Active forms, groups, buttons

Similar Questions

• Making an active form a button will pause not slide

  Hello.

  I'm not sure what I'm doing wrong but when I use a smartshape as a button (I select use as a button box), the slide does not stop as it does when I insert a button.  Any thoughts on what I am doing wrong?

  Thank you

  The f

  Hello Jeff,.

  Maybe this post will provide you with more details, will explain soon: http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6

  The normal buttons pause to 1.5secs by default, and you can uncheck the break, change the "timing" in the properties, timing Accordion Panel.

  Keep form buttons by default. You must check the break in the accordion of timing:

  

  But they have many more advantages, as you can see in this screen shot, they can appear to the rest of the project, which is impossible with any other interactive object.

• Active forms as buttons

  In Captivate 7, I used smart shapes for all my buttons, and the branching view looks right. Each of the forms is marked to be used as a button, but the blades do not stop. At the end of each slide, he continues as if there are no buttons. Am I missing a setting in the properties?

  Look in the accordion break after synchronization setting.  Do you have this selected or not?

• Where are all the active forms of Cp8

  Are the active forms of the Cp7 Cp8 gone or is there a way to (re) load?

  They are still there, but it's a little confusing because they are not all in the same place. The group you see under the BBB (Big Button Bar) "Forms" is only a "types". Once you have selected one of these types, you have more choice in the properties panel, Styles tab, under the "Basic" accordion

• Smart form withdrawal button problem (it is not so cold)

  Would be useful if someone has a solution for me, but I think it's more a problem with Captivate Smart forms in general.

  I like to use active forms in the form of buttons especially now you can have different States for the normal, over and down. The problem is that the active forms when used as buttons shrink, which in some respects is good because it gives the user some type of visual feedback of interactivity and I think that it is the intention then Smart forms as buttons have been introduced. But here's the problem, if you place your cursor on the edge of the button shape and click shape retracts and is no longer under the cursor. When you release your mouse button does not trigger any action that was attached to this button

  I'd be happy for someone to report a quick fix that I am missing but I have not found all the messages about the present. This problem makes me see again my principles of interface design when you use Adobe Captivate and active forms in the form of buttons to make sure that the user clicks in the active area of the Smart button shape. We are talking only about 5 pixels, I think, but if you have effects such as glows and shadows on the button and then visually you give the user more opportunity to meet this problem.

  Any whoooo, if someone can tell me, «oh, you just need to click on this option...» "and hey presto no shrink more so GRAND and I apologize for this rambling post

  AndyK

  Hi Rod,

  Yes, it was one of my first thoughts, but I quickly discovered that although the new States are great, they are still very limited in this first version of new feature and you can affect only the background and outline of shape, what got me thinking and found a workaround.  It won't work if you don't have a stroke that is already applied to your shape and you use a fill sold.

  First, I added a line of px 1 to the normal state of the smart shape and it's the same color as my filling. Then I activated the idle state and added a px race 4 of the same color.  "Hey Presto" it worked and the smart shape does not decrease at all.

  You MUST have a stroke, applied to a Normal State to work properly, or any size you do the low width of line of State, it will not increase in size correctly. Strangely, it has increased only very slightly and only about 2 px regardless of what size you defined in your inactive state.

  So that kind of works, but unfortunately I used a random variable of different smart shape using images, gradients and colors buttons different diseases. Close, but no cigar.

• How to move the top of the screen (active form)

  Hi all

  How to move the top of the screen (active form),

  Suppose I have 5 screens in the battery, I want to make the screen at the bottom of the stack as Active (top screen) without pushing and poping

  Of the display is a battery.  To move round on screens requires push and pop, as it would to move items in a stack.  Sorry, if you want to see the screen that currently is the bottom of the stack, then you either have everything that is above him, the pop or pop and push up.

  But here, we are talking about instances of the screen, not the specific screen class.  To understand the difference here is an example.

  I have two screens in my application, a list screen and a detail screen.  My application starts with the list screen.  The user selects an item (X) and displays details on the subject using the details screen.  While displaying the detail, the user decides that he wants to see a different list.  So, we start a new instance of the list screen, showing a different list.  Then, the user decides to view some details of one of the items on the list (Y) and if the application displays a new instance of the details screen.

  So now that the user has 4 screens on the display stack.  The top of the screen is a detail showing the item detail screen, the screen below is an example of the display of the list, the screen under that is another detail screen, showing the point X this time, and under that is a list screen.

  Does that help?

• Administrator rights to the ACS using Active Directory groups

  Good afternoon

  We must be able to use administrative accounts for our device ACS who reside in an Active Directory group, if possible.  If this is not possible, what other safer options would we be able to use (RADIUS authentication or authentication RSA 2)?

  Thanks in advance

  You can only use the locally stored accounts within the ACS.

• Active Directory groups can be put into service in the FDMEE places?

  Hi experts FeeDMEE:

  We are upgrading to HFM/FDMEE 11.1.2.4.    We would like to use only the Active Directory groups for our security in Shared Services.

  I did a lot of audit looking at whether we can use security location FDMEE ad groups.  So far, the only way I found to make the security location uses the native approach (settings / security settings / security location...) Security by location, click on keep usergroup to set up groups).    But it doesn't seem to be an option if you create groups such as native or ad groups (FDMEE them creates only natively).

  Does anyone know if it is possible in FDMEE to use security of the location ad groups?

  Thank you
  Mark Smith

  I discovered that it is more possible for FDMEE create Aboriginal groups for the security of the location.

  However, Active Directory groups can be added as members of indigenous groups.   In this way, users should only be added to Active Directory groups.    The only maintenance is to add or remove groups active directory to or from the indigenous groups of FDMEE.

• Active form

  guys, I use the following code to set the focus on the active form, but it was not established active as when I click on another painting, he went back to the other form, while it must be active and can not go back. something wrong with my code? I try the code but none of them below highlight the active household.

  IM using FORM 10 G.

    IF :MENUS.MENU_NAME='Employees' THEN
    OPEN_FORM('NEW_EMPLOYEE',ACTIVATE,NO_SESSION);
    END IF;
  
    IF :MENUS.MENU_NAME='Employees' THEN
    OPEN_FORM('NEW_EMPLOYEE',ACTIVATE,SESSION);
    END IF;
  
  

  Concerning

  >... but it was not established, active as when I click on another painting, he would come back to the other form...

  ACTIVATE in OPEN_FORM sets the focus to the form opened to make it the active form, but you can come back in another form.

  >... so what it must be active and may not go back.

  Use the modal property of the window (the value "Yes"):

  "Specifies whether a window to be modal. Modal windows require an end user to close the window before any further intervention by the user can continue. »

  Concerning

• Portal administrators from Active Directory groups

  I want to add additional users with the status of "admin", so that more people can use the "Admin Console". I want to do this using Active Directory groups.

  Can anyone say if this is possible and how?

  
  

  Maybe it's in the documentation, but I couldn't find it.

  For now, it is not possible to assign the Admin role to a group of users. However, you can promote individual users to the Administrator role. You can search for a user name and click on the user name to view the details of a user. On the left side, you will see a role (s) and the 'User' text is clickable. When you click on that text you will be able to change the role.

• Form Reset button does not

  http://www.metrobham.org/register.html "Reset the form!" button does not reset?

  Spirit never answered my own question! I have had the form tag.

• Closing the PDF form on button click

  Hi all

  Is there any command/code to close the PDF form on button click event.

  Thanks and regards-

  Chalukya.

  Hi Chalukya,

  This will close the PDF form, but not the application (Acrobat/Reader):

  app.execMenuItem("Close");
  

  Good luck

  Niall

• active forms not working do not like button

  I have a simple swipe with some smart shapes used as objects. I used the function jump into the Action of the tab do, but when I check that nothing happens when I click on the buttons. Can someone please help?

  Hello

  Are your smart forms buttons work with other actions like show/hide, etc.

  Do you have the question slides in your project and trying to jump between slides of questions or outside the question slides.

  Please check your preferences-> Quiz-> required-> dropdown settings.

  Kind regards

  Alexis

• Registration form - deactivation / activation of a button of validation

  Hi guys,.
  
  I'm looking for help with a groovy expression. In fact, I have two questions to do with this...
  
  Question 1:
  
  I use a header AF (panelHeader) Panel at the top of a form of Panel with text entries.
  
  After a method call is assigned to a command button, I'm back a result indicating success or failure. #{bindings.return1.inputValue}
  
  If this value is set to 'Y', I was able to use this to render a particular region, by putting a phrase in the rendered property.
  
  However, how can I change this, so that I can change the Type of Message property? #{bindings.return1.inputValue? == 'Y' |} then Type Message = "Confirmation".
  
  I tried several iterations and have included a PPR, but can't seem to get this to work?

  #{PageFlowScope.firstValue! = null and PageFlowScope.secondValue! = null and PageFlowScope.thirdValue! = null}

• Copy of forms radio buttons

  I have a several page form that contains two text fields, and radio buttons.  The fixed text in multiple pages is different on each page, but the data on the first page in the text and radio button fields need to copy in the identical text fields, and radio buttons on every page.  Text fields are no problem, but how I do on the 2nd radio button entries and the following pages copy the entries on the first page?

  First of all, I moved your question to the forum of Acrobat PDF forms .

  To do that right click on one of the radio buttons in the Group and select Properties. Then, on the Options tab, check the box that says 'the buttons with the same name and the choices are selected in unison. You can select several fields at the same time and apply to each of them, too.