Lost disk and the computer crashed

Similar Questions

• RAM fills and the computer crashes, the rendering stops

  When I made video, works some time and memory starts to become soiled and the computer freezes.

  OK... do a new project and import this clip problem ONLY... and try to export as. If it crashes, I would suggest transcoding which clip to another codec, probably Cineform 10-bit YUV, which would keep all the original quality and although larger, would probably be much easier on your platform to manage as the less compression and construction of compression take far less work to manage CPU.

  If the video works perfectly in the new project, there is something in the old project on this clip... somewhere in the cache, multimedia database files or even the file of the project, which is corrupt. Then, rebuild your project into a new project. Import goods and operate on it. Best wishes!

  Neil

• roar of hard disk and the computer freezes for a few seconds

  My hard drive makes a sound whirring for a few weeks now and when I type in emails or messages like this, the computer freezes for a few seconds. Any ideas how to fix this?

  A desktop computer. Your problem could be overheating.

  You must remove the side panel right and remove dirt dust bunnies fans. Also, make sure that all the fans are working. Safety switch the computer off and pull the power cable before removing the side panel. You can then move the computer backon and check that the fans are working.

  Then, turn off the computer and some time for that cool. It is best to use a wrist band, which you set on the casing of the computer to you the earth before touching anything inside the envelope. You can buy one in a store of computer accessories. Static electricity can damage a motherboard if you don't take precautions.

  Then, you use a small brush to remove the sheep of dust around the fan on the processor. I used an electric razor, cleaning brush. I use an Air blower to clean the power supply fan. An air Duster is also useful fopr cleaning keyboards.

  Removal of the dust bunnies should reduce the noise that makes your computer. It can also reduce overheating, which can lead to errors of Blue Screen of Death.

  Another way to check the hard disk to see if it is overheating is to use HD Tune 2.55 (free):
  http://www.hdtune.com/download.html

  You have to scroll the page to see the freeware version.

• When I start the system upward, it goes to my logon screen and the computer crashes

  I have a windows vista computer and when I start the SUST until it goes to my login screen, I connect the Welcome screen comes the computer hangs... I do a control-Alt - Delete that returns the desk top

  When you get on the desktop, open the start menu to search msconfig and press ENTER.

  When the popup window appears, it should start under the general tab, and you should see normal startup. For now, set it to start diagnosis, press ok and restart the computer. If it still crashes, then replace the and set it back to normal startup, as something else is causing this problem.

  If she does not hang, and then back up the, set back to normal and this time go to the Startup tab. The list is all the things that are set to start when you start your computer. One of them is causing the computer to crash.

  If you have an idea that it might be that you can deselect it, apply, then reboot and see if it still crashes. Or you could just go in the list, one at the same time turn them off then restart suspended far, so you know which is the cause.

• What is BRetail benefits! You may not know whatever it is without being part and the computer crashes until you uninstall Mozlla!

  Pop up are on your opening page except if you join us, blocking the computer! The only way to fix it is to restart the computer and uninstall anything related to Mozilla!

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• I lost the original printer disk and the computer shows different version. I want to know how to download original Dell V515w printer on my computer.

  Original printer disk is Dell V515w but I lost it. A friend installed a DellV310-V510 series. I can't use my fax machine.  How can I download original disc on my computer.

  Select your model of printer on the Dell support site, then download and install the drivers:
  http://www.Dell.com/support/drivers/DriversHome/NeedProductSelection

  To see if you have Windows 32 or 64-bit:

  1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
  2. Under system, you can view the type of system, it will say 32 or 64 bits.

  Vista - add a printer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• Satellite Pro A200 (PSAF4A) - HARD drive stops and the computer crashes

  Hello

  It's my first post in this forum, but certainly not my first issue

  I recently had to re - install Windows Vista on my laptop because I had an undetectable virus that attacked Windows and made him useless.
  Before that, I had many, many startup errors and windows crashes, but which were preventable or fixable. After the re - install, I noticed that windows stability was much better until recently.

  I have not changed the settings or anything what so ever on my computer laptop which could affect the performance somehow, but I have a new problem.

  If I have my computer running, performing tasks of base for a few hours I notice that performance and all of a sudden my computer completely stops responding.
  The disk shows no signs of life after this point, and his only solution is a "disruptive Shutdown.
  This appears in the reliability monitor and performance that all this, there is no input error, and nothing is done after.

  I also noticed if either windows defender or other my antivirus runs a system scan that my performance is reduced to the point where I can't run a simple task like opening an Explorer window. This also translates to total non-response. This never happened before a week ago and now it happens every time.

  These two started within the past few days and there is no clear reasoning behind it. My inactivity of the processor is always the same, no new processors added and no settings changed.

  This could be a problem with Windows, my HARD drive, my CPU or something worse?

  Is there a reason why is happening and is there a solution either of these problems?

  First of all, you reinstall Windows with the Toshiba recovery disc or disc of Microsoft?

  It's strange and not easy to say what's wrong, but in your case I would test the RAM and HARD drive.

  There are special tools to test the following:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  http://Memtest86.com/

  On the two Web site, you can download a CD image. Burn it to a CD, start with him and then you can test parts.

  Good luck!

• Since I updated to Firefox 41.0 I get the message "Firefox does not" and the computer crashes. Does anyone else have this problem

  Th.is is very young in the last days I did the update and it started having the problem. Perhaps Mozillo may wish to review their last update. Before that, I've never had a problem

  I've upgraded to a new version of Firefox 41.1 when I received the message that he was available. The problem seemed to go away when I did.

• Activation problems and the computer crashes

  Original title: help

  I mean I used my pin code to activate my Microsoft, but frozen loading so it restarted and I returned it but he said he could not load because it has already been used! what I do and it says im on a trail and its going to expire

  Hi Jennifer,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, there are questions while activating.

  These problems may occur when you connect to the Internet through a proxy server where basic authentication is enabled.

  Perform the steps from the link below and see if it helps.

  Activation of Windows fails and may generate 0x8004FE33 error code

  Hope this information helps.

  Answer to us if you are having problems with the Activation of Windows or any other Windows problem, and we would be happy to help you.

  Good day!

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I don't remember my password and the computer won't let me use a password reset disk not a kno another way? __

  I don't remember my password and the computer wont let me reset disk. is - anyone kno a way?

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Mick Murphy - Microsoft partner

• how re vista windows install so lost the disk and the nly have export key sticker

  Pleading for help.  I bought a computer laptop esprimo Fujitsu three years ago. It came with the disc of instalastion for windows vista home.  I lost the disk and the pc fell and blamed the hard drive and lost all software including my windows original vista, it wouldn't start. one of my friends took for a guy who fixed and installed its own software for windows 7. Then I found when using its true not his and massage keeps poping up that is not authentic. Cannot get their hands on the guy. I can not even media player inst anythalling and even download updates everytime im online cannot be installed and when I followed the link he encourages me to buy a windows 7 for R702 and I only have the money. I was happy with my windows vista. so I got the info under the laptop computer product key it is to say but sctuffy and the serial number, now how do I reinstall my vista from this fake windows 7 oh please someone help please how can I get my rear my own window.

  See the instructions for the reinstallation of Windows Vista:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

• If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Type these commands in the start menu, run a dialog box:
  Here's how:
  a. Click Start.
  b. in the run box, type the following commands one by one and press to enter.

  regsvr32 dfrgsnap.dll
  regsvr32 dfrgui.dll
  
  Method 2.
  I. to resolve this problem, follow these steps:
  a. Click Start, run, type % Windir%\Inf, and then click OK.
  b. right-click the dfrg.inf file and then click on install.
  OR
  II. Alternatively, you can reinstall Disk Defragmenter using the following command:
  a. Click Start, run and type that the following command and press ENTER.
  Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.inf

  I hope this helps.

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• I have a mac and lightroom 3.6.  Never had trouble importing photos before. I tried today to import from memory card and my computer and the icon twice 'pending' appears and the program crashes. I have to force quit out of lightroom. It is o

  I have a mac and lightroom 3.6. I have never had bad to import photos before.  Today, whenever I try to import photos from a memory card or my computer, the icon "on hold" is displayed and the program crashes.  Only way out is to force the resignations of lightroom.  How can I fix this and why this is happening?

  Only, I solved the problem... My mac has updated the day before to a version that is not compatible with my old version of lightroom.  Only way to solve this situation is to buy the upgrade.

  Thank you very much!