Photosmart D5160 keeps restarting

Similar Questions

• HP Photosmart D5160 prints everything in red only

  My Photosmart D5160 started printing everything in red. In any document (usually, we print our business letters in black only) red.

  The standard Test page printed from the PROPERTIES tab is completely red, although the Windows logo in the upper right shows a hint of pink and yellow.

  What happened when the cartridges, color and black (genuine HP 344 and 337 respectively) were half full. There is no error message on the D5160 Billboard and the LEVELS of INK display this ink in both.

  There is no configuration setting I see requiring everything to be printed in red.

  I tried a download of the latest driver from HP site... Basic installation failed half way through.

  Then I uninstalled all HP software, removed the printer and tried a reinstall of the base on the site of HP driver (I have more... lost installation CD)... It seemed to work and at the end of the process, it will automatically restart the PC. When Windows came back to the top, it says the installation failed, then he collected information about the problem, sent automatically to Microsoft to see if there is a fix for this problem. He returned and downloaded a fix for the "problem"... Unfortunately, I didn't record what was the known problem. Hotfix installation failed thus leaving me with no printer at all.

  I ran a system restore available promptly to see if I could restore to before the problem of red (I don't remember when he did) - system restore worked and I have a printer installed again, but she still print red only. Red is now counted - so I have cartridges that have a lot of ink, but as the Red runs, I can't print anything.

  Anyone has any idea what the hell is wrong?

  Thank you

  p.s. I'm under Windows XP Home V2002 SP3 with all the latest Microsoft patches up-to-date.

  Try to print a self-test of the only printer page. Maybe it's a hardware problem with the printer itself. If you print the test page and you get the same results in RED, while this isn't your software, it has something to do with your cartridge or print head.

  Even so, full to halfway, you can try to replace the cartridges and see if you get the same result. If you get the same result, it will be your print head.

• Photosmart D5160 "incompatible print settings.

  Have installed my Photosmart D5160 on my new PC running Windows 7 Pro 64 bit.  Just start using the printer to the new computer.

  PROBLEM:

  1 open the HP Solution Center, select the printer, select settings, select the printer settings

  2. Printing shortcuts, select "General impression of every day" and the print quality is set to 'normal '.

  3. I leave the settings of the printer, then go back to the settings of the printer.  The "General everyday printing" shortcut is still selected, but the print quality change DPI Maximum.

  4. when I do a reset on this shortcut, the print quality goes back to normal, but then when I click OK I get the error message following pop up:

  -Incompatible print settings

  -There are one or more conflicting settings

  -one of the conflicting settings is:

  -resolution: 1200 dpi rendered text

  -print quality: normal

  QUESTION:

  How to resolve this conflict?  I wish to have my "normal" print quality

  Thank you

  Angela

  ``````````````````````````````````````````
  old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
  new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM

  RESOLUTION:

  1. start / devices and printers

  2. right click on the prnter icon and select 'delete device '.

  3. are you sure? Yes

  4 restart later

  5. check that the printer icon is more listed under devices and printers

  6. start / right click on computer / properties / Device Manager

  7. develop "USB controllers" and check "USB printing Support" is not listed

  8 disconnect the printer from the rear of the printer USB cable and the computer

  9 reconnect the USB printer to the back of the printer and the computer cable

  10 printer driver facilities

  11 make sure that "USB printing Support" and "Series of HP Photosmart D5100" is listed under Controllers USB in Device Manager

  12. check that the icon for the printer appears under devices and printers

  13. now the printer settings should stay together if necessary (i.e. print quality will remain the Normal value if you selected "General everyday printing" shortcut

• After downloading macos sierra it keeps restarting

  After downloading sierra it keeps restarting after about 30 seconds.

  Start in Recovery (R command) and in the menu dropdown > utilities > disk utility and run the drive on your Macintosh hard disk first aid.

  Recovery http://support.apple.com/kb/HT4718

• iPad 2 keeps restarting while loading

  I was given an iPad 2 and said that it might not work, but I thought it was worth a shot. After plugging in it started but the battery was at 1% and after going through the whole upward for a few minutes, she has restarted itself. I thought that the battery must have has just been completely dead after you have not used for some time.

  I had reset and put to update via iTunes and set up as a new iPad. He managed to do throughout the this without turning off despite only be connected to a USB port I found strange.

  Now I got the charger for nearly an hour and the battery is only 3%, but it still keeps restarting and running with battery at 3%.

  Any idea what could happen?

  EDIT: left in DFU mode for a bit and it is always off

  Since it has been restored as new and the problem persists, we guarantee that it is not software partner. If you have tried a different cable and the problem persists, it is more that likely a problem of material and the iPad will have to be repaired or replaced.

  I would say to contact the Apple Support and run a diagnostic on the device because it can be a simple battery problem.

  Hope this helps

• Drive external DRIVE 320 GB PX1267E - 1 32 keeps restarting

  I have a Toshiba PX1267E - 1 32-hard external drive 320 GB which keeps restarting itself whenever I try to copy large files.

  The whole device became unusable as most of the things I want to backup is more than 2 GB in size.
  AI? ve tried it on 2 computers to another brand and the same problems occur, less with one of the other brand but that is strange?

  Someone else had this problem?

  Hi, I just wanted to ask you which files on your external HARD drive? Maybe there is a problem with it?
  Another suggestion is, back up your data to another medium, go to your local dealer where you bought it and try it. If you encounter the error even by your dealer, then let them trade your car.

  It s better to exchange these stuff like external HDD´s because I lost my files (music and film) since my last external drive had a headcrash. :(

  Welcome them

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Satellite M40 - 277 keeps restarting - button / stop?

  I have the problem that the (per hour to enter acient) laptop Satellite M40 277 of mine keeps restarting unpredictibally. Initially I have if it was a problem of overheating, so I used SpeedFan and CPU-Burn a test, but the computer does not restart until the airflow to the bottom is fine (I consider that the entry of the fan on the bottom a design error, but it's something else). Now, if the air flow is a bit stuffy, the laptop stops at about 83 and then it will have difficulty to challenge. Ok.

  However when the laptop is about 63C it restarts sometimes and I feel, it can be a power button is stuck. I have XP installation so that it will always ask before you actually stop, and when I pick up the phone on the side (the plastic box where the power button is integrated in waiting) I often question of the judgment. NP, just click away. But I also feel that the button can get stuck and then the system turns off after 5 seconds of 'holding company' the power button.

  So I just tried to get a quick glance and we should normally be able to remove the keyboard, but this M40 is a challenge. Even after that the keyboard is free, I don't see the actual power button.

  Is there anyway to loook under high elegant green rim the power button? How to open this thing up?

  Tom

  Hello

  As far as I know this little switch cover is fixed by 6 latches and connected with small flat cable to the motherboard. It just seems but if you don't know how to remove it you can damage these small latches and later you won't be able to fix the new.

  Anyway, if you think that this power button / troubled maybe just make the switch cover replacement may solve the problem.
  What say about it? Try to get the spare part and ask if anyone can exchange it for you.
  Of course, the best thing is to ask for professional help, but it will cool somewhat.

  Another way, do a risk and try to replace one.
  Let me know what you think of this.

  Good bye

• Satellite L655-1E3 keeps restarting in an infinite loop

  Hello

  It seems that I have installed an update of the BIOS not adapted to my Satellite L655 1E3. Now my laptop is never reach the Windows startup and keeps restarting in all about 3 seconds after the Toshiba screen display.

  What I tried to do is reinstall my Windows with the Windows CD: does not not when starting on the CD/DVD

  I still have access to my data located in the hard drive when I took it out of the laptop and makes a transfer on the other hard drive.

  Can you please help me and suggest me some ideas to do?

  > It seems that I have installed an update of the BIOS not adapted to my Satellite L655 1E3.

  I m wondering how could I know if you would try to update the BIOS to the version that is not compatible, the BIOS update procedure would be interrupted and it is not possible to Flash the ROM module
  That is why I think this might be the case.

  However, you said that you see the Toshiba start screen.
  Question: are you able to access the BIOS of the F2 keys?

  In the case where this is possible, the value of the default BIOS and try to start the machine again.
  Where this is not possible, remove the AC adapter and the battery.
  Press and hold the power button / stop along 30 sec. Then reconnect both sides and try to turn on the unit.

  Your comments and good luck would be appreciated

• Equium A60 keeps restarting after installation of the graphics driver ATI

  I have installed the Toshiba ATI graphic driver, but when I restart the laptop, it does not start, keeps restarting before surposed to go on windows XP. Help, please.

  Hello

  Try please solve it as described on this Microsoft article http://support.microsoft.com/?kbid=293078

  Generally, the display driver installation should help. As you know sometimes it is not easy to fix this kind of problem and sometimes is much better recovery procedure.

  You can not write about any common problem if you n t know exactly why this happens. If you are recovering the unit it will be working well. A negative influence on the graphic can have some games preinstalled or many other additional software.

• Satellite A305 keeps restarting

  I have a Satellite A305-s6857.
  Windows xp 64 bit vista.

  This is what is happening, please bare with me it gets really confusing. Laughing out loud

  My laptop keeps restarting on its own.
  at first I thought it was overheating - so I downloaded SPECCY and clean the radiator using carbon Spray. CPU temperature average around 60 degrees.

  so after ANOTHER REFORMAT. the computer worked fine, installed all the drivers using the recovery CD. (computer remained without restarting)
  everything worked well. After you have installed all the drivers, I restarted the computer and it came

  "your account has been disabled. Please contact your system administrater' so I went safe mode created an administrator account.
  Another thing to install TOSHIBA came after rrestarting the computer where I would choose an account name and password.
  so after that I got through the process, he went on the desktop.

  After that, he did it again. Computer keeps restarting, sometimes only takes a few seconds, sumtimes lasts 5 minutes.

  RELATED ISSUE: Tuner FM from Toshiba keeps repeatedly installation and restart the computer.
  then I went to msconfig and disabled everything on start up.

  I don't know much about laptops, but in MY OPINION.

  It is a software problem, VISTA/driver problem, if its vista I think it has something to do with the admin default thing, cus when I am connected to this account, that it has not been restarted.
  but when this thing "account disabled" came and I had to use a new user, he did it again.

  AND ALSO: When in safe MODE, the computer does not restart.

  someone please get back to me.

  Thank you
  Jason winter

  Hello

  > I have a Satellite A305-s6857 running windows xp 64-bit vista.

  What Windows environment it restarts: Win Xp or Vista or both?

  > so after a REFORMATER FEES. the computer worked fine, installed all the drivers using the recovery CD. (a computer stayed on without restart) everything worked fine. After you have installed all the drivers, I restarted the computer and it came

  It looks like a driver/driver causes reboot.

  > SECONDARY QUESTION: Toshiba FM tuner keeps several times install, then by restarting the comp. I went to msconfig and disabled everything on start up

  Can remove you it at all to check?

• My Satellite C660-1LD keeps restarting itself

  My Satellite C660-1LD keeps restarting itself. Does anyone know how to stop this?

  Hello

  What exactly happens? Can you please explain what is happening, but more detailed.

• iPod Classic keeps restarting. Already tried several solutions, I can find.

  My classic iPod keeps restarting randomly. Sometimes he can play for a few hours, other times its a few minutes.

  I got it over a year and he had a spare battery rise (by Apple), in December, but no problems until this week.

  When I plug in my laptop (Windows) it gets usually recognized and appears in iTunes but usually disappears iTunes but says still 'connected' to the screen.

  So far I have tried:

  -Reset the iPod. (sometimes it's very slow)

  -Restore iPod to the factory via iTunes settings.

  -Check MP3 files for MP3 Diags with MP3val errors. Deleted everything that could not be repaired.

  -Put the iPod in disk and search mode of disk errors. No error found.

  Is there anything else that I could try or nobody knows what could cause this problem? Thank you.

  Take a look at Re: corrupted iPod classic. If the device cannot read the part of a multimedia file, it can skip to the next track, but if he struggles to read other data that may cause a reboot.

  TT2

• Mac keeps restarting and is very slow running

  Why not keep restart my mac and works very slow since I installed El Capitan?

  Most likely because you upgraded an already dysfunctional system without the first fix. Or your HARD drive may be faulty.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

  When you get it working properly, and then download and reinstall OS X El Capitan 10.11.3 Combo Update.
  

• Router keeps restarting

  Router R7000 keeps restarting by itself. Called netgear, product being replaced twice, but eventually finds himself in the same situation. Sometimes works for days and then suddenly router keeps restarting itself every couple of minutes or hours. Can't believe router $200 would behave this way. Had changed the router to $30 and works like charm...

  NETGEAR doesn't seem to have any idea, makes me repeat the same steps for troubleshooting the script that I have by heart now.

  Everyone faced with a similar question... .all resolution?

  Hi Prime40633 and rowe100,

  I suggest you contact support as it may be a hardware problem.