Automatic Updates service will not "enabled" on the use of the "services.msc" in "Start menu" 'run '.

Similar Questions

• Automatic updates - kb265370 will not be installed because windows encounter an unknown error: 64 c

  Automatic updates - kb265370 will not be installed because windows encounter an unknown error: 64 c

  Have tried several times to install but keeps failing.

  I used a cup-Kiss/fix registry Ccleaner and Norton 360 as well as sort my .net framework client profile 4 back to the original configuration (which sorted prior regarding a contemporary update update problem) and have run two microsoft ' difficulty his '-501223.exe and the other with a long name!

  any help would be appreciated

  Fixed - Sorry for not knowing how to mark the wire/q etc.

  for fellow sufferers, I had to repair/patch/reinstal my .net 1 to 4.

  not really fast, but it worked

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• How to install automatic updates, which will not be installed

  I always get the yellow ball update and when I click on the icon to install the updates, he said still - automatic update could not be installed and I don't understan why, my firewall is disabled and it will not always up to date!

  There are several reasons why updates may fail, we would need to know a bit more information, start here:

  How to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602

  See also:

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798/

• Bad patch after automatic update: Windows will not start

  I am running a 32 bit Windows Vista and my automatic updates recently installed "major updates", but there must be one which is mess up my computer. Fortunately, I was able to do a restore of the system on my computer right before when the updates are installed, my computer is working again and the error code that was spotted in the restoration of the system was that there was a bad patch. Updates were: KB2288613 (a security update for microsoft office 2003), KB2347290, KB975558 KB981322 KB2141007 (all updates for windows vista security) and KB905866 (update for windows mail junk e-mail filter).

  I was wondering if anyone else has had a problem with these or any other patches automatically downloaded? I restored my computer so that it will continue to work for me, but I can't keep ignoring important updates for my computer. Any suggestions on how to solve this problem and to keep my computer don't step back after an update? Would be trying to download one at a time (then by restarting after each download) in order to remove the update is causing the problem to the best idea at this stage? Maybe that way I can just ignore than AN update...

  Hi LinaMarieWSU,

  1. what happens after I installed updates?

  2. do you have security software installed on the computer?

  I suggest that you disable the security software installed on the computer and then install the updates, one after the other and check.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove the automatic update that will not be updated... KB2596672?

  All except 1 update has been installed. How can I get rid of the icon of safety?

  Hi Erika,

  If you choose to hide KB2596672, follow these steps:

  1. Click Start
  2. Select Control Panel
  3. Select Windows Update
  4. Select check updates
  5. Right-click on the update (KB2596672)
  6. Select hide update

  If you want to solve this problem and try to install the update, you can try the following troubleshooting steps:

  Option 1:

  Download the update from here and follow the instructions to install the update manually.

  Option 2:

  1. You restart the computer and immediately press the F8 key.
  2. Select safe mode with networking from the options in the menu
  3. Repeat steps 1 through 4 in the above list
  4. Install the update

  If you are unable to install the update, please provide the complete error message you receive.

• Update KB2690729 will not settle - error: "the source of the network is missing" and says that Silverlight.msi is unavalible.

  The source network c:\b9fda9d8bdfc317fa4e2\ that I can't uninstall because it lacks this same file is missing.

  He also says that Silverlight.msi is unavalible.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to clean a facility damaged Silverlight and then reinstall Silverlight
  http://support.Microsoft.com/kb/2608523

  See also:

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  If the above does not help, I suggest you to ask your question at the following link.
  http://forums.Silverlight.NET/

• After the Macbook to Yosemite 10.11.15 update, it will not stop

  I have therefore updated the latest version of Mac OS x at 10.11.15. During installation, all work fine including the reboot and restart the macbook. But when I tried to stop my Macbook, it will not stop. The macbook has not frozen, but the tab is disappear after click on stop. Now, I have the macbook shutdown by pressing the power button / stop. Is there a solution?

  Software for Tablet Wacom has been proven to show this behavior. Uninstall or try to remove your connection point

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  I would say "try and do a restore as new iPhone" like everyone else but I'm having a similar problem and nothing works! I've restored all the possible ways and nothing. I got my screen replaced and I still have the same home button but my phone updated with error 53 (makes the phone unusable) but the camera did work before the update. and Apple has released iOS 9.1.2 (13D 20) to correct the error 53 (mainly for other reasons) but when I go to use the camera, it is only black! If someone could help 'discovered' and I would be great!

• I keep trying to run 2 updates that will not update. I get the error 646 with them. they are related to the KB976884 and KB976416. they are for Outlook and the pathfinder 2007. I'm not sure but I think they are for microsoft office 2007.

  Sorry if I'm repeating myself, but just trying to meet what is needed.  The only thing I have changed or done on my computer is run the defragmentation and tried to update each update separately but I am unable to get the updates for the update for Microsoft Office InfoPath 2007 (KB976416)

  Download size: 2.1 MB

  This update provides the latest fixes to Microsoft Office InfoPath 2007. Additionally, this update contains stability and performance improvements.

  More information:
  http://support.Microsoft.com/kb/976416

  and I am unable to get this update also: update for the junk e-mail in Microsoft Office Outlook 2007 (KB976884) filter

  Download size: 3.2 MB

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I updated adobe and now windows vista will not come to the top!

  I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all.  I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.

  Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X.  Then try to restart normally.

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

  I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

   

  Hello

  ·         What is the update message that you receive?

  ·         Do you have an error message when you try to read the Blu - ray Disc?

  ·         This problem occurs only with Blu ray discs or any of the others?

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

• I'm having some trouble with the installation process. I want to install a trial version of AI, but my adobe application manager keeps inviting them to update but will not go beyond 10%. I tried uninstalling and reinstalling but the problem persists. Help

  I don't know what to do. I'm trying to download a trial version of A.I., but when downloading, my adobe application manager keeps trying to update but will not exceed 10%. I can't access anything on my manager. I tried to re download the program, but the same problem persists. What are my options?

  If you just open the Application Manager, it successfully updated?

  In Illustrator, you can download setup offline http://prodesigntools.com/adobe-cc-2014-direct-download-links.html (CC 2014).

  Make sure you follow the instructions very important on this page.