Activation problems and the computer crashes
Original title: help
I mean I used my pin code to activate my Microsoft, but frozen loading so it restarted and I returned it but he said he could not load because it has already been used! what I do and it says im on a trail and its going to expire
Hi Jennifer,.
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description, there are questions while activating.
These problems may occur when you connect to the Internet through a proxy server where basic authentication is enabled.
Perform the steps from the link below and see if it helps.
Activation of Windows fails and may generate 0x8004FE33 error code
Hope this information helps.
Answer to us if you are having problems with the Activation of Windows or any other Windows problem, and we would be happy to help you.
Good day!
Tags: Windows
Similar Questions
-
sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down
Hello
- What is the full error message?
- What were the changes made to nfore this question?
- What exactly do you mean by "no authority running avg or malwar bytes?
It's a possibility that there is a startup program that is launched with a command line and it appears.You need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual. -
an error message appears indicating the pc has a problem and the computer shuts down
an error message appears saying the pc has a problem and the computer shuts down.
What do you do when this happens? It is the way in which computers to protect the components of your computer.
-
RAM fills and the computer crashes, the rendering stops
When I made video, works some time and memory starts to become soiled and the computer freezes.
OK... do a new project and import this clip problem ONLY... and try to export as. If it crashes, I would suggest transcoding which clip to another codec, probably Cineform 10-bit YUV, which would keep all the original quality and although larger, would probably be much easier on your platform to manage as the less compression and construction of compression take far less work to manage CPU.
If the video works perfectly in the new project, there is something in the old project on this clip... somewhere in the cache, multimedia database files or even the file of the project, which is corrupt. Then, rebuild your project into a new project. Import goods and operate on it. Best wishes!
Neil
-
When I start the system upward, it goes to my logon screen and the computer crashes
I have a windows vista computer and when I start the SUST until it goes to my login screen, I connect the Welcome screen comes the computer hangs... I do a control-Alt - Delete that returns the desk top
When you get on the desktop, open the start menu to search msconfig and press ENTER.
When the popup window appears, it should start under the general tab, and you should see normal startup. For now, set it to start diagnosis, press ok and restart the computer. If it still crashes, then replace the and set it back to normal startup, as something else is causing this problem.
If she does not hang, and then back up the, set back to normal and this time go to the Startup tab. The list is all the things that are set to start when you start your computer. One of them is causing the computer to crash.
If you have an idea that it might be that you can deselect it, apply, then reboot and see if it still crashes. Or you could just go in the list, one at the same time turn them off then restart suspended far, so you know which is the cause.
-
Pop up are on your opening page except if you join us, blocking the computer! The only way to fix it is to restart the computer and uninstall anything related to Mozilla!
Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
You can try these free programs to search for malicious software that work with your existing anti-virus software:
- Microsoft safety scanner
- MalwareBytes' Anti-Malware
- TDSSKiller - AntiRootkit utility
- Hitman Pro
- ESET Online Scanner
Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.
More information can be found in the article troubleshooting Firefox problems caused by malware .
This solve your problems? Please report to us!
-
Lost disk and the computer crashed
I have the Creative suite 6 on a computer that broke down, and so I hope to be able to install the program on the computer/laptop replacement.
I can't find the disks, but have the serial number.
How to get the disc or download?
You can download installers CS6 on https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
-
Th.is is very young in the last days I did the update and it started having the problem. Perhaps Mozillo may wish to review their last update. Before that, I've never had a problem
I've upgraded to a new version of Firefox 41.1 when I received the message that he was available. The problem seemed to go away when I did.
-
Satellite Pro A200 (PSAF4A) - HARD drive stops and the computer crashes
Hello
It's my first post in this forum, but certainly not my first issue
I recently had to re - install Windows Vista on my laptop because I had an undetectable virus that attacked Windows and made him useless.
Before that, I had many, many startup errors and windows crashes, but which were preventable or fixable. After the re - install, I noticed that windows stability was much better until recently.I have not changed the settings or anything what so ever on my computer laptop which could affect the performance somehow, but I have a new problem.
If I have my computer running, performing tasks of base for a few hours I notice that performance and all of a sudden my computer completely stops responding.
The disk shows no signs of life after this point, and his only solution is a "disruptive Shutdown.
This appears in the reliability monitor and performance that all this, there is no input error, and nothing is done after.I also noticed if either windows defender or other my antivirus runs a system scan that my performance is reduced to the point where I can't run a simple task like opening an Explorer window. This also translates to total non-response. This never happened before a week ago and now it happens every time.
These two started within the past few days and there is no clear reasoning behind it. My inactivity of the processor is always the same, no new processors added and no settings changed.
This could be a problem with Windows, my HARD drive, my CPU or something worse?
Is there a reason why is happening and is there a solution either of these problems?
First of all, you reinstall Windows with the Toshiba recovery disc or disc of Microsoft?
It's strange and not easy to say what's wrong, but in your case I would test the RAM and HARD drive.
There are special tools to test the following:
http://www.HitachiGST.com/HDD/support/download.htm#DFT
http://Memtest86.com/On the two Web site, you can download a CD image. Burn it to a CD, start with him and then you can test parts.
Good luck!
-
My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?I want to get my virtual memory works again?Thank you very much in advance!
I'd start first with the chkdsk/r.
Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?
Here are some instructions:
http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm
Where people have no XP bootable media, here are my instructions:
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
I have a mac and lightroom 3.6. I have never had bad to import photos before. Today, whenever I try to import photos from a memory card or my computer, the icon "on hold" is displayed and the program crashes. Only way out is to force the resignations of lightroom. How can I fix this and why this is happening?
Only, I solved the problem... My mac has updated the day before to a version that is not compatible with my old version of lightroom. Only way to solve this situation is to buy the upgrade.
Thank you very much!
-
Someone else has problems with their computer crashing once they have installed the Nik for Photoshop CC filters?
Hi amlportraiture,
Could you please let us know the exact version of Photoshop you're working on, also did you copy the Plugins and move it to the folder Plugins in Photoshop?
And please make sure you have the latest version of Nik Collection Installer on the computer.
Kind regards
Tanuj
-
My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly. How to solve this problem?
Hello
Check if the hard disk needs repair.
Open the disk utility, located app in HD > Applications > utilities
Select Macintosh HD on the left then click the first aid tab, and then click Run.
-
Cannot open word document because a
"appropriate graphics importer is not found."
I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. Can you direct me while I have when I want the word docuents to open they will be?
Right click on the saved file.
Select: Open with on the shortcut menu.
Click: Choose [default] program
Letter: Microsoft Word
Check: Always use the selected program to open this type of file.
Click OK.Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
Downloaded CC and could open only once. Tried to download PS and the computer is off Mid-download. Now I can open is more than CC. It does nothing or said there was a problem and windows have to close. Help, please!
ininstall all cc
clean a http://www.adobe.com/support/contact/cscleanertool.html
Restart your computer
Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud
Maybe you are looking for
-
Satellite A210-1AO - RAM max support
Processor: AMD Turion 64 X 2 Dual-Core Mobile Technology TL-60/motherboard: IAALA LA-3631 P/RAM complectation: 2 048 (1 024 + 1 024) MB, DDR2 RAM 667 MHz/Vista 32-bit. For the optimization of the system PC Max RAM can I replace inside? And don't ship
-
Satellite U940 - 11b - need help with recovery files
Madam/Sir, I have a question about a failure U940 - 11 c. The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following mes
-
Satellite C660 - keyboard lack characters while typing
If I type a series of letters on the keyboard he decides to miss some characters and type them notI just had to go back and fix everything all the time Help, please.
-
Windows vista laptop, but the activation code on the bottom is for windows xp pro, what I can do
-
x 34 and Consoles through HDMI - of known issues?
Hi all A context of fast - I am a PC Gamer running a XB270HU to DisplayPort (980Ti GPU), looking to spend a x 34 for an experience ultra wide angle and for additional HDMI input for games console on the side. I understand the game Console will not be