Satellite Pro A10 - no sound and the volume is enough

Similar Questions

• Satellite Pro A10: No sound after upgrade to Windows XP Home SP2

  Hello

  Just use the recovery disks on my Satellite Pro A10, no problem with the sound, and then upgraded to XP Home with SP2, no noise.

  What I've read elsewhere, this is a problem and there seems to be an answer. I spent hours looking for drivers updated without success.

  I have also contacted Toshiba support, after blow and blow that they reported the following driver, 5.12.01.3542, which is the same one that I have already installed and does not work.

  Certainly there must be something out there that works.

  Ant.

  Install the driver of his most recent available FRO this sound chip and perform all the Windows updates available on the Microsoft page!

  Update just the BONES together!
  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Notes; You may have to restart the laptop and need to connect to this site several times to get all available patches.

• Satellite Pro A10 - no sound?

  Hello
  I have a Satellite Pro A10. For some reason, the computer plays no sound whatsoever. This includes CDs, DVDs, windows startup intro, no sounds of online video.
  Ideas for basic checks for me please?
  Big thank you.

  Hi, I have the same problem myself! I tried everything but nothing helps, some bitten computer tell me it's a chip that has blown on the main map, I thought it would be cheaper to buy a new laptop than to get it fixed!

  a mine for less than a year - the power supply died after a few months - the mouse pad has been temperamental for a few months and now this! good luck with it, if you hear of any cheap magicians who can fix it then let me know!

• Satellite Pro A10 does not pass the Windows page after removing SP2

  Hello

  I have a toshiba laptop Satellite Pro A10.
  I installed windows service pack 2 week last to try to get one of these dongles TNT to work, he never so I uninstalled service pack 2 I was going to try and reinstall it to see if it would work.

  Now, my problem is that the laptop will not go at all, it gets to the windows XP page and then everything stops, someone could help me I don't know what to do!

  Thank you
  Sharon

  Hi Sharon

  Seems that the system files are corrupted on the HARD drive.
  All of the installation and the removal of the service pack has damaged some files or registry entries.

  I don t think you will be able to resolve this situation without reinstalling the OS.
  In my opinion, it's a better way to get rid of this problem.

  Take the Toshiba Recovery CD and reinstall everything.
  If you want to back up your data, I recommend to connect the internal HARD drive to another computer via the external USB HDD controller.

  Good luck

• Satellite Pro A10 - where to find the drivers

  Hello

  I have an A10 Pro Satellite I am trying to set up for a Christmas gift for my daughter, but I'm unable to do to go on line.

  I was told that I need the drivers for it.
  I was looking at this forum and I went to the download page mentioned in the discussions I've read.

  I tried to fill in the form to identify the drivers I need, but I was not able to find the good ones, as I can't find the model in the menu drop down it returns a lot of possible drivers. I downloaded a few of them on a flash drive and tried to download on the Toshiba laptop, but with no joy.

  Please can someone help me identify the correct drivers that I need to help me configure the laptop?
  Sorry to be so dence but his father and I don't know anything to do a laptop internet ready.

  Bio

  Hello

  The drivers for this laptop are on the European driver Toshiba page.
  This book belongs to a series of older and so you can find the drivers in the area of the ARCHIVE.

  Check this box:
  http://EU.computers.Toshiba-Europe.com/-> support download &-> download drivers

  Here, you have to choose:
  Archive-> Satellite Pro-> A-> Satellite Pro A10 Satellite Pro

  You can connect this laptop to the router using the LAN port.

  I m not very well if you'll be able to connect the laptop to the router using the WiFi because that card WLan was optional on this laptop and possibly there is no WLan card.

  If you want to check if the wireless card is installed, then you should check the device-> maps network manager
  LAN and WLan card must be registered.

  Good bye

• Satellite Pro A10: Error when loading the drivers and other things

  Hello.
  I just bought a spare A10 to ebay. I already have an A10 and the company. Powering up the new A10, I have a bubble message from microsoft saying that it was unable to load the drivers for the cd burning software, please update the drivers. If I click on the bubble it says to update of real player, roxio or other recording software.

  As I did not immediately and there not there when bought. Its not broken, its all just annoying. Also when I right click anywhere on the desktop, in the coloum that you see, I get a link to an adult site, how can I get rid of this?

  I want to thank you for taking the time to read this and would be grateful if you could help.

  Jack.

  Hi Jack,

  I suggest you to check what is actually underway when you start your new A10 using MSCONFIG. This will then stop these tasks that you do not want to be started up and should prevent your error message displayed.

  I also suggest you download and install a copy of AdAware http://www.lavasoft.com (and perhaps also http://www.spybot.info/en/download/index.html SpyBot) and do a check complete of your new A10 to remove any nasties that may be hiding there.

  It seems that if the previous owner has removed some of the software they had installed, but is not completely cleaned afterwards.

  Finally, I personally use a freeware CCleaner http://www.ccleaner.com/ for utility call which is excellent to remove the pieces left over on my laptop. It must be treated with some caution, because it is a powerful utility, but it is very quick and thorough.

  Kind regards

• Satellite Pro S200 - how to disable the volume button digital on the screen

  Hello

  I have a Satellite Pro S200,

  I'm unhappy with my digital volume.
  Dial whenever I work the volume control.
  Is there a way to disable this annoying feature?

  was soon simon

  Hello

  The volume indicator belongs to the Toshiba control utility.
  The exe file is called Volumeindicator.exe

  On my laptop, this tool is running in the background of the OS and I can disable in msconfig-> Startup tab

  Select this check box.
  Run msconfig, go to the Startup tab and uncheck the Volumeindicator.
  Then, you will have to start again.

• Satellite Pro A300 - nasal sound if the WIFI is enabled

  School, I work has recently bought some A300s, but when they turn them on, all sounds are stuttering.

  This is the jingle of Windows startup, the CD and DVD, and programs installed on the computer laptop itself. The only way I can stop the sound problems is by disabling the wireless lan. I tried to uninstall and reinstall, update the driver, replace the driver, but all without success. The school network is wireless so disable the wireless LAN cards long isn't really an option.

  Anyone got any ideas?

  Hey xarkaltos,

  It would be interesting to know what OS you are using. I have too many Satellite Pro A300 and I can t t notice nasal sound if the WIFI is enabled. My A300 works pretty well and doesn't make strange sounds.

  Maybe you have installed another OS, if you restore the OS from Toshiba by using the recovery disc or HARD drive recovery option.
  Otherwise, follow the instructions posted by Al - eX.

• Satellite Pro L20 - no sound from the front speakers

  I just bought the laptop L20. Everything works fine apart from the front speakers. I don't get all the sounds on their part. Sound works very well since the head phone jack. I ran that the Toshiba diagnostic test and has not made all the sounds either. In the volume control window each volume slider is up and the Mute check boxes are checked. The obvious problem only in the window volume control which is the "PC Speaker" section is grayed out and cannot be selected. I installed the latest version of BIOS and drivers audio Toshiba Web site but not joy. Am I missing something obvious here? Any help would be appreciated.

  Hello

  If the sound works fine through headphones so I guess we're all ok with the onboard sound.
  There may be a malfunction of the speaker. If the laptop is under warranty all replacements are performed free of charge.
  The speakers are not very expensive and you should ask the service to help him.

• Satellite Pro P100-439: sound and modem driver for Windows XP?

  Hello

  I need for my his laptop and drivers for the Modem.

  Thanks for the help

  Edit: I come from Germany, sorry for my bad English. :)

  I presume you bought Satellite P100 and no Satellite Pro P100. Am I wrong?

  In any case, if your P100 laptop is Vista preinstalled laptop, you may have problem because right now all new laptops Vista are not taken WXP supported. Of course, it will take a little time to have drivers of Windows XP Home edition.

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• Satellite Pro A10 - how to remove the optical drive?

  Can anyone give me some advice here please. I am trying to remove the DVD drive existing my A10. I removed the screws of restraint, but the Player cannot slide out. I checked for other screws but have found nothing.
  Any help or advice would be greatly appreciated.

  Hello

  As far that know that a single screw fix the drive.
  Turn the face of the computer down and remove the two screws fixing the CD-ROM
  Drive.
  Turn on the computer to face and open the display. Press towards the Group of CD-ROM drive and disconnect all of CD-ROM drive in the PJ1800 on the system board. Remove the two screws which support CD-ROM of the entire disc CD-ROM. Remove fixing two screws fixing the support side and remove the lateral support.

  All that s

• Satellite L300 has no sound and the modem also does not work

  I have this Toshiba Satellite L300 (PSLB8A - 1F004) an Australian model who was working perfectly until I changed the hard drive after he developed bad sectors.
  I installed Win Vista Business.

  I have all drivers (TOSAPINS file) provided with the original hard drive, but when I installed the drivers in the correct order. IE chipset, modules, audio, modem, and all the other pilots.

  There is still a little red x on the taskbar saying: "no audio output device is installed" and I also noticed that the modem is not listed in Device Manager. I also tried to replace a work from a cell phone same model modem card, but it still shows no signs of picking up the modem as well as his driver.

  I made the attempt to download the drivers from mytoshiba.com.au under the exact model and the OS and installed but nothing helps, the problem is still there.

  No sign of modem picked up and the little red x on the taskbar always shows "no audio output device is installed" and on Device Manager, is not to show the audio or modem. There is also nothing in the typical yellow marks and also I tried to show hidden devices but there is still no sign.

  Is there something else I missed that I can try again?

  WewakMaster

  I agree, with Akuma. First remove the audio controller from Device Manager (can be found under audio and game controllers).

  Then update the Vista of the State. All patches and Service Packs must be installed.
  Then, restart the device and install the driver Audio from Realtek ALC268 from here:
  http://www.MyToshiba.com.au/support/computers/satellite/L300/pslb8a-01f004/download?OS=15

  Should work

• Satellite Pro A10 - how to upgrade the RAM?

  How I'm sure that when I go buy the memory that it adapts to the motherboard. ?
  Sorry for my bad English

  Is it enough to know that its DDR motherboard?

  Hi kichenin

  Until you buy new RAM modules, you should check out what specifications you need and how much memory is taken in charge.

  I checked the specs on the Web from Toshiba site and your laptop supports up to 1 GB of RAM. The specification for the RAM is PC2100 DDR - RAM. You can also buy some RAM with higher specifications (PC2700 or PC3200), but they will operate at the speed of the PC2100.

  Recommend brand for Kingston memory for example.

• Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

  Hi all.

  I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

  I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

  Thanks in advance.

  The problem is simple.
  Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

  The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

  In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

  Mayen a user manual would provide details on the management of records.
  If not, then contact the ASP in your country and ask some compatible devices!

  At soon buddy