Impossible to run Windows Update, get the 8007370B and 8007371C error code

Similar Questions

• get the 641 and 80070641 error code during the installation of Windows updates

  Original title : not able to have windows updates installed on the pc have vista and get code error 641 and 80070641 - what it means and how can I solve this problem please?

  Not able to install updates windows for my pc with the vista system. I keep getting error 80070641 and 641 codes. What do these error codes mean and how can I fix updates can take place please?

  Hi bvwga,

   
  Thank you for updating the State of the question.

   

  What is the error message you get when installing these specific updates?

   
  Follow the steps mentioned below and check if that helps.
   
  Method 1:
  Follow the steps in the link and check if the problem persists:
  http://support.Microsoft.com/kb/822798
   
  Method 2:
  Download and install KB2598041 and KB2596871 manually from the following link and check if you are to install it:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29372
   
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29362
   
  Method 3:
   
  You can try the suggestion mentioned in the following link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/security-update-for-Microsoft-NET-Framework-4-on/b57fc365-1b9d-48D3-a0ca-5568b64b31ed
   
  Hope this information is useful.

• Vista Windows update fails to install and gives error code A 80071, 30

  Windows Update for vista not install and give the error code A 80071, 30. How do I receive the updates installed and what is this error? Stem

  Original title: windows update error code a 80071, 30

  Hello

  Method 1:

  I suggest you to disable all security software, including the Windows Firewall and then check if it solves the problem.

  Check out the link to disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• updates to the U4M1I208 and U44M1I216 error codes

  Hi, I have the "design and web premium" when I try to update my programs I get these messages

  Hi cshellcorn,

  With regard to the e rror code: U44M1I210: I would like to share the following

  Error Code: average U44M1I210 have no file ZIP/DMG/extract a patch installation.

   

  Could you please restart your computer and try to reinstall this update.

  These links have useful steps:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

  http://forums.Adobe.com/thread/1095895

  Please let me know where always face you this problem.

  Kind regards

  Baudier

• Cannot use windows update, get the message "site has encountered a problem and cannot display the page you are trying to view.

  original title: can't use windows update, get the message 'the website has encountered a problem and cannot display the page you are trying to view. I am running xp. Can anyone help?

  I can't use the update. Still get the same message. Fix - it for Windows can not solve the problem. I am running xp. Help, please!

  Hi Hojo11779,

  You can see the mentioned knowledge base article and check.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Let us know if it helps.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Trying to get Windows updates, get the error code 80004005

  I can't upgrade my pc to windows updates... it seems to download but when the pc reboots it comes up saying failure and makes me again with the same result... It continues to flow upward with the error code 80004005, but cannot find a result or information on this code or what to do to solve this problem... any suggestions?

  * original title - I get the error 80004005 When trying to get updates... my computer updates not for some unknown reason and I can't find what this code means and what to do to fix it... Please help *.

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  what the version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install? (Number of KB)

  What error do you get everything when trying to install updates?

  Please do it in your next reply.

  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based http://support.microsoft.com/kb/914232computer >

  Error code 0x80004005

  This problem may occur if a file that requires product Activation Windows (WPA) is damaged or missing. This problem occurs if one or both of the following conditions are met:

  A third-party backup utility or an antivirus program interferes with the installation of Windows XP.

  A file that requires a WPA is changed manually.

  Try manually download and install the update problem - http://catalog.update.microsoft.com/v7/site/Search.aspx?q=KB935509>

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• in windows update, I can't download kb2833941 error code ox643! I have windows xp!

  in windows xp, I can't download kb2833941 error code ox643! I have windows xp!

  If anyone can help?

  First try this...

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If this does not fix it try this...

  Uninstall the .NET Framework 1.1.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941

  I would like to know what method worked for you.

  Ref: http://support.microsoft.com/

• Impossible computer XP SP2 update, get the 0x8024400A error

  Impossible to update xp sp2 computer. Had to use the recovery disk and reformat my hard drive...  Now, when I try to get the updates, I can't. Gives the error number: 0x8024400A. I'm administrator. I've tried all resolutions in Article ID: 836941, none worked. Cannot use fix - it because no sp3. I'm stuck. Help, please!

  Cliff,

  You will need to install SP3 (if it is not already installed) and then maybe you will get on the website for further updates.

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  You will need to be at the level of SP3 to access updates Web site.

  UTC/GMT is 20:56 on Saturday, August 11, 2012

• Try to update Windows XP SP3 Media Center by using Windows Update, get the error number: 0 x 80070424

  When you use Windows Update Center for Windows XP Media Center with Service Pack 3 installed, I now get the following message is displayed:

  [Error number: 0 x 80070424]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues) I looked at the FAQ which makes no mention of SP3 but support States SP2 is underway, can you help me?

  Hey PABear and John_P.

  I found another link, and it's worked perfectly

  http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

  Thanks a lot for your help, definetitely remember Windows Fix It for later use

  Dave

• Trying to do Windows updates, get the error 800b0100 Code.

  2 try to update are not up to date and I get error Code 800 b 0100 What Should I... ?

  Original title: error 800b0100 Code.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to see link and check.

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 2:

  If this does not help, install updates for the clean boot failure.

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

• Colors in Windows 7 too bright/faded after running Windows Update for the first time (everything was going well after initial installation). See the details.

  I just installed Windows 7 Pro on a HP Pavilion with a HP w2007 20 ". I have had no problem of color first and everything worked fine. The first time I ran Windows Update, it included an optional update called "HP - display - HP w2007 LCD wide screen". That the update "has failed" to install and when I rebooted, my screen had a look very 'neon' - my desktop background, a picture of a tree with a bunch of Red leaves, was very washed out and now most of the leaves were bright red with no visible details. This is obvious everywhere, not only my desktop background (another example... small green circles next to the names of Gmail chat contacts are very bright green, more even than usual). Everything is too bright. I tried the following hotfixes:

  -Manually reinstall the update of the HP screen (it worked this time) and restart - did not work.
  -Reset my monitor to factory setting - has failed.
  -Download and install the latest HP driver for this monitor - did not work.
  -Through: "Control panel-> appearance and personalization-> display-> Calibrate color" and through an assistant color calibration (that's new for Windows 7?). Also, did not work.

  I have the dual-boot of Ubuntu installed on this machine and I think the colors under Linux are always very well, so I think it's a problem with Windows and not the monitor. Because it was working fine before, I would rather try to get everything worked, rather than the update manually the brightness/contrast of my monitor. Any ideas?

  A useful answer, I got on another forum (windows7forum.com). It worked:

  I had this problem too!

  In my case it is also explained by a driver from Windows Update called "nVidia display".

  Fortunately, I figured out how to fix it:

  1. Open Computer Management (start > right click on "Computer" > Manage)
  2. Select "Device Manager".
  3. Select 'show cards '.
  4. Right click 'NVIDIA GeForce 8600 GT' (or whatever your video card)
  5. Click 'properties '.
  6. Select the 'Drivers' tab
  7. Click on the button "return to the version.

• Vista - during the Windows Update, get the error "computer restarted unexpectedly or encountered an unexpected error.

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  * original title - no error number. Message says: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. to install Windows, click "OK" to restart the computer, and then restart extra

  While using the computer, a message appears that says a windows update had to be so I followed the instructions and started updating.  Courses through the computer restarted, then this window will appear.  I clicked 'OK' and the computer restarted again, but now only the loops with the same message.

  The computer works fine for the past several years and I have not tried to change the settings or the operating system.

  Hey dkeeney2330

  ·                        try a restore system before this

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. reboot your computer.

  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.

  3. Select theSafe Mode option with the arrow keys.

  4. pressenter on your keyboard to start mode without failure of Vista.

  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Vista goes into safe mode.

  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that didn't he corrects not reposting in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Try to install Windows updates, get the error Code: 0 x 80070645

  WHAT fault Setup error Code: 0 x 80070645 means? I try to make updates every time I get this error what does that mean

  Hi Opal bell.

  It is to day/upgrade Microsoft Security Essentials in particular?

  If so, take a look at the article here with troubleshooting.

  I hope this helps!