Active tag: children
Hi all
I am currently working on a CMS structure built by another supplier where they were associated with children in the page. Now, I need to know how they have associated with these children.
When I checked the page definition, these attributes are not there, but they use label to fetch those.
< list asset: children = "recoList' assetid =' < % = ics. GetVar ("cid") % > ' type =' < % = ics. GetVar ("c") % > ' code = "latestProducts" / >
Any body can tell me how it works and how can I associate more similar products to him.
Kind regards
Nelash Jindal
You can have link with any type of asset: go to Admin-> Admin-> asset Types tab-> select any type of active-> Associations but is rarely used and is according to the requirement.
The code that you shared is named Association. To delete page groups, you must first manually or programmatically remove associations of assets of the page. Then go into the Admin tab-> asset-> Page-> Associations Asset Types and remove the association - latestProducts. You must then create attribute page and update each asset of the page with the attribute values.
But I recommend if there are many advantages with this association page, it is best to keep the association with the assets of the Page to avoid too much work.
Kind regards
Guddu
Tags: Fusion Middleware
Similar Questions
-
ThinkStation S20 - add an active tag in the BIOS
Y does it have that a utility available to we can update the number of assets in the BIOS? I found one for Thinkpad laptops, but not for the thinkstation s20...
for laptops I've used
http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-75237
Thank you
My colleague figured this out...
We have been able to use the winplash utility to update the identification sticker
He had to put the tag in the "serial number" field and change the update mode "bios update and preserve the DMI.
He also mentioned that the method flash2.exe than psuturtle should work too
-
The family safety activity log shows no data for Facebook
Original title: Family Safety + Chrome + Facebook
The latest version of Live Essentials is installed on Windows 7
Parental controls will not register the Chrome Facebook activity.I see in the activity that children use, for example, 0.5 hours of chrome, but there is no granular information.My daughter spent 2 hours on Facebook and the Family Safety activity log shows no data to Facebook.The computer is a new installation of Windows 7Live essentials have been installed yesterday.All web links for accounts for children have been created yesterdayDoes anyone have a suggestion on how to see real activity?Also, before someone suggests using another browser, is not an option, IE is uninstalled.Chrome is the only browser used because of all the android devices, we have.Thank youClient Windows Live Family Safety currently not reported HTTPS traffic unless the web of the child, filtering mode is set to "notify on the adult. Facebook who worked in HTTP mode has recently moved that the HTTPS site and that's the reason to not see, Facebook or any other site that is HTTPS in the progress report on Windows 7 machines.
It is resolved in Windows 8 and activity reports should show HTTPS traffic.
Current work around that for Windows 7 client
-Set the mode of web filtering to ' warn on adult "- child will receive a warning message if they go to all the adult sites and the parents will be informed in the annual report if the child decides to go to the site.
Sorry for the inconvenience.
Thank you
Shankar
-
4.5 - sp3/thinpro 4.3.2 HPDM value inventory number hostname?
Hello
I'm looking to deploy about 1,000 of T610 in my mid-Q1 envinronment next year, and I'm buzzing on the configuration and management.
(By the bug, or design), I noticed that if you set the host name and the picture of the machine, it will return to the default HP$ macaddress. We rely on the Constitution of the active tag field in bios for a real barcode sticker that is stuck outside the box. Then we use this number to the brand as a host name.
What I want to know is - what if someone found a way to validate set the host name to the value of tag located in the Bios? I know that the agent can see the value because it signals in the console HPDM.
I feel I'm missing something vital.
Thanks for your help!
If the last command in the part of the script for the task of files and the registry looks like this...
If ["$(hostname-s)"! = "$(dmidecode-s plinthe-atout-tag)"]; then
/ usr/sbin/hpdmmc define the network hostname = "$(dmidecode-s plinthe-atout-tag)";
FIWorks fairly well.
If anyone is interested...
-
T610, how to maintain existing hostname after re-imaging?
HI people,
I have sp3 HPDM 4.5.
image of T610 ThinPro 4.3 current (T6X43202)
Updated agent 4.5.3668.17625
As soon as I have a camera HPDM, up to now, things I've tried, work as it should, as far as I can tell.
I can capture and deploy settings and pictures, devices of reset, rename, etc.
However, when I deploy an image (to recreate the image), the host name of the device reverts to the string of HP - default $Mac.
I can then go back into HPDM, send a task Hostname/IP and that works very well,
How to avoid this to 1000 customers that has host name is based on an active tag ID?
What I understand from the documentation, it is supposed to keep the hostname after her recreate the image. am I missing a checkbox somewhere?
It worked with a more elegent solution more.
As part of the implementation of the machine for the first start, reproduce us a set of bios settings and set the active tag field.
then, with the instructions in the link above, run this command, and it will be re-hostname of the machine with everything that is in the active tag field in bios...
Tested on ThinPro, 4.3.2. not sure if it would work for other versions...
Kind regards
-
List of Dell customers has been violated
I started receiving calls from technical support to Dell Fake. I also have never operated in my active tags to my pc or tablet... These labels are owned only by Dell and associate them with my mobile phone which is not listed as either, anywhere is kind of scary... I think that Dell needs to strengthen their security because this is ridiculous and should be inform visitors of their violation. They call my cell and tell me that there is something wrong with my pc and read me the inventory number, and then a few days later they would call and wonder about my tablet as well. Person not but Dell has this information...
Read this and use the secure Web page or the toll-free number to report to Dell.
-
EMC Ex3 - 40f, Qlogic ISP 2432 and RHEL 4 x86_64
I have a blade of 1855 w / daughter CF card. The OS is RHEL AS 4 update 5 x86_64. I recently installed this OS and have it connected to an EMC3 40f, which presents this host w / 100GB RAID5 LUN. First of all, I did this: (orders in "BOLD", released in BLUE)
1. register with RHN
2 up2date rpm-build redhat-config-RPM
3. up2date - get-source kernel
4. rpm-ivh /var/spool/up2date/kernel*.src.rpm
5. cd/usr/src/redhat/SPECS
6 rpmbuild - bp - target = x86_64 kernel - 2.6.spec
7. cp-a /usr/src/redhat/BUILD/kernel-2.6.9/linux-2.6.9/usr/src
8. ln-s /usr/src/linux-2.6.9 usr
The steps above were made so that these steps should compile without any problem
9 tar - xvf qla2xxx - v8.01.00 - 3dkms.tar.gz
10. rpm-ivh dkms - 2.0.5 - 1.noarch.rpm
11 rpm - ivh qla2xxx - v8.01.00 - 3dkms.noarch.rpm
Step 11 will produce the following:
Preparing... ########################################### [100%]
1:qla2xxx ########################################### [100%]Create a symbolic link /var/lib/dkms/qla2xxx/v8.01.00/source->
/usr/src/qla2xxx-V8.01.00DKMS: Add Completed.
Construction of module to the kernel running has been ignored since the
for this kernel kernel sources does not appear to be installed.Hmm... I thought that I just added the CBC core following steps 1 through 8. These steps are listed here: http://kbase.redhat.com/faq/FAQ_85_5109.shtm
I also installed the EMCPower. Linux - 5.0.0 - 157.rhel.x86_64.rpm under the default location. It has now SANsurferCLI and SANsurfer (gui).
When I rebooted the machine, I see dmesg:
HBA QLogic Fibre Channel adapter driver
ACPI: PCI Interrupt 0000:02:00.0 -> GSI 16 (level, low)-> IRQ 169
qla2400 0000:02:00.0: found an ISP2432, irq 169, the iobase 0xffffff0000014000
qla2400 0000:02:00.0: PCI configuration space...
PCI: The timer setting of latency of the device 0000:02:00.0 to 64
qla2400 0000:02:00.0: NVRAM configuration settings...
qla2400 0000:02:00.0: audit loaded RISC code...
qla2400 0000:02:00.0: allocated (1061 KB) to dump the firmware...
qla2400 0000:02:00.0: waiting for LIP finish...
qla2400 0000:02:00.0: LIP reset occurred (f7f7).
qla2400 0000:02:00.0: LOOP UP detected (2 Gbps).
qla2400 0000:02:00.0: topology - (F_Port), loop 0 host address 0 x
SCSI1: qla2xxx
qla2400 0000:02:00.0:
Adapter HBA QLogic Fibre Channel driver: 8.01.04 - d8
QLogic QME2462 - Dell B S PCI-Express to 4Gb FC Dual Channel
ISP2432: PCIe (2.5 Gb/s x 4) @ 0000:02:00.0 hdma + host # 1, fw = 4.00.23 =
Seller: DGC model: LUNZ Rev: 0324
Type: Access Direct ANSI SCSI Revision: 04
qla2400 0000:02:00.0: scsi(1:0:0:0): activated tagged depth of queue lines, 32.
SDB: READ CAPACITY failed.
SDB: State = 1, message = 00, host = 0, driver = 08
Current SD: sense key illegal request
Additional detection: logical unit not supported
SDB: asking cached data failed
SDB: assuming drive cache: write through
SDB: READ CAPACITY failed.
SDB: State = 1, message = 00, host = 0, driver = 08
Current SD: sense key illegal request
Additional detection: logical unit not supported
SDB: asking cached data failed
SDB: assuming drive cache: write through
SDB:end_request: i/o error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
end_request: i/o error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
end_request: i/o error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
Failed to read the partition table
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Seller: DGC model: LUNZ Rev: 0324
Type: Access Direct ANSI SCSI Revision: 04
qla2400 0000:02:00.0: scsi(1:0:1:0): activated tagged depth of queue lines, 32.
SDC: READ CAPACITY failed.
SDC: State = 1, message = 00, host = 0, driver = 08
Current SD: sense key illegal request
Additional detection: logical unit not supported
SDC: asking cached data failed
SDC: assuming drive cache: write through
SDC: READ CAPACITY failed.
SDC: State = 1, message = 00, host = 0, driver = 08
Current SD: sense key illegal request
Additional detection: logical unit not supported
SDC: asking cached data failed
SDC: assuming drive cache: write through
SDC:end_request: error e/s, dev SDC, sector 0
Buffer I/O error on device DSC, logical block 0
end_request: error e/s, dev SDC, sector 0
Buffer I/O error on device DSC, logical block 0
end_request: error e/s, dev SDC, sector 0
Buffer I/O error on device DSC, logical block 0
Failed to read the partition table
Attached scsi disk SDC at scsi1, channel 0, id 1, lun 0
Attached scsi generic sg3 at scsi1, id 1, channel 0, lun 0, type 0
ACPI: PCI Interrupt 0000:02:00.1 -> 17 of GSI (low)-> IRQ 193
qla2400 0000:02:00.1: found an ISP2432, irq 193, the iobase 0xffffff0000016000
qla2400 0000:02:00.1: PCI configuration space...
PCI: The timer setting of latency of the device 0000:02:00.1 to 64
qla2400 0000:02:00.1: NVRAM configuration settings...
qla2400 0000:02:00.1: audit loaded RISC code...
qla2400 0000:02:00.1: allocated (1061 KB) to dump the firmware...
qla2400 0000:02:00.1: waiting for LIP finish...
qla2400 0000:02:00.1: cable is disconnected...
SCSI2: qla2xxx
qla2400 0000:02:00.1:
Adapter HBA QLogic Fibre Channel driver: 8.01.04 - d8
QLogic QME2462 - Dell B S PCI-Express to 4Gb FC Dual Channel
ISP2432: PCIe (2.5 Gb/s x 4) @ 0000:02:00.1 hdma + host # 2, fw = 4.00.23 =
Insert the floppy driver for 2.6.9 - 55.ELsmp
Floppy drive (s): fd0 is 1.44 M
floppy0: not found floppy disk controllerHowever, when I run the SANsurferCLI, it shows no. HBA connected. I cannot fdisk the LUN. I get:
[root@xxx ~] # fdisk/dev/sdb
Unable to read/dev/sdb
[root@xxx ~] # mkfs - v-j/dev/sdb
mke2fs 1.35 (February 28, 2004)
/ dev/sdb whole device, is not just a partition.
Still? (y, n) y
WARNING: could not delete sector 2: try to write the file system blocks resulted in brief writing
Filesystem label =.
OS type: Linux
Block size = 4096 (log = 2)
Fragment size = 4096 (log = 2)
131072 inodes, 262144 blocks
13107 blocks (5.00%) reserved for the super user
First data block = 0
Maximum filesystem blocks = 268435456
8 groups of block
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840 229376WARNING: could not read block 0: try to read the file system block resulted in short read
WARNING: could not delete sector 0: try to write the file system blocks resulted in brief writing
Writing inode tables: fact
Creating the journal (8192 blocks): fact
Writing Superblocks and filesystem accounting information:
Attention, was struggling to write to superblocks.doneThis file system will be automatically checked all 38 media or
180 days, whichever comes first. Use tune2fs - c or-i to substitute.I expect that to happen. Included here for clues:
[root@xxx ~] # mount/dev/sdb/san/01 /
/ dev/sdb: input/output error
Mount: / dev/sdb: cannot read the superblockThe output of/proc/scsci/qla2xxx/1:
[root@xxx qla2xxx] # 1
QLogic PCI with Fibre Channel for QME2462 host adapter:
4.00.23 firmware version , Driver version 8.01.04 - d8
INTERNET SERVICE PROVIDER: ISP2432
Ask the queue = 0 x 215580000, queue response = 0x215d10000
Ask account queue = 4096, the response queue = 512 count
Total number of active orders = 0
Total number of interruptions = 12855
Device queue depth = 0 x 20
Number of entries free request = 3592
Number of time-outs of the mailbox = 0
Number of ISP abandons = 0
Number of the loop = 0 Resync
Number of retries for empty slots = 0
Number of requests in pending_q = 0, retry_q = 0, done_q = 0, scsi_retry_q = 0
Adapter: loop State host =, flags is 0x1e03
DPC flags = 0 x 4000000
Flags MBX = 0 x 0
Link down Timeout = 045
Port down retry = 045
Number of connection attempts = 045
Dropped orders retried with image (s) = 0
Product ID = 0000 0000 0000 0000The SCSI device information:
SCSI-qla0-adapter-node = 200000e08b9b8968;
SCSI-qla0-adapter-port = 210000e08b9b8968;
Qla0-SCSI-target - 0 = 5006016941e07929;
Qla0-SCSI-target - 1 = 5006016041e07929;FC Port information:
SCSI-qla0-port-0 = 50060160c1e07929:5006016941e07929:c302ef:81;
SCSI-qla0-port-1 = 50060160c1e07929:5006016041e07929:c303ef:82;Information about the SCSI LUN:
(Id: Lun) *-indicates the logical unit number is not registered with the operating system.
(0: 0): total reqs 12595 pending reqs 0, flags 0x0, 0:0:81 00
(1: 0): flags of reqs total 130, in anticipation of reqs 0, 0 x 0, 0:0:82 00So can someone indicate on WHAT I'm doing wrong? I am open to reinstall the operating system for the same version (LIKE 4u5 x86_64).
Thank you.
-
To load a png image using img_load_file()
I'm trying to load a png image file in my application to screen_blit later to a window. I have a few questions:
1. How can I find the full path to a file in my package?
2. can I use img_load_file to decompress a png in RGBA8888 fits the image uncompressed bitmap blitting. Someone at - it a code snippet, I can consult?
Thanks in advance.
Hello
Try the following steps to load the image file in your application.
First, add your image file in bar - descriptor.xml file in active tag
and give the path of the file as 'app/native/imagefilename. " I hope it will work for you.
-
Hi all
We get below error message in sites.log after registration of the dependencies before you make a call to the element.
sites.log
Error: Render: LogDep: none of these cases named "abc" pagename:xyz
Please let us know how to solve this problem:
Code snippet:
< render: logdep asset="abc deptype="exists"/>
< render: callelement elementname ="abc" >
<: the render argument name="arg1' value='val1'/>
< argument Render: name="arg2" value='val2'/>
< argument Render: name="arg3" value='val3'/>
< / rendering >
Thank you
Chantal
Here's the documentation - http://docs.oracle.com/cd/E29542_01/apirefs.1111/e39371/JSP/render-logdep.html
Please note that you can pass c & cid of any type of assets. If you are using active tags: load or assetset, you don't have to log on explicitly dependencies.
-
Set the ContextMenu in the FXML
Hi all
I use javaFX 2.0.2 (with Netbeans 7.1).
I found no plausible documentation on how to set a ContextMenu in file FXML. I found examples of code using setContextmenu(), but not he convret the info to FXML howto.
After several unsuccessful attempts (even assign the contextmenu control was not immediate), I found that the fxml structure below (at least) does not throw an error, but does not work either. I have just the textfield mouse click and nothing happens.
Is the tag < children > track or should I use another tag instead?<TextField text="OVERVIEW" style="-fx-padding: 5 5 5 5" GridPane.columnIndex="0" GridPane.rowIndex="0"> <children> <ContextMenu fx:id="contextMenuDB"> <items> <MenuItem text="Import" onAction="#ImportDB"/> <MenuItem text="Export" onAction="#ExportDB"/> <MenuItem text="Report" onAction="#CreateReport"/> </items> </ContextMenu> </children> </TextField>
What I have to do something (I mean coding) other than set the contextmenu in the FXML?
Thanks in advance for any comments.You must insert a tag of
between and . is a property, and is the value that you set for this property. -
Error function ValueList after migrating CF8 to CF10
Hi all
We are migrating our reports of CF8 to CF10. (uninstalled existing CF8 and installed CF10) in 32 bit OS.
After upgradation of CF10, tried to open our report, we got the below error.
----------------------error --------------------------
ValueList() function has a parameter that is not valid: 1 DS_ODBC_LIST.entry.Parameter of function ValueList which is now DS_ODBC_LIST.entry must point to a valid query name.
------------------error-----------------------
-------------original code -----------------------------------
< CFREGISTRY
ACTION = COUNT WITH ALL
NAME = "DS_ODBC_List".
TYPE = "ANY"
DIRECTION = "HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC. INI">
< cfset DSNnames = valueList (DS_ODBC_LIST. Entrance) >
-----------------------------original code--------------------------
Then tried to dump / print DS_ODBC_List using CFoutput/cfdump, then we got error like:
Variable DS_ODBC_LIST is not defined
in CF administrator the CFREGISTRY tag is in the list of active tags.
can anyone suggest me what the replacement tag / a patch, I can use to solve the problem?
Thanks in advance!
installilng mandate patch and fix-7 sold the question, thank you all
-
Update active field in flex active with JSP tags
Hello coders.
I am facing some problems when you try to set a field (field of active type) and then saving them, with WCS JSP tags.
The assets I am tempting to save is an asset of flex, I have found online and test the same business with the base, all assets very well. But with active flex, I just can't handle.
Does anyone of you can share a snippet as a reference?
Kind regards
Hello
I don't think that there is any particular jsp tag update Active flex. A certain attribute can be updated for flex assets using ics: catalogmanager, yet once, it is recommended not average at all.
So it's best to use Asset API (update section) discussed here - http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/asset_api_tutorial.htm#WBCSD2403
I have not tested but for your case, I think following should work (first check the implementation in a test environment):
a.getAttributeData("_
_").setDataAsList (tables. asList (new AssetIdImpl (" ", ))); In addition, do not know if active flex can be updated & saved by using the combination of tags - asset: charge, asset: together and active: save
Kind regards
Guddu
-
The name of the tag: "embed" not found in the currently active versions
How can I remove the error message displayed in it Validation of Dreamweaver:
The name of the tag: "embed" not found in the currently active versions. [HTML 4.0]
Extraction of tag reads:
< embed src = "about.swf" width = "615" height = "262" loop = "false" align = "absmiddle" bgcolor = "#FFFFFF" name = "about" allowscriptaccess = "sameDomain" allowfullscreen = "false" type = "application/x-shockwave-flash" pluginspage ="http://www.adobe.com/go/getflashplayer_fr" wmode = "transparent" quality = "high" >
Use the modern techniques of the recess. Here is a link to one of the newest...
-
Hello
I am trying to create a framework of active and wanted that she look like active frames the native BlackBerry apps where there is a label at the top of the active frame and icon at the top right.
I have sorted out etiquette:
Container { background: Color.Black opacity: 0.8 leftPadding: 10 rightPadding: 10 topPadding: 10 bottomPadding: 10 horizontalAlignment: HorizontalAlignment.Fill Label { text: qsTr("Useful Facts") textStyle.color: Color.White textStyle.fontSize: FontSize.Medium } }
But I don't know how to get my icon to sit in line with the label, like the image below. Also, what size the icon should be for both devices Q & Z and I'd be able to change the calibration in Momentics or I need to create more than two copies of the icon?
Thank you
Use a DockLayout
Then place the label first and second Image
The horizontal label LEFT and vertically CENTER
CENTER of RIGHT and vertically image Hor.
Maybe using translateX and translateY to justify
-
activation iPad 9.3.5 blocking bug
Sorry if this thread in the wrong section, I can't find the section support or tag you,
Ive updated my ipad 9.3.5 once ive power used for one day in empty battery.
then it restarts and now im on this activation of the lock screen but my apple ID does not.
screenshots:
1. no language > This means I already configure it.
2 NOTE: after 9.3.5 strings I could change the apple for a * s, even managed to download apps on it, then ipad ID drain its battery and restarted, it went to the lock of activation screen and does not my i.d.
Ive tried to log a * s , but does not, so I thought he came back to the previous owners i.d.
I heard that there is a bug like that when it updated to 9.x or older.
a * 6 is my aunt apple id and the previous owner, we have already made contact with apple on the recovery of this apple ID (case ID: *), and we managed to get password reset e-mail. but still do not accept.
I hope someone can help me with this, waiting for response from the apple support.
< personal information under the direction of the host >
MARK AS RESOLVED.
another successful apple ID to unlocked it.
Maybe you are looking for
-
Garmin does not connect after upgrade 9.3.2
I have a Garmin Frontrunner 235, which connects to my iPhone (5 s) via Bluetooth. It all worked perfectly until I upgraded my 5s to iOS 9.3.2 recently. Now the phone sometimes cannot 'see' the favourite, and even when he can, he refuses to connect.
-
My Windows Media Player does not recognize the CD burner someone has suggestions?
It happened once when I loaded the air I uninstalled it and it worked I loaded another music site and he did again once I uninstalled it and it still does not see my burner
-
Show the three electrical energy in the battery under Windows 7 instead of two
I am using Windows 7 on my laptop, and I usually spend between High Performance (when the power cable is in) and energy savings (when the power cable is not in). When I switch between patterns of consumption, I click the battery icon, and that brings
-
on my acer laptop my cursor jumps to the bottom of the page whenever I click anywhere to highlight the text or insert the words, corrections, etc. A FEW TIMES THIS APPLIES TO ONLY AREAS OF TEXT, APPARENTLY WITHOUT REASON OR MAYBE I ACCIDENTALLY HIT S
-
Useful general troubleshooting for printers papers.
I thought I would take the time to compile a list of documents useful generic troubleshooting. These documents do not have the specific steps for each printer, but they did not for most printers. Remember that it is always better to use documents w