AD locked status reconciliation

Is it possible to reconcile the account locked AD status?

Thank you

Hello

AD locked status may have to IOM help AD trust reconciliation or reconciliation AD target.
1 AD recon trust-> brings a locked status as long as TimeStamp, here you need a customization to analyse the value "1".
2. in target Recon-> works very well for the State locked and unlocked (analysis of connector STANDARD here the timestamp value '1' for the locked state).

Kind regards
Raghav.

Tags: Fusion Middleware

Similar Questions

Detect the lock status of the device?

How, it detects only the Blackberry (version 4.2 or higher) is currently blocked password?

Is there an event that is triggered when the device goes to:

-unlocked locked state (and)

-locked to the unlocked state

Thank you

Amit

See ApplicationManager.isSystemLocked ().

See also the MemoryCleanerListener interface. There is a past event to this listening port when the system is locked.

OIM 11g - reconciliation of the status of resource target
Hello

We work closely with IOM 11.1.1.5.2 and DBUM 9.1.0.4 and MSAD 9.1.1.7.
Commissioning and reconciliation seem to work fine, but we found that the State of the resource is not be compared on the console of the IOM.

For example, if supply us a user with an account of Oracle database, then lock the account on the database, when we run the reconciliation, the event is generated and finished with 'update succeeded', we go to the UD_DB_ORA_U table and find that the UD_DB_ORA_U_LOCK field has a value "BLOCKED." , then if we check the newspapers, we can see that the connector is properly mapping the State of resources with purpose of IOM status:

prepareTargetUsersRecordInOIMFormat: save the value: LOCKED
prepareTargetUsersRecordInOIMFormat: map: {OPEN = enabled 1 = Disabled, YES = Disabled, 0 = active, EXPIRED & LOCKED = Disabled No. = Enabled, LOCKED = disabled}
...
prepareTargetUsersRecordInOIMFormat: roValue: TEMPORARY_TABLESPACE_QUOTA
prepareTargetUsersRecordInOIMFormat: Temp RO value: null
prepareTargetUsersRecordInOIMFormat: reconData: [{default Tablespace = 27 ~ USERS, Authentication Type = PASSWORD, password = dummy, default Tablespace = 27 ~ USERS, Authentication Type = PASSWORD, password = dummy, Quota of Tablespace default = profile_name = 27 ~ USERS, resource = Oracle, user name is USPRUEBA65, temporary Tablespace = 27 ~ TEMP, account status is LOCKED, status = Disabled, Global DN =, privilege list is [], the list of roles = [{role Admin Option = number}] [{[{, role name =}], Quota of temporary Tablespace =}]
prepareTargetUsersRecordInOIMFormat: COMPLETED

But, even if reconciliation succeeded the administration shows console account status "Enabled" and when I check the table Ouedraogo, I see that the status of an object of the IOM is always enabled.

I found a few discussions on this issue, the closest was this one: reconciliation for users deleted on the target resource accounts but all it doesn't seem to be a great help because all the tasks described are already carried out by the installation of the connector (at least in the msad and dbum connectors).

This problem occurs both Active Directory and Oracle database users, maybe we missed something but based on the documentation for both connectors, we thought it was a STANDARD feature. Is there some setting of the connector or the property of the system, that we have to configure to make it work?

Thank you.

Published by: fmc on July 26, 2012 12:53
It should work OOTB. No need to write an adapter for it.
It works for me like OOTB waited.

Don't see you not received update reconciliation task inserted into the details of the profile of the users of resources? You have changed the status of the object mapping task in this task? It must be set to NONE.

Thank you
Patricia

SIM lock

I want to check my lock status. Help, please.

Contact AppleCare.

locked by default labels (function?)

Just upgraded to LV 2010 and I forgot to uncheck this option for the diagrams. I have created an indicator and could not move his label on the side, so I went back to tools > Options > block and unchecked it...

but the label still wouldn't move!

Then, I created a new indicator, and the label is of course mobile.

It sounds like a strange "characteristic". You want to be all labels to be locked or none, not only the new. Or at least offer an option!

My 2 cents,

X.

PS: I did not check if that was the case in previous versions but I guess.

The lock status of the position of the label is persistent. However, you can change the setting by selecting the label and right-click for this pop-up.

HP 7612: HP7612 Locked - how can I perform a full reset?

Without apparent reason, one of our HP7612 has posted locked by Admin and most of the functions are now disabled and showing that the locked. How can I reset it to clear this locked status and return our config network completely?

Hello @Karonia, greetings!

Thank you for reaching us on the forums of HP. I'm happy to help you

I will send you a private message with the steps to perform a reset on your printer. Please check your mailbox icon in the upper right of this page to view the message.

See you soon

MD3220i lock problem

Hi all

We have a strange problem with the md3220i.

The system is brand new, we opened the packages and the power of the system, but we have something strange with the newspapers. We cannot communicate with the controller. That's what we see in the papers:

How to solve this problem, do you have any ideas?

-=<###>=-
Instantiation of RAM rawfs, peripheral = 0 x 1
RAM DOSFS formatting
Instantiation of RAM rawfs, peripheral = 0 x 1
Formatting... Params volume consulted old 38% trust:
Volume settings: FAT type: FAT32, sectors per cluster 0
0 copies FATS, groups 0, 0 sectors per FAT
Areas reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, (null), serial number 10000 sysId
"Label:" «...» "
Drive with 1024 sectors of 512 bytes will be formatted with:
Volume settings: type FAT: FAT12, sectors per cluster 1
2 copies FAT, clusters of 1010, 3 sectors per FAT
Areas reserved 1, hidden 0, FAT sectors 6
Root dir entries sysId 112, VXDOS12, serial number 10000
"Label:" «...» "
Instantiation of RAM rawfs, peripheral = 0 x 1
Ok.

RTC error: Device real-time clock does not work

Autonomous 13884 symbols added.
Length: 0x13c bytes
Version ver03.0A

Reset, Power-Up Diagnostics - loop 1 1
Processor 3600 DRAM
Data lines 01 Passed
Address lines 02 Passed
NVSRAM 3300
Data lines 01 Passed
4410 Ethernet 1 82574
01 registry read Passed
Address lines 02 registry Passed
6 d 40 Bobcat
02 flash test passed
3700 PLB SRAM
Data lines 01 Passed
Address lines 02 Passed
7000 TO iSCSI BE2 1
01 registry read successful Test
02 registry address lines Test passed
Rows of data from registry 03 test passed
3900 real-time clock
01 RT Clock Tick past
Diagnostic Manager came out normally.

Current date: 15/01/14 time: 01:43:59

Send Change Service Interface rate or baud
15/01/14-09: 00:05 (NCDB): NOTE: set the Powerup State
15/01/14-09: 00:05 (NCDB): Normal sequence SOD, the 0 on controller
15/01/14-09: 00:05 (NCDB): NOTE: turn on seeing failure summary tray
15/01/14-09: 00:06 (NCDB): NOTE: installed protocols:<>
PS: RDMA ISER IPOIB >
15/01/14-09: 00:06 (NCDB): NOTE: the required protocols:<>
UNK >
15/01/14-09: 00:06 (NCDB): NOTE: loading of the flash file: iSCSI
15/01/14-09: 00:08 (NCDB): NOTE: DSM: current revision 7
15/01/14-09: 00:08 (NCDB): NOTE: SYMBOL: SYMbolAPI registered.
15/01/14-09: 00:08 (NCDB): NOTE: the total size of the Patriotic Army Rwandan RCBBitmapManager = 1778384896
15/01/14-09: 00:09 (NCDB): NOTE: in iscsiIOQLIscsiInitDq. iscsiIoFstrBase = x 0
1
15/01/14-09: 00:09 (NCDB): NOTE: loading of the flash file: MTLSEBET1G
Disabled the COMPLETE TRACE *.
15/01/14-09: 00:09 (NCDB): WARN: MTLSE: before size special mtl_create_pool:IO: 0 x
140
15/01/14-09: 00:09 (NCDB): NOTE: init: IOC: 0, PLVersion: 11-03-075-00
15/01/14-09: 00:10 (NCDB): WARN: MLM: failed to create m_MelNvsramLock
15/01/14-09: 00:10 (NCDB): WARN: MLM: failed to create m_MelEventListLock
15/01/14-09: 00:10 (NCDB): NOTE: CrushMemoryPoolMgr: platform and memory (CPU M
emSize: 2048), adjusted allocation size to 65536 for CStripes
15/01/14-09: 00:12 (NCDB): SOD: instantiation Phase complete
15/01/14-09: 00:11 (IOSched): NOTE: SAS Expander added: expDevHandle:x 11 enclHan
DLE:x 2 numPhys:37 port: 2 ioc:0 channel: 0 numEntries:22
15/01/14-09: 00:11 (NCDB): WARN: sodLockdownCheck: sodSequence update: CtlrLock
down
15/01/14-09: 00:11 (NCDB): caution: any attempt to open the inter communication controller
communication channels 0-0
15/01/14-09: 00:11 (NCDB): NOTE: LockMgr role is master
15/01/14-09: 00:12 (tSasExpChk): NOTE: Local Expander Firmware Version: 00.00.80
.10
15/01/14-09: 00:18 (tSasDiscCom): NOTE: SAS: full time of Initial discovery: 36
seconds since the last power on / reset, 10 seconds since the instantiated sas
15/01/14-09: 00:18 (NCDB): NOTE: baseName WWN 000290 b 1-1c1190ee (valid ==> SigMat
ch)
15/01/14-09: 00:18 (NCDB): NOTE: spmEarlyData: no data available
15/01/14-09: 00:18 (NCDB): NOTE: 2 Ut ServerEngines BladeEngine Firmware update
m v2.901.242.0
Copyright 2009 ServerEngines Corpo
15/01/14-09: 00:18 (NCDB): NOTE:
15/01/14-09: 00:18 (NCDB): NOTE: found card BE 0 x 0 to 2.0 bar1-base 0xf0200000
bar2-base 0xf0220000 dev 0x384292c
15/01/14-09: 00:18 (NCDB): NOTE: flash_rbver = 2.0.3.768
15/01/14-09: 00:18 (NCDB): NOTE: flash_armfwver = 2.901.319.0
15/01/14-09: 00:20 (NCDB): NOTE: ufi_rbver = 2.0.3.768
15/01/14-09: 00:20 (NCDB): NOTE: ufi_armfwver = 2.901.319.0
15/01/14-09: 00:20 (NCDB): NOTE: Flash on BladeEngine at 02:00 corresponds to UFI
BE2T1G
15/01/14-09: 00:20 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: 0 ins
tId 0
15/01/14-09: 00:20 (NCDB): NOTE: irq_ptr:0xd78850
15/01/14-09: 00:20 (NCDB): NOTE: BcmId [4] PCI [2.0.4]
15/01/14-09: 00:20 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:20 (NCDB): NOTE: IO BAR0 base 0xf0380000
15/01/14-09: 00:20 (NCDB): NOTE: BAR1 MEM base 0xf03a0000
15/01/14-09: 00:20 (NCDB): NOTE: BAR2 MEM base 0xf03c0000
15/01/14-09: 00:20 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x526fbc0 target bcmid:0 init bcmid: 4 rc 0, phba:0 x 5270020
15/01/14-09: 00:20 (NCDB): NOTE: target: irq_ptr:0x0xd780b0, func:0 0, bcmId:0 0 x x

15/01/14-09: 00:20 (NCDB): NOTE: VendorID, DeviceId 0x19a2 0 x 210 bcmId BDF 2.0 0
.0
15/01/14-09: 00:20 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:20 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd780b0, phba:0
x383fca0, func:0 x 0
15/01/14-09: 00:20 (NCDB): NOTE: BcmId [0] PCI [2.0.0]
15/01/14-09: 00:20 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:20 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:20 (NCDB): NOTE: BAR1 MEM base 0xf0200000 size 1
15/01/14-09: 00:20 (NCDB): NOTE: BAR2 MEM base 0xf0220000 size 1
15/01/14-09: 00:20 (NCDB): NOTE: BAR4 MEM base 0xf0240000 size 1
15/01/14-09: 00:20 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:21 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47392fe00 size 167
77216 (ConIO-size 16777216) recorded for the pre-post on port 0 data buffers
15/01/14-09: 00:21 (NCDB): WARN: MTLSE: default link on the interface-local address
1 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 41
15/01/14-09: 00:21 (NCDB): WARN: MTLSE: default link on the interface-local address
5 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 41
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: default link on the interface-local address
6 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 41
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 0 rc
0
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 0 rc 0
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: 1 ins
tId 1
15/01/14-09: 00:22 (NCDB): NOTE: irq_ptr:0xd78668
15/01/14-09: 00:22 (NCDB): NOTE: BcmId [3] PCI [2.0.5]
15/01/14-09: 00:22 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:22 (NCDB): NOTE: IO BAR0 base 0xf03e0000
15/01/14-09: 00:22 (NCDB): NOTE: BAR1 MEM base 0xf0400000
15/01/14-09: 00:22 (NCDB): NOTE: BAR2 MEM base 0xf0420000
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x5d3a280 target bcmid:1 init bcmid: 3 rc 0, phba:0x5d40060
15/01/14-09: 00:22 (NCDB): NOTE: target: irq_ptr:0x0xd77ec8, func:0 x 1, bcmId:0 x 1

15/01/14-09: 00:22 (NCDB): NOTE: VendorID, DeviceId 0x19a2 0 x 210 bcmId 1 BDF 2.0
.1
15/01/14-09: 00:22 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:22 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd77ec8, phba:0
x38403b0, func:0 x 1
15/01/14-09: 00:22 (NCDB): NOTE: BcmId [1] PCI [2.0.1]
15/01/14-09: 00:22 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:22 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:22 (NCDB): NOTE: BAR1 MEM base 0xf0260000 size 1
15/01/14-09: 00:22 (NCDB): NOTE: BAR2 MEM base 0xf0280000 size 1
15/01/14-09: 00:22 (NCDB): NOTE: BAR4 MEM base 0xf02a0000 size 1
15/01/14-09: 00:22 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:23 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47492fe00 size 167
77216 (ConIO-size 16777216) recorded for the pre-post on port 1 data buffers
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: default link on the interface-local address
2 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 42
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: default link on the interface-local address
7 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 42
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: default link on the interface-local address
8 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 42
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 1 rc
0
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 1 rc 0
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: ins 2
tId 2
15/01/14-09: 00:23 (NCDB): NOTE: irq_ptr:0xd78480
15/01/14-09: 00:23 (NCDB): NOTE: BcmId [2] PCI [2.0.6]
15/01/14-09: 00:23 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:23 (NCDB): NOTE: IO BAR0 base 0xf0440000
15/01/14-09: 00:23 (NCDB): NOTE: BAR1 MEM base 0xf0460000
15/01/14-09: 00:23 (NCDB): NOTE: BAR2 MEM base 0xf0480000
15/01/14-09: 00:24 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x8d1bb00 target bcmid:2 init bcmid: 2 rc 0, phba:0x8d1e060
15/01/14-09: 00:24 (NCDB): NOTE: target: irq_ptr:0x0xd77ce0, func:0 x 2, bcmId:0 x 2

15/01/14-09: 00:24 (NCDB): NOTE: VendorID, DeviceId 0x19a2 210 bcmId 0 x 2 BDF 2.0
.2
15/01/14-09: 00:24 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:24 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd77ce0, phba:0
x3840ac0, func:0 x 2
15/01/14-09: 00:24 (NCDB): NOTE: BcmId [2] PCI [2.0.2]
15/01/14-09: 00:24 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:24 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:24 (NCDB): NOTE: BAR1 MEM base 0xf02c0000 size 1
15/01/14-09: 00:24 (NCDB): NOTE: BAR2 MEM base 0xf02e0000 size 1
15/01/14-09: 00:24 (NCDB): NOTE: BAR4 MEM base 0xf0300000 size 1
15/01/14-09: 00:24 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:25 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47592fe00 size 167
77216 (ConIO-size 16777216) registered for the data pre-post on port 2 buffers
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: default link on the interface-local address
3 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 43
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: default link on the interface-local address
9 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 43
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: default link on the interface-local address
10 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 43
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 2 rc
0
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 2 rc 0
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: ins 3
tId 3
15/01/14-09: 00:25 (NCDB): NOTE: irq_ptr:0xd78298
15/01/14-09: 00:25 (NCDB): NOTE: BcmId [1] PCI [2.0.7]
15/01/14-09: 00:25 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:25 (NCDB): NOTE: IO BAR0 base 0xf04a0000
15/01/14-09: 00:25 (NCDB): NOTE: BAR1 MEM base 0xf04c0000
15/01/14-09: 00:25 (NCDB): NOTE: BAR2 MEM base 0xf04e0000
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x8e829a0 target bcmid:3 init bcmid: 1 rc 0, phba:0x8e86060
15/01/14-09: 00:25 (NCDB): NOTE: target: irq_ptr:0x0xd77af8, func:0 x 3 bcmId:0 x 3

15/01/14-09: 00:25 (NCDB): NOTE: VendorID, DeviceId 0x19a2 0 x 210 bcmId 3 BDF 2.0
.3
15/01/14-09: 00:25 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:25 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd77af8, phba:0
x38411d0, func:0 x 3
15/01/14-09: 00:25 (NCDB): NOTE: BcmId [3] PCI [2.0.3]
15/01/14-09: 00:25 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:25 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:25 (NCDB): NOTE: BAR1 MEM base 0xf0320000 size 1
15/01/14-09: 00:25 (NCDB): NOTE: BAR2 MEM base 0xf0340000 size 1
15/01/14-09: 00:25 (NCDB): NOTE: BAR4 MEM base 0xf0360000 size 1
15/01/14-09: 00:25 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:26 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47692fe00 size 167
77216 (ConIO-size 16777216) registered for the data pre-post on port 3 buffers
15/01/14-09: 00:26 (NCDB): WARN: MTLSE: default link on the interface-local address
4 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 44
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: default link on the interface-local address
11 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 44
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: default link on the interface-local address
12 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 44
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 3 rc
0
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 3 rc 0
15/01/14-09: 00:27 (NCDB): SOD: pre to complete initialization Phase
15/01/14-09: 00:39 (NCDB): WARN: CmgrLockdownException: OF CORRUPTION of the DBM DATABASE
COPYRIGHTS - LOCKDOWN Type = 6
15/01/14-09: 00:39 (NCDB): NOTE: ACS: necessary Acs on Alt: no, StateCode: 6, Reas
onCode = 12
15/01/14-09: 00:39 (NCDB): NOTE: ACS: icon alternate ping failed:-2, RESP.:
0
AcsCommunicator::getInstance() indeterminate Mode, using DOMI
15/01/14-09: 00:39 (NCDB): WARN: ACS: altValidateStagedFirmware(): Domi outstanding
taken on: IconSendInfeasibleException error
15/01/14-09: 00:40 (NCDB): SOD: initialization of synchronization of the Code Phase complete
you
15/01/14-09: 00:39 (NCDB): WARN: case - CORRUPTED DB Lockdown. VPN did not update
of Sstor.
15/01/14-09: 00:40 (NCDB): SOD: initialization Phase complete
==============================================
Title: Disk Array Controller
Copyright 2008 - 2012 NetApp, Inc.. All rights reserved.

Name: RC
Version: 07.84.44.60
Date: 25/10/2012
Time: 14:41:57 CDT
Models: 2660
Manager: devmgr.v1084api04.Manager
==============================================

15/01/14-09: 00:39 (NCDB): NOTE: available symbol
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: * WARNING!
**
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: * this controller is locked because of the detec
Ted *.
15/01/14-09: 00:39 (NCDB): WARN: * bribery in the primary database.
**
15/01/14-09: 00:39 (NCDB): WARN: * in order to avoid any loss of configuration.
the *.
15/01/14-09: 00:39 (NCDB): WARN: * backup database must be restored.
**
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:40 (NCDB): SOD: sodComplete complete Notification
15/01/14-09: 00:40 (NCDB): sodMain CtlrLockdown sequence complete, elapsed time
= 35 seconds
15/01/14-09: 00:40 (NCDB): full sodMain
15/01/14-09: 00:39 (NCDB): WARN: sequence of lockdown SOD full - suspension...

If you have the serial cable or reset password cable as the manuals refer to it, you can remove the lock status. I know that this command works, but only if you are able to enter commands in the CLI by the serial port. If she will accept the orders, you will see a-> when you press on enter. The clear locking control is lemClearLockdown I believe. It can be so lemClearlockdown.

These controllers go in many States of lockdown too easy if you ask me... I fight 10 + MD32XX units right now. Although I can't enter commands in the CLI, it enters just text and does not recognize it as any kind of order. I hope that you are not as lost as mine, I've got one under warranty, so I'm about to call Dell technical support. I'll post an update when I'm done crying.

Good luck

Number lock, win 8 (64-bit), staying on after re-booting

> The registry editor

> HKEY_USERS

>. DEFAULT

> Control Panel

> Keyboard

> InitialKeyboardIndicators

> Type REG_SZ

> Data 2147483648

How can I get the blocking number feature to stay after restart?

Hi Roslyn,

By default the NUM LOCK status remains the same, because when you turn off the computer. If it is on when you shut it down it will be on when you turn on the computer again.

You must change the InitialKeyboardIndicators value for 2 to 0 to have the Num Lock key on after restart.

Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

a. go to The start screen and type regedit.

b. Select regedit and then right click on the screen.

c. click on run as administrator.

d. find and click on the key or the subkey that you want to back up.

e. click on the file menu and then click export.

f. in the area Save in , select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.

g. click Save.

You can also activate the number lock from the BIOS.

Warning: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Follow these steps to do so.

a. press F12 or F10 to enter in the Start Menu.

Note: It may be different. You need to check on the first display screen.

b. in the Menu of Boot Device , select the System Configuration

(c) in the left side of the screen, expand the category behavior POST

d. search for Num Lock key option

e. press enter , and then make the changes to turn on the Num Lock or

f. Exit and restart the computer.

Let us know if you have any additional questions.

Keep exit status listener on the change, but watch without any error

Hello
I once again re installed oracle grid. Through the status of the listener, I find that the status of the listener is evolving with different outputs.
In the first when I typed lsnrctl status then it's what he showed: -.
[grid@example ~] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2015 10:29:05
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date February 4, 2015 08:59:42
Uptime 0 days 1 hour 29 minutes 23 seconds
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file
The listener log file /U01/app/grid/diag/tnslsnr/example/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.com) (PORT = 1521)))
Summary of services...
Service "Orcl" has 1 instance (s).
Instance "Orcl", State LOAN, has 1 operation for this service...
Service 'OrclXDB' has 1 instance (s).
Instance "Orcl", State LOAN, has 1 operation for this service...
The command completed successfully
Once again, after waiting a few minutes, I checked again the status of the listener, then it's what she showed. It shows now the Instance "Orcl", BLOCKED status

[grid@example ~] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2015 10:31:24
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date February 4, 2015 08:59:42
Uptime 0 days 1 hour 31 min 42 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file
The listener log file /U01/app/grid/diag/tnslsnr/example/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.com) (PORT = 1521)))
Summary of services...
Service "Orcl" has 1 instance (s).
Instance "Orcl", LOCKED status, has 1 operation for this service...
The command completed successfully
Once again, after waiting a few minutes, I checked again the status of the listener, then it's what she showed. It now shows the Instance "Orcl", status RESTRICTED
[grid@example ~] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2015 10:31:36
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date February 4, 2015 08:59:42
Uptime 0 days 1 hour 31 min 54 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file
The listener log file /U01/app/grid/diag/tnslsnr/example/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.com) (PORT = 1521)))
Summary of services...
Service "Orcl" has 1 instance (s).
Instance "Orcl", RESTRICTED status, has 1 operation for this service...
The command completed successfully
After a few minutes back I rechecked the status and now it shows nothing: -.
[grid@example ~] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2015 10:31:20
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date February 4, 2015 08:59:42
Uptime 0 days 1 hour 31 min 38 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file
The listener log file /U01/app/grid/diag/tnslsnr/example/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.com) (PORT = 1521)))
The listener supports no services
The command completed successfully
So in short here put it: -.
FIRST EXIT
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.com) (PORT = 1521)))
Summary of services...
Service "Orcl" has 1 instance (s).
Instance "Orcl", State LOAN, has 1 operation for this service...
Service 'OrclXDB' has 1 instance (s).
Instance "Orcl", State LOAN, has 1 operation for this service...
The command completed successfully
SECOND RELEASE OF THE STATUS OF THE LISTENER
Summary of services...
Service "Orcl" has 1 instance (s).
Instance "Orcl", LOCKED status, has 1 operation for this service...
The command completed successfully
THIRD EXIT OF THE LISTENER STATUS
Summary of services...
Service "Orcl" has 1 instance (s).
Instance "Orcl", RESTRICTED status, has 1 operation for this service...
FOUR OR THE LAST EXIT OF THE STATUS OF THE LISTENER
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.com) (PORT = 1521)))
The listener supports no services
HERE IS THE RESULT OF THE HOSTNAME
NOTE: ping hostname tells a different IP in the budgetary balance real ip given on the host name is 192.168.0.1
[grid@example ~] $ ping hostname
PING hostname.com (69.43.160.216) 56 (84) bytes of data.
64 bytes of 69.43.160.216: icmp_seq = 1 ttl = 44 time = 337 ms
64 bytes of 69.43.160.216: icmp_seq = 3 ttl = 44 time = 335 ms
^ C
-hostname.com ping statistics-
4 packets transmitted, 2 received, 50% packet loss, time 3899ms
RTT min/avg/max/leg = 335.532/336.382/337.233/1.029 ms
[grid@example ~] $ ping example.com
PING example.com (192.168.0.1) 56 (84) bytes of data.
64 bytes of example.com (192.168.0.1): icmp_seq = 1 ttl = 64 time = 0,033 ms
64 bytes of example.com (192.168.0.1): icmp_seq = 2 ttl = 64 time = 0.035 ms
64 bytes of example.com (192.168.0.1): icmp_seq = 3 ttl = 64 time = 0.038 ms
64 bytes of example.com (192.168.0.1): icmp_seq = 4 ttl = 64 time = 0.038 ms
HERE IS THE OUTPUT for sqlnet.ora, listener.ora, tnsnames.ora
[grid@example admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/11.2.0/grid/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/grid
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent
[grid@example admin] $ more sqlnet.ora
sqlnet.ora # Network Configuration file: /u01/app/11.2.0/grid/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
ADR_BASE = / u01/app/grid
[grid@example admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/11.2.0/grid/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = example.com) (PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
[grid@example admin] $

Hello

Sorry can't answer you earlier. I have soved the issue of the listener. In fact, there were two issues one of them was the problem of the LISTENER and the other was the following: -.

SQL > startup

ORA-01078: failure in the treatment of system settings

LRM-00109: could not open the parameter file ' / u01/app/oracle/product/11.2.0/db_1/dbs/initorcl.ora'ORA-01078:

First of all, I solved the ORA-01078: LRM-00109: deliver and then I went to solve the problem of the LISTENER. Here is how I solved the problem LISTNER. It now displays the stable state. It does not change like the one I mentioned above: -.

[grid@example ~] $ cd $ORACLE_HOME/network/admin

[grid@example ~] $ cd /u01/app/11.2.0/grid/network/admin/

[grid@example admin] $ [grid@example admin] $ ls-l

Total 24

-rw - r - r - 1 grid oinstall 166 6 Feb 10:06 listener15020610AM0614.bak

-rw - r - r - 1 grid oinstall 436 6 Feb 10:11 listener.ora

drwxr-xr-x 2 grid oinstall 4096 2 February 14:16 samples

-rw - r - r - 1 grid oinstall 205 11 May 2011 shrept.lst

-rw - r - r - 1 grid oinstall 202 6 Feb 10:09 sqlnet.ora

-rw - r - r - 1 grid oinstall 322 6 Feb 10:07 tnsnames.ora

[grid@example admin] $ rm - rf *.ora

NETCA $ [grid@example admin]

Configure the listener again

Set up the Configuration of the Local Network Service name

lsnrctl stop $ [grid@example admin]

lsnrctl start $ [grid@example admin]

[grid@example admin] $ lsnrctl reload

RESTART THE PC

Connect as a user of network and wait a few minutes... And then check the status... Its not working now, and displays the output of status statble: -.

[grid@example admin] $ lsnrctl status

LSNRCTL for Linux: Version 11.2.0.3.0 - Production on February 6, 2015 11:20:09

Copyright (c) 1991, 2011, Oracle. All rights reserved.

Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=example.com) (PORT = 1521)))

STATUS of the LISTENER

------------------------

Alias LISTENER

Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production

Start date February 6, 2015 10:19:34

Uptime 0 days 1 hour 0 minutes 35 seconds

Draw level off

Security ON: OS Local Authentication

SNMP OFF

Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

The listener log file /U01/app/grid/diag/tnslsnr/example/listener/alert/log.XML

Summary of endpoints listening...

(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.com) (PORT = 1521)))

(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

Summary of services...

Service '+ ASM' a 1 instance (s).

Instance '+ ASM' READY State, has 1 operation for this service...

Service "Orcl" has 1 instance (s).

Instance "Orcl", State LOAN, has 1 operation for this service...

Service 'OrclXDB' has 1 instance (s).

Instance "Orcl", State LOAN, has 1 operation for this service...

The command completed successfully

[grid@example admin] $

Where did the "number lock" led on my dv6-6170sl?

Is it possible that the keyboard dv6-6170sl does not have an led indicating the num lock status?

If so, it's very uncomfortable

I checked the Manual:

http://h10032.www1.HP.com/CTG/manual/c02842252.PDF

No seeing bright numlock I can say

Significance of the function of the 'ACTIVITY' OF AR_RECEIVABLE_APPLICATIONS_ALL status
Hello
Need to know (because, of course, we have a problem), what is the meaning of the STATUS, value 'ACTIVITY' OF AR_RECEIVABLE_APPLICATIONS_ALL fied.

I know that all these values:
APP - applied
UNAPP - délettrée
VAC - in account
UNID - unidentified
ACTIVITY - debtors
ANOTHER ACC - another receiving Application

But from the user point of view, I can not explain this value. (need to know, because we have a 'locked' status).

Any body can help me please?

THX
Concerning
Hello

Please go through the following note Id:

Electronic refund Transactions are not captured by General Ledger transfer [ID 456117.1]

Kind regards
Aimée

FDM API to check the POV is locked or not
Hello

Can anyone help on how to create a script to check if the FDM POV is locked or not?
I want to write a script that read a file of data, then go on the POV in the data file to FDM
and check if the POV in FDM is locked or not. Any guide / tips will be useful.
Thank you.
The web client is not enough for relatively complicated event scripts and Custom. You must use Workbench to modify these scripts. In Workbench, an accelerator that defines exactly how to recover the lock status of POV there.

Checking the status of block to a block so the cursor is in a block of diiferent
Hey guys,.
I'm sure many of us have encountered this situation before. I have 2 different blocks (B1 and B2) in my form. Block B1 is a single record block while B2 block is a block of several record. I noticed that when I update an existing record in my block B2, something has changed in my block B1. I don't know what changed, but the status of block B1 = "CHANGED". There's a trigger when a validation in one of block B2 elements. Now, if I insert a new record into the block B2, then nothing changes in the B1 block.

Now, there is nothing very obvious which seems to be updated to block B1. So I'm trying to understand when block B1 status changes to REQUEST to CHANGE because I can't really block B1 navigate When-Validate_item to check the status of the block. I'll try with Next-key to see if nothing changes in the B1 block in the meantime.

So, I moved the WVI key-Next-Item trigger and made a Go_Block ('B1') and printed the status of block B1 and has "CHANGED". I printed the lock status on the first line of key-Next-item proving that nothing in KNI has changed the State of the B1 blocking. So I have some block-level triggers such as:
```
WHEN-NEW-BLOCK-INSTANCE
WHEN-VALIDATE-RECORD
PRE-QUERY
POST-QUERY
ON-LOCK
ON-UPDATE
ON-DELETE
ON-INSERT
PRE-RECORD
WHEN-NEW-RECORD-INSTANCE
```
Any ideas?

Thank you

Published by: RDonASnowyDay on March 15, 2010 11:27
If it happens only for existing records and not for new, I'd vote for the POST QUERY relaxation. As you only have a few triggers I would try to eliminate them one by one and check when it starts to work.

How to install this update and resolve problems of USB and the touchpad?

I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
Driver revision history:
Twinhan VP704A Driver Release Notes
-------------------------------------------------------------------------------
Note:
1. in the event that the system hangs when running with VP704A, please install ULI
Host USB 2.0 in \ULiUSB20Driver driver

2. for XP/SP1, please update with the patch in

3. in XP/SP1, update driver will crash the system, while the new facility is ok.
The trick to update driver XP/SP1 is illustrated in the following steps,
a. uninstall the driver
b. disconnect and reconnect the USB device
c. install the driver
4 to support the controller remotely, please launch Agent.exe in \Agent.
Further details at \Agent\Readme.txt

Known issues:
1 multi-instance is not supported
2 remote wakeup is not supported
3. strong use of the processor from analog video/audio capture
4. bad Signal using color YUY2 format IST
5 AV sync if audio captured the wrong filter.
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
6. noise with analog TV and FM Radio
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

Driver revision history:
-------------------------------------------------------------------------------
2005-10-24, version: 1.0.2.8
Bugs fixed and new features:
1 is not correctly configured.
-------------------------------------------------------------------------------
2005-10-21, version: 1.0.2.7
Bugs fixed and new features:
1. the firmware version read FLASH OK!
-------------------------------------------------------------------------------
2005-10-14, version: 1.0.2.6
Bugs fixed and new features:
1.MUtil - access driver empty part lower part of screen when IST!
2.MUtil - access HCT pilot check fix crash!
-------------------------------------------------------------------------------
2005-10-07, version: 1.0.2.5
Bugs fixed and new features:
1 tuner turns off when S-Video, Composite.
-------------------------------------------------------------------------------
30/09/2005, version: 1.0.2.4
Bugs fixed and new features:
1.agent.exe update for repeat bug!
2.TI5150 sign up to fix video Format!
-------------------------------------------------------------------------------
2005-09-29, version: 1.0.2.3
Bugs fixed and new features:
1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
2 reset TI5150 when a new frequency is defined
-------------------------------------------------------------------------------
2005-09-27, version: 1.0.2.2
Bugs fixed and new features:
1. difficulty I2C unstable access on some devices.
-------------------------------------------------------------------------------
2005-09-23, version: 1.0.2.1
Bugs fixed and new features:
1. analog TV becomes sometimes darker.
-------------------------------------------------------------------------------
15/09/2005, version: 1.0.2.0
Bugs fixed and new features:
1. difficulty of installation INF for Windows 2000.
2 FM scan radio policy changed!
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.9
Bugs fixed and new features:
1 USB string serial number not visible with USBView, updated firmware required.
2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.8
Bugs fixed and new features:
1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
-------------------------------------------------------------------------------
12/09/2005, version: 1.0.1.7
Bugs fixed and new features:
1. improve the performance of check channel lock status
2 pinnacle INF Fix.
-------------------------------------------------------------------------------
2005-09-09, version: 1.0.1.6
Bugs fixed and new features:
1. Add an audio initialization function.
-------------------------------------------------------------------------------
2005-08-31, version: 1.0.1.5
Bugs fixed and new features:
1 separation of PAL and NTSC resolution mode.
-------------------------------------------------------------------------------
2005-08-30, version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2 frame drop.
3 pinnacle inf file HCT chkinf fail.
-------------------------------------------------------------------------------
2005-08-22, version: version 1.0.1.3
Bugs fixed and new features:
1. add remote control interface in digital source filter.
2.A new remote test tool that contains of the source code in \Test_RC.
-------------------------------------------------------------------------------
2005-08-16, version: 1.0.1.2
Bugs fixed and new features:
1. Pinnacel & Twinhan driver & file reorg.
2.VP704A_BDA_Test tool, add a test to the system code.
3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
4 firmware update
-------------------------------------------------------------------------------
2005-08-15, version: 1.0.1.1
Bugs fixed and new features:
1 serial number feature is lost when the audio volume of the TV control
2.RC6A support CIR
(This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
EEPROM must be flashed with \Firmware\M9207.bin)
3 Serieal, MAC address and name of device OEM taken in charge.
Please see for more details on the \Firmware\readme.txt.
4 Ioclt example source code included.
-------------------------------------------------------------------------------
08/08/2005, version: 1.0.0.10
Bugs fixed and new features:
1. increase audio volume analog TV.
-------------------------------------------------------------------------------
04/08/2005, version: 1.0.0.9
Bugs fixed and new features:
1. analog TV Video mode failed.
-------------------------------------------------------------------------------
2005-08-03, version: 1.0.0.8
Bugs fixed and new features:
1.off - centerf frequency scan + / 125Khz
2 difficulty program a copy scanned in MCE.
-------------------------------------------------------------------------------
02/08/2005, version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
2. improve the stability of I2C communication.
3 unify signaling resistance & quality as a THBda ioctl interface.
4 capture filter lock state control.
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.5
Bugs fixed and new features:
1. the same strength & quality signals as VP7046.
2 debug build pilot
-------------------------------------------------------------------------------
2005-07-21, version: 1.0.0.4
Bugs fixed and new features:
1. put the INF update.
-------------------------------------------------------------------------------
2005-07-20, version: 1.0.0.3
Bugs fixed and new features:
1 improve performance in PCM4
2 passage of the analog TV Mode to FM Mode failure
-------------------------------------------------------------------------------
2005-07-04, version: 1.0.0.2
Bugs fixed and new features:
1. production tool FM test OK!
--------------------------------------------

And here is the Readme file from the other file in the update?

************************************************** ************************************************
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
************************************************** ************************************************

----------------
INTRODUCTION
----------------

This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
and Windows XP.

-------------------------
CONTENTS OF THIS DOCUMENT
-------------------------

1. installation instructions
2. uninstall instructions

----------------------------
1. installation instructions
----------------------------

(Windows 98SE & Windows ME)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files in your Windows system, and then restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.

B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files to your Windows system, then turn off your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.

(Windows 2000)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.

(Windows XP)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-Click "NEXT".
-This program will install and load the driver and you do not have to restart the
computer.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller', proceed with the installation.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.

Notice:
If you can not configure driver successfully. Please restart your system, then follow
steps to reinstall driver above.

------------------------------
2. uninstall instructions
------------------------------

1. open the "Control Panel" folder.
2 call the "Add/Remove Programs" icon
3 choose the "ULi USB2.0 Driver" section.
4. click on the "add/delete" button to remove drivers.

-----------------------------------
Change list:
-----------------------------------
1.74
1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
2. support all USB2.0 Host Controller.
1.73
1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
4 solve problem as wirless lan will disconect when the plug in usb device.

1.72
1 fix that system crash when HD USB copy large files.

1.71
1. improve the management of power in Win98 / Me.

1.70
1. improve the devcie detection function.

1.62
1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

1.61
1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

1.60
1. in support of functions power management when a HUB with the USB plug in device
a root HUB.

1.57
1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
2. fix audio problem that can not display smooth when peripheral USB connect to the system.
3. fix system cannot detect DVICE USB when the USB device attached to the system in
suspend mode.
4 fix when root USB HUB have a full load, USB HD sometimes
failure of the transaction.

1.56
1 fix that device of DVD decoder cannot display correctly.

1.55
1. fix OTI USB 2.0 drive hand cannot detect question.
2. attach the USB mouse cannot be used after the resumption of hanging.

1.54
1. to improve the safety of the driver.

1.53
1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

1.52
1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
automatically fix file system errors
2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

v.1.51
1. to improve the compatibility of USB 2.0 card reader.
2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

v1.50
1. improve the transfer block

v1.48
1. difficulty of installation of the USB 2.0 LAN driver hangs up
2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
3. fix some laptops starting hanging Win98SE

v1.47
1. improve the performance of bulk transfer.
2. fix the failure of USB 2.0 Preview in bulk webcam.

v1.46
1. support USB 2.0 and 1.1 devices isochronous
2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
4. improve the capacity of the device detection in Win9X / ME

v1.45
1. fix system hang up when the mode standby ACPI.
2. attach the mouse sometimes does not disappear when it is unplugged.
3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

v1.44
1. composite crutch
2 improve the detection of devices

v1.43
1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
2 difficulty at high peripheral speed detected as full-speed device
3. fix some problem of failure detection USB mouses
4. fix some problem USB 2.0 Hub failure detection
5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

v1.42
1. fix PC Card eject hang up in Win98 / ME
2 difficulty of interruption/resumption hang up in Win98
3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
4. fix some failure detection of PC Card USB 1.1 devices

v1.41
1. Add new feature that system can install the driver ahead of the device is plugged in.
2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

v1.40
1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

v1.32
1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
If the path of the OS is not c:\windows.
2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

v1.31
1. Fix problem that driver cannot install on Windows 2000.

v1.30
1 fix than Win9X / shows ME no USB 2.0 hub.
2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
3 Fix problem that sometimes when you click on "search the hardware changes.
for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
file is not found.
4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
verison of ULi EHCI controllers devices are connected and disconnected.
5 install the driver support for several features of controller EHCI ULi existing on
system at the same time.
6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

v1.20
1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

ULi Coporation. (ULi) web sites:
http://www.Uli.com.tw/ (Taiwan)

CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

It is said above 2 relevant and 1 right ANSWER available...

I'm new here, so anyone could direct me to these answers?

Lost IPhone iPhone up to what it is unlocked. Please urgent block my iphone

Device IMEI:	***********
Serial number:	C7 * 5N0
Description of the product:	iPhone 6 Gold 128GB
Technical support by phone:	90 days of telephone Support
Expiration date of phone support:	January 5, 2016
Warranty (repairs and service coverage):	Limited warranty
Estimated purchase date:	June 10, 2015
Status of "find my iPhone":	WE
Country of purchase:	Saudi Arabia
Last country enabled SIM:	Bangladesh
Last active carrier:	GramenPhone - Bangladesh
SIM lock status:	Unknown
Advanced control of IMEI:	Use our paid service to make progress of IMEI information!

Nobody here can do for you.

Has been the iPhone set up to find my IiPhone on iCloud?

If yes you can lock.

If this is not the case, no one can lock.

AD locked status reconciliation

Similar Questions

Maybe you are looking for