activation of the older software

Similar Questions

• Problem in installing the older software

  Recently, I bought computer dell laptop with original windows 7... My problem is cannot install the old software I used Windows xp... everyone will tell me the solution for this... The following software are examples...

  software wincc from Siemens, Keyence simulation software

  Search for updates for these products, which are running Windows 7, or see if they'll work in compatibility mode.  Assistance with the compatibility mode on the start ORB, then raise help and Support, and then search for "Compatibility Mode".  Many programs that directly affect the hardware will not work under Windows 7 due to changes in device drivers and hardware access low level.

  'rulu' wrote in the new message: * e-mail address is removed from the privacy... *

  Recently, I bought computer dell laptop with original windows 7... My problem is cannot install the old software I used Windows xp... everyone will tell me the solution for this... The following software are examples...

  software wincc from Siemens, Keyence simulation software

• My activation of the old software photoshop after the computer has crashed

  I have a valid software I have purshased and I regerstered in your system, but I can not reactvate the software I tried to use the chat and they told me to use the forums!

  Thank you

  Frank H. Shaw

  It's the CS2. Adobe has disabled the server activation of CS2 in December 2012.

  Now, you need to download a new version of without activation (free) from Adobe and to use a new series without activation number provided by Adobe to its current customers.

  See

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://www.Adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

• After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

  After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  --------------------

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  --------------------------

• try to reinstall CS on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. My hard drive crashed with all my software on it, then

  Hello - I'm trying to reinstall CS3 on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. (compatibility).  My hard drive crashed with all my top software, so I replaced the drive and now trying to reinstall my CS3. How can I do this without an internet connection? It will not take my initial activation codes, and this computer is not online. pointers out there?

  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Tried the updated software: your ipad could not be activated because the activation server is unavailable tempoarily

  Received error msg after trying to upgrade to the latest version of the software for the iPad.

  Your iPad could not be activated because the activation server is temporarily unavailable.

  What is the problem have never had a problem with the update of the software before.

  There is a problem known/glitch with Apple activation servers.

  Apple, I think, has recognized and acknowledged this problem with difficulties with some models of iPad activation server and have stated that they are working on this issue and it will be resolved as soon as possible.

  I hope more early.

• Activation of the software window taken by another pop-up window

  A pc of windows 7 that is running mainly with 2 software. 1 software mainly works automatically and 2nd software works mainly by the keyboard.
  1 software 2 calls and a 2nd window pop up with maximum activated window. But after 2 ~ 3 seconds 1 software generated another window for key in the texts.
  That's why this new pop-up had the 2nd software activation. Any type of keyboard will be key in the new window.
  Is possible to fix the activation window until the finished software work and minimize the himself?

  I tried registy keyword "ForegroundLockTimeout" under HKEY_CURRENT_USER\Control Panel\Desktop and change the value of 200000, but failed.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you want to place the window with the current task on the foreground of the screen. According to the description, you changed "ForegroundLockTimeout" value in the registry settings. But I suggest you to check with the two keys: 'County of Flash of foreground' and 'foreground Lock timeout'.

  To check the correct values depending on your condition, I suggest you to consult the following Microsoft TechNet articles and check if these values are useful.

  • http://TechNet.Microsoft.com/en-us/library/cc957205.aspx
  • http://TechNet.Microsoft.com/en-us/library/cc957208.aspx

  If the values differ from the default values you can double-click the name and change the values. Make sure that you make the decimal selection and then change the values.

  Warning important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Is it possible to get the activation code of the older PC so that I can use it in my class?

  Original title: Activation of Windows 8.

  If there is some time I had windows 8 pro to use in my construction of future games. Not knowing I could install it on 1 computer (thought it would be at least 2) I installed it as a test on my desktop PC previos where it has not yet run properly cause it was an older model (and if you haven't used since then, cause I have a laptop with Windows7). But now my PC gaming is finished and I suddenly find I could activate only on 1 PC.

  So my question is. Is it possible to get the activation code of the older PCs (that I use even more, maybe even remove it) so that I can use it in my class? Or that the activation code and the money just went in the toilet?
  I could install Windows 7 to 2 different PC-s(didn't try more cause there was no need) with no problems and it wasen can't pack family, why is Windows 8 different? Sometimes errors occur.
  Ask cause I went all on buy the parts, I have no money to buy a new copy of windows 8.
  Awayting for your answers.
  Thank you
  Edit! Maybe I'm a solution. Going to try it out after I return to work.
  It's the solution

  "I have Windows 8/8 Pro is installed on my PC." If I replace with another PC, can I install my copy of Windows 8 on my new PC until I remove it from the other? »

  Yes. The highest point is the one you mentioned: you must remove Windows 8 from your old computer before you activate on the new. In other words, you can have your copy of Windows 8 or Windows 8 Pro running on a single computer at a time.

  Another thing to keep in mind is that if you have installed an upgrade copy under license of Windows 8 on a computer and then you want to use it on another computer, the same 'upgrade' rules apply: you must have a previous version of Windows on the computer before you install Windows 8. You can ignore this rule, if you started with Windows 8.1

  Important: You can't "move" Windows 8 or Windows 8 Pro on another computer if your computer is pre-installed with Windows 8. Your copy of Windows 8 is what OEM licensed which means that you are allowed to use Windows 8 on the computer on which he came already installed on.

  "How many times can I reinstall Windows 8 on another computer? Assuming I follow the rule 'uninstall old installation', peux I keep installing Windows 8 on different computers? »

  There is no limit to the number of computers that you reinstall Windows 8 on as long as you follow the rules, that I discussed in the last question.
   

  Hi NeemeK,

  We appreciate the research you have done to find more information on this issue. The information you found were correct.

  OEM product key can only be used with the computer on which it is installed on.

  When the operating system is not active (uninstalled) in the old computer, you can install it on the new computer. This applies to any number of computers you use.

  If you get any errors, you can perform the activation of the phone.

  http://support.Microsoft.com/kb/950929/en-us

  Hope that the information provided is useful. Do not respond if you need more help.

• I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my order

  I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my software. I can't afford a monthly payment with Adobe Cloud. How can I get my software activated so I can use it? Thank you.

  Please follow the steps described in this document - error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

  Thank you

  Bev

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Activation of the software Adobe Photoshop CS2

  Dear Sir.

  I know that my product is an old version, but I need to activate my user to use after you have reinstalled in a new PC but has detected the error. I also try the activation of the phone, but he says is no longer available and direct me towards www.adobe.com/go/activation

  Can anyone help on this? TQ

  

  Adobe disabled the activation for cs2 server, you must download and install a version of no activation of cs2 to replace your old cs2.

  Use the serial number provided. not your old serial number.

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Fire destroyed the computer, software, documents. Adobe can have my subscription for 3 Photoshop CS4 documents?

  Fire destroyed the computer, software, documents. Adobe can have my subscription for 3 Photoshop CS4 documents?

  Adobe will honor my membership by downloading CS4 and activating the latter?

  You need to contact Adobe directly for this kind of request, but I don't hold much hope.  They no longer support the older products and are more likely to get that back here as soon as you mention nothing other than to request a reset of your activation.  If they send you back here, I recommend trying to find a member of staff and private messaging to see if they'll lend a hand.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• It activated on the computer, or user profile?

  My company has a very simple question that is apparently impossible for chat, phone and Twitter support representatives to meet.

  We have a computer on our domain, who will share people. We want to log in as themselves. We have an admin profile on that we would be activate Photoshop and, possibly, Acrobat. In the past, any user can connect and use the software. He was activated once and saved on the computer. If we did a subscription, is it activated by the user? Should we put up with a shared just profile to use this software? Only 1 person would use it at the same time, and really only if a customer sent us that older versions of file failed to open. It seems crazy to buy multiple licenses for 1 computer, or pay more for a team license.

  This can help:

  FAQ: Where can I find the terms of membership and the terms of use?

  The State of software:

  You can activate the software on up to 2 devices (physical or virtual) at the same time, if these activations are associated with The same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

• having the iPad several years; I forgot the password. Tried to restore; Unable to get the new software on my Macbook to charge; always disabled iPad

  have older Ipads; I forgot the password; now disabled. Tried restore several times. My Macbook won't download new software. Several error messages.  iPad now could not be restored and open

  Hey domerdrnd74,

  Is not not be able to access you iPad because it is disabled does not for a good hour.

  If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled through the steps you need to do to get the iPad upward and running. I did these steps a few times before and they work every time. You may need to put your device in recovery mode, more than once if your internet speed is slower by downloading the restore software.

  See you soon

• I am deploying Firefox ESR and need to know if plugins read the registry can be activated by the force on all computers.

  I'm deploying Firefox ESR 31.X to all the computers in my company. We have plugins for security that I need to have forcibly running on each computer so that users cannot turn it off. The main example is McAfee SiteAdvisor. Firefox detects the plugin based on the HKLM\Software\MozillaPlugins registry key. The plugin provides a path to the location of the DLL in the McAfee program folder. Is it possible that I can put this plugin to always be activated?

  You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).

  Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/
  • http://Mike.kaply.com/2014/01/08/can-Firefox-do-this/

  You must set the pref (s) of plugin.state related to 2 always activate a plugin.

  • lockPref ("plugin.state.npmcffplg", 2);
  • plugin. State (0: never activate; 1: ask to activate; 2: always activate)