Active Directory and the Source of data in Application Weblogic

Similar Questions

• Problem with Active Directory and the NAC

  Hello.

  Please I need help.

  I have my server with the "Active Directory SSO" began, but when a user tries to connect to the network with its credentials in Active Directory, the PC agent say that 'Invalid username and password.

  My server is tuned by the 8910 port.

  I conectivity with CBS and active directory.

  kpass command runs successfully.

  Thks.

  Jorge,

  If the service is running, then you must put emphasis on the communication client/AD and see where the break occurs.

  Can you ensure that the unauthenticated role, you have all the required TCP/UDP ports open, and ICMP and IP FRAGMENTS to all your domain controllers?

  HTH,

  Faisal

  --

  If you find this article useful, please note so that others can easily find the answer

• Problem with negative filters of refinement and the source of data on the OID 2.3

  Hello
  
  I have a problem using the filters of negative refinement on a data source with Information discovered 2.3
  
  Here is the configuration of data source
  
  {
  "baseFunctions":]
  {
  "attributeKey": "COMPANY"
  "attributeValue": "PROMO."
  'class': 'com.endeca.portal.data.functions.NegativeRefinementFilter '.
  },
  {
  'class': 'com.endeca.portal.data.functions.RecordFilter ',.
  'recordFilter': 'OR (OID_RECORD_TYPE:RES, OID_RECORD_TYPE:DEF).
  }
  ],
  "datastoreName": "datastorename",
  'name': 'ABC ',.
  "port": "7770."
  "Server": "XYZ".
  }
  
  When I reached a dashboard page where all the portlets using this data source, the record filter is applied as expected. However, for negative refinement filter, so that it appears in the portlet of the breadcrumb, it has no effect on the data set. Guided navigation always displays the value as a dimension as possible and I can see in my table of results as the data was not deleted by the negative refinement filter. I tried to restart Tomcat, without effect.
  If I go to the guided navigation and define negatively this value on the dimension of the COMPANY, the data gets filtered and I get 2 negative improvements will appear in the navigation bar to the same value (!)
  
  Is there something escapes me to configure negative refining filter?
  
  Thank you

  Your configuration is correct.

  I see two possible problems, but we are really just shooting in the dark:

  (1) "rogue whitespace.
  -If your value is not actually "PROMO" "PROMO", then your filter would not exclude anything. This would also explain why you might then add a negative refinement for the "real value". To validate this, use a browser with some debugging functions (i.e., Chrome), have your applied by default negative refinement and then "apply manually" in Studio.

  And then open the browser debug mode (chrome, right click on the value you just added and click 'Inspect element'). If all goes well, the HTML code will show a little differently, and you can see the white space in the manually added refinement.

  (2) it would happen to be a managed attribute? I think that the managed attribute values can have display names and real names and real name should be used for filtering purposes. I doubt that's the problem, but it's the only other thing I could think of...

  Kind regards

  Patrick Rafferty
  Branchbird

• ActiveSync with Active Directory and the custom search filter returns nothing

  Hello
  
  I use ActiveSync to update the Active Directory user accounts in the IDM repository.
  
  The search is based on the uSNChanged attribute to find the last modified accounts.
  
  I'm trying to set a search filter in my resource Active Directory synchronization strategy that is combined with the default
  
  I expect to see this filter on the balls
  (& (objectClass = user) (objectCategory = person) (myCustomAttribute = value) (uSNChanged > = 8003748))
  
  But Active Directory receive it:
  (& (objectClass = user) (objectCategory = person) (FALSE) (uSNChanged > = 8003748))
  
  If the query never returns from the objects.
  
  Can someone help me solve this problem?
  
  Thanks in advance
  
  Edited by: user1657029 Apr 23. 2013 15:52

  Problem solved. My custom attribute was not on the global catalog in Active Directory

• Installation of Active Directory and the reconciliation

  Hello world
  
  I want to install Active Directory as target resource.
  I've implemented server connector according to \activedirectory-11.1.1.5.0\documentation\oim\ActiveDirectory_guide.pdf
  I put the key.
  
  Once all operations of installation, I tried to recon research group.
  But an error occurred:
  
  oracle.iam.connectors.icfcommon.exceptions.IntegrationException: connector ConnectorKey (connectorName bundleName = ActiveDirectory.Connector bundleVersion = 1.1.0.6380 = Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector) not found.
  
  
  Thank you.
  Best regards.

  Is the connector server is running, you copied in pots on the connector as suggested in the document server

• How to change the source of data in application with the deployment plan

  Hello

  JDev Version: 12.1.3

  I can't change the source data with the deployment plan bc4j.

  Any example on this requirement?

  Thank you

  Anil

  Well, if you take a look at:

  http://Biemond.blogspot.com/2009/04/using-WebLogic-deployment-plan-to.html

  (one of the links in the link you get), you will see Edvin Biemond answwer:

  "you must change the configuration of module of the Application so that it uses a data source. and in the deployment of applications disable deployment of jdbc connection.

  Now you is enough to make the good source of data on each wls and deploy ears. »

  The simplest (and probably the best) way is, as I told you, and you are also mentioned: open up JDeveloper and change declaratively and re-download the ears

• Active Directory and domain controller on old customer Windows 2003 and Windows 7.

  Hi all

  I have Active Directory and the domain on old Windows 2003 and Windows 7 client controller. I enabled "User must change password at the next logon" for the customer user on AD account.

  When the user tried to connect to Windows 7, after that they have got the change password screen and type new password, then they received message "the user password must be changed before logging on the first time," user get password screen change again, then they get the same massage. Looks like he's going to loop and user cannot change password and connect to the computer.

  Hello

  To help you with your concerns, you can see the article below:

  Error message: the password must be changed before logging on the first time

  Let us know how it goes.

• What is the source of data 11.1.2?

  Hello
  
  What is the source of data 11.1.2? without the help of ODBC drivers how to connect to the back-end database. I need the flow for that.
  
  
  Thank you
  PC

  Hello

  I answered a similar question here > what is the data source 9.3.1? Is OLEDB supports ODBC
  If you didn't even answer or bother to mark it.

  Data source connections are driven by JDBC to communicate with the repository database and a JAVA API to communicate with essbase.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What is the source of data 9.3.1? Is OLEDB supports ODBC

  Please someone make me know
  What is the source of data hyperion 9.3.1
  and is OLE DB takes ODBC support
  In hyperion 11 the data source is through ODBC.
  
  
  
  Thank you

  Hello

  The data source in 9.3 / 11 is stored in the tables of planning system database
  In 9.3 it is implemented through the configuration utility, in 11 it's done directly through planning web.

  The data source may contain connection details standards of planning and essbase application.
  The data source connects to the repository planning through JDBC and essbase using a JAVA API.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I have a G4 and the transfer of data to an I mac?

  I have a G4 and the transfer of data to an I mac? There is no port Firewire on the Imac A1418

  Use a FireWire 800 adapter Thunderbolt and if necessary, an adapter FireWire 400 and 800. If you wish, you can use a network or external drive instead.

  (142220)

• Dynamically change the Format of Date of Application

  Hi all

  I am looking for a possibility to change the format of date of Application in globalization attributes dynamically according to the user.

  Something likeAPEX_UTIL.SET_SESSION_TIME_ZONE but for the date format.

  Does anybody know how it works?

  In detail:

  I want dates in interactive reports display in a specific date format.

  If I put the following in the attributes of 'security' - call the virtual private database PL/SQL to define the security context:

  BEGIN

  If password = "MY_TEST_USER" then

  run immediately "alter session set nls_calendar =" English Hijrah "';"

  run immediately "alter session set nls_date_format =" DD-MM-YYYY "';"

  end if;

  END;

  Then, the dates are indicated correctly in reports interactive but not in the Action menu-> filter.

  If I put date_format = "DD-MM-YYYY" in the attributes of the globalization, it works very well in the interactive report filter.

  The problem is that I want to set this attribute only for some users.

  Thank's,

  Kirsten


  (APEX 4.0/APEX 4.2)

  Because you can use string syntax of substitution for the attributes of the globalization, for example, you could create an element of the AI_DATE_FORMAT application, reference & AI_DATE_FORMAT. and fill out the application element according to certain parameters in the code after the authentication of the authentication system (for example: get a parameter of an array of parameters user or somesuch).

• How can I dynamically change the Format of Date of Application?

  Hello world...
  
  In my application (v 3.2) I let the user set the date format of app dynamically by a "preference" value, they can change on the road.
  I then take the format they take and affect their value (ie: ME-DD-YYYY) and pad "Hh: mi" for it and use it as the PICK_DATE_FORMAT_MASK that works very well for most of the selectors of dates.
  
  The problem I have is that some date picker, I use the application does not require the hh: mi, they need just the part of ME-DD-YYYY. I could use the NLS_DATE_FORMAT for this? I may be able to use the selectors of dates with the "format of date of application use? It doesn't seem to work for me.
  
  In other words, I need essentially 2 date formats for my selectors of application dates; 1 for just the dates and 1 for dates, including time. And these 2 formats are selected by the user by setting a preference of app dynamically at run time.
  
  Not sure if I feel here... any idea?
  
  Thank you!
  François

  You must use the element of the application in the installation of your application, so when you select in your control, you would use the date format of application level. You can change the level application through code or control element.

  Thank you

  Tony Miller
  Webster, TX

• How to get the active directory and environment variables

  Hello

  1 - is there a global variable to get the real (project, where is ORD and DSQ files) directory?

  2.-y there a way to get the directory of the user as the reading of the operating system environment variables?

  Thanks in advance.

  PD: I use Dasylab12

  Yes, use ropes of system

  For example, ${DATA_FOLDER}.

  For a list, the simplest method is to right click and select global chains. The lower half of the dialog box lists the system strings, including the date, time, name of the worksheet, with or without a path, the DEFAULT folders for the spreadsheet, data, other, black box, etc.

  

• To an existing dashboard, how can I go back and discovers the source of data for the items in the dashboard? More precisely to determine why the data not displaying on the dashboard for a host where the agents seem to work fine.

  Here are the servers in the cluster.  The active cluster in the attached image is PrdERx2.  The zeros should have a count associated with them equal to zero.

  Thank you

  Barry

  Hi Barry -.

  If the dashboard in question was created with WCF (our Framework Web component that is included with the product), then using the tab design inspecting dashboard design suggested Bart is a good. WCF dashboard get much of their data by querying the Foglight data model so once you are in the editor of WCF, change views to queries drop-down list and see what queries can exist in this module WCF. Test if you find to make sure they return data. Also change the functions drop-down list and see if you can test as well.

  I hope this helps.

  Robert

• RMAN duplicate for standby the active database and the missing data files

  We have a car of 2 node ASM 11 GR 2 and 11.1 of database and a standby with ASM also. Our database is relatively low (300 GB)

  and in one recent event the day before was such a departure from the primary that we decided to "repopulate" the data using duplicate RMAN.

  I deleted the data files of the previous day and followed the Oracle documentation to duplicate a database. In the waiting

  I created a static listener and a pfile containing only the essential information (db_unique_name). I started the day before with nomount using the 'empty' pfile.

  I run RMAN, connected to the target and ancillary catalogues and run this command:

  run {
  allocate channel prmy1 type disk;
  allocate channel prmy2 type disk;
  allocate channel prmy3 type disk;
  allocate channel prmy4 type disk;
  allocate channel prmy5 type disk;
  allocate auxiliary channel stby1 type disk;
  duplicate target database for standby from active database nofilenamecheck;
  }
  

  RMAN duplication completed without errors, so I started the rescue database and got

  an error saying that datafile XXX is missing. I checked XXX datafile at the primary level

  and it is in a DISCONNECTED state. In the standby database the same data file is in the online state.

  So I think the problem is that during the duplication, RMAN (as documentation States) does not work

  Copy the files of data in offline mode, but the standby control file seem to think that these data files

  are online and should be present.

  Can someone please help me solve this problem? From my understanding, I could just copy the missing persons

  data files (there are many however) and in the standby go offline, but I don't think it's

  the right solution, edit this file for control of the standby? I would add another option

  in the RMAN script?

  Take the data file in offline mode on the site of the previous day.

  I don't think that two COPIES try to manage separately offline files.

  Hemant K Collette