activation of Windows 7 after the new drive hard installet.

Similar Questions

• Install Windows 7 on the new drive hard but no disc

  My hard drive has failed recently and I replaced it myself. Now I am trying to install Windows 7 as operating system, but I do not have a disk. All I have is the product key. What should I do? Any help would be appreciated!

  If you do not have a Windows 7 installation disc, you can download an ISO. You will need the key code off the coast of the COA, not key code sticker that used the pre-installation.

  Windows 7 Ultimate SP1 - U ISO

  English x 64: X 17 - 59465.iso

  Windows 7 Professional SP1 - U ISO

  English x 64: X 17 - 59186.iso

  Windows 7 Home Premium SP1 - U ISO

  English x 64: X 17 - 58997.iso

  and then to create a bootable DVD with this...  http://www.ImgBurn.com/

  Note that:

  1. You will need to back up all your things before we continue...
  2. Use one of the above, it will take a new installation, and you will need to install Windows 7 drivers from the manufacturer of the computer after the basic installation is complete if you want the best from your equipment. A
  3. You have used more than any additional software that has been registered originally before the installation...

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

  I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory?  Its not partitioned to another eather drive

  original title: hard drive problems

  (1) what does your BIOS the drive size?

  ============================================================

  2) disk hard test - find your make and model:
  Speccy - computer/system information in detail
  (More detailed look at your memory and CPU)
  OS, CPU, RAM, card, graphics, hard drive, optical drive
  Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ================================================================

  (3) HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Wow for on 1 computer install 2 operating systems with 2 hd

  I have 2 hard drives; We have Windows XP and the new one is empty (empty) installed on a computer.  I would like to install Windows 7 on the new hard drive.  How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Thank you

  Hello

  Sound pretty simple you just need to start from the disc and choose the 2nd hard drive during the installation of windows 7
  your xp will remain such what. every time that you start the system it will ask you to choose which operating system you need
  Start with.
  thanx.

• Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a msg says: "Windows did not find antivirus software on this computer. What should I do?

  Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13.  Today a mesg says: "Windows did not find antivirus software on this computer.

  What should do?

  Download another copy of McAfee and activate it with your existing license.

  Ask for advice here: http://service.mcafee.com/Default.aspx

• Windows Vista install the new WD hard drive empty - does not not :(

  It was my original question: http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-Pavillion-a6645f-No-hard-drive-detected-BIOHD-2-err...

  And now...

  I got my CD of HP recovery and ordered a new WD 500 GB HDD... same features as the seagate who pooped me and I can't get windows install on the new HD

  No matter what I do, computer wants to open the Recovery Manager and according to the available procedure does not work.  It works me in circles asking for #1 drive, then the drive recovery supplement and back with no progress.

  What I have to do is use this form: http://vistahomepremium.windowsreinstall.com/installnewhdd/installnewhdd.htm but only the Recovery manager opens when I boot from the CD.

  Anyone have any ideas?

  If I followed your questions correctly... you had a BIOHD-2 error, ordered HP recovery discs, replaced the hard drive and tried to restore your system with no luck. Is that a correct assessment of the situation?

  OK, you need to make a Windows Vista install screen... not who's going to go with your HP recovery CD/DVD. The disks do not contain the Windows installation routine, only the HP Recovery Manager. These discs contain more or less, an image of the HP installed OS and software, plus some drivers and applications. To the best of my knowledge, you should have three DVDs (1 of 3, 2 of 3 and 3/3) more an additional drive. You should boot from CD 1 of 3... Then, when asked to insert the 2/3... Then, when asked to insert 3/3. And finally if/when necessary additional drive.

  At HP; Recover the system after the hard drive is replaced (Windows Vista)

  Frank

• Inspiron 13-5323 does not start after the new installed hard drive

  Fall of my Inspiron and Geek Squad said she needed a new hard drive.  I installed a new identical to the former myself blue WD.  When activated, it immediately passes to "Phoenix Securecore Tiano Setup.  Pre-launch tests indicate that the new hard drive works fine.  I tried to start in safe mode UEFI and in the boot Legacy mode, but no boot.  I get a message "Not found operating system".  It is my understanding that this computer has an operating system embedded on the motherboard.  I previously had it improved Windows 8.1 to 10.  When I tried to boot mode safe mode using F8, I had the same operating system not found message.  The F2 and F4 keys on commissioning do nothing different, either.  Am I missing a step in the window settings of Phoenix?  Suggestions while in Phoenix window bringing me could happen to start the system would be appreciated.

  In fact you have reloaded the operating system?  If not, the new drive is empty - it's why you see the message you see.

  You will need all the recovery media, as you did when you received the system - or, if you do not prepare a set, you will need to call Dell to buy a flash drive with the media today.  The alternative is to download Windows 10 TH2, of the same version (standard, pro) that has been installed and activated previously.  You can then reload the operating system.

• After the new installed hard drive, DVD player, not to recognize any media

  given that I had a new hard drive installed my dvd will not play any type of media, or play any DVD including those that I burned to a disc, since the new drive has been installed. I tried to download the drivers and utilities, I got with my comp. but like I said it will not read. I even tried to download dell canada drives, but still no help. also, my webcam does not work as well and again tried to download from disk but no luck.

  Hello

  ·         What happens when you insert the CD into the CD/DVD drive?

  ·         Do you have an error message when you try to play the CD?

  I suggest you try to fix this problem automatically by clicking on Fix It in the steps below:

  Step 1:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  Step 2:

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Step 3:
  Your CD or DVD drive cannot read or write media - Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If the issue still exists post returns with the information requested in questions.

• PSE 8 fails to run on the new drive hard iMac after Time Machine backup

  I had to have my iMac drive replaced the week last in the replacement of the Apple program. After installing the new drive, I restored the whole Machine on the new drive Time backup. Most things work perfectly, but I get an error message when I try to run PSE 8. The error is 150:30 of error indicating "license has stopped working". I tried a number of things to correct this as described in http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html, but found that most of the FlexNet referring to article data does not exist on my machine, so I am unable to complete the recommended steps (I did the hidden files visible). Also the Flexnet files do not appear on the backup volume. When I try to reload the software with the original disks I have just the player to make some noise and then eject it. All the other CD/DVD to work as usual. Very welcome ideas

  Download PSE 8 on trial download site and use your current serial number to activate it:

  http://prodesigntools.com/direct-download-links-for-Lightroom-3-and-Photoshop-elements-8.h tml

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

• Satellite L655-1GN - failed to install the new drive HARD original recovery image

  Hello

  Just had to buy a new hard drive and put the latter with the former. I already checked that he was the same size and SATA as the original hard drive. When I tried to start a new installation of the operating system from the recovery disk (that I bought the Toshiba provider in my country - MAFIL), the boot option was not available.

  MAFIL representative told me that the recovery disks only for the reinstalliation of the OS on the original drive, but are not suitable to install a fresh copy again. So, how can I install my Win7 64-bit, with all settings on the new drive and Toshiba apps?

  Thank you
  Tomer

  On many models of laptops different change HARD drive or upgrade can be done by the owner of the laptop and after doing this, you can install recovery image using the disc of recovery without any problem.

  I did several times on different models of Toshiba laptops. This works.
  I really don't understand how someone can give you this information.

  By default the BIOS settings, restart your machine and press F12 at startup. When the boot menu appears on the screen put the recovery disk ODD news, select CD/DVD as a boot device and press ENTER.
  What happens when you do this?

• Windows XP hangs after installing the new drive hard & software

  My 20 GB hard drive was almost full and the computer (Dell GX240) has been slow, I installed a new 160 GB drive. After loading Windows XP, Linksys, McAfee, MS Office and MS Windows updates would crash randomly. Restart the system would allow him to run for a few minutes and then hang again.
  I reformatted the drive and partitioned to 80 GB and then reloaded all programs above with the same results.
  I reformatted back to 20 GB, loaded XP and Linksys and the same problem occurred.
  It seems that the internet has something to do with the problem.
  Any suggestions?

  "Wingnut555" wrote in message News: 6aac2f2a-ffb6-4a22-98e1-67417709eb6b...

  The drive of 20 GB that I removed to install the largest capacity disk has been reinstalled after the failure of a larger. I am currently running on the same pc and the old drive. I have another drive of 20 GB that had XP installed on it earlier. Thinking that I might try that one that I started to load some of my other programs operating and when I installed Office 2007 for household use and selected updates online blocked system shortly after. The problem is therefore not only on new facilities. The reader that I use currently a Office 2007 is installed and it works fine.

  What is the largest disk that will handle XP? I heard it's 137 GB, is it true? If I can make it work how would you recommend I have partition the drive of 160 GB?

  Thank you

  XP can handle drives of 1 TB to NTFS without problem - it's the motherboard on computers more elders who may have problems, that it is not compatible LBA.
  There is really no need to partition the disk, but I would tend to opt for about 60 GB for the operating system and 100 GB of data and then move the folder My Documents (using the option in its properties) of the data partition. This allows to separate the data and programs and means a lot less work if a reinstall is needed.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Touchsmart 320 computer: Activation of Windows 7 after the replacement of the motherboard

  After that my PC has failed because the motherboard has been damaged by an electric shock, I replaced the motherboard in a Service of HP to the Chile. When I got back my PC it works fine, but after 1 week, it begins to show a message that says I need activate Windows 7. When I try to activate, it asks me the product key, but there is no place to find. After a few days it will lock up and I could ' t use more. I pick up the PC with recovery system and works very well the first days but again is asking me to activate Windows 7. Where can I get activation key for my Windows 7 original product? I want to continue to use my PC normally.

  Thank you.

  Greetings,

  There should be a Microsoft COA 25 character sticker attached to your system.

  Try the product on the certificate of Authenticity number.

  You will need to contact HP for the service if there is no COA sticker.

  It seems that HP did not tattoo the BIOS on the new motherboard with the correct information to auto activate the operating system.

  See you soon!

• Activation of Windows XP in the new computer.

  -Old hard drive, the new Machine

  I have a hard drive with Windows XP.  The machine from Dell, in which it was loaded crashes - most likely a motherboard problem.  I installed the HDD on another machine that has had its hard drive failure - virus suspected, etc..  The combination of 'new' hard drive with Windows XP and the Dell with the card mother work seems to work.  I get the error that I have to reactivate Windows XP to connect.  I can't connect Internet (I have not discovered why in this case) and the result by telephone (voice) says that ID is not on file (?) and gives a Web site for activation.  I can't access the Web on the machine, and the Microsoft Web site with the "solution" has the answer in form of download - once again, not good because I can't access the Web with the machine in need of activation.  The phone translates a computer, not a person.  I changed nothing other than to remove the hard drive of a machine which does not to whoever's doing.  What can I do?  Thank you.

  The operating system of Windows XP which is not the operating system on which was installed when you purchased the Dell hard disk from Dell? If so, it's probably an OEM version and as such is "related" to the system BIOS, it came with. It will not activate connected to a system with a different motherboard and a different BIOS. In addition, if an OEM, software license version is no longer valid because it is no longer used with the material with which it was purchased.

  The reason why you can't get an Internet connection is bound. Since the XP system on the hard drive has been used in the Dell system, it is configured to be used in the Dell. There the drivers for the Dell hardware installed. You will need to identify the current computer's ethernet card, download and install the appropriate drivers for this card.

  It is a method for activation of the phone:

  How to activate Windows XP by phone:
  To contact a Microsoft customer service representative to activate Windows by phone, follow these steps: 1. Click Start, point to programs, point to Accessories, point to system tools, and then click on activate Windows.

  Or,

  1. click on the Activation of Windows in the notification area icon.
  2. click on Yes, I want to telephone a representative of active windows customer service now.
  3. click read the Windows Product Activation privacy statement, click back, and then click Next.
  4. follow the steps to activate Windows by phone dialog box, and then click Next.

  Good luck

  Tom Ferguson