Activate the new device?

Similar Questions

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• System hangs if Linux tries to activate the PCMCIA device

  Hello
  I have a Toshiba Satellite M30X-118 with dual boot Windows XP and linux Suse 6.3 System pro. The problem is with the on board, pcmcia device during installation and start-up when linux tries to activate the pcmcia device, the system hangs... Please if anyone has the same problem and found a solution please share it with me

  Thank you

  Hello

  I'm not a great teacher of Linux, but I found some good sites on this topic.
  Please visit these sites:

  http://pcmcia-cs.sourceforge.NET/man/PCMCIA.5.html

  http://www.buzzard.me.UK/Toshiba/index.html

  http://newsletter.toshiba-tro.de/main/index.html

  Best regards

  Good bye

• I want to buy a legitimate copy for Windows XP. Would I be able to activate the new copy of XP?

  I want to buy a legitimate copy for Windows XP.
  Would I be able to activate the new copy of XP?

  Yes, you will provide that it is a legitimate copy that is already activated on another machine.

  John

• The progress of the installation is blocked on 'the new device is connected now' bar is just reload!

  The progress of the installation is blocked on 'the new device is connected now' bar is just reload! HP laserjet M1132 MFP

  Welcome @HELPMEPLSHSLOL,

  Thank you for your participation in the forums! I see that you are getting the error "new device is now connected" when you try to install the printer software. I'd love to help you.

  If you are using Windows and you're using a USB connection, try the steps in this document: HP Laserjet products - "Device setup has not completed" or the "Unknown device" Message appears in Windows during Installation of USB. If the printer will not be updated of the Manager of devices in the two Solution, make a right click and uninstall the print device. It may be listed as unknown device, USB or Laserjet M1132 print media. Disconnect, then reconnect the USB cable to see if it will continue the installation. If it is not that whatever it is listed for your printer, try another USB port directly on the computer or another USB cable.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected?

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards

• Smartphones from blackBerry App World not generating no new license to the new device Code

  I want to move my old 8900 MyCast Weather on my new 9550 but App World will not produce a new license code and continues to fed the former.  I followed the procedure below has been proposed by Garmin several times and installed, reinstalled, deleted, battery pulls and everything I can think of and nothing works.    Sure would appreciate any suggestions.

  The user goes to a new BlackBerry:

  If the user tries to download App World for the new device and newspapers by virtue
  their PayPal account, you can reinstall each element individually.
  Once installed, the status changes to "installed".  If the user had
  free trial / elements on the previous device, they have to redownload them
  Once again.

  If the status of an item appears as "Not available for this device", the
  point is not compatible with this model of BlackBerry.  If it turns
  available for this device later, the status changes to "uninstalled".
  and it can then be put back.

  The license key will be different for the new device because the PIN on
  the device is different.  The new key is located in the App World of
  choose My-Cast Weather since My World tab.

  Got a new Garmin code that has worked.   Really appreciate the good service from them.   Hopefully RIM will correct the problem with AppWorld soon.   Thanks again for the help.

• How can I get the download instructions if you buy a new computer and edit programs for the new device

  How can I get the download instructions if you buy a new computer and edit programs for the new device

  Download the CS6 products

  Mylenium

• Activate the new app emoji on iPhone 10.0.2.

  How do activate you the new iOS emoji 10.0.2 application?  It's created a problem by not allowing to see the keyboard button in the Messages at the bottom of my phone?

  Hi BrettH1,

  I understand that you are looking for information on emoji usage with your iPhone. I'm happy to help you!

  Take a look at the following site for more information on this topic:

  Use the emoji on your iPhone, iPad and iPod touch - Apple Support

  To answer your second question, please try restarting your iPhone and open your Messages to see if the same behavior persists. If so, capture a screenshot of the problem and post it in your answer. This will help us to better identify the problem. Take a look at this article which goes over how to take a screenshot of your device:
  How to take a screenshot on your iPhone, iPad and iPod touch - Apple Support

  All the best!

• I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

  This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

  Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.

• How to migrate my songs for the new device

  I recently bought a 8 TB external USB hard drive, to replace my old and without SIN, that lasts long, but its slow as me transfers via the network, and now that I have so much music collected, 5 to a value of MP3 I want to move to a USB 3 device that connects locallay to my iMac which is equal to the much faster loading time.

  problem is my SIN was a mapped network drive

  my new camera is an external USB

  How can I tell itunes that all my music I copied on the hard disk of 8 to match the new location without having to massage beginning n?

  I have about 300 playlists

  most all have their album artwork that took me months to do.

  I can't find a way for the life of me, to know how to say my music to itunes or point to the new location. If I remove the SIN, itunes can't see the music and he wants to find, but this requires pointing each track one by one to his new place.

  Music folder structure remained, but instead drive mapped, it is a local usb and I do not understand how to tell itunes to simply look here for my music...

  Instead, he wants me to locate each track... it's crazy.

  is there a simple way to do this?

  or am I obliged to all delete and load each one by one album, create a playlist for it and move on the next album? That's how I did it. If I drag n drop the entire folder 5 TB MP3, it's a mess that itunes can't handle so I load an album, one at a time and create playlist for her. and I hate having to do again for 5 TB of mp3s

  This Apple article should have all the answers to Basic. If you have specific questions, ask!

  How to move your iTunes library to a new computer - Apple Support

• Old games has not transferred to the new device

  Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

  dlb104 wrote:

  Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• Satellite L650 - 1 M 0: could not activate the new wireless card

  Hello

  I replaced the wireless card in the laptop on WiFi + BT (Combo). New brand of laptop do not had favor of BT
  Bluetooth and WiFi work correctly on the system drivers that the system itself.

  The only problem with the new adapter is unable to activate or disable the network modules.
  Since my laptop does not support default BT will automatically turn off the controller module.

  WiFi must be turned off and as in the previous card - a function key. Unfortunately, wireless in the function bar option has disappeared, and the FN + F8 key combination does nothing. Responsible for the light WiFi is on all the time.

  It is possible to activate the WiFi module as before?
  Very please help!

  Laptop: TOSHIBA L650 1 M 0
  The new network adapter: BCM94313HMGB

  Sorry for my bad English.
  I used the Google Translator because I can't speak English. Only the Polish language ;)

  > Is it possible to activate the WiFi module as before?

  You have replaced the WLan module, which means that the hardware configuration has been changed. This means that the different module has affected the functionality of the software.

  The new WLan/BT BCM94313HMGB combo card seems to be designed by Broadcom.
  Of my knowledge that supports most of the laptops Toshiba Intel / modules Realtek or Atheros. This is why I think there may be a compatibility problem between the FN key software and this module.

  Maybe you can try to install the Broadcom driver once more to check if this can help, if not you will have to renounce that.

• Smartphone App World for blackBerry applications does not transfer to the new device (Curve 8330 - Verizon)

  I have a new Blackberry Curve (8330) due to a security problem.  I changed my device PIN via Blacberry BIS - Verizon and my email accounts all function fine.  However, I got a few requests on BB App World which do not appear in 'my account' BB App World.  Is there anything else I need to do to get these apps on my device.  Thanks for any help on this.

  Hello!

  To reinstall your applications, please follow this section of the AppWorld user guide:

  • http://NA.BlackBerry.com/eng/deliverables/7268/re-install_an_item_on_a_different_device_643962_11.js...

  When you connect to AppWorld/MyWorld (via PayPal references), it should get your old PIN of BB AppWorld account to the new.

  For more information, registration keys, see this KB:

  • http://www.BlackBerry.com/BTSC/KB18646

  In some cases, it was discovered that reinstalls / updates (from got AppWorld apps) require additional steps in order to install the update. If the update will not install, please try this:

  1. Homescreen > Options > Advanced Options > Applications > highlight the app > > remove
  2. AppWorld > MyWorld > Login > highlight the app (if she shows at all, in any State) > > remove
  3. Use your PC (via the mass storage Mode) or your BB (via Media > > Explore) and find all references (folders, files) to the app delete everything you find. Search the memory of your device and your press card as well.
  4. Use the link to user guide AppWorld above for re - install the app - then predict a new activation/registration key

  Regarding your question about how long it takes to get a response - it varies considerably. There is no member of RIM assigned paid staff regularly participate in the forums and therefore there is no SLA. The good people who regularly participate on a voluntary basis and spend a lot of time as they can-, but which will naturally be quite variable account held that they must have 'real jobs', as well as personal life. In general, 24 hours is a reasonable period, but may vary as well because of uncontrollable variables in the game.

  See you soon!

• Then try to activate the new computer HP, get invalid installation id

  I have a hp computer brand new and I use it for school and when I tried to activate the lince, he said that I had an id not valid instilaction? I used the internet telaphone.  also, what happens if it turns without a permit?  Thank you, chris.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• How to activate the new button in the Workbench of invoice in Payables in 12.1.1

  Hi all
  
  In accounts payable, the new button in the workbench invoice showing off.
  I use 12.1.1 version.
  Could someone please help me how can I activate this new button.
  I am creating the invoice through workbench invoice no quick Invoice window.
  
  Thank you

  Hello

  This could be due to several reasons...

  Reason n ° 1 = you only access and not allowed to create invoices

  Survey Navigation responsibility for accounts payable = > bills > inquiry > invoices
  Entry Navigation responsibility for accounts payable = > bills > entry > invoices

  Reason 2 = explode on navigation ENTRY you always see the NEW button is disabled, this means
  accounts payable system does not allow the creation of individual bills, you must create only in batch mode.
  Check the value of the profile option ' AP: use invoice batch commands. If the value is YES, it is intentional that NEW button is disabled...

  Reason 3 = you use Navigation entry, your responsibility is not enabled for lots of bills
  The Bill create function could have been excluded from the responsibility...

  Kind regards
  Ivruksha