Activation of Windows 8 on the Vaio tap 20 error

Similar Questions

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Activation of Windows XP in the new computer.

  -Old hard drive, the new Machine

  I have a hard drive with Windows XP.  The machine from Dell, in which it was loaded crashes - most likely a motherboard problem.  I installed the HDD on another machine that has had its hard drive failure - virus suspected, etc..  The combination of 'new' hard drive with Windows XP and the Dell with the card mother work seems to work.  I get the error that I have to reactivate Windows XP to connect.  I can't connect Internet (I have not discovered why in this case) and the result by telephone (voice) says that ID is not on file (?) and gives a Web site for activation.  I can't access the Web on the machine, and the Microsoft Web site with the "solution" has the answer in form of download - once again, not good because I can't access the Web with the machine in need of activation.  The phone translates a computer, not a person.  I changed nothing other than to remove the hard drive of a machine which does not to whoever's doing.  What can I do?  Thank you.

  The operating system of Windows XP which is not the operating system on which was installed when you purchased the Dell hard disk from Dell? If so, it's probably an OEM version and as such is "related" to the system BIOS, it came with. It will not activate connected to a system with a different motherboard and a different BIOS. In addition, if an OEM, software license version is no longer valid because it is no longer used with the material with which it was purchased.

  The reason why you can't get an Internet connection is bound. Since the XP system on the hard drive has been used in the Dell system, it is configured to be used in the Dell. There the drivers for the Dell hardware installed. You will need to identify the current computer's ethernet card, download and install the appropriate drivers for this card.

  It is a method for activation of the phone:

  How to activate Windows XP by phone:
  To contact a Microsoft customer service representative to activate Windows by phone, follow these steps: 1. Click Start, point to programs, point to Accessories, point to system tools, and then click on activate Windows.

  Or,

  1. click on the Activation of Windows in the notification area icon.
  2. click on Yes, I want to telephone a representative of active windows customer service now.
  3. click read the Windows Product Activation privacy statement, click back, and then click Next.
  4. follow the steps to activate Windows by phone dialog box, and then click Next.

  Good luck

  Tom Ferguson

• Activation of Windows 7 after the failure of the HDD for gift

  Hello

  I have an old Dell Precision M70 I work to clean up to make a donation.  The laptop came with Windows XP, and I've upgraded to Windows 7.  I ran a utility to clean the hard drive boot and Nuke and thrown in my Windows 7 Upgrade disk.  I was surprised to see that it is installed, however, the activation key for Windows 7 Upgrade is not be accepted as a valid key.  I understand that it is a key to upgrade, but is it possible to validate anyway?

  I could give it's feel bad to do.  I would like to put this machine in fully functional form, but did not know that my upgrade product key should be rejected when I started.  I have a second laptop I had intend to do the same thing with, but don't have the key of the original product.

  Any advice on how to solve this key activation debacle would be greatly appreciated.  I would hate for my two licenses to upgrade Windows 7 will now be useless because I don't have the original XP Activation keys.  Never did.

  Thanks in advance for your consideration,

  Jim

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Activation of Windows 8 on the new computer

  I bought a new computer HP Envy and after turn on and through the stages of windows 8 for the first time, I did a windows update.  That's when the trouble started.

  When the update is finished, he gave me the message saying that the update failed and returning changes.  This change in recovery took some time.  After that is completed, windows is activated is no longer and he wants me to activate windows 8 by buying another key.

  I called HP and after many hours with their technology support the people, and re-start with restoration media which they sent me and get another key windows 8 Microsoft and typing in this new key, I have finally reactivated windows 8, did the updates, only to find the exact message update failed and there back the changes.

  Now, windows is not activated yet and I'm in the same place that I was two weeks ago.

  This seems to be a software problem, but how can I solve this problem?

  Well, I managed to upgrade my computer to windows 8.1.  The download took a lot of time.  After the upgrade, I typed in the same product activation code and he accepted as he had all of the previous times.  This time however, he did not that windows is not activated.  After several times, it still works well.

  I guess that it was a type of windows 8.0 but that 8.1 fixed.

• Activation of Windows 8 on the domain network with the VAMT 3 (v6.2.9200.0) tool hosted on Server 2008 R2.

  Hello

  I am trying to activate a Windows 8 Pro machine on the network of our field.
  In preparation to win 8, I had already discovered the obligation to upgrade VAMT 2 to 3 and I downloaded the ADK and installed 3 VAMT (v6.2.9200.0) on the necessary 2008 R2 server with SQL 2008.
  It's a simple process and the service of the VAMT tool is running. I have installed all required keys, whose VAMT is quite satisfied.
  I also installed KB2757817, which is required when you run VAMT 3 tool on 2008 R2.
  I run slmgr /dlv to verify that the server is functioning properly and that he got an active response.
  VAMT found many existing PC to Windows 7 and Office 14, which have been established against the keys KMS we received an envelope. That tells me that the KMS service is running with happiness.
  
  To make sure I looked at the Server Manager event logs. KMS watch log many event 12290, where the server is conclusion machines on the network, however the PC Windows 8 in these events will return an 0xC004F042 error code in their data, but Windows 7 PCs return 0x0 in their data.
  The VAMT tool on the server log shows an error event 1000 VAMT Runtime.
  To do this, the data are:
  Error when update products: System.Runtime.InteropServices.COMException (0x800706BA): the RPC server is unavailable. (Exception from HRESULT: 0x800706BA) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal (Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementScope.InitializeGuts (Object o) at System.Management.ManagementScope.Initialize () at System.Management.ManagementScope.Connect () at Microsoft.Licensing.VolumeActivation.WmiConnection.Connect () at Microsoft.Licensing.VolumeActivation.UpdateProductsProvider.RefreshMachineGenericInformation () at Microsoft.Licensing.VolumeActivation.UpdateProductsProvider.UpdateProducts () on the machine using credentials
  On the pc of Windows 8, I ran the slmgr /dlv, that tells me as the ends of product key: J8CK4, however my KMS - keys on the ends of the server: FKQW7. This report also says that I need to run slmgr /ato to activate the machine? (Isn't this defeat the point of a KMS server if each machine must be activated in the personalized decoration?)
  The KMS on the PC log is empty. The application log howerver, contains the following: -.
  Information event ID 12288 - the client sent an activation request. (The data for this show the IP address of the server VAMT, so his attempts to connect with the right server.)
  Information event ID 1003 - software protection service has completed to verify the license status.
  ID 8198 error event - Activation of licenses (slui.exe) failed with the following error code: hr = 0xC004F074.
  As our network has its own firewall, I have disabled the firewall on all internal machines on the field so there should not be any restrictions on network services or protocols.
  The RPC service is running on the server and the computer of Windows 8.
  As you can see, this becomes a bit frustrating, especially as the server of the VAMT tool works very well with all Windows 7 and 2008 machines on the field.
  I looked on the internet for all existing media or documents in this regard, but most point to upgrade to the 6.2.9200 version of the VAMT tool, which I am already running.
  You may be able to offer any assistance would be much appreciated.
  Thank you
  Barry.

  TammyGPV,

  I suggest you to report your query in the TechNet forums to improve the assistance on server problems. Here is the link: http://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc

  Hope this information helps.

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• Touchsmart 320 computer: Activation of Windows 7 after the replacement of the motherboard

  After that my PC has failed because the motherboard has been damaged by an electric shock, I replaced the motherboard in a Service of HP to the Chile. When I got back my PC it works fine, but after 1 week, it begins to show a message that says I need activate Windows 7. When I try to activate, it asks me the product key, but there is no place to find. After a few days it will lock up and I could ' t use more. I pick up the PC with recovery system and works very well the first days but again is asking me to activate Windows 7. Where can I get activation key for my Windows 7 original product? I want to continue to use my PC normally.

  Thank you.

  Greetings,

  There should be a Microsoft COA 25 character sticker attached to your system.

  Try the product on the certificate of Authenticity number.

  You will need to contact HP for the service if there is no COA sticker.

  It seems that HP did not tattoo the BIOS on the new motherboard with the correct information to auto activate the operating system.

  See you soon!

• I installed Dell Windows Vista on the Vaio, I can't do the drivers and software

  I have the Sony Vaio VGN-CR220E Vista Home Premium was pre installed on. I had to reinstall and borrowed A friends Dell CD. Nothing works right. How can I get the right programs for my Vaio

  It does not work like that

  You cannot use a disk from Dell on a Sony Vaio.

  http://eSupport.Sony.com/en/VAIO

  Here are the General news for the recovery to factory settings:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• activation of Windows 7 after the new drive hard installet.

  Anyone have the phone number for microsoft

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

  http://support.Microsoft.com/kb/950929/en-us

  or

  Direct activation number: (888) 725-1047

  1-800-936-5700

• Windows Server download the "Timed Ot" Drivers - error the manufacturers Web sites.

  I have Windows Home Server 2003, and all of a sudden I can't download drivers on Dell or HP printer readers from their site support site.  I tried to download to the top of the Office of the Home Server, my laptome, my desk top and laptop of my wife.  I tried to save and or running and tme all out.  I took my laptop to a coffee shop and downloaded a driver from their wireless then my church site and downloaded the other driver of their wireless.  Only change I know was a message telling me that a Home Server connector update was available.  How to load new drivers from manufacturers web sites?  My phone, if youdesire s 503-631-8488.

  Open System Properties (xp would be peripheral mgr), locate the system hardware, write

  the type of chip for laptop mfg. Once done, if hardware intel, go to www.intel.com

  Look for the link drivers, get some installed youre equipment & download. In addition, updated from microsoft

  should have most of the software, if not, in the L.sub column at bottom, "Administrative Options" in new

  window "windows update catalog", any software and drivers who pass the WHQL tests, will be listed.

  Also, check out. http://TechNet.Microsoft.com/en-us/WindowsServer/bb405947.aspx

• Impossible to run Windows Update, get the 8007370B and 8007371C error code

  I could not update vista windows for many months, I currently have 30 updates update download but unable due to the error of the codes 8007370 B and 8007371 C... Help!

  I think that my computer was infected :(

  Just out of curiosity

  1 - What is the installed security/antivirus suite.

  2 - and what other security software you run, if any?

  3 - is this 'software firewall' the Windows Firewall or a third-party firewall? If the latter, what is the name of this application.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Try to install the latest version of Flash for Firefox on Windows XP, get the Internet Explorer Script error

  I am trying to install the latest version of Flash (file install_flashplayer11x32_mssd_aih.exe), browser = Firefox 14 (current), OS = Windows XP.  I tried several times, making sure to disable Norton Antivirus Autoprotect first.

  At some point throughout the process - while downloading or during Assembly - I get the following error message:

  Internet Explorer Script error

  Line: 1

  Char: 10010

  Error: 'ActionLaunchAdobe' is not defined

  Code: 0

  URL: http://127.0.0.1:1174/app/_js/adobe.js

  Do you want to continue running scripts on this page? [Yes] [None]

  If I answer [Yes] or [no] the result is the same - the program crashes. It does not close, and when I close it manually it asks if I want to stop it. But if I leave it there, nothing happens.

  By the advice of the site, I uninstalled Flash in order to restart costs. This means that, instead of having an outdated Flash version, I now none.

  I tried to RTFM, but research for this error go empty.  I'm curious to know why Internet Explorer being participates in it at first. But mostly, I'm just curious as to how to get this thing to work.

  Thanks for you help with anything that can give me.

  Dave

  @nickzinck - please try to install by using the appropriate Setup program located here:

  http://helpx.Adobe.com/content/help/en/Flash-Player/KB/installation-problems-Flash-Player-Windows.html #main - pars_header

• Compatibility active Pen - Vaio Tap 21?

  The active pen works with the Vaio Tap 21?

  I did my own research this weekend - I took a pen in the best buy and confirmed that it is NOT compatible with the TAP 21

• Activation of Windows XP on a Dell Dimension 2400.

  Spent 3 hours transferred to numbers different media trying to activate my installation.  Due to a relocation after malware everything closed.  Until now, 2 emails to the support of windows (with no response that included pictures of my product key) and calls for the activation group, real profit and now were waiting for 1 hour with the technical support group.  Honestly, makes me want to run out and buy a Mac.

  How do to activate Windows XP by phone to contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  1. Click Start , point to programs , point toAccessories , point to System Tools and then clickActivate Windows .

     Or, click on the Activation of Windows icon in the notification area.

  2. Click on Yes, I want to telephone a customer the service representative to active windows now .
  3. Click read the Windows Product Activation privacy statement , clicknew , and then click Next .
  4. Follow the steps in the Activate Windows by phone dialog box, and then clickNext .

     Note The number appears now and differs based on the location you select.

  5. When activation is completed and you receive the following message appears, click OK .
     You have activated your copy of Windows.

  How to activate Windows XP by using the Internet to activate Windows XP by using an Internet connection, follow these steps:

  1. Click Start , point to programs , point toAccessories , point to System Tools and then clickActivate Windows .

     Or, click on the Activation of Windows icon in the notification area.

  2. Click Yes, let's activate Windows over the Internet now .
  3. Click read the Windows Product Activation privacy statement , clicknew , and then click Next .
  4. Use one of the following methods:
     • If you want to register and activate Windows at the same time, click Yes, I want to register and activate Windows at the same time , click read the Windows registration privacy statement , click previous , clickNext , type your contact information in the appropriate boxes in the registration form and then clickNext . An asterisk (*) appears next to required information.
     • If you only want to activate Windows, click No, I don't want to not register now; let's just activate Windows , and then clickNext .

     The wizard establishes a connection with an activation server and then processes the activation request.

  5. When activation is completed and you receive the following message appears, click OK :
     You have activated your copy of Windows.
  Back to top

  How to activate Windows XP by using a Modem to activate Windows XP by using your modem, follow the steps described in this section.

  Note The following steps are the same steps to activate Windows over the Internet in the "how to activate Windows XP by using the Internet" section. If you have an Internet connection and you want to activate over a modem, disconnect your Internet connection before you follow these steps.

  1. Click Start , point to programs , point toAccessories , point to System Tools and then clickActivate Windows .

  Or, click on the Activation of Windows icon in the notification area.

• Click Yes, let's activate Windows over the Internet now .
• Click read the Windows Product Activation privacy statement , clicknew , and then click Next .
• Use one of the following methods:
  • If you want to register and activate Windows at the same time, click Yes, I want to register and activate Windows at the same time , click read the Windows registration privacy statement , click previous , clickNext , type your contact information in the appropriate boxes in the registration form and then clickNext . An asterisk (*) appears next to required information.
  • If you only want to activate Windows, click No, I don't want to not register now; let's just activate Windows , and then clickNext .

  The wizard establishes a connection with an activation server and then processes the activation request.

• When activation is completed and you receive the following message appears, click OK :
  You have activated your copy of Windows.
Back to top

Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses