Create user IOM - LDAP synchronization error

Similar Questions

• AD and Exchange provisioning is successful but fails to create user IOM

  Hello
  I try to configure exchange 2010 by using Exchange Connector that I customized. When I create user in IOM, AD provisoning begins, then AD user is created, then Exchange provisioning starts & Exchange gets put in service. At the moment where it all happens, IOM page displays error on the page and the user is created.
  Now when you search user with that ID, then no user found in IDM. When user is created in AD and Exchange.
  Please help me to solve the issue.
  
  
  
  Thank you

  These problems are solved by the elimination of the technique of possibilities. If you think that Remote Manager is the cause of questions, just don't call it. Fix rather just tcCompleteTask.

  If the user begins to have created then, fine. The reason why we Remote Manager.

  If not then remove all custom as pre or post handler, if any, pre fill adapters, if any, custom, if any process tasks. Hope you got the theme behind this technique.

  Try to create the user after the removal of each component.

  The moment you are able to create users, you have identified the problem.

  All the best.

• create user APEX_030200 identified by «»

  My first attempt to install APEX in a new database of Oracle11g on Windows XP. I noticed the following error:
  
  I. O R A C L E S Y S I N S T A L L P R O C E S S
  .. create user flows
  create user APEX_030200 identified by «»
  *
  ERROR on line 1:
  ORA-01741: identifier of length zero illegal
  
  Why the installation process had not an identifier? I tried to issue the same statement in sqlplus and got the same result.
  
  Thanks for your help.

  Hi Vernon,

  You have run
  @apexins tablespace_apex tablespace_files tablespace_temp images

  Where:
  * tablespace_apex is the name of the storage space for the user of the Oracle Application Express application.
  * tablespace_files is the name of the storage space for the user to Oracle Application Express files.
  * tablespace_temp is the name of the temporary storage space.
  * images is the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that / i /.
  Example: @apexins SYSAUX SYSAUX TEMP is

  And when he asks the script provided a password for the ADMIN user?

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• IOM Provisioning - OID Create User fails with a weird error

  Hello
  
  I have the auto layout installation service using access policies, the user is to created in IOM, then he's trying to delivery to the OID.
  
  I get the following error while trying to create the user in the OID. The "Create a user" task is rejected status with the error "Could not create user".
  
  
  DEBUG, December 6, 2010 14:07:33, 573, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: getMultiValues(): COMPLETED
  DEBUG, December 6, 2010 14:07:33, 574, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: escapeCharactersDN(): STARTED
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) generic Exception Exception:
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],
  ERROR, December 6, 2010 14:07:33, 575, [XL_INTG. OID],====================================================
  
  DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. Election of OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) with the code: USER_CREATION_FAILED
  DEBUG, December 6, 2010 14:07:33, 575, [XL_INTG. OID], com.thortech.XL.Integration.OID.tcUtilOIDUserOperations: disconnectLDAP(): STARTED
  
  
  
  I mentioned the following post:
  
  IOM - OID Direct Provisioning of users newly created via the err access policy
  
  Mistakes are similar, but it seems that in my case the container DN is updated using the adapters to prepopulate.
  
  Any ideas to fix it?
  
  Concerning
  Vijay Colin

  I would recommend to sniff the connection (http://iamreflections.blogspot.com/2010/08/how-i-learned-to-stop-worring-and-love.html) or decompile the connector.

  Newspapers are not very useful.

  Best regards
  / Martin

• An error occurred when executing create user operation. Error: NO_SUCH_OB

  Hi all
  
  
  
  As part of the Ldap synchronization, I am able to do the LDAP synchronization. After running LDAPpostconfig, I activated the LDAP synchronization
  
  But when I create a user in the Console of administration of IOM, Im faced with the error "an error has occurred while the show create user operation. "Error: null NO_SUCH_OBJECT.
  
  
  
  
  One please you suggest any solution for this
  
  
  
  
  Thank you
  Kiran

  Hello

  I have seen this error recently, mainly if we try with the different software versions that we get above message. As DIO works with 11.1.1.6.0 and IAM running with 11.1.1.5.0.

  To resolve the problem, you must reinstall all components with version 11.1.1.5.0 with weblogic 10.3.5.0 and follow the steps again for the LDAP synchronization. Hope it will solve your problem.

  Kind regards
  Ravindher

• Not able to create users in OID by IOM

  Hello
  
  I create users in IOM and their supply of OID. The user to create works well but the supply does not work.
  
  The task of the user to create is get rejected with the error message like:
  Answer: Not available target error
  Answer Description: Server not available target
  
  In the weblogic console his error showing that:
  INFO, February 24, 2010 18:42:13, 140, [XL_INTG. OID], parameter Variables passed in co
  m.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S): are
  sContainerDN = or = AGI (ENI UK Ltd.), o = shippers, dc is xoserve-apps, dc = com, sFirstName
  is testuser17, sLastName is testuser17, sUserDNParam = TESTUSER17,
  INFO, February 24, 2010 18:42:13, 156, [XL_INTG. OID], com.thortech.XL.Integration.OID.UTI
  l.tcUtilLDAPOperations: connectToAvailableOID(): SSL option is not selected in
  ITResource
  ERROR, 24 February 2010 18:42:16, 156, [XL_INTG. OID],===================================
  =================
  ERROR, 24 February 2010 18:42:16, 156, [XL_INTG. OID,] ERROR in OID:connectToAvailableOID
  (CommunicationExceptionUnable) to create the Initial of LDAP context
  ERROR, 24 February 2010 18:42:16, 156, [XL_INTG. OID],===================================
  =================
  
  ERROR, 24 February 2010 18:42:16, 156, [XL_INTG. OID],===================================
  =================
  ERROR, 24 February 2010 18:42:16, 156, [XL_INTG. OID], 10.224.29.51:389
  ERROR, 24 February 2010 18:42:16, 156, [XL_INTG. OID],===================================
  
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID], com.thortech.XL.Integration.OID.UTI
  l.tcUtilLDAPOperations: disconnectFromLDAP(): cannot close the LDAP context.
  The context has been created probably not, since it is null
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID],===================================
  =================
  
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID],===================================
  =================
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID,] ERROR in com.thortech.xl.integrati
  on. OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) NoInitialContextExceptionEr
  MMR during the connection to the target
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID],===================================
  =================
  
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID],===================================
  =================
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID], com.thortech.XL.Integration.OID.UTI
  l.tcUtilLDAPOperations: cannot close the LDAP context. The context was probably n
  OT created, because it is null
  ERROR, 24 February 2010 18:42:16, 171, [XL_INTG. OID],===================================
  =================
  
  Help, please.
  
  Thanks in advance.

  May be your connection settings are correct, also check if the OID is released or not.

  You are able to open the OID?

• user created the IOM must be synchronized in OUD to a separate ORGANIZATIONAL unit

  Hello

  I create user in IOM. When I create a user, it must also be created in a 'OU = Services"to the OUD.

  Sync LDAP is already enabled. Generally, when we create a user, it gets synchronized container Users OUD. We want to keep the users of this service separately for the best use of the organization.

  is there a way to do this?

  Please suggest

  Thank you

  Try this.

  Role = Service account

  OU = services, cn = users, dc = mms, dc = doi, dc = net

  Make sure user_type the user is "Service account" in the IOM user profile.

• Creating users in a status of disabled in IOM

  I'm performing in IOM reconciliation against a flat file that contains employees active and completed. I need to create accounts for employees completed IOM, but these accounts should be disabled until all resources are never placed in service for them.
  
  I tried to create an adapter of pre insertion feature that disables the accounts of employees completed before creating, but I got an error message indicating that you cannot create users in a disabled state.
  
  I then tried using the same entity, like an adapter card after insertion and this with success off the accounts, but is that after already provided resources. I think it's because the adapter is placed below the map to entity tcUSRautoGroupMembership, but I get a security error whenever I try to move the tcUSRautoGroupMembership below my adapter adapter.
  
  Is there a way to disable a newly created user account until it is put into use all resources that are automatically allocated to the unfinished users?

  You can also try to use a deny access policy. If you create a UDF that says start the service or not. You can create an access policy deny for a default value that you provide. Then when you update this field are based on a factor, it will allow other access policies, and to trigger provisioning. You can also create another task triggered the UDF and attach it to the user Xellerate process. On this task, you can check the value when it changes, and if you need to disable objects, you can use the API to find and disable as needed.

  -Kevin

• Error trying to configure user IOM to Active Directory by using SSL

  Hi all
  
  I am able to see users through LDAP over SSL browser but get the following error trying to configure users IOM to RFA by using SSL.
  
  I use Microsoft Active Directory 9.11 connector type.
  
  Answer: Connection error encountered
  Description of the response: error occurred when connecting to the target system
  
  I did a few tests using the "diagnostic dashboard" and here are the results.
  
  Name of the test: target system SSL verification of approval: past
  Name of the test: test basic connectivity: failure
  
  Exceptions:
  

  ITResource of the informative values are not correct. Enter the correct values.
  java.lang.reflect.InvocationTargetException
  javax.naming.CommunicationException: simple bind failed:
  Unable to find the path of valid certification for target asked.

  Name of the test: Test commissioning: failure
  
  Note: Without SLL got past all of the above tests.
  
  
  Can someone help me with this question.
  
  Thanks in advance.
  
  Pradeep Kumar.

  It shows clearly that it is not able to connectto AD to the SSL port.

  What are the values you gave in ADITResource as port no. * 636 * and SSL enabled true/yes etc.

  Are you sure that your certificate is correct and you are able to connect to AD to the port 636?

  JXplorer can test SSL...

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Activate the LDAP SYNCHRONIZATION in IOM 12.1.2.2

  Activate the LDAP SYNCHRONIZATION in IOM.

  Guys, I need help to synchronize ldap for IOM.
  IOM 11.1.2.2
  OID 11.1.1.7

  TPM is not installed where you need adapters?
  I saw all the oracle training documents and they said 'we don't cover ldap Sync in this course.

  I need steps to perform ldap synchronization before the reconciliation... Help, please

  Follow this: https://oracleidm11g.wordpress.com/2014/02/19/80/

  The configuration steps additional pre is IOM + OAM for integration with ldapsync.

• IOM create user CommandToolbarButton customization

  Hi - I'm trying to customize the button create a user on the search page - users.jsff using personalization of sandbox. The required functionality is to have a drop down to appear when you click on the CommandToolBar button (to create), with a list of commandMenuItems. This is the customization that I can insert successfully through customization of Sandbox. However, when I click on the command button, no drop-down list is displayed. Any suggestions?

  < mds:insert parent = "t2" = "last" position >

  " < = xmlns:af af:commandToolbarButton ' http://xmlns.Oracle.com/ADF/faces/rich "text =" users to create the "id ="CUsersCommandButton"> "

  " < = xmlns:af af:showPopupBehavior ' http://xmlns.Oracle.com/ADF/faces/rich "popupId ="testpop"triggerType =" click on "/ > "

  < af:popup id = "testPopup" >

  < af:menu text = "Create User" id = "UserCreate" >

  < af:commandMenuItem text = 'create the Type 1 user '.

  ID = "xxx" icon="/images/addmember.png."

  immediate = "true".

  actionListener =""

  rendering = "true" / >

  < af:commandMenuItem text = "create user Type 2".

  ID = "yyy" icon="/images/addmember.png."

  immediate = "true".

  actionListener =""

  rendering = "true" / >

  < / af:menu >

  < / af:popup >

  < / af:commandToolbarButton >

  < / mds:insert >

  Thank you

  I used the code below in IOM and it worked very well, as expected, you can take this as a reference:

  action = "#{backingBeanScope.proxyBean.searchUsersInOIM}" partialTriggers = "addProxyPC" / > "

  autoHeightRows = "0" >

• Enabling LDAP synchronization after configuration of the IOM in R2

  Friends,
  
  Did anyone tried enabling the LDAP synchronization after configuration of the IOM in R2?
  
  I'm doing the steps the below url.
  
  http://docs.Oracle.com/CD/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
  
  But I'm not finding below.
  
  / db/LDAPUser
  / db/LDAPRole
  / db/LDAPRoleHierarchy
  / db/LDAPRoleMembership
  / DB/RA_LDAPROLE. XML
  / DB/RA_LDAPROLEHIERARCHY. XML
  / DB/RA_LDAPROLEMEMBERSHIP. XML
  / DB/RA_LDAPUSER. XML
  / DB/RA_MLS_LDAPROLE. XML
  / DB/RA_MLS_LDAPUSER. XML
  
  Few of them exist in/metadata/iam-features-ldap-sync, but not all. I'm not find LDAPContrainerRules.xml anywhere at all.
  
  I do something wrong or this documentation is wrong.
  
  Please suggest.

  Another post, try the following
  I do not have the tiried yet, it seems ok. After your results/experiences, must also try.

  Find the detailed steps in the link below
  http://docs.Oracle.com/CD/E27559_01/install.1112/e27301/OIM.htm#CDDGJIBJ
  http://docs.Oracle.com/CD/E14571_01/install.1111/e12002/oidonly014.htm

• Error code: 400 back when create user on the Organization

  I write a simple php code that use the createUser function to create a new user on the body. The following error appears:

  "POST ". https://xx.XX.XX.XX/API/v1.0/Admin/org/1421086956/users failed, return code: error 400,:, request data: User_Full_Name " [email protected] true Pa55w0rd '

  What does this error mean?

  Here is my code:

   
  /**
   * Function to create a VMware_VCloud_API_UserType data object.
   */
  function createUserObj($userName, $password, $role=null, $isEnabled=null, $fullName=null, $emailAddress=null, $description=null) {
      $obj = new VMware_VCloud_API_UserType();
      $obj->set_name($userName);
      $obj->setFullName($fullName);
      $obj->setDescription($description);
      $obj->setPassword($password);
      $obj->setRole($role);
      $obj->setIsEnabled($isEnabled);
      $obj->setEmailAddress($emailAddress);
  
      return $obj;
  }
   
  /**
   * Create a new user on an existing organization.
   */
  try {
      // create a service object
      $service = VMware_VCloud_SDK_Service::getService();
      // login to the service portal,
      $service->login($server, $auth, $httpConfig);
      // create an SDK Admin object
      $sdkAdmin = $service->createSDKAdminObj();
   
      // get references to administrative organization entities
      $adminOrgRefs = $sdkAdmin->getAdminOrgRefs('testOrg1'); // testOrg1 Organization are already created.
      // create SDK AdminOrg object
      $sdkAdminOrg = $service->createSDKObj($adminOrgRefs[0]);
      // get references to roles
      $adminRoleRefs = $sdkAdmin->getRoleRefs('Organization Administrator');
   
      // create a VMware_VCloud_API_UserType data object
      $userObj = createUserObj('API_Sample_user', 'Pa55w0rd', $adminRoleRefs[0], true, 'User_Full_Name', '[email protected]');
      // invoke createUser function on an SDK AdminOrg object
      $user = $sdkAdminOrg->createUser($userObj);
   
      // Print user list
      $userList = $sdkAdminOrg->getUserRefs();
      echo "<br> User List <br>";
      foreach ($userList as $user) {
          echo "{$user->get_name()} <br>";
      }
  } catch (Exception $e) {
      echo $e->getMessage() . "\n";
  }
  
  
  

  Error code 400 is the standard HTTP status code, indicating the incorrect query.

  The problem is when you get a role of reference, the XML tag for this reference is "RoleReference".

  When you create a user, the XML tag that is expected for the role reference is 'Role '.

  So after getting the reference to the role of the admin vCloud (VCloudType) object.

  $adminRoleRefs = $sdkAdmin-> getRoleRefs ('organisation administrator');

  the user must make one more step to convert the tag.

  There are two ways to do this:

  1. with the help of $adminRoleRefs [0]-> set_tagName ('Role');

  or

  2. with the help of VMware_VCloud_SDK_Helper::createReferenceTypeObj ($adminRoleRefs [0]-> get_href());

  I will record a bug in development of the SDK for this question.

  Thank you

  Kimberly

• IOM 9.1.0.1:-create user with approval.

  Guru, Experts,
  
  I am currently using IOM 9.1.0.1, and I want to create the user features to be working with approval. Whenvr a user or xelsysadm attempts to create the user and it must then ask for approval/Rejact then only it will create or deny the operation.
  
  Thank you
  Hemant.

  (1) create a dummy resource, say 'CREATE the RESOURCE USER IOM'... It should be of type 'Order of the organization' and not 'Order for User. Create a model organization, such as CREATE USER ORGANIZATION or better ORGANIZATION OF USER OPERATIONS too for the sole purpose of acceptance of the application.

  In the form of resources either in the form of object, take all required attributes such as user login, first name, last name, organization etc.

  (2) establish an approval process: say "assign system Admin Approval '.

  (3) in the assignment tab, assign the task to the Group--> SYSTEM ADMINISTRATOR (or any other group of your business condition)

  Optionally, you can even send emails too.

  (4) in the process of commissioning, in the stream, flow, the shape of the object in your process.

  (5) in the "Create a user" task, call tcUserOperationsIntf.createUser () and pass all from processes form...

  (6) raises 'request '... Fill in the data... And then approve it... The user must be created...

  (7) in the CREATE USER ORGANIZATION profile resource, the IOM CREATE USER the RESOURCE and the process shape shows all the attributes of the user.