Is there some way I can cut the somehow OID LDAP synchronization over the create user operation? Commissioning product only when I apply the role and therefore in the correct container?
  
  Thank you
  $id

  This is where, with a solid knowledge of the IOM is required. Should be re-evaluated the connector. For example, if the user exists, you know that you can not use the default create the task from the user. You will need to put just a spot of AutoComplete, since you know that each user will exist. You must also remove all your form variables that are managed from the user profile of the IOM.

  I suggest the following:

  Change your form to include only the user ID, the common name and the OrclGUID and name of the organization. You can use a pre-fill adapter on all those who will come from the user profile, because they already exist. If you need to move them to a different OU, after execution of the AutoComplete that defines the status of provisioned, you could start an update task the organization name field, which then the user to the appropriate ORGANIZATIONAL unit.

  You really need to think about all the tasks, and what is involved and change the connector. When you implement two methods that accomplish the same thing, you need to remove a few pieces of one of them. If you need to look at all of the tasks that will be required and the actions which are carried out. Some of them will have to be autocomplété so you can always view the status of correct resource.

  -Kevin

• Popup annoying message to activate the mobile synchronization LR

  Hello

  Each time has to create a virtual copy of a part of the image of a collection a popup message tells me that mobile LR is synchronized from active. I activated by mistake synchronization on this collection, but even by removing the synch, it keeps the display this popup when I create or delete a virtual copy. I don't want mobile LR and all the stuff in synch, how do I avoid the popups of theses.

  Thank you!

  

  Problem solved by creating another catalog important all my images from the "corrupt."

  I am happy!

• Error: The user is not synchronized in the LDAP directory.

  Hello

  I have observed that the users imported via the load utility to bulk IOM does not get incorporated into the OID (as the configuration via LDAPSync). Additionally, when you try to change a users in the identity Console give me the following error message:

  IAM-2050243: process Orchestration with id 5436, failed with the IAM-3010059 error message: change failed because the user TSEMMENS is not synchronized with the LDAP directory.

  I need a manual task for this? or is it a mistake?

  Thank you

  Hello

  Because users are not present OID, so during change it will throw the error.

  Try running the following Scheduler:

  LDAPSync Post allow provision users to LDAP
  

  E.7 Provisioning of users and roles created before enabling the LDAP LDAP synchronization

  If you create users and roles in Oracle Identity Manager deployment without LDAP synchronization and decide later activate the LDAP synchronization, then the users and roles created prior to activation of the LDAP synchronization must be synchronized with LDAP after activation. The commissioning of the users, roles, the role memberships and hierarchy, role of LDAP is obtained by these regular positions predefined LDAP:

  • LDAPSync Post allow provision users to LDAP
  • LDAPSync Post Enable provision roles to LDAP
  • LDAPSync Post Enable provision of roles for LDAP group memberships
  • LDAPSync Post Select available role hierarchy in LDAP

  Allowing a LDAP synchronization in Oracle Identity Manager - 11g Release 2 (11.1.2.2.0)

  We'll see if it creates the entry in OID.

  ~ J

• Enabling LDAP synchronization after configuration of the IOM in R2

  Friends,
  
  Did anyone tried enabling the LDAP synchronization after configuration of the IOM in R2?
  
  I'm doing the steps the below url.
  
  http://docs.Oracle.com/CD/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
  
  But I'm not finding below.
  
  / db/LDAPUser
  / db/LDAPRole
  / db/LDAPRoleHierarchy
  / db/LDAPRoleMembership
  / DB/RA_LDAPROLE. XML
  / DB/RA_LDAPROLEHIERARCHY. XML
  / DB/RA_LDAPROLEMEMBERSHIP. XML
  / DB/RA_LDAPUSER. XML
  / DB/RA_MLS_LDAPROLE. XML
  / DB/RA_MLS_LDAPUSER. XML
  
  Few of them exist in/metadata/iam-features-ldap-sync, but not all. I'm not find LDAPContrainerRules.xml anywhere at all.
  
  I do something wrong or this documentation is wrong.
  
  Please suggest.

  Another post, try the following
  I do not have the tiried yet, it seems ok. After your results/experiences, must also try.

  Find the detailed steps in the link below
  http://docs.Oracle.com/CD/E27559_01/install.1112/e27301/OIM.htm#CDDGJIBJ
  http://docs.Oracle.com/CD/E14571_01/install.1111/e12002/oidonly014.htm

• Disadvantages of the use of LDAP Sync in IOM

  Hi Experts,

  We plan to use LDAP Sync to create users in OID as soon as they have created on OIM. Can is it you equipment please let me know the disadvantages/limitations to allow the LDAP synchronization and a little comparison on the use of it against the commissioning to the OID of the IOM.

  Thank you

  Partha

  This link may be useful

  https://forums.Oracle.com/thread/2482749?TSTART=0

• Create user IOM - LDAP synchronization error

  Hello world
  
  When I try to create a user of IOM on create screen of the user, an error occurs.
  
  Error:
  IAM-2050243: process of Orchestration with the id 296394, failed with error 3010201-IAM: LDAP create event failed: failed to get LDAP connection and the root cause is - cannot create the connection
  
  I guess that this error associated with the LDAP synchronization. But I do not want to synchronize any LDAP server. I want to create this user in a single database of IOM.
  
  How can I solve this problem?
  How can I cancel the LDAP synchronization?
  
  Thank you.
  Best regards.

  Visit this link to disable the LDAP synchronization.

  http://docs.Oracle.com/CD/E27559_01/integration.1112/e27123/oid_oim.htm#CHDDJAJA

• Impossible to activate the browser helper Groove Gfs & Groove synchronization of files

  How can I activate the helper Groove Gfs browser & Groove folder synchronization

  Hello, I disabled the foregoing manage add ons by mistake... it won't let me now allow them... Please can u help

  Hello

  ·         What happens when you try to activate the Add-ons?

  ·         What browser do you use?

  If you use Internet Explorer, you can follow this link & check if it helps.

  How to manage add-ons in Internet Explorer in Windows XP Service Pack 2

  
  Reference: Internet Explorer Add-ons: frequently asked questions

  Note: This article is applicable to Internet Explorer 7 or 8.

  Hope the helps of information.

  Please post back and we do know.

   

• The new synchronization process and the master password do not mix

  Article why I can't sync my passwords? _{linkified ~ J99} says that the password inhibits synchronization, which explains why the "password sync" option is grayed out, if the password is used. Then to syncv passwords that must disable the master password, i.e. by train to "empty".

  What speaks against the following:

  1. disable the password and let synchronization collect existing passwords
  2. activate the password
  3. do this on all the devices of interest

  Finally, all devices should have 'more or less' synchronized passwords, while benefiting from the security provided by their main password. "Roughly", because the above procedure consecutively for devices A, B, C ends with B having a synchronized set passwords of A and B and C the game, containing people with disabilities of A synchronization, B and C (which is all of the passwords in the cloud). Given the fact we do not change passwords too often, so this shouldn't be a big problem. We can, for instance recovery procedure above for A at the end of the round.

  Does make sense?

  TiA

  SMO

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=995268#C58

  "The problem of this bug is on the fact that we are no longer synchronized passwords if you have master-password enabled. We realize this is a significant limitation and we are working on a solution to bring things back to parity with the synchronization of the former. We do not take this issue seriously, and certainly, the challenge will be to store the credentials FxA in connection manager, so protected by the master-password as are other passwords. »

• Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

  Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

  Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

  Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

  Hi Phil,

  Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  2. have you updated to Service Pack 2 installed?

  3. don't you make changes to the computer before this problem?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

  Method 2.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

  Additional information.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• VCS do not trust certificate - configuration of the LDAP user

  I have a cluster of 2 Telepresence VCS-control in the same network (vlan) and a bunch of 2 telepresence Expressway to same DMZ network (vlan). And both are on the same site. The two masters counterparts I managed to synchronize the servers against the ldap server (AD), but two of the slave with the same config for users/certificate/ldap settings fail. .  "DNS Uable to resolve the address of the LDAP server It seems to me that the peers do not trust the certificate.

  Newspapers that you attached are newspapers events and diagnostic logs not VCS. However according to these newspapers, it seems that VCS slave is not able to connect to the ldap server. If DNS resolution is probably ongoing, but the tcp/tls connection is not established.

  I recommend to make a journal of diagnosis (Maintenance > Diagnostics > diagnostic logging) everything by reproducing the connection failed to see what part of the connection fails.

  If you root for VCS slave access you may also connect as root via ssh and then run the following command:

  > tcpdump-port tcp s0

  Insert the port you use to connect to ldap in the field and then press ENTER. you will now see all the traffic to and from the port. Do you see some resets? Is traffic in one direction? This will help you understand why failure is implemented.

• SSL in the APEX for the LDAP call

  Hi all

  I have to call my Ldap server for the login process. The team of LDAP, asking me to activate the SSL mode in the APEX. They provided the SSL certificate.

  Now, my question is what exactly I need to do to activate the SSL authentication mode in the APEX? Do I need to install any certificate to the server database or Web server to allow this SSL?

  How its work? Any idea would be appreciated. Lack of experience in the networking functionality.

  My Version of Apex: APEX 4.0

  Database: Oracle 10G

  See you soon,.

  San.

  Yes you are right. Configure the SSL certificate in the oracle portfolio.

  Thank you

  Lacombe

• How to activate the video without coating

  I am doing a demo application using flash.

  I'm a Flash newbie.

  Importing the video is easy, but I didn't understand how to use it.

  If I embed the video and the game in the timeline panel, I can work on it and add the motion tweens of the hand to the video to make a demo of interesting application, BUT as Flash puts cautioned however, integrating video causes synchronization question-YES, HE DID! It exports badly and is unusable.

  I don't understand how to use the video. For me, the video is only as an image of sill and don't like a video at all.

  So how can I activate the video work with the timeline to add graphic interpolation without the integration of the video?

  How can I add the hand movements to the video in flash to simulate the push to talk key?

  1. If you set your flash to 29.97 frame rate, you can be able to overcome the problems of synchronization of your embedded video.  This is the simplest solution for inexperienced users of flash.

  2. you can also play your video in an flvplayback component.  You can add some cuepoints to your video and use to raise events in flash you can 'sync' flash animation / sound with animation / sound your video.

• How to activate the "Change Password" on the page "my account"?

  Hi all
  
  I log on using "Administrator" on the page "My account", there is no "Change Password" link on the page.
  Can someone tell me what I need to do to activate it?
  
  Thank you
  Dan.

  With 11g, OBIEE essentially uses the notion of 10g of external authentication.

  By default, this is done by the LDAP WLS (Weblogic) identity store, but it can be done by an another supported authenticator WLS, or OBIS (custom authenticator or LDAP) metadata. As a result, OBIEE has control over user passwords; This is why the steps mentioned in the notes 1102353.1 do not apply to OBIEE 11 g, but only to users internal/repository-defined in OBIEE 10 g.

  So, as for the maintenance of password in OBIEE 10 g when an external authenticator is used, it is in this authentication system external this password is changed, not in OBIEE 11 g. There is no option in OBIEE 11 g to allow users to change passwords.

  There are two alternatives with which you can change your password:
  (1) from the Weblogic/WLST administration console.
  You must give this user in the Weblogic console access or access to browse the hierarchy of involved MBean and other change permissions. Change the password using WLST instance statement here:

  Ideally, the console and WLST approaches are used by administrative accounts to manage other users. But the console and WLST possible to allow other users to change the passwords (which will be more or less as an administrative task by the users themselves)

  (2) with the help of a programmatic approach.
  Here, the application that intends to provide the users with the password change functionality must implement this functionality on its own (GUI more appeal to the relevant Weblogic API). WebLogic provides an MBean that the application can use to achieve this. See here for more information.

  An enhancement request is for this feature. It is unpublished bug 11836170 - allow non-admin users to change passwords in obiee 11 g.

• Question about deleting of the LDAP user and integration

  In the Document "Management Console Help", he States:
  
  "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »
  
  This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.
  
  What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.
  
  I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?
  
  Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."
  
  As always, thanks for the info!
  
  
  Thank you
  -ryan
  
  Ryan Sullivan | ECMconsultant
  http://www.ecmconsultant.NET/