Activation of Windows XP after you edit the file system drive

Similar Questions

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• Problems with sound after you install the operating system

  I have a compaq presario that originally vista os, the system crashed and I could get the recovery work so I installed windows xp and now I'm having problems with the sound. What should I do? I tried to locate the drivers requarding info. I keep getting error messages indicating that I have no audio device. Is it possible to go back to vista? I don't have an instillation cd or recovery for vista cd. Any help would be great.

  Hello

  Go to the link drivers HP > search your computer number model > XP OS > download and install the audio drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If no audio driver XP is available, HP provides them.

  Through the installation of XP, you have destroyed the provided HP recovery Partition Vista to reinstall Vista:

  Solve a common problem of recovery with the HP Compaq computers.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be started from either the desktop or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
   
  Contact HP and ask them to send you a set of Vista recovery disks.
  Normally, they do this for a small fee.
  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340446095470.876444892.199480143
   

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Propeller: Graphics distorted in Windows applications after you install the latest version of the graphics driver (3643)

  After downloading and installing the latest graphics driver for lenovo support pages (10.18.10.3643) I noticed that some graphics in Windows applications are distorted. Generally, it looks like a refresh or memory problem. If you start the application that everything is OK and after using it awhile (or switch to another app and back)

  For example, Onenote radial menu looks like this:

  

  Where is should look like this:

  

  Over time, it could get worse, as the entire application has problems how to freshen up, or this menu does not lose only icons, but also the colors, etc..

  I tried to reduce the demand for resources by disabled anti-aliassing, but it does not help.

  Normal windows applications do not have the problem and friendly resource (for example not chart orieted apps) takes more time to show the same behavior.

  It is 'just' a bug in the driver, or y at - it shape a setting I have to solve this problem?

  Thank you

  Ruud

  the version that the system put in place after unistalling the last display dirver is:

  Version: 9.17.10.3190

  Dirver date = 20/06/2013

  = Intel driver provider

• Windows does not restart after you install the new hard drive.

  Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

  Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

  The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

  every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

  I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
  And if a later version of the sata it's backward compatible?

  Use the utility disk provided by the manufacturer of the drive check

• BOOTMGR is missing after you mount the new hard drive

  I have an acer 6930g laptop using windows vista. My laptop crashed and left the hard drive corrupt / unreadable, so I set up a hard drive again.
  When I start it shows message BOOTMGR is missing.on restart alt f10 not work.i have the 2 dvd backup which I was invited to burn when I first bought computer I tried to load these, but the ability to load backup Hi drive light not so can not click on it. This option is the factory restore and it shows error impossible restoration - reason 0xd000000d. Click ok to restart the computer... and then I am back to BOOTMGR missing again.

  Hello

  If you created the backup restore disc complete by using Windows backup and restore, you try to perform the system restore. If you have not created backup disk using restore option, I suggest you to contact the computer manufacturer to restore Windows vista.

  Warning: When you use a Windows complete PC backup image to restore your computer, it is a complete restoration. You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten. You must regularly back up your files by using the back up files Wizard.

  For your reference, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• InDesign crashing after you open the file :(

  I have this file... which was ok... but all of a sudden when I worked indesign creashed... when I tried to open it... his opens the file and after showing a cherry moment... it crashes HELP is urngent!

  This is the file

  http://media.mouzenidis-travel.ru/design/open/Poland%20Catalogue.indd

  the problem was with a history of corruption... so the problem had been corrected in this file

• The files are missing after you download the file published to SCORM

  Hi all

  I don't know if this is a problem in Captivate 9 or SCORM. I have a few buttons to open the files. I changed the Flash security settings and added all the related files as trusted.

  When I saw in the browser, they worked. However, once I downloaded the published file (zip) to SCORM, the buttons do not work.

  I have a button to link to the specific URL, who works in SCORM. However, two buttons to link to the pdf and jpg files do not work in SCORM (but worked in the preview).

  Someone this problem? I would really appreciate if anyone can help with this problem.

  I use 9 Captivate and Mac.

  Your question can be connected with the way in which your LMS plays files. Try to download and test your SCORM, SCORM Cloud to see if it works from there.

  And another thing to check is that you have not only used the link to the file on your computer as the link.  You need to make sure that the files are loaded in the same folder as the SWF file output and set the link to them as being the file name only.  Then there should be a link that works for almost any server on the web, including most of the LMS.

• Need help after you insert the CMS system

  Hi on my site ive inserted a system of Cushy CMS. It all work that is not the problem. The problem is that my page is a mess now... The only thing ive addes is a code cms so im hoping that the solution is not difficult to do.

  There are three pages what is changed full.

  The home page

  http://www.vakantiewoningeninsuriname.nl/index.html

  The text column to the right is less moved. How is it possible to place this back?

  on http://www.Dorff.nl/ you can see how it was before I add the CMS.

  The next page is:

  http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html

  You can see that there is much more space between the head and the text. And you see that the text is not only the anymmore on the right side.

  This is how it should be:

  http://www.Dorff.nl/bezienswaardighedenparamaribo.html

  It goes the same for this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  And that's how what it takes:

  http://www.Dorff.nl/Prijzen.html

  Hope you can help, thank you for the research...

  Kind regards Brian

  braico wrote:

  Dear Jacqueline,

  Thank you for your reply,

  I'll try to explain again what is wrong. On my website, you see this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  Problem is the image below on the right side of the page instead of the left like the other pictures.

  On:

  http://www.Dorff.nl/Prijzen.html

  You can see what it should look like... Photos to the left and the text on the right. I don't know what happened when im adding the Cuschy CMS. Hope you can see what the problem is.

  You have the two last property on the wrapped page entries in the

  "one_half_last" when that

  must encapsulate the entry of details of each property individually. That is why the last image is more to the right.

  What I would do is remove the entries of two last property (images and text) on the page, copy the code from the entrance of the two property then paste it under twice, making your entries in four properties. Of course, you need to update images and details of the property as well.

  OR if you're good with the code alters entered two details latest properties are isloated in their own "one_half_last".

• After you install the new hard drive, it indicates that the product key is not valid for activation on Windows Vista Edition Home Premium

  I just got a new hard drive installed on my computer. He already has Vista Home premium on it. Now when I turn it on it tells me that I typed the product key is invalid for activation. I never typed in one. Now, I don't know what need cause I don't have a disc or product key. What can I do? Please tell me I'm not screwed. Any help is appreciated. At the bottom it says Build 6000 this copy isn't genuine.

  Hello

  1. what operating system is installed in your new hard drive?
  2 are you able to boot into desktop/safe mode?
  3. What is the number of brand and model of the computer?

  I suggest you to consult the following Microsoft article.

  How to activate Windows Vista:
  http://support.Microsoft.com/kb/940315

  Activating Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  How to find a phone number for a Microsoft Product
  Activation Center:
  http://support.Microsoft.com/kb/950929/

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539

  Genuine Windows: Frequently asked questions 
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

  Hope the information is useful.

• Windows crashes after you enter the password to connect

  Hello

  I'm trying to connect to my system (Windows Vista) and once I get the password to the Welcome screen then screen black with the mouse pointer and all activity stops. The small led that flashes when the CPU turns off completely, which means there is no current activity. The only way out of this is difficult to the system startup.

  I did not go to the updates to the system. The last time that I logged it automatically ran a chkdisk.

  I can start the system in safe mode and tried to clean the boot and then start the system, the system connects and then everything freezes like before. All my services (clean boot) are off at the moment. I also tried to recover and from recovered point previous and who did not help as well.

  Can anyone provide any indication as to what may be the problem?

  You have a Vista DVD, if yes begin with him in the recovery environment and
  Choose the command line? If it's not see
  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  Type in the command prompt
   
  Chkdsk /r c:\
  sfc/scannow
   
  If this does not help
   
  Restore your computer again with the DVD. If no DVD instructions
  for a Dell but others will be similar.
  http://www.ehow.com/how_2134715_dell-Windows-Vista-factory-settings.html
  --
  ..
  --
  "LoginIssue" wrote in message news: 2c38fe18-7062-43ef-9587-43cf91518963...
  > I've tried that and all reboot I get a message saying: could not open file
  > for direct access. I event tried to do a diagnostic hard drive in BIOS
  > screens and it failed. Now it does not connect through safemode as well. Is
  > it something that I can do it again?
   
   

• Cannot connect online after you change the settings system locale

  Hello

  Right now I have my locale Japanese system, it was originally English (United States). I can connect to the internet just fine until I have change the local back to English. Once I've got change for English I can't seem to connect online. I tried all the steps to fix the internet connection, but nothing helped.  However, if I set the locale Japanese system once again, my connection works fine as if there was nothing wrong with it in the first place.

  I must be able to connect with the English locale, so if anyone has any suggestions, I'd be very happy.

  Hello

  If connection involved any kind of ID / password etc you have to type in (or it is saved in the cache/shape) you will have to redo, or clear the cache.

  Language change can alter the charchters game and produce grabled id/pw and other identification information.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How to make a VB script on the computer after you change the files?

  Original title: HI! I have to run a VBscript on windows7 as modfying user (not administrator) files in c:\program files\mycompany. Is this possible?

  It works to disable the UAC. There is no way to let him work with UAC on? (Perhaps change somehow permissions files?)

  You have two options:

  • Turn off UAC (not recommended)
  • Change the script so that it generates a UAC challenge (to which the user must respond with an admin account & password).

• Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

  * Original title: Vista 32-bit SP1

  I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

  I will certainly help you with this issue.

  This problem may occur if one of the following conditions is true:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Here are a few articles that you can consult in order to solve the problem.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

  How to obtain the latest Windows Vista service pack 

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

  Solve the problems when you can't install Internet Explorer 9

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.