Activation of the States of reversal for multiple items

Similar Questions

• Can not get the States of relaxation for work in the widget of blank publication of Muse

  Hello

  I don't know what I'm doing wrong, but I cannot get States to trigger (thumbnail) to work in the blank publication. That's what I do:

  I click on one of the triggers (thumbnails), open the States Panel, select the Normal State and fill the tile bearing the image of the . Then I select the rollover State and reduce the opacity to 50% or make any other changes to this State. I see [in the States Panel, in design mode] now in the States Panel which show both normal and Active image with an opacity of 100% and turnover and the mouse down show with an opacity of 50%. BUT when I preview the page in the browser, move the pointer of the mouse on the trigger does not change state of the thumbnail. It does not raise the change of the target, but the thumbnail itself doesn't change States. The idea is that when I mouse over the thumbnail, an image appears in the target box. But I also want the thumbnail to change status while in the rollover State. I have attached a screenshot of the Options Panel in case it helps.

  Any help with this will be greatly appreciated!

  Tania

  

  Depending on your options settings of Composition, changing the active State to the same settings as your rollover State. When you hover over the trigger will change and show the target.

• How to find the first max value for each item

  Hello
  
  I have the me_result of the table as below,
  
  SELECT * FROM me_result;
  
  ID     ||| ELITE     ||||||||||| FREQ_ITEM | COMBINED_STR | SUP
  1     ||; 1; 10; 2; 3; 4; 5; 7; 8. 1     ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
  2     ||; 1; 10; 2; 3; 4; 5; 7; 8. 2     ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
  3     ||; 1; 10; 2; 3; 4; 5; 7; 8. 3     ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
  4     ||; 1; 10; 2; 3; 4; 5; 7; 8. 4     ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
  5     ||; 1; 10; 2; 3; 4; 5; 7; 8. 5     ||||||||||||||; 1; 10; 2; 3; 4; 5; 7; 8 ||| 2
  6     ||; 10; 2; 3; 4; 5; 8; 9. 1     ||||||||||||||; 10; 2; 3; 4; 5; 8; 9; 1 ||| 1
  7     ||; 10; 2; 3; 4; 5; 8; 9. 2     ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
  8     ||; 10; 2; 3; 4; 5; 8; 9. 3     ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
  9     ||; 10; 2; 3; 4; 5; 8; 9. 4     ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
  10     ||; 10; 2; 3; 4; 5; 8; 9. 5     ||||||||||||||; 10; 2; 3; 4; 5; 8; 9 ||| 2
  
  
  I need to find the first COMBINED_STR max for each element of the ELITE,
  I mean, max value is the max REGEXP_COUNT (combined_str,' ;')))
  
  really, I try to write down, but I had a lot of values for each ELITE and I need only the first, that
  SELECT * from me_result
  WHERE (ELITE, REGEXP_COUNT (combined_str,' ;')))) IN
  (SELECT ELITE, MAX (REGEXP_COUNT (combined_str,' ;'))))) ME_RESULT ELITE GROUP);
  
  I need the result to be as below.
  
  1; 1; 10; 2; 3; 4; 5; 7; 8-1; 1; 10; 2; 3; 4; 5; 7; : p
  6; 10; 2; 3; 4; 5; 8; 9 1; 10; 2; 3; 4; 5; 8; 9; 1 1
  
  any help please,.
  
  Published by: user11309581 on July 10, 2011 22:03

  Can be

  with t as
  (select 1     ID, ';1;10;2;3;4;5;7;8'     ELITE, 1     FREQ_ITEM, ';1;10;2;3;4;5;7;8' COMBINED_STR, 2 SUP from dual union all
  select 2     ,';1;10;2;3;4;5;7;8'     ,2     ,';1;10;2;3;4;5;7;8'     ,2 from dual union all
  select 3     ,';1;10;2;3;4;5;7;8'     ,3     ,';1;10;2;3;4;5;7;8'     ,2 from dual union all
  select 4     ,';1;10;2;3;4;5;7;8'     ,4     ,';1;10;2;3;4;5;7;8'     ,2 from dual union all
  select 5     ,';1;10;2;3;4;5;7;8'     ,5     ,';1;10;2;3;4;5;7;8'     ,2 from dual union all
  select 6     ,';10;2;3;4;5;8;9'     ,1     ,';10;2;3;4;5;8;9;1'     ,1 from dual union all
  select 7     ,';10;2;3;4;5;8;9'     ,2     ,';10;2;3;4;5;8;9'     ,2 from dual union all
  select 8     ,';10;2;3;4;5;8;9'     ,3     ,';10;2;3;4;5;8;9'     ,2 from dual union all
  select 9     ,';10;2;3;4;5;8;9'      ,4     ,';10;2;3;4;5;8;9'     ,2 from dual union all
  select 10     ,';10;2;3;4;5;8;9'     ,5     ,';10;2;3;4;5;8;9'     ,2 from dual
  )
  select ID,ELITE,FREQ_ITEM,COMBINED_STR,SUP
  from (
    SELECT ID,ELITE,FREQ_ITEM,COMBINED_STR,SUP, ROW_NUMBER() over (PARTITION BY ELITE order by id) RN
    FROM t
    WHERE (ELITE,REGEXP_COUNT(combined_str,';')) IN
      (SELECT ELITE,MAX(REGEXP_COUNT(combined_str,';')) FROM t GROUP BY ELITE)
  ) where RN=1
  order by id
  
  ID                     ELITE             FREQ_ITEM              COMBINED_STR      SUP
  ---------------------- ----------------- ---------------------- ----------------- ----------------------
  1                      ;1;10;2;3;4;5;7;8 1                      ;1;10;2;3;4;5;7;8 2
  6                      ;10;2;3;4;5;8;9   1                      ;10;2;3;4;5;8;9;1 1     
  

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• Change the saturation, contrast, Equalizer for multiple clips

  Hello

  I've already cut my project.

  Now, all that's left to do is to correct the saturation, contrast + audio equalizer.

  I can't believe the only way to achieve this is by the clip.

  Thank you very much.

  YYou can do multiple clips at once, or you can make one and copy and paste other attributes. It depends on the program, but usually video is rated in sequence by sequence, unless the shot is repeated.

• read the value of the cell in Excel for multiple files

  I'm writing a routine of LabView to read a value from a specific cell in an EXCEL spreadsheet file. I would like to draw the value then spend the following in the file EXCEL file.  In one of the forums I found this LabView VI that works to read a cell value in a single EXCEL file called Read_Value_From_Excel.JPG

  I tried to modify the program by adding a function for loop and list of the folder as shown in Read_Value_From_Excel_LM2. JPG.  This file gives me an error saying 'Incorrect function in Read_Value_From Excel_LM2'.

  I'd appreciate any help that I've been faced with this during a few days and have not been able to find a similar question in other forums. Thank you.

  
  

• "Straighten the lines' grayed out for multiple lines MLD

  SDDM v4.1.0.866

  The selection of several relationship lines in a diagram of LDM created with an earlier version (4.0.2.840 and perhaps earlier too well but I have not tried), straighten lines is now grayed out and not available. It is activated when I select a relationship line. It happens that LDM non-relational diagrams (i.e. in diagram relational, I can select several lines of FK constraint and straighten the lines can be used).

  This behavior is also now seen with v4.0.2.840 (when I load a design created with this same version), where it is used to straighten the lines on several front lines. I certainly would have noticed this if present behaviour earlier, since it is such a waste of time. I think that it has appeared since the installation of 4.1.0.866.

  On a new design created with 4.0.2.840 or 4.1.0.866, the usual behavior of allowing to straighten the lines on several lines is fine. The problem appears only when loading existing diagrams of LDM.

  Any suggestion would be appreciated,

  Patrick

  Also, I was able to reproduce and logged a bug.

  You have found the good workaround.

  Philippe

• How to use the find method to search for multiple items in a single paragraph?

  I'm desigining a script to find all instances where ctrl + b and ctrl + i are applied to body text and then replace the format of these characters replaced with chartag italic or bold.  Here's what the script is supposed to do:

  1. put the find method in a while loop that overrides seeks format character.
  2. If a substitution of format character is found, pass the text range returned by the find method and the CharPropsChange flag in the GetTextForRange method.
  3. Use a Boolean comparison between the idata of the text element to the angle of character and character constant weight.
  4. What that is the boolean is set to true, and then use the SetTextProp method to set the properties of the text range for the italic or bold character tag properties.

  This script works on the substitution of format first character found however it ignores other substitutions in the same paragraph. The cause of this is that the while loop updated the line of text control used by the find method for the following paragraph in the stream. I think I need to add an inner loop that runs through all the text in a single paragraph, where teaching iteration the loc text used by the find method is based on the same paragraph, but the offset is changed. I don't know how to do this.

  function removeOverrides (RPSC)

  {

  var vDocStart = pDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  var vBoldFmt = getCharFmt (RPSC, "Bold")

  var vItalicFmt = getCharFmt (RPSC, 'Italic')

  initFA_errno ();

  While (FA_errno is constant .FE_Success)

  {

  var vTextLoc = new TextLoc(vDocStart,0);

  var vFindParams = findOverrideParams (CDRP);

  var vTextRange = pDoc.Find (vTextLoc, vFindParams);

  If (vTextRange.beg.obj.ObjectValid ())

  {

  var vTextItems = pDoc.GetTextForRange (vTextRange, Constants.FTI_CharPropsChange)

  If (vTextItems.length ==! 0)

  {

  If (vTextItems [0] .idata == constant .FTF_WEIGHT)

  {

  pDoc.SetTextProps (vTextRange, vBoldFmt.GetProps ())

  }

  If (vTextItems [0] .idata == constant .FTF_ANGLE)

  {

  pDoc.SetTextProps (vTextRange, vItalicFmt.GetProps ())

  }

  } else (Log (vLogFileName, ' \nERROR: none of the items were found in the table in text format but alternative size were found: ' + pDoc.Name))

  }

  vDocStart = vDocStart.NextPgfInFlow;

  }

  }

  function findOverrideParams (RPSC)

  {

  var vFindParams = AllocatePropVals (1);

  vFindParams [0].propIdent.num = Constants.FS_FindObject;

  vFindParams [0].propVal.valType = Constants.FT_Integer;

  vFindParams [0].propVal.ival = Constants.FV_FindCharacterFormatOverride;

  Return vFindParams;

  }

  Another approach (which is what I usually did) is after the first search to set vTextLoc = vTextRange.end

  Whatever it is, you might consider moving your initialization of vTextLoc and vFindParams outside the while loop. The settings do not change, why redefine them for each search?

• Broadcast the ssid on WLC for multiple ssid

  Hello

  I'm looking to broadcast the ssid as 13 on the controller, but another 2 not broadcasting. can we do this? It will be totally 15 SSID, provision of services to clients over several suppliers.

  Thanks in advance

  Hello

  By default, the Cisco access point supports 16 SSID... If you want 15 SSID in werving network customers then its possible at the level of the problems... If the SSID is not broadcast, check if customers correctly enter the credentials and create a manual profile on the laptop or something... it will work.

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• How to configure the keyboard shortcuts App for submenu items?

  Hi-

  I'm trying to define keyboard shortcuts for Pro Tools. I am facing a problem, however. I want to put a shortcut for the menu item

  View-> view-> Inserts A-E Edit window

  in the keyboard preferences window, so I've created a shortcut to the App to «inserts A - E» The problem is that there are other elements of submenu in Pro Tools with the same name, for example

  View-> Mix window views-> Inserts A-E

  Track-> Bypass inserts-> Inserts A - E

  and it is the latter who eventually be triggered by the shortcut. In fact the shortcut appears in the three places during the navigation in the menus; but it only triggers the item "bypass".

  In the keyboard preferences pane, is it possible to specify which menu a submenu item resides in?

  I'm on El Capitan 10.11.2, ProTools 11.3.1.

  Thanks in advance

  ~ peter in istanbul

  It is not possible that you are trying. Shortcuts can handle only a single menu command name. The command being the last point. Other menus of the parent are not considered.

• Text of the rules of formatting for brothers items

  How you would change the rules of text format an element ESD repeated several times after the optional element a brother? For example, you have the following, her children and their formats:

  1. This TASK (by title)
  A. SUBJECT (w / title)
  (1) subtask (w / title)
  (2) subtask (w / title)
  (3) subtask (w / title)

  Now, if the chondrites title of the TOPIC is not used, I need subtasks them appear as follows:

  1. This TASK (by title)

  SUBJECT (untitled) (still present SUBJECT element)
  A. subtask (w / title)
  B. subtask (w / title)
  C. subtask (w / title)

  How do you write that in ESD? Element that could change? The subtask? Alternatively, the title?

  I have tried several combinations in text format rules and paragraphs using specifications context different like {notfirst}, {after title}, {first}, etc, but I can't seem to make it work. Anyone who is familiar with the ATA iSPEC 2200 will recognize the formatting.

  Wes

  Hi Wes,

  That is right. This problem that can be confusing is only identified in the CMM DTD, but the problem is exactly the same for the AMM and a few other doctypes. If you look at the description of the CMM task item in the document of the iSpec, you will find examples of the five ways the subelements can be used. There are a also the following tips "to avoid the mixing of different ways this TASK and TOPIC can be manipulated. It is recommended to choose a path and stick with it.  This is very good advice in my opinion.

  The specification shows five ways that TASK and the SUBJECT can be used, but I found a total of 13 possible constructions for the MMT! My development work for a FrameMaker ATAiSpec2200 application was for a commercial application, so we built in an interface which allowed a unique style to be selected and used in the manual.

  Ian

• Photoshop button in the State of the asset returns to normal after turning over?

  Hello

  I work on a site of reference glossary in Muse and have hit a roadblock with my buttons in photoshop.

  I created the menu buttons in Photoshop that have two different States - an asset and working capital and another for normal and down (the button is actually saved with four layers/States, one for each, but for what the user sees, it's really only two options). I used these menu buttons as triggers of reversal for blank publications, and when the user hovers over the button, the page name will appear below and then disappears in slowing (otherwise the names ecaple and it would look very crowded).

  The issue I found is that when I preview the page in my browser, the buttons seem to work properly as they appear in the active state, which indicates that the page they are linked is one they are on.

  Initial view - homepage:

  

  .. .and when I reversal of the image of the page that I am currently on, the button displays the name of the desired page, like so:

  

  However, when I have the deployment, the button goes back back to the normal/down state, even if I'm still on the home page.

  

  Here is a screenshot of the composition settings that I set up for this widget. I tried the target 'hide' switching to zero, but as the target refers to the word 'Home', the word 'Home' has remained visible and more button remains in the active state, which is not what I want. I also tried selecting "triggers on Top", but the problem was solved not here either.

  

  What Miss me? How can I make sure that my button remains in the active state when it is on it is linked to the page?

  Thanks for your help!

  Rachel

  Looks like a bug that is the impact of the meaning overloaded state 'active '. 'Active' is the State used for an article with an applied hyperlink that points to the current page (or an anchor point in the current scrolling range on the current page) and the State used for a trigger or a sticker in a widget of Composition or a slide show that matches one element current assets of the composition or the slide show.

  It seems that we honor the hyperlink definition of 'Assets' on the loading of the page for a composition trigger with a hyperlink to the applied current page, but not to honor this definition of active when the transition to having no element in the composition active (or when presumable to transition to another element of the composition is active).

  The only solution that comes to mind would be the approach very tedious to reproduce this widget of composition on each page, delete the hyperlink on the 'active' trigger and put shaped manually its 'Normal' State for Quicken.

  I wrote the bug. However, it cannot be corrected immediately. (We tend to collect small bugs in a box and then answer all at once or when other changes are planned in this area, because of the overhead involved in the ramp up to work on a surface and completely redone the test after changes).

• Adobe Muse doesn't let me change the States of thumbnails in a lightbox.

  Muse doesn't let me change the States of thumbnails for my lightbox. The only thing that it is allowing me to do the right now is to change the opacity of each State. I would like to than the 'normal' State of my nail of the thumb to be a solid color, the "Rollover" State to reveal the image that is displayed in the Viewer, the State of "mouse down" to be another solid color and the 'active' State of being of the same color together as a 'normal' State I changed the color, and I even tried to fill it with a real image with a solid color file. Nothing will work - the State remains just to display the main images in the thumbnails. I would appreciate help! I don't understand why it won't work. States work for everything else.

  Hello

  With startup, if you add a picture as a thumbnail then it could appear as hero image.

  We cannot install according to States with the thumbnails of the images, any image or fill added to the would be added as a background image. You can change the image of the active panel, but still we can not install different images with the States.

  Better idea would be to use the composition where you can set up reports for the triggers and the images separate targets.

  Thank you

  Sanjit

• A Wi - Fi and 3G connection active at the same time?

  Maybe this is a stupid question.  I noticed at work today, my WiFi and 3G are both active at the same time.  For all I know, the WiFi is working and not a false indication as I sometimes get at home.  In addition, my 3G indicator shows and seems to be moving a lot of data.

  As I have already noticed, I usually have one or the other, unless he is changing course, or WiFi is falling out or something.

  Any ideas on that?

  Thanks for the help.

  Mark

  It's normal.  3G is not turned off when WiFi is on.  Properly connected WiFi will increase your 3G but not a substitute. -Mark

• desktop computers to linger in the folder 'inaccessible Agent' for a long time, apipa address might be a clue

  Hi all

  We run see 6.1.1 with linked clone Windows 7 desktops. Lately, some workstations hang in the State 'inaccessible Agent' for what seems like 15 or 20 minutes until they are refreshed. We have pools set on closing session and refreshment after 1 minute if disconnected. We noticed that desktop in this weird State have an apipa for the virtual NETWORK adapter address (starts with 169.254.x.x). If go us to the office as local administrator and do an ipconfig / renew, it will get a valid IP address on our network and as soon as it gets a valid IP address, he leaves the "Agent unreachable" queue and passes by the update process. It seems that Conversely, we can get these desktop computers to process more quickly is to remove them.

  This is not an isolated machine virtual on a particular ESXi host (I saw him arrive on all hosts) and when I look for ESXi hosts network settings, I see that the virtual machines in question are related to the virtual switch. I ensured that the virtual switch has enough ports (120) and I checked the DHCP servers, and there are a lot of IPs available in the subnet where live virtual offices.

  Also, it does not seem to be isolated to a pool, we see in a pool that uses the management of the Persona and a swimming pool which is not.

  Any thoughts on how to solve the problems?

  Thank you!

  Don't know it could help you, but we have IP private address automatically on our vdi error (it worked fine, but it broke after an update) we had to close 1 our DHCP servers (we had 2) since then, then all is back to normal. We will need to track DHCP to know exactly what is the cause of the problem none of our dhcp gave a clue at the time.