Activation of the LAN after reinstalling Windows - Satellite Pro A10

Similar Questions

• How to install the adapter wireless network in Satellite Pro A10

  I'm trying to set up a wireless connection with my Satellite Pro A10. I thought it was active wireless, but when I switch the wireless switch, no light comes on and there is no card listed under network adapters wireless (so I guess not).

  Is it easy to install a wireless adapter (i.e. can I do it myself or I must be done by a professional)? Can anyone recommend what card I should by (or any other that I should avoid)?

  Thank you.

  Hello

  According to the specification of the specifications your A10 Pro Satellite is WLAN ready. In notebook specification it has listed two compatible WIFI cards:
  PA3212U-4MPC (Agere 802. 11b) and PA3273U-2MPC (802. 11a / b).

  I don't really know if you can use some faster wireless network cards with the g standard. You may be lucky and someone will post here results update WLAN card.

  I'm not sure 100% where the WLAN slot is placed but check it please under the lid placed close to the battery.

• Can I upgrade or change the graphics card on my Satellite Pro A10

  All the spec on my machine goes on the system requirements to run most of the games.

  Currently its at 64 MB and has an Intel graphics card
  but I was wondering if this can be changed completaly or memory GPU upgraded on a satellite Pro A10?

  Any help and advice would be grateful.

  PS: Please forgive any spleeing stupid mistakes thanks: P

  Hello

  Unfortunately, upgrading the graphics card is not possible.
  The GPU chip is fixed simply (I think that it welded s) on the motherboard and cannot be deleted.

  Best regards

• Get my data sorted after recovering the pc after reinstalling windows xp recovery disk

  Hello

  I have an advent 3217 running xp sp3 and after the most recent windows update failed I put on by accident and was then trapped in a reboot loop who gave me an error code of c000021a. I tried pressing F8 and try all the options, but nothing worked. So I used my advent recovery disk that came with my pc to perform a RECOVERY of SYSTEM NON-FORMAT that got my pc to the top and run it again, but completely back to basics. I now have a folder in my hard drive called (MY OLD DISK STRUCTURE) which has all the data from my old and while she.

  Is it possible to simply transfer everything back to the new folder of Windows, restart and have everything back to normal or not?

  Need help... anyone?

  Thank you

  Unliklely that might work.

  Find your stuff (under "Online and Settings\" and copy that you go back to your new configuration.)

  Although it is nice they have presented you a non-destructive system restore ("Advent" I guess...)  A repair facility with a real Windows XP installation CD would probably have been less destructive/disruptive.  :-(

• Restart the problem after booting on Satellite Pro L20 - approx. 4 seconds

  I have a toshiba satellite pro l20 series and it worked fine until yesterday.
  the problem is that it restarts... Well actually, he stops in about 4 seconds after the start, remains closed for 1 or 2 seconds and then again
  same problem occurs with or without the battery.
  all I see is the Toshiba logo. I can enter the bios and when in the bios it does not stop.
  When I get out of the bios, saving the changes he stops. and then begins by itsself after 2 seconds.
  Please help me... How can I fix?

  Hello

  If the laptop goes through the Toshiba logo then maybe there is just something wrong with the software.
  In this case, the first step should be again install the Toshiba Recovery CD.
  Put the CD in the drive and try to boot from the CD.
  After installation, all should work properly.
  If it's not, so I guess there is a serious problem and service guys should check the laptop.

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Activation of the AHCI after installing Windows XP on Satellite L300-19Y

  So, I picked up this laptop used which has Vista installed on it. I got rid of him, but being not able to install XP I put the laptop in compatibility mode and then installed without problem until I relealised I need to install the SATA drivers as performance was not that great. So I found a way that is similar to many others on the internet just slightly different.

  It works for the controller intel which will have the model in the title. Its the controller ICH9M-E/M that I used this method with.

  # Go to the Intel website and the location of the chipset you have. With this model is the series 4 and select Windows XP as OS. (http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Chipsets& ProductLine = cell + Chipsets & ProductProduct = Intel Mobile + % C2% AE + 4 + series + Express + Chipset + family & ProdId = 2991 & LineId = 1088 & FamilyId = 40)
  # Download the drivers from RapidStore F6. It will come in a ZIP file that you need to extract. There will be a series of files in this
  # Then open device under ATA/ATAPI IDE right-click controllers Manager > properties for your controller. She should have ICH9 in the title. And then click driver > update driver
  # The wizard opens, don't go on the internet, press Next, then select install from a specific location > don't search, I will choose the driver to install. Click Next, and then click Have Disk
  # And then navigate to the folder where you extract the files and select the file iaAHCI.inf. It will bring up a list of driver files, you should select one that suits. For the listed model, it will be pilot ICH9M-E/M that will work. Select it and it will install. If it's the wrong file, you will get the BSOD immediately.
  # Restart the computer, go into the BIOS change to AHCI. Then start Windows, it should start. If you have the BSOD, then return to testing and compatibility mode method, but select the iaStor.inf file again.
  # Once the computer has started, launch the Intel Matrix Storage software to make sure that the power is saved. We can say that you replace the file with an older, just replace it for now, so that the registry database is correctly updated. Then after rebooting, use the Update Driver Wizard using the new driver. This has worked well for that day and will result in that you don't have to reinstall the entire operating system to get the drivers
  I found the computer started much faster. The process is similar for all Chipset Intel machines, you just need to make sure that you are able to choose the correct driver.

  Thanks a lot for this interesting publication, naza911. Nice to hear that enabling AHCI works after XP installation.

  This thread is useful for other users of L300 I think or let's say ;) for all computers with AHCI and Windows XP

• Activation key is invalid after reinstalling Windows 7?

  So today, I traded one of the my laptop a new SSD HARD drives and do a clean installation of Windows by downloading an ISO clean, non-modified and write my activation key, and it installed fine, however, trying to turn it on, I get a message saying that my key is invalid for activation. Should I start my old HDD and first disable the original copy? Because I don't like * not to spend money on another key for this crap OS, especially given how much they cost generally.

  the key to your report is an OEM SLP key. an OEM SLP key only works with the manufacturers recovery media.

  You can use the key to your COST.

• Error access denied when I tried to restore my files saved on the computer after reinstalling Windows 7

  Hi all

  I had to re install my windows 7, so I copied all my desktop files to my external HARD drive and from the new facility, I could not backup or even open most files file (most of them are PDF and JPG files) with annoying error access is denied. I have changed the ownership of these files on my user account and grant me full control over files and the same error still there.
  Also, I enabled the administrator account and tried to open the files with it and without change, also tried in safe mode.
  Any help?
  Thanks and greetings
  Nour
  
  Original title: access Denies

  Nour,

  Try here:

  http://support.Microsoft.com/kb/2623670>

  `~`

  The current time and the date now in Baja California, Mexico

  18:39

  Thursday, August 8, 2013
  DST - 0700 UTC

  UTC/GMT is 01:39 Friday, August 9, 2013

  Current weather conditions in San Felipe

  Sunny106 ° C / 41 ° C

• Photoshop CS5 for Mac.  Is no longer able to open the program after reinstalling on MacBook Pro.  Download the message «end of file unexpected met»  Then get "failed to initialize Photoshop because the preferences file was invalid (it has been removed)." 

  Someone at - it advice on how to open Photoshop CS5 for Mac.  Is no longer able to open the program.  Just get the emblem of blue PS and the message "unable to load actions because an end of life unexpected has been met.  Could not initialize Photoshop because the preferences file was invalid (it has been deleted). "I tried to reinstall the program from the original disc.  Is this a problem with the operating system?  Thanks for any idea.

  Now try control-alt-shift key (Ctrl-alt-shift on Windows) and start Photoshop. An option button will open and opt for delete the settings file - see if that helps any.

  Terri

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Satellite Pro A10: No sound after upgrade to Windows XP Home SP2

  Hello

  Just use the recovery disks on my Satellite Pro A10, no problem with the sound, and then upgraded to XP Home with SP2, no noise.

  What I've read elsewhere, this is a problem and there seems to be an answer. I spent hours looking for drivers updated without success.

  I have also contacted Toshiba support, after blow and blow that they reported the following driver, 5.12.01.3542, which is the same one that I have already installed and does not work.

  Certainly there must be something out there that works.

  Ant.

  Install the driver of his most recent available FRO this sound chip and perform all the Windows updates available on the Microsoft page!

  Update just the BONES together!
  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Notes; You may have to restart the laptop and need to connect to this site several times to get all available patches.

• Satellite Pro A10 - no sound and the volume is enough

  Hello

  Recently, the sound quality of my satellite Pro A10 began to get grainy and this which resembled your comments, but the volume was not high and not so long ago
  order completaly.

  Ive reinstalled the sound drivers and it worked
  perfect for about half a day and was silent again.
  I tried to use headphones and still no sound.

  help would be very nice.

  PS. Please excuse the wrong spelling: P

  Hey Buddy,

  Following suggestions:

  1. recovery of your machine COMPLETELY and check if it work s
  2. in the case of no success, try a BIOS update and check again
  3. If the previous steps didn t have worked, visit the following site and contact a service partner authorized in your country for material balance / repair:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Need to know the model of display driver for Satellite Pro A10

  Hello! I'll try to find the exact display on my satellite pro A10 chipset model. The driver on the toshiba site is not updated, and I can't use the correct resolution (19 "Wide or 1440 x 900) on my external display.
  At the same time before I was able to update the driver correctly, just the search for generic driver "Intel 82852/82855 GM/GME" and software "extreme graphics" at the Intel Web site.
  But now, on the Intel site that they ask the exact model, which means that, if she is 82852 or 82855, and if it is GM or GME...
  Can U give the specific model please?
  My computer is a celeron 2500 MHz with 1 GB RAM and 30 GB HARD drive (standard)

  Thanks in advance...

  I found some details on this device and it seems that the laptop was equipped with the internal graphics controller Intel 852GM; code name: Montara GML

• Satellite Pro A10 PSA15E: Encryption WPA WLan is missing

  I reinstall a Satellite Pro A10 PSA15E-018PC-OF.
  The problem I have is to get the WPA available for the wireless network card.
  Do I did wrong.
  Reinstallation of XP SP2 full.
  Installed Toshiba drivers. I used the drivers Intel Pro set.

  There is nothing wrong! WiFi encryption type depends on the WLan card specifications and not the driver WLan.

  If the equipment (WLan card) does not support WPA encryption, then you will be not able to use it! The update of the driver won't help you!

  You need to replace the WLan card with another that supports WPA or you are going to buy additional WLan USB key that supports this encryption too.