Active Fabric Manager for small deployments.

Similar Questions

• License Manager for applications built in LabVIEW

  What I have is a licensing system to add to applications built in LabVIEW that works more or less like a volume, or as FlexLM license server, where a customer is allowed to so many instances/seats of a program.  Most of what I found looking around my own has been for licenses Add-ons for LabVIEW, which is not what I'm looking for (it's what makes third-party attribution license and activation tool box, for example).  I want it to work like saying the CAD program to work - we have X licenses to run SolidWorks, so when someone starts the program, it fist check with the license server to see if a license is available.  If so, the application opens, and then withdraw the license when the app is left.

  I found Protection PLUS 5 of SoftwareKey SDK.  It looks pretty good.  I like that they have a licensed server product that manages the whole "set up a license server" for me.  I think that some (or a lot) of work, this could be useful.

  The problem I have with the product is that it's a terrible LabVIEW library.  It is not to add to the palette of features anywhere.  Not one of the screws included have a description.  They don't follow things to standard LabVIEW style, like the error code from the lower left and the lower right (actually go in and out of the top middle).  They have an online site that lists what each command and how it works, but it's a pain to work looking back from a webpage to LabVIEW.  The only example they included is a little obtuse.

  So I guess I have two questions.  The first is, has anyone used 5 over Protection, and what did you think of him?  The second is, is there an another add-on which recommend you people?

  Oh, just remembered, but I don't know if it has this feature - http://sine.ni.com/nips/cds/view/p/lang/en/nid/211731

• Installation of the Active Directory Management Gateway Service

  Help!

  I tried to install this on one of my Dc Windows 2003 Service Pack 2, Dot Net 3.51 and the necessary of KB. I desperately need the cumulative hotfix package that is mentioned in this article (https://support.microsoft.com/en-gb/kb/969166), so I can complete the installation. I desperately need this and sent by e-mail to Microsoft, but don't think I'll hear in the necessary time scale. I could cure it by installing dot net 4, but the company will not authorize the change this year. I wrote a powershell scripts to automate migration and don't have the time or skills to do it again in VB by Monday, any help gratefully received

  I get the following error message-question

  When you try to install the Active Directory Management Gateway service, the installation fails with the error "update does not apply to your system".

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Reference Dell Open manage for PE2950 for WS2012R2

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  I know it's there because I installed it in the last company I did part of the management, but for the life of me, only two years later, I can not understand where we got the original installation to do this.

  I downloaded installed three or four to manage open on the page drivers for our service number, but one of them came with "[I'm just a patch]" and the other three have indicated that they were not compatible. Even if we set the operating system to Windows Server 2012 R2, it always gives me "for 32-bit node,' then maybe we're missing something else.

  I am hoping to win the lottery here and have a Dell technician take pity on me and direct me to a FTP location I can give to my manager so that we can get this software down to all the systems in our network.

  I can't be the only person who has faced this issue, but I may be the only person who was not able to fix it on their own.

  Help, please.

  daveepperson86

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  Fake. You will find it at support.Dell.com, select your system, change the selection in the drop-down list of OS, then check out managing systems for OpenManage Server Administrator (Managed Node). The 32-bit version is fine and installation of WoW 64-bit operating systems will be activated (all except the ' core' by default).

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V1JDD

  You can also go to http://ftp.dell.com.

• With Creative Cloud for small businesses, the number of users you get per license?

  We are seeking creative cloud and are interested in the "Complete" package for small businesses, but we don't know exactly how it works with licenses and users? How many users you get per license? Do we need 1 license per user?

  Hello

  The Adobe CC license is not specific to the user; It is specific to the Adobe Id, on which it was purchased.

  Adobe CC license can be activated on 2 machines using the same Adobe ID, but can be used only 1 at a time.

  Reference: licenses and terms of use | Adobe

  Visit the pricing and membership creative cloud plans | Adobe Creative Cloud for plans and prices.

  
  

  Kind regards

  Sheena

• Contact for Continua Bluetooth Manager for Windows window

  Hi all
  Could someone kindly provide information on "continued Bluetooth Manager for Windows? The original Web page is about Alliance health continued:

  http://www.continuaalliance.com/certified-products/Continua-Bluetooth-Manager-for-Windows-manufactured-by-Toshiba.html

  How to contact the related service about this product? I can't find information on the Web from TOSHIBA site.

  Thank you!

  Hello

  I don't very well if it could be useful or not, but here's a Toshiba BT m Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  There is an option called: maybe your comments, you can use this contact form to get comments on this theme

  Welcome them

• Windows 2000 version of the Power Manager for A75

  Hi all

  I installed Windows 2000 in an A75-S226, but I can't find a utility Power Manager for this OS. I tried the version of Windows XP, but as expected, it did not work.

  Is there someone else by using Windows 2000 with this model?

  Thank you

  Rubens

  Hello

  This unit has been designed and delivered in the U.S. market
  He was able to find a utility power for W2k on the site Web of Toshiba driver we.
  Please visit this link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlViewDL.jsp?soID=729833&MOID=713725&BV_Ses sionID=@@@0394886756.1138114313@@@&BV_EngineID=c ccfaddgkkelmigcgfkceghdgngdgmn.0 & ct = DL

  Good bye

• How do I make mesh for small Structures in the MWO?

  Hello

  I use Microwaveoffice AWR to simulate the electromagnetics of nanomecanique. The length of the nanomachanics unit was 1um and the minimum size of the structure was about 15 um. I made of mesh and simulated the circuit using the Solver AXIEM. However, the result was absurd - the width of the stripes of the parameter S12 are about 100 times larger than the experimental value. I discovered that the shape of the mesh was odd; as shown in Figure 1, the mesh did not reflect the shape of the circle and the Combs. So I think that the parameters of the mesh are mistaken. Could you please tell me how to mesh for small structure in MWO? And also I don't know what means the large rectangle in figure 1.

  Hello

  From the picture you attached, I agree that the mesh was too big to take account of combs, although I can't get a complete picture with just the image.  I recommend that you look at the grid X values and Y of the grid on the case.  They should be in the neighborhood of 20 percent of your smaller width of line as a rule.

  I hope this helps.

  Support of the AWR

• Need to disable the service manager for down load adobe

  Need to disable the Service Manager for down load adobe

  Original title: program compatibility Application Applications App Apps GaGames Legacy Crash crashes hang hangs
  Moved from feedback
  Internet Explorer version unspecified - unspecified BONES

  Hello

  What Adobe program you are trying to download?

  Flash Player
  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

  Adobe Reader
  http://helpx.Adobe.com/Acrobat/KB/quick-fix-install-download-reader.html

  Don

• Cannot access the options of color management for HP 6700 Mac OS 10.8.5 (Mountain Lion)

  Hello.

  I have the HP Officejet 6700 Premium e-all-in-one, and I can't find any way to access the color management options.

  The printer is attached (Wi - Fi) to my iMac Mac OS 10.8.5 (Mountain Lion).

  I want to correct a magenta cast for the photos I printed.  I had the problem of magenta-cast in Lightroom and use Preview to print the photos, so now I want to work with color profiles in Photoshop Elements.

  Photoshop Elements is recommended I have 'disable color management in the printer Preferences dialog box.

  However, I am not able to find for the 6700 color management preferences in settings under Mountain Lion:

  Not sub (Apple) > System Preferences > print & Scan.

  Not sub (HP utility) > Open Embedded Web Server.

  Not sub (HP utility) > the printer settings.

  Non-print preview dialog.

  I can't find any clear directions in the online help (HP or elsewhere) that I've read so far.

  Any suggestions would be most appreciated.

  Thank you!

  Michael

  Hello

  Thanks for the reply and the screen shot.

  The first thing I want to do you is to reset the printing system.
  OS X Mavericks: reset the printing system

  Then add the printer, however when it by adding not just click on the name of printers, click Add printer or a scanner. Make sure that the 'use' is set to the printer and not Airprint.
  If it is displayed as Airprint, you will be missing feautres compared to the actualy printers driver.

  After that, I'll provide you know several documents that you may find useful to perform this task.
  Documents from HP:
  Color management for the HP inkjet printing products new generation
  Advanced color management overview

  Apple documents:
  Mac OS X 10.6: edit images using ColorSync Utility
  Mac OS X v10.6: about ColorSync

  Document from CNET:
  How to use ColorSync Utility to assign color profiles in OS X

  I know some say 10.6, but they give you a reference and the idea, trying to do what you are.
  Please let me know if that helps.

• Backup and HP Recovery Manager for Windows 7

  I installed all the software and drivers that came with the HP upgrade DVD. But, I found that the Backup and Recovery Manager missing on DVD. Is there a Backup and Recovery Manager for Win 7? I liked the manager backup and restore that was available on my Vista, when I bought this laptop, but is currently unavailable due to upgrade! All the solutions for this? I don't want to use the default Windows Backup that I don't have a separate HARD disk for the time to store the backup here and do not want to fill up my hard drive with data backup! Thank you.

  Ok thank you. I have my recovery partition intact Vista. So I think, I should be able to recover if I have some kind of problem! I was able to find a backup and recover in Win 7 itself. Maybe I should wait for the software will be released by HP. Thank you once again!

• Free download Acer eRecovery Management for win 7 please!

  Free download Acer eRecovery Management for win 7 please!

  Hello

  I agree it would be nice.

  Concerning

  George

• Error 1310 installing Seagate manager (for external HDD)

  I try to install Seagate manager (for external hard drive), but I get the following error

  "Error 1310.Error writing to file C:\Program Files\Seagate\SeagateManager\iconfiles\BlackArmor\autorun.inf. Make sure you have access to this directory.

  If I ignore this error then then following error

  "Error writing to the file C:\Program Files\Seagate\SeagateManager\iconfiles\BlackArmor\BlackArmor.ico 1304.Error."

  If I cancel the installation after the second error then comes the final error.

  "Error 1603 Fatal error during installation. "Consult Windows help install (Msi.chm) or MSDN for more information.

  Hello

  Some applications or services may cause these error messages. Services are specialized programs that perform functions to support other programs. Disable other applications, including startup items (items that start automatically with Windows) and services by performing a clean boot on your computer. This helps identify the third-party software that is causing the problem to occur.
   
  Note: Follow the steps in the article to restart your computer in normal mode.

• Windows mail the filler of unique active automatic name for a day or two after the last contact with the person.

  Windows mail. Filling of unique active automatic name for a day or two after the last contact with the person. After that, I have to manual search in contacts. Is this normal?

  Thanks in advance

  Hi Abbeypiece Ltd,

  The feature of AutoComplete in Windows Mail doesn't seem to use the Contacts folder. Instead, he uses the history of most recently used contacts.

  For more information, you can consult the following article:

  Change Windows Mail send settings

  Hope this information is useful.

• eMachines Recovery Management for ET1161 Windows Vista does not

  eMachines Recovery Management for ET1161 does not, I have Vista Home Basic

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://www.eMachines.com/