Activation of the computer used

Similar Questions

• Unable to connect to the computer using wifi

  A got a new Sony HX30V and tried to use the feature "send to the computer. He is able to connect to the wi - fi home and also able to detect the name of the computer to which it is supposed to transfer the photos to. However, during the process to actually connect to the computer, it throws a "network error" after trying for about 30 seconds. I have Windows 8 running on my system. Any ideas how to solve this?

  After spending hours and hours with exactly the same problem, I found the solution. I tried with 2 computers with different OS, 2 different networks, and I read a lot of posts...

  The problem behind it is that you could not transfer images using WIFI while your computer is also connected via WIFI.  Then:

  (1) connect your computer using the connection of the cable to the access point.

  (2) connect the camera via USB to your computer and make sure that the PlayMemories software detects the camera.

  (3) then, unplug the unit and send images to the computer using WIFI.

  If this does not work because the shipment never ends, and then review:

  (1) the battery should not be weak, or if she is then connect the camera to the power supply.

  (2) the distance from the camera to the access point must be short (maximum of 3 meters), otherwise it is too slow.

• What could change the ID of the computer used for licenses in the License Manager OR?

  the site of our client we initially implemented our software that uses the Vision Run-Time and Acquisition of Vision software.    We bought a license for the PC and it has been installed. He has headed since July.   But today the customer started getting errors requesting the license. using the License Manager, OR we see "status: activated for another computer.

  look no further, we now see a different ID 'computer' code I have original screenshots when I applied the license originally so I know that the ID of the computer was not a typing error.

  The customer says person only has swapped the PC, but is currently looking to see if any work has been done.

  Someone at - it expirenced this before?

  Quote: Your computer ID is based on the MAC address of your Ethernet card. In some cases, your computer ID is based on the disk volume serial number.

  Well, my computer has literally just sat there week and this morning it me that LabVIEW was not enabled.  I do not think that the MAC address or the disc has changed in that time.  But who knows.  Our IT is pretty bad.

• How to activate windows where the key code is how to make one without spending money that I just bought the computer used

  I don't know my key code or how locate it how can I get a code key that I have no credit or debit or money

  Hi John,.

  You can follow the steps in the link below to check if the operating system you are using is enabled or not.

  How to tell if Windows 7 is activated?

  http://Windows.Microsoft.com/en-in/Windows7/how-can-i-tell-if-Windows-7-is-activated

  The steps in the link will help you activate Windows 7, but you must have a product key. If you do not, you need to buy it.

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-in/Windows7/activate-Windows-7-on-this-computer

  Do not hesitate to write to us in case if you have any questions. We will be happy to help you.

• It activated on the computer, or user profile?

  My company has a very simple question that is apparently impossible for chat, phone and Twitter support representatives to meet.

  We have a computer on our domain, who will share people. We want to log in as themselves. We have an admin profile on that we would be activate Photoshop and, possibly, Acrobat. In the past, any user can connect and use the software. He was activated once and saved on the computer. If we did a subscription, is it activated by the user? Should we put up with a shared just profile to use this software? Only 1 person would use it at the same time, and really only if a customer sent us that older versions of file failed to open. It seems crazy to buy multiple licenses for 1 computer, or pay more for a team license.

  This can help:

  FAQ: Where can I find the terms of membership and the terms of use?

  The State of software:

  You can activate the software on up to 2 devices (physical or virtual) at the same time, if these activations are associated with The same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

• How do scan you a document from the printer to the computer using a c5180 all-in-one printer

  I try to scan a document to my HP Photosmart C5180 All In One Printer to my computer and like to know what are the steps to do

  Use the HP Solution Center to scan at the printer to the computer.

  HP this documentexplains how to scan with the HP Solution Center. It is very simple to install and use. Mine is configured as a network printer connected to my Linksys router wireless.

• Free some memory of the computer use?

  How can I free up space for memory and more cleaning disk or Defragmenter, because in my task manager, it says that my use of the computer memory is in the red, and I need to free some memory because I installed just the world of warcraft on my lapto

  Hello

  • What version of Windows are you using?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• OfficeJet Pro 8620: Analysis of problems of printer to the computer using windows 10

  I just upgraded to Windows 10 and now I'm not able to scan from the printer to the computer. I can scan the other way IE. computer to scan but is not as convenient. I had no question before the upgrade. The error message I get is

  
  

  "The analysis could not be performed because of one or more of the following problems:

  -Connection to the computer is lost.

  -L' scanning on the computer application is currently in use.

  -Application OCR is not installed on the computer.

  See the computer for details screen'.

  First of all it is connected with a usb cable, so no logical reason why the connection is lost.

  Secondly it is not used because I am trying to use it

  Third, it has baffled me because there is no reason why the OCR application is now gone, he worked before windows 10.

  and finally there is no detail on the computer screen, why it tells me that I do not understand.

  Any help would be appreciated. Thank you.

  Hello again,

  Looks like the next option is to uninstall & reinstall the printer software. This will ensure that the scan to computer option is restored.

  Please find the link below to install the printing software.

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Note: Esnure that the chosen operating system is win10.

  If you are facing difficulties with the installation or uninstall, please contact HP technical support to the 1-800-474-6836.

  Kind regards

  Ashish

  　

  **************

  I work for HP, here is my point of view only.

• I play with my lap top and accidentally decliques the network to which the computer used, now when I login it doesn't recognize me, I can't even on the desktop to fix

  Microsoft windows xp professional

  Ctrl alt del to access

  and then type the password

  doesn't recognize me any more that I décliqués the wrong box to change the settings of the home network

  Hello
  
  1. is your computer connected to a domain?
  
  If your computer is connected to a domain environment I would ask you to contact the administrator of the computer.
  Your journal Id and password is checked on the network, since you are not able to connect to the network it is why you are unable to connect.
   
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista on the computer using hp laptop and when office comes to the screen after start, all icons and programs are amplified.

  This just happened to new start-up of three days. Prior to this time everything worked very well. Also it some dialog boxes asking to click to launch an application platform that we know nothing about. We have looked for answers and went to the Control Panel, easy access and off Magnifier. But it is magnified. All icons and applications and the magnified programs.are. No new programs have been installed, no fonts won't changed, none of the DPI changed by us. . Some have suggested to go into the registry, but I'm not here. There are available restore points to restore. I don't know why there are no restore points.  Even went in safe mode and couldn't find the restore point. Our solutions may be next = copy data, use the restore disk, and all reinstall. GOSH, there must be an easier than treatment... Or go to the computer repair shop. Suggestions? Please, I beg you!

  I am not literate live windows, the problem is on a computer hp laptop that belongs to my wife. My computer is old desktop with xp. I just do e-mail, word processing and accounting and taxes, etc. Nothing very sophisticated. My experience started with the BACK and readers of diskettes, then on all readers, then for win 3.11, 95 and xp. I don't like vista. I'm waitng for win8 get a new box. Thank you.

  On Saturday, February 18, 2012 23:24:44 + 0000, decafeinepeuvent wrote:

  One of the answers was suppsoed to you also. Sorry, I guess that I have selected the wrong answer area.

  Thanks for responding!

  You're welcome, and I saw your other answers you have chosen
  doesn't matter much.

  You might want to try adjusting the resolution anyway.

  Ken Blake, Microsoft MVP

• I have a problem with the connection to the computer using the password.

  Original title: I gave my sister, my old laptop and it can not open the pc, it won't take the password? Help

  I had a Toshiba C655-F5507 and gave him too my sister, but before doing so I spilled, cleaned and re-installed system win8 on it. as we know that you must use a password to enter even, I replaced my old password and name, reintroduced his name and a new password and it worked while she was here visiting, but once home he would not open upward, then he says to type the old password and she did and it does not work , so she has a laptop useless that you can not use because win8 has this block (why I don't know because its for home use non-nuclear secrets) so please help with a fix!

  I had a Toshiba C655-F5507 and gave him too my sister, but before doing so I spilled, cleaned and re-installed system win8 on it. as we know that you must use a password to enter even, I replaced my old password and name, reintroduced his name and a new password and it worked while she was here visiting, but once home he would not open upward, then he says to type the old password and she did and it does not work , so she has a laptop useless that you can not use because win8 has this block (why I don't know because its for home use non-nuclear secrets) so please help with a fix!

  Hello
   
  Sorry, but the political forum do not allow any information for the recovery of passwords. This is necessary because of the anonymous nature of these forums.
   
  In this case, the best solution is to take the computer to a local computer repair shop and ask them to retrieve the password for you.

  These forums and Microsoft have a software cracking password policy.

  Please visit the following links.

  Password answers community support strategy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords

  Concerning

• Synchronization and backup from iPad to the computer using iTunes

  Since the last update, last week, did someone else with problems of synchronization/backup of their Air iPad with their computer via iTunes?  iPad OS 10.0.2, iMac OS X Lion 10.7.5 Air (updates is no longer available for this computer). I had no problem before this last update.  -Pop-up message on the computer: "iTunes could not connect to the iPad...". my name... because an invalid response was received from the device. ' Pop up message on the iPad at the same time: "trust to this computer?  Your settings and your data will be available from this computer when connected.  "Option click on TRUST or don't trust.   I clicked on the TRUST several times without success.  Please help me if you can.  Thank you.

  There is no alternatives that save to iCloud instead of it, or upgrade your software and/or hardware to run a newer version of iTunes.  iOS 10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.

• connect to the computer using a usb cable, not recognized by the computer

  Hello

  the ZTE open, I already checked the "usb mode" in the settings, but the computer can not see my storage when it is connected by a usb cable, so I can't transfer any file on.

  Draft of microSD on the device is quite embarrassing, an idea?

  Ah, never mind, just, it fixed itself. None.

• Maximum time that my processor of the computer used 100% in windows XP.

  CPU P4 2.34

  1 GB OF RAM
  Windows Xp.

  Hi Andrew,

  What I understand from the information you provide is that the computer does not work as expected and that the CPU usage is high most of the time.

  If that's what the issue is, I would say you have to go through this article and see if it helps.

  If it doesn't then please respond with more information on the question if we can help you best.

  Thank you!

• Could not start the computer using the normal error 0x800106ba and 0x80070426

  Original title: Code 10 and error code Window Vista

  Hello

  I'm loading up on safe mode with network.  When I tried to laod normal I get a blank screen and after I sign-in is on Safe Mode.

  I got error 0x800106ba and 0x80070426 messages and I just opened the Device Manager and found this security processor laoader driver code 10.

  Since then, I have installed a constant guard with Comcast meet all what I had problem with my system.  I called tech support and they won't help because they say that I have problems with my Dell Inspiron 530 problems I describe with the PC and not releated to each software.   If anyone can help.  In August 6, 2012, I ran diagnostic memory without any problem what so ever. I have no idea what else to do for these problems, suggestions please let me know.  Thank you

  Elizabeth

  Hi Elizabeth,.

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse and try to start the computer in normal mode.

  Method 2: Start your computer in last known good configuration.

  Method 3: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 4: Follow the steps in the article.

  What to do if Windows does not start correctly