Windows does not restart after you install the new hard drive.

Similar Questions

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• After you install the new hard drive, it indicates that the product key is not valid for activation on Windows Vista Edition Home Premium

  I just got a new hard drive installed on my computer. He already has Vista Home premium on it. Now when I turn it on it tells me that I typed the product key is invalid for activation. I never typed in one. Now, I don't know what need cause I don't have a disc or product key. What can I do? Please tell me I'm not screwed. Any help is appreciated. At the bottom it says Build 6000 this copy isn't genuine.

  Hello

  1. what operating system is installed in your new hard drive?
  2 are you able to boot into desktop/safe mode?
  3. What is the number of brand and model of the computer?

  I suggest you to consult the following Microsoft article.

  How to activate Windows Vista:
  http://support.Microsoft.com/kb/940315

  Activating Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  How to find a phone number for a Microsoft Product
  Activation Center:
  http://support.Microsoft.com/kb/950929/

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539

  Genuine Windows: Frequently asked questions 
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

  Hope the information is useful.

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• P6-2009it: the computer does not start after you install a new videocard (msi Gtx 960)

  Intel Core i3-2120 Socket H2 (LGA1155)

  Foxconn Intel H61 2ABF (Cougar Point)

  P6-2009it

  Power supply - corsair CX500

  Do not run the single image windows start and all. I can't go anywhere, WHAT BIOS is not also responsible.

  Right now is the radeon hd 6950 2 GB video card.

  BIOS updated to the latest version 7.16 - has not helped

  remove the previous video card driver - has not helped

  I leave the battery on the mother 10 minutes card - has not helped

  Nothing helps, what's the problem?

  Hirurgrrr, welcome to the forum.

  The problem you are experiencing is caused by the fact that the GTX 960 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  The last series of video cards that does not need UEFI is the GT 640.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Sound does not work after you install the update of the IDT High Definition CODEC on DV6 series laptop driver

  Hi, I have edition entertainment laptop HP Pavilion dv6 Windows 7 64 bit OS. I'm used to unsuccessfully drivers every month and everything is fine, but 3 days ago I downloaded the new IDT High Definition Audio CODEC drivers. After installing his system stops working. I tried several times to back the drivers and install them again, but in both his case has not appeared. What should I do?

  Hello

  Uninstall the driver, and then install the codec Microsoft UAA before reinstalling the previous audio driver.

  Please post your results here in your thread.

  Best regards

  ERICO

• BOOTMGR is missing after you mount the new hard drive

  I have an acer 6930g laptop using windows vista. My laptop crashed and left the hard drive corrupt / unreadable, so I set up a hard drive again.
  When I start it shows message BOOTMGR is missing.on restart alt f10 not work.i have the 2 dvd backup which I was invited to burn when I first bought computer I tried to load these, but the ability to load backup Hi drive light not so can not click on it. This option is the factory restore and it shows error impossible restoration - reason 0xd000000d. Click ok to restart the computer... and then I am back to BOOTMGR missing again.

  Hello

  If you created the backup restore disc complete by using Windows backup and restore, you try to perform the system restore. If you have not created backup disk using restore option, I suggest you to contact the computer manufacturer to restore Windows vista.

  Warning: When you use a Windows complete PC backup image to restore your computer, it is a complete restoration. You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten. You must regularly back up your files by using the back up files Wizard.

  For your reference, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• 0x0000007E error when you install the new hard drive

  Hello all,.

  I know there have been other questions about this message, but they are all people who can enter their disk in folders etc hard and changing pilots.  I can't.

  What happened: have a laptop ASUS, old for a few years.  got a top virus that killed my boot sector of the hard drive.  I can get into my hard drive and get off the old files, but cannot format or run a recovery on it.

  So... bought a new HDD to install it.  received an error message.  Was told to format it with a primary sector I did... always get the following error:

  A problem has been detected and windows has shut down to prevent damage to your computer

  (blah blah blah)

  STOP: 0X0000007E (0XC0000005, 0XF75DE0BF, 0XF7A2A208, 0XF7A29F08)

  PCI.sys - address F75DE0BF base at F75D7000, datestamp 3b7d855c

  Help!

  I tried the ASUS recovery discs... big error messages appears.  Tried to use the Windows XP disk... This error message.  Any ideas?

  Thanks in advance

  Carpet

  STOP: 0X0000007E (0XC0000005, 0XF75DE0BF, 0XF7A2A208, 0XF7A29F08)

  PCI.sys - address F75DE0BF base at F75D7000, datestamp 3b7d855c

  Help!

  I tried the ASUS recovery discs... big error messages appears.  Tried to use the Windows XP disk... This error message.  Any ideas?

  Thanks in advance

  Carpet

  Hi mast the pci.sys - address F75DE0BF base at F75D7000, datestamp 3b7d855c error is the result of your drive of windows either have no service pack or service pack 1. You must at least sp2 disk to enable PCI express ports. Follow instructions on the link below to integrate the sp3 in the disk, and then reinstall windows. Problem solved.

  Slipstreaming Windows XP to create a Bootable Windows XP CD or DVD

  I post some answers... No questions asked... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• USB does not work after you install the utility on Satellite A200 Intel chipsets

  Hello.
  I installed Win XP Pro SP2 on my Satellite A200-1SM and everything was ok until I installed Intel Chipset Software Installation Utility version 8.2.0.1014 (recent ones on the site of download of Toshiba; before this step all USB dev. worked properly), after all my USB devices wouldn't work. I had my windows up-to-date with updates from Microsoft, but that has not changed a thing.

  I use Vista once again, but still want to work one day at the XP operating system.

  Please help me if you can.

  Like the previous user said, the chipset must be installed as first pilot
  In addition, it seems that this laptop supports the Intel® GM965 + ICH8M Intel chip.
  It would be advisable to check the version of the Intel page directly

  Hey Buddy

• The Windows Installer appears when not claimed after you install the new printer.

  I installed a Canon S400 printer and now when I open a folder, file or no matter what shortcut (either by double clicking or right click Open) MSI is trying to install one of the two applications PDF I had already installed. After canceling the installation program, the file opens. How can I fix? I am running Windows XP SP2. Please do not say reinstall applications, I have uninstalled them because they proved to be useless junk.

  If you don't want to reinstall applications, then use the Windows Installer Cleanup utility to remove these entries.

  Clean Up MSI (Windows Installer) - http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

  MS - MVP - Elephant Boy computers - don't panic!

• The dynamic Cache Service Microsoft Windows is not resolved after you install the hotfix

  Installed hotfix http://www.microsoft.com/download/en/details.aspx?id=9258 on Win 2008 64 bit Enterprise edition.

  Dynamic Cache in good working Service Manager service. Changed the registry options, but showed no improvement in results.

  When copying or working with large documents (example: size 35 GB) Windows 2008 64 bit for Windows 2008 64 bit system memory shared network folder always go up as much as 9GB. But even when Windows 2003 32-bit system and data on Windows 2008 64 bit there is no problem.

  What are the possible ways to solve the problem of high memory consumption?

  Thank you
  Babu Nacka

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Outlook 2003 does not work after you install the update Outlook 2007 (KB2412171) _

  I run Windows 7 and Outlook 2003 but the update automatic KB2412171 causes Outlook to crash into the opening with the message "Microsoft Outlook has stopped working" and the program must close so I'm not able to use Outlook at all.

  Please can someone help me with this.

  In these forums, you will find some support for Outlook (2003): http://social.answers.microsoft.com/Forums/en-US/category/officeoutlook ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft