RAM fills and the computer crashes, the rendering stops

Similar Questions

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram? And the Windows 7 Professional upgrade will solve this problem?

  Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram?  And the Windows 7 Professional upgrade will solve this problem?  Does anyone have this done successfully?

  Not all programs can use more memory, so if you have a problem you must specify what the problem is, with what program

• My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  Hi chbradshaw,

  Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

  Kind regards

  Nicos

• screen flickers and the game stops, and table appears all playing the cfs3 game

  Original title: cfs3 crashes to the desktop

  Hi, a friend gave me used fcs3. It installed fine, everything works fine, but after 30 to 60 minutes, the screen flickers and the game stops, and my table is displayed. I get no error message at all and I went topics in microsoft help for cfs3 specific website if overwrite problems cfs3, which there was a huge page full of symptoms and types of accident etc but since I got no error message number refer to I have read the whole search'm thiing and the causes and resolutions , but found nothing there.

  I tried to restart and the program should run for a while then crash and return to the table.

  I tried uninstalling and reinstalling, but I got the same results.

  HP a6110n

  AMD Athlon 64 x 2 Dual Core processor 4400 + 2.30 GHz

  RAM = 4.00 GB

  32-bit operating system

  Note Windows experience 4.9

  80% of my disk space is available.

  Also the power supply 450w

  Map of Envidea 8600

  Whole body there suggestions?

  Thank you, Ed S.

  Hi P.K.

  The information and links have been informative and educational and I'll save that for a later use. However, the graphics card was the problem (I discovered) so I'm upgrading and also I move FSX on my new pc (a pc gamer VELOCITY) and it works perfectly. Thanks again for your contribution.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  original title: local area connection problem

  Hello

  1. What is the exact problem you are facing with local connection?

  2. how many computers have you plugged into the network?

  Please provide the information of network event logs to help you best.

  Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  In the meantime, run the troubleshooter mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• When I'm looking online, I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.

  Hello

  I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.  I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank you
   
  Original title: help again...

  I have moved your question to area drivers & hardware.

  If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740

  Updated drivers can be made of:

  https://Downloadcenter.Intel.com/default.aspx

  Best bet may be to contact the vendor of PC.

  -steve

• Hello, I'm trying to download the trial version of photoshop and from first pro, and the download stops pour two applications to 42% (I tried to download photoshop then seen that Lydia I tried first but none of that works no pl)

  Hello I'm trying to download the trial version of photoshop and from first pro and the download stops at 42% to every time, what to do?

  See the link below:

  (Exit code: 34 please see specific errors below for troubleshooting.) For example, ERROR: - Summary - 1 or fatal errors, 0 FATAL error: "Microsoft Visual C++ 20 payload.

• When I start installation Creative Cloud App it starts for about 10 seconds and then initializing bar disappears and the download stops

  When I start installation Creative Cloud App, it starts in about 10 seconds, then the initializing bar disappears and the download stops, anyone have any ideas?

  Jennifer,

  Please try the steps listed in error: "unable to install". Creative Cloud Desktop to reinstall the creative Cloud Desktop application

  You can also see these links:

  Creative Cloud App Installer disappears after "initializing Setup" without having to download (Windows)

  Installer of creative cloud disappears  (Mac)

  Guinot

• Hello, during the installation of Adobe Creative cloud I shows me the error 1 and the download stops. How can I fix? I own Windos 7

  Hello, during the installation of Adobe Creative cloud I shows me the error 1 and the download stops. How can I fix? I own Windos 7

  Refer to this:

  Download cloud creative to troubleshoot and install questions

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Buffer of duplication and the rendering speed

  So, I got a call that I had to clean up because of conduct by some of the traffic.  I'm still new to different methods of removal of unwanted objects in a video, but in my case, it seemed that the tool suitable for use.  I have a total of 223 stroke of the clone stamp.  I used each by a unique setting, not constant so that it would not be a generation to the top of the data for each image.  But, it seems that no matter the method, just Clone Stamp slows down my system radically.  I don't have the overlay of the active source.  Is there a way to speed up the rendering or it's just the price of the use of clone stamp?

  System:

  CPU: AMD phenom II x 6 AMD processor

  Graphics card: Radeon HD 5770 1 GB

  Power: 750 Watts

  RAM: 16 GB DDR3 1600 Hz

  OS: Windows 7

  Adobe version: CS6 Master Collection

  Yes, this all get AE tools brush slow as molasses after awhile. Make an intermediate file and re-import them to continue the work, if things get unbearable with the first iteration...

  Mylenium

• Discoloration between the fill and the outline of an object

  I created an object and normally have very smooth lines. However, I noticed that this object has a slight discoloration between the border of the Fill and Stroke. The discoloration is a slight yellowish tint despite the stroke and fill being red + black.

  Is it possible to fix this? Included is a picture of the question with the sign of the appearance of the form (which was originally an ellipse before applying the Ark)

  Is this just anti-aliasing? If so, is there a reason why it is yellowish? If I can't solve this problem, it displays when printing?

  

  Guy,

  I think that it is the object of yellow background showing through. It should disappear if you uncheck the Anti-Aliasing, and it should not display.

• Blu Ray goes black and the sound stops periodically

  Hello. My Blu - Ray player is a BDP-S3100. When on the home screen, streaming Netflix and Pandora, listen to music and even watch movies, my screen will turn black and the noise will go away maybe 5 seconds before returning. It does this constantly. He started doing this recently, in the last few weeks. It is said there is an update of the network, but also, my Blu - Ray does not connect to my internet. It is said that there is no password on my internet, when there is. It tries to connect and fails each time. It seems that everytime I turn on my Blu - Ray it was disconnected from the internet. I don't have any idea what is happening with the Blu - Ray.

  Reset the unit to its default settings:

• Satellite 200-170-keyboard does not work and the keyboard stops working

  My U200-170 2.5 years, I have the following problem:

  When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

  Thank you

  AJAN

  Sounds like keyboard problem.
  The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
  But one thing is really strange; the yellow exclamation mark in Device Manager

  Eventually it s only a problem of software in such a case, a system restore can be useful...

  Have you checked if the keyboard works in the BIOS?
  Do this!

  If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.