I installed Dell Windows Vista on the Vaio, I can't do the drivers and software

Similar Questions

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• Cannot install the drivers and software for HP Deskjet 5650

  I removed most of the HP entries to my printer from the Start Up. Since then I have not been able to get the Printer Wizard to start. Recently, I uninstalled everything related to the printer from Add Remove programs. Since that time I tried to install my HP drive. It comes up with the error that the software does not support my operating system. My operating system is Windows XP Home Edition SP3. The software is looking for Windows XP. I downloaded the drivers and software from HP. When it runs, it starts very well. For some reason, it isn't detecting my printer. After you select how the printer is connected to the computer and the connection at the same time the software tries to finish, but he comes up with an error and says it cannot complete the installation. I am able to install the drivers, but when I try to install the drivers and software is when the error appears. How can I fix? It would be nice to use the wizard for printer hp again.

  I found the solution to my problem. Before I could install the software and drivers for my printer that I had to remove completely all the software and the printer driver. Here's what I used to delete the printer driver. Restarting my PC after removing the printer driver has been the most important step. Everything works fine now.

• Photosmart B109n-z: can not install the drivers and software

  running on bootcamped macbook pro - the two installation packages pilot complete and basic fail with messages given that correct USB drivers and software is not found.    the printer loads and works very well for apple OS 10, but nothing can install of the operating system Windows - suggestions?

  What does the trick thank you!    Too bad they can't insert a step "jump the usb driver" in the install.bat file...

• How to download the drivers and software FULL of FEATURES

  Here are some steps that will guide you to download the drivers and correct full features on the site.

  This is about who will go to.

  http://WWW8.HP.com/us/en/support-drivers.html

  1. click on DRIVERS & SOFTWARE

  2. type your name number or product to printer in the search box

  3. Select SEARCH

  4. click on your correct product

  5. the next screen, it asks you to choose your OPERATING SYSTEM

  6. Select and click NEXT

  7. after having chosen NEXT, he asks to select a DOWNLOAD

  8 scroll down to (DRIVER - PRODUCT installation SOFTWARE

  9. the next page, click on DOWNLOAD

  10. it will load and EXTRACT

  This is how to download your drivers of all features and software. It gives you the functions of scanning.

  Hope this helps the community.

• All-in-One C310: impossible to download the drivers and software for the e-all-in-one-c310 series since the update to windows 8.1

  Since I upgraded my OS from Windows 8 to 8.1 Windows I have not been able to print to my printer all in one c310 or have I been able to use the Solution Center software.  I tried to update the software and drivers from hp website, but when I click on the download button, nothing happens.  Any advice?

  Hello

  Download and install the software from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL34215/MP-109761-2/PS_AIO_07_C310_FSW_Full_Win_WW_140_408-4.exe

  Please let me know if you encounter problems using this link as well.

  Shlomi

• Cannot load the drivers and software, can not remove current universal drivers drivers HP L7590

  I have officejet pro L7590 - my print drivers are the HP Universal print driver.  I would like to load the software and drivers for the original L7590 because I lost the HP Solution Center.  I downloaded the software and complete drivers for this model and tried to install it, but it tells me that I have updated drivers and it does not reinstall drivers print and software.  When I look at my file to the printer, it does not show my printer.  What can I do to get off the universal drivers and reload the original drivers.  I tried to uninstall the HP Universal drivers, but it does not appear in my programs.  Any help would be appreciated.  I also tried of revo uninstaller to uninstall the universal print drivers, but that has not worked.

  I am running Windows XP

  Thank you

  Karen has.

  Hi Allerk,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  

• can not find the drivers and software

  Hello

  I use an old Compaq presario 6000 series desktop computer. I had just formatted the Office to install a fresh sp2 XP. Unfortunately, after formatting and installing XP, I found that I had lost the CD for the drivers.

  I don't know how to find the number of model/product number for my office. But I had found something on top of the CPU devalued

  P6171AI/P4 - 1.9 G / 256 M / 40 G/D16W40/M

  Compaq P246LFM70115

  I don't know what is the model number and product number in the present. As such, I could not find the drivers. I'd be happy if someone could help me get ALL the necessary drivers. Also, I would be grateful if I could know the factors that I need to install (other than the VGA and sound).

  Thanks in advance

  Hello:

  The model number of the keyboard is the model # of the keyboard only.

  First install the chipset driver and reboot:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=316510&prodNameId=97128&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=PSG_I20521-104339

  I think this is the driver you need.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316510&prodNameId=97128&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=PSG_I22933-107769

  Audio:

  I think that's the one:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316510&prodNameId=97128&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=hd-17950-2

  If all of the above drivers work that I posted, because I can't find what model # your PC based on its hardware, you can find the drivers for a model with a similar material on the link below, if you need it in the future.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=97128&prodTypeId=0&prodSeriesId=316510&swLang=13&TaskID=135&swEnvOID=1093#113165

  Paul

• Can not download the drivers and software for my laptop from HP site

  Hello world

  When I try to download some driver and software for my HP dv3 http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=it&cc=it&dlc=it&sw_lang=&product=4217... from HP site the browser tells me who is 'impossible to start download' for most of the files. Sometimes only for a few configurations downloads starts but is too slow, about 9 kb/sec. I tried with different PC but the problem remains. I don't know if it's a question based on my computer or on the HP site. Can someone help me?

  Hi rbafkis,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are unable to download the software and drivers for your HP computer.

  The HP site seems to work very well as I just downloaded on it without problem.

  You are able to download from other sites?

  Have you tried using another browser to download?

  Have you tried running The HP Support Assistant to retrieve updates?

  Have you checked your firewall and virus checker setting to make sure it is not blocked?

  It could also be a firewall on your router setting.

  Have you tried to download from a hotspot or maybe a friends house?

  If you are unable to download the software desired, try another computer to download on a USB and then install the updates.

  After installing the updates, you have the same problem?

• I have a new computer and firefox crashes constantly on it, even though I disabled all addons. I've updated all the drivers and software. What should I do?

  Accident id also does not work, and does nothing when I ask for more details.

  Hey,.

  well, it is a known incident, please try the following (he reported to work for some users):

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

• Where can I find the drivers and software for the LaserJet Pro M1132 MFP on Mac OS Mountain Lion?

  Hello

  According to http://support.hp.com/us-en/document/c01664444 it doesn't seem to be a software and drivers for the LaserJet Pro M1132 MFP.

  When will they be available?

  I read in http://support.hp.com/us-en/document/c03427752 that "today, a solution for your printer is not available for the Mountain Lion. However, an update of the driver will be available in fall 2012 . "Since it's already winter 2012, a solution will be available before January 2013?

  Thank you.

  Hi Chun Pong,

  Seems to download the software I mentioned before has been deleted. This means that a new driver will be downloaded.

  Please visit the site from time to time if a new software is available. I'll keep an eye as well and provide an update here, if the new software can be downloaded. It may take a few days.

• Re-install my Windows Vista

  How to re - install my Windows Vista if it requires an administrator password to run anything and I don't know it nor do I have a backup Wizard Reset.

  Hello

  You don't need to re - install Windows. Check these and with your local computer store or system manufacturer.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/en-us

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dell Studio XPS 435MT disk hard clean install of Windows Vista

  My hard drive died on my Dell Studio XPS 435MT. I'm doing a clean install of Windows Vista 64 bit on my new HARD drive using DVD relocation provided by Dell with the PC.

  (1) I am not able to boot from the CD/DVD player, where is the DVD of resettlement. I have set the priorities of boot and disabled the boot from the HDD. Whenever I try to boot from the CD/DVD drive, I gives me a message saying "no Diagnostic Utility Partition identified; Press a key to reboot... »

  If I unplug the new HD, then, I am able to boot from the CD/DVD player and I can not for the Windows Setup screens. However, I can't then point nine hard disk installation.

  (2) as I said, I am able to start Windows Setup screens when the HD is initially disconnected during startup. After I get to the Windows Setup screen I plug HD on the motherboard. The new HD must be recognized if I do this? Currently it is not.

  (3) following the instructions here, I said I need to 'prepare a USB SATA key in advance.

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/Windows-Vista-installation/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/downloading-preparing-and-loading-SATA-drivers/

  What drivers to I need? I tried the drivers at this link, but when I try to load them on the Windows installation screen I get a message saying that they can not be found.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=DTT5X&FILEID=2731106696&osCode=WV64&ProductCode=Studio-XPS-435&LanguageCode=en&CategoryID=SA

  Thank you.

  I found this thread on the same subject. Unfortunately your BIOS update can be run from Windows, so that won't help. But down a suggestion to unplug and reconnect the hard drive. Looks like that might work for you.

• Do a clean install of Windows Vista 32 8.1; advice on the new partition formats.

  Hi, I'm going to do my clean install of Windows Vista 32 8.1 today.

  Need advice on the size for my new partition (s).

  Currently defined as the partitions:

  Total: free:

  OS (c                          99.7G          11.9G

  Data (D G 111, 14.5 G)

  HP_Recovery (E 12.0 G 1.97 G)

  I am running:

  Laptop HP Pavilion DV9700 Entertainment

  32 Vista Home Premium, SP1

  Basically I want a suitable partition for the new Windows OS 8.1 (more room for restore points).

  And the rest of the data area, I guess, as if I had originally.

  Does anyone have any other ideas, because I start from scratch.

  Hi davisj-oaktree.

  To remove the Vista partition, I included the following two links http://bit.ly/1dWZLLn, and http://cnet.co/1dWZQii. Please check the information on each of these websites.

  Good luck!

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom