Activation of the Service supply by role

Similar Questions

• Windows 7 Home Premium x 64: activation of the service Windows Update crashes my computer after upgrade RAM

  A few days ago I had two sticks of 2 GB GSkill RAM by mail. Here's the same brand, model and size as the pair currently installed (obviously). (Sticks alternate according to the specifications of the card from my mother)

  After you have installed the new RAM and the computer starts up, it freezes within about 30 seconds of connection. Before installing the new sticks, I had no problem whatsoever.

  My first thought is that I sit the RAM properly, then I go and reinstall it. I start, and the same thing happens.

  So obviously this RAM must be bad, right? When I take out news, not gel. Ah, but when I remove the OLD stuff and use new instead, I ALSO no gel. So maybe it is not the RAM.

  Then I reboot in safe mode. No gel. Interesting. I opened the window 'System' and it says "memory (RAM) installed: 4.00 GB ', which is correct." I opened CPU - Z, and it reports also 4 GB of memory. I run a few hours and have no problems whatsoever. So I say to myself, there must be either a Windows service or a 3rd party service is causing the issue and not the new RAM.

  I disable all services of 3rd parties and restart in normal mode. It freezes. OK, so maybe (though unlikely) I have a virus any (I say probably not because I have to) run the module additional firefox NoScript, and set to block all flash, javascript, xss, iframes, etc. - in other words, only allow to my whitelist and B) I have Windows Firewall and running McAffee and updated.). But I decided to first try Windows services for the hell of it.

  So I enable only the services that start in safe mode as my reference, disabling the rest via services.msc. I start normally and not gel. Great, then maybe it is a Windows service. I start which allows one service after another without any problem. I get to the bottom of the list and select the Windows Update service. Within literally 10 seconds my computer crashes. Large.

  As a validation test, I put all services back to the base line of safe mode and only allow Windows Update. I start normally, and again once it freezes.

  Another test of validation, I start with all normal, but disable Windows Update. Do not freeze. I'm going to start Windows Update. Yet once, it freezes for about 10 seconds. So clearly something is in place.

  As a third and final sanity check, I remove the new RAM and run a Windows Update. He finds a few optional updates, but not critical. My system is up2date.

  My only attempt to solve this problem so far was to backup all Windows Update DLLs (C:\windows\system32\wu*.dll, although I don't know if these are good) and do a scan sfc to replace them with copies of 'good '. It did not work.

  So my question is:

  Why cares Windows Update that I have 4 GB of memory installed?

  Thank you

  Jon

  1. I 'upgraded' from the RC of Windows 7 x 64 for Win 7 x 64 Home Premium.

  2. I use McAfee VirusScan Enterprise 8.7.0i, DAT version 6060, Scan Engine 5400.1158

  3 No.

  4. No, I put together this computer myself.

  ______________________

  To answer my previous posts:

  I think the USB storage is a separate issue. And.

  I think I * may * have solved the problem of origin with one or more of the following (don't know who):

  • Updated the software of the chipset of the card from my mother.
  • Updated HD Windows audio drivers to the recommended ASUS (Realtek) HD audio drivers
  • Updated since Windows installed NVIDIA display drivers for version NVIDIA WHQL.
  • Increased my tRFC (refresh time of line) to 70 52 clocks clocks. Set my GSKILL DRAM voltage recommended by 2.1V. Off the SPD DRAM configuration (I read that ASUS is not entirely based on the SPD and can affect things on its own).

  I had WU for 20 minutes from writing this post without a freeze, so we'll see. (Previously, it would freeze within 10 seconds of turning on WU)

• With all the services activation problems. Error 0xC004E003.

  Original title: activation with the service package problems

  OK here is my problem I have Windows Vista Home Basic, was if she had for a long time now on my computer then windows out of the Blues jumped to the top with it needs to install a service package, now, I got XP on another computer, I know that there are a set of services on your computer, so I went to install the package of Service 1.  The package installed properly (took all night) and when I connect it tells me that there is an error.  description 0xC004E003 The Software Licensing Service reported that license evaluation failed.  That means that I'm going to the Windows update it verified whenever I went there, I downloaded all some updates on the Microsoft site and was the one to get these downloads is to get your computer checked and mine happened all the time, but now this service package that makes me not being able to get on my computer , I got this computer as 3 years I think that I bought at wal-mart somewhere don't remember, I got the installation disc, but I don't want to restore my computer there's stuff on my computer I can NEVER get back if I do it and I can not help me please my email is Email removed for privacy and I can't put my product key the internet, you know what I mean everyone there LOL :)  The product key is on the bottom of my laptop.

  Uninstall Service Pack 1 and install Service Pack 2.

  After you uninstall Service Pack 1 choose a Restore Point dated before when you installed SP1 and use that restore point.

  Then install SP2 by uploading it on a folder: http://technet.microsoft.com/en-us/windows/dd262148.aspx

  And then double-click the .exe file to install SP2.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Automatic Updates service will not "enabled" on the use of the "services.msc" in "Start menu" 'run '.

  I had or still have a virus on my computer.  Every anti-virus program I attemtped to use now informed I have NO viruses, etc..  But I still have a problem with the activation of the Service automatic updates is enabled. Within 10 seconds, the service returns to "disabled".  Yes, I have the active BITS and YES, I have activated the event log.

  Please help this has become quite a nuisance!

  You have a Setup for this computer disk. Sometimes when you get something second hand / for you etc., it is best to wipe and start over.

  To replace important files would require an installation diskettes. Reinstall, SFC, repair installation etc.

  Back up your important documents.

  TaurArian [MVP] 2005-2010 - Update Services

• BlackBerry Smartphones internet does not not on the service provider

  Hello

  I use an unlocked version 9900 bold bb in India with airtel provider

  It connects well with wi fi my local service provider at home

  but not able to access internet using the data plan activated via the service provider

  error

  navigation via the cellular network is not VAT included in your current service plan. To browse the web, you use WiFi or contact your service provider to change your service plan

  I have not activated black Berry service plan

  I checked the data are enabled

  and sent a request to allow the application to effect routing table

  I activated with my map data provider

  thanking you

  Hello and welcome to the community!

  Please resolve the conflict in these two statements of yours...

  sam7702000 wrote:

  I have not activated black Berry service plan

  I activated with my map data provider

  With BB, YOU normally have a data plan at the level of the BB to your provider. In any case only your operator can tell you what services you should and not wait to work based on the level of data plan you have of them.

  Good luck!

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• EventID: 1206 Event Source: Active Directory Web Services ADWS failed to determine whether the computer is a global catalog server. What will be the solution for this.

  EventID: 1206 Event Source: Active Directory Web Services ADWS failed to determine whether the computer is a global catalog server. What will be the solution for this.

  Hi K jtm,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• When you are looking for a printer I get error: "The Active Directory Domain Services is currently unavailable."

  Original title: domain Active Directory unavailable Services

  I have an HP laptop, works with Vista Business SP2, all MS etc updates Now, I get a message "Active Directory Domain Services" unavailable when I try and find the printer and cannot print to any printer, USB or a netwrok, I used to be able to. Dead in the water. I tried the trick of Notepad listed in this forum, "Run as administrator", disable the firewall, malware, antivirus, uninstall the drivers, updates re-installed, downloaded, everything. HELP PLEASE!

  Hello
   
  Thank you for the update.
  Question: There may be conflict between printers.
   
  Try the methods that you have not tried earlier and check after each method:
  Method 1:
  Solve printer problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
   
  Method 2:
  Step 1: uninstall the printer driver and reinstall the driver:
  Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-US/windows7/Find-and-install-printer-drivers
   
  Step 2: Define any default printer and check:
  Change your default printer: http://windows.microsoft.com/en-US/windows-vista/Change-your-default-printer
   
  Method 3: problems printing from the Internet: http://h10025.www1.HP.com/ewfrf/wc/document?DocName=buu01105&cc=us&LC=en&DLC=en#N453
   
  Reference link:
  Impossible to print or view, preview printing a Web page in Internet Explorer:
  http://support.Microsoft.com/kb/973479
   
  It will be useful.

• My printer Dell all-in-one said that the Active Directory domain Service is unavailable?

  When I try to print the printer tells me there is no communication and that the Active Directory domain Service is not available

  Hi, Jinagroh,

  See if this helps:

  Domain Services Active directory unavailable? Unable to print in Word 2010 Starter

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Active-Directory-domain-services-unavailable-cant/8691ba4f-2657-4387-b1c0-67dcdd99eb7f

  Try to access the print administrator servers. To troubleshoot the device, try the following steps.

  1. click on start, click on devices and printers.
  2. right click on the item of the printer and click on solve.

• Active Directory Domain Services is currently unavailable ___I am Windows 7 Home premium; and I'm the User.___How do to ensure that the available ADDS? ___

  After about 3 weeks working with Dell Inspiron 14 R and print with HP laserjet 1020, without problem, now I have a problem: when I try to "find the printer (in MS Word, MS PowerPoint, MS Excel for example) I get the message: Active Directory Domain Services is currently unavailable.

  I am running Windows 7 Home premium; and I'm the user.

  I try to remove and reinstall hp laser jet 1020 once again, but the problem still exist.

  After I opened the menu devices and printers, and then click the Hp Laser Jet 1020, the category of this printer icon: 'unknown '.

  How can I make the available ADDS?

  Try this weird cure:

  Just open Notepad, go get a printer and add the printer from here.

  I can now print all programs.

  He worked for others; like I said, weird!

• Windows Firewall: get the message that the firewall cannot be activated because a "service is not associated with running.

  In the last days is message that my computer is not protected by a firewall. I followed the recommendations to enable the windows firewall (both through the alert procedure and the control panel); but get message that the firewall cannot be activated because a "service is not associated with running.

  I'm usually protected by the free AVG service and its protection of identity theft.

  How can I recover the windows firewall?

  How to turn on the windows firewall?

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security, and then clickingWindows firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended), and then click OK.

  If you want the firewall to block everything, including the programs selected on theExceptions tab, select theBlock all the incoming connections checkbox.

  WARNING: More than a firewall running at the same time program could lead to conflict. It is best to use a firewall program.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Applications blackBerry Smartphones without the services of BB activation

  Hello.. I opted for an internet access plan frm my ISP (vodafone). However, I hvnt activated yet no BBservices on my BBtorch... I can't use any app on my phone without the activation of these services like push e-mail, social RSS, RSS etc... ???

  is there an audio dictionary for BB Phone?

  Without BB service there is very little that you can do on the phone outside phone and text.

  According to me, there are a few apps that you can install as Facebook for twitter and Browsert of the opera for a web browser that would work, but for the full experience, you need to add the blackberry data plan.

  In the United Kingdom at least BB onto the bolt on the same cost to a bolt of normal data in most cases.

• 80070422 ERROR_SERVICE_DISABLED. The service cannot be started, either because it is disabled or because__it has no active device is associated to him.

  Just bought a HP Pro Book 6440 with Windows 7 installed.

  Problem with windows Defender.  Cannot be enabled after a pop up.

  Code: The service cannot be started, either because it is disabled
  There is no active device is associated to him.

  Windows security systems cannot be turned on.

  Also get Automated request

  Message on google: your query looks like automated queries of a spyware application.
   
  blocked warning Spyware navigation

  We recommend that you scan your computer against viruses and spyware immediately and remove any suspicious software found.

  I use Kapersky 2011.  No problem scanning every day.  Programs spyware downdload no change.

  Now after a week impossible to surf the internet or google whatever it is or view facebook pages.

  Tried many things.  Help, please.

  Hello

  Perform the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:

  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center:

  http://Windows.Microsoft.com/en-us/Windows7/understanding-security-and-safe-computing

  Perform the following steps and update the computer:

  (a) click Start, type Notepad in the start search box, and then click Notepad in the list programs.

  (b) copy the following text, and then paste the text into Notepad:

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  (c) click file, click Save as, and then type Repair.bat.

  (d) in the file type box, click all files (*. *).

  (e) in the area save in, click Desktop, and then click Save.

  (f) on the file menu, click on exit.

  (g) the right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  (h) try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove, then click Yes.

  Try to start Windows Defender after these steps.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the Active Server is shut down normally, the passive server does not start the service

  Hi friends,

  I have a question for the vCenter heartbeat,

  When the Active Server is shut down normally, the passive server does not start the service.

  Is this normal?

  Thank you.

  He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".

  Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)

  Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat

  See you soon!

• Cannot find the active file analysis Service

  I just bought and installed Photoshop elements 13 on my OS Windows 8.1. I had version 9 on my old computer and never had any problems with it.

  
  I want to set the folder that got to watch in Photoshop elements 13. But when I click on the option in the 'File' menu, I get a message saying that I need to start the service "Adobe Active File Monitor". Problem is that this service is not to be installed. It is not listed in my services. How can I fix it? Is there another installation that I need to run side for this service is installed?

  Let me know

  
  Thank you

  PS: I know how to monitor, start, stop, configure services. It is simply not listed, so probably not installed.

  OK forget about it. I tried the chat with a technician who did not know what to say. He referred me to a senior engineer that suggests simply uninstall and reinstall the software which has indeed fixed the problem.

  So the solution: uninstall and reinstall.